REPAIR/REPLACEMENT OF DOORS WINDOWS AND CUPBOARD AT MAP ACCN AND OTHER AREA AND REPAIR OF MISC B/R ITEMS IN ZONE E AND F IN THE AREA OF AGE B/R-II UNDER GE (W) LUCKNOW

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L mild steel work as in bands, straps, supports or clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.(Note: stainless steel butt hinges shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.complete all as specified and directed by Engr -In - Charge.

S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I complete all as specified and directed.

Supply and Fixed Box type steel window comprise of tubler frame & shutters made out of 1.2mm thick MS sheet tube facing madeDouble size shutter , glass, gauged shutter (glass panes and wire mesh only shall be made and paid seprately ) with side hung shutter,with steel handle steel, peg stay peg stay steel, dovetailed or welded including two nos of Tower bolt 150mm for each leaf and 10mm sq bars grills at specing as shown on drawing or directed by Engr - in - charge welded to FI frame work including other fitting hinges handles ,tarrd hold fast, PCC block etc complete all as specified and directed by Engr -In - Charge. approved by Engr -in -charge.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge complete all as specified and directed. (Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh Grade 304 (SS) as approved by GE shall deemed to be included in quoted rate and No extra payment will be made separately. 2. No extra payment for variation in section will be made for section profiles of higher sizes.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S & F in powder coating (Thickness or powder coating not less than 50 micron) anodised aluminium.window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg /m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) and 100mm long tower bolt (2 Nos ) for each shutter complete all as specified

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Framed work such as Anodised aluminium grills,(anodised transprant or dyed to required shade according to IS 1868 with minimum anodic coating off grade AC 15 ) of approced design/pattern with approved standard sanction and fixed to the existing window frame with c.p brass /stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as per direction of engr in charge

Taking down & refixing Aluminium Door/window shutters of any description exc 1sqm and n exc 2 Sqm in the same opening after making change un serviceable fitting including locks et and make good in all respect complete all as specified and directed.

Taking down & refixing shutters of any description exc 1sqm and n exc 2 Sqm in the same opening after making un serviceable fitting and making good complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and directed.

S & F WPC kitchen cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination and one side balancing lamination sheet consisting of carcass 18mm thick WPC sheet & provision of shutters made out of 18mm thick one side decorative laminated WPC sheet all required brackets stainless steel screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 dgree edge bent finish including all necessary fittings as per site requirement and as per make and specification mentioned as per drawing and complete all as specified and as directed by GE.

S & F auto concealed hinges of size 103m x 64 mm x 28 mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.

S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel grade 304 wire staples or moulded beading complete all as specified and directed.

Material and Labour for 4 mm thick figured glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

Material and Labour for 4 mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repair 0.36 mm dia stainless steel grade 304 wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L, 15mm thick rendering in CM (1:6) on fair faces of brick/concrete surfaces, finished even and fair complete with including taking down cement plaster complete all speciified and directedall as specified.

M&L for preparation of old surface of walls and applying one coat of cement base paint complete all as specified and directed.

M&L preparation of New plastered surface of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty complete all as specified and directed.

Supply and fixed Toughned glass 12 mm thick as in hinged doors , partition automatic doors and similar work including cutting to shape , drilling hole required and two Nos 300mm long SS handle "D" type including patches fittings and one mortice lock in each door complete all as specified and directed.

S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed..

Taking down & re fixing floor spring Tuffen Glass Door shutters after repair/replacement floor spring, patches etc of any description exc 1.5 Sqm in the same opening after making change un serviceable fitting like hinges (top and bottom), locking arrangement , handles etc and make good in all respect complete all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers ®complete all as specified and directed.

Supply and fixed in repair heavy duty drawer channel/slider in cupboard drawers complete all as specified and directed.

Taking down & refixing Steel Door of any description exc 1.5 sqm in the same opening after making welding , wire gauge, bolts hinges etc change unserviceable fitting including locks et and make good in all respect complete all as specified and directed.

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces mixed with water proofing compound in cement mortar 1:6 finished even and fair complete all as specified and directed.

M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) as in surface channels and drains.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed

Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends complete all speciified and directed

Labour only for cleaning of existing drain of size 30 to 60 cm wide and depth not exc 1.00 m by taking out all muds, silt , sludge , foreign material, sand, ashes, fiber grease , night soils etc and removing the same from out side of MOD land at contractor's own arrangements without any extra cost to the Govt and clean the site complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for preparation of new surface on wall applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed.

M&L preparation of new plastered surface of walls and applying two coat of cement based paint over cement primer complete.

S & F in repair for Fibre glass 2 mm Thick reinforced translucent corrugated sheeting with two corrugations/plain side lap fixed with coach screw and washer in roof, wall etc any colour . complete all as specified and directed.

Taking down old plaster/loose concrete work on brick/concrete face of chazza/facia/column/beam/RCC parapet railing etc and providing 15mm to 25mm thick polymerized cement ready mix plaster of compressive strength 20.45 Mpa(28 days) of ORGANO technologies Pvt Ltd material on brick wall/concrete face of chazza/facia/column/beam etc finished even and smooth including necessary form work and scaffolding upto four storey of bldg complete all as speicified.

S&F in repair Health faucet (brass) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed.

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and directed.

M&L for Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,ength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding, dismantling of existing stone slabsetc complete all as directed.

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc 500 & 1000ltrs capacity and date of cleaning to be written on the tank by mechenical means complete all as specified and directed.

S&F in repair Float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair Float ball valve 25mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

M & L Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6mm complete all as specified.and directed.

suniltraders

M/s Chandra Mohan and Sons

QUALITY CONSTRUCTIONS CO

Bidder Name

M/S Reliance Construction