Andaman Nicobar

Active

Works

Civil Works - Others

Repair and Renovation of Special Ward in BJR Hospital, Perka at Car Nicobar.

Chief Engineer Andaman Public Works Department (APWD)

At Perka Car Nicobar | Nicobars, Andaman And Nicobar Islands

Amount: ₹59.8 LCloses: 22 Sept 2026Due tomorrow

Timeline

Published15 Sept 2026
Closes22 Sept 2026
Bid Opening22 Sept 2026

Tender Value

₹59.8 L

EMD Value

₹1.2 L

Closing Date

22 Sept 2026, 3:00 pmDue tomorrow

Tender Inviting Organisation

Name

EE,CD,APWD,CAR NICOBAR

Address

Office of the Executive Engineer Construction Division APWD Car Nicobar

Work Description

Repair and Renovation of Special Ward in BJR Hospital, Perka at Car Nicobar.

Tender Information

Tender ID

2026_APWD_24682_1

Reference Number

e-tender-DB/CD/CN/2026-27/2254

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

240 days

Location

At Perka Car Nicobar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredScan EMD,Work experience certificate,Affidavit 1.2.1,Indian Non Judicial Bond Stamp paper,GST (.pdf)

RequiredScan 10 Yrs Financial Statement,Form C 3,Undertaking 1.2.2 (.pdf)

RequiredThe Pan Card should be in the name of the firm participating. (.pdf)

Finance

RequiredPricebid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1.2 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 Sept 2026

Published

15 Sept 2026

Bid Opening

22 Sept 2026

Download Starts

15 Sept 2026

Download Ends

22 Sept 2026

Submission Starts

16 Sept 2026

Clarification Period

16 Sept 2026 - 17 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (70 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
1.1	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)	5	cum	27,145.25	₹1,35,726.25
2	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).	10	cum	27,979.9	₹2,79,799
3Centering and shuttering including strutting, propping etc. and removal of form for
3.1	Lintels, beams, plinth beams, girders, bressumers and cantilevers	218	sqm	904	₹1,97,072
3.2	Columns, Pillars, Piers, Abutments, Posts and Struts	71	sqm	1,196.35	₹84,940.85
4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
4.1	Thermo-Mechanically Treated bars of grade Fe-500D or more.	3,103	kg	149.15	₹4,62,812.45
5	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	264	sqm	2,331.35	₹6,15,476.4
6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.84 MB

Work Item Documents

TenderDocumentBJRSW.pdf

Tender Documents • 1.39 MB

BOQ_26128.xls

BOQ • 0.41 MB

Instructions-to-bidders.pdf

Additional Documents • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
1.1	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)	5	cum	27,145.25	₹1,35,726.25
2	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).	10	cum	27,979.9	₹2,79,799
3Centering and shuttering including strutting, propping etc. and removal of form for
3.1	Lintels, beams, plinth beams, girders, bressumers and cantilevers	218	sqm	904	₹1,97,072
3.2	Columns, Pillars, Piers, Abutments, Posts and Struts	71	sqm	1,196.35	₹84,940.85
4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
4.1	Thermo-Mechanically Treated bars of grade Fe-500D or more.	3,103	kg	149.15	₹4,62,812.45
5	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	264	sqm	2,331.35	₹6,15,476.4
6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:

1.1

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

cum

27,145.25

₹1,35,726.25

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

cum

27,979.9

₹2,79,799

3Centering and shuttering including strutting, propping etc. and removal of form for

3.1

Lintels, beams, plinth beams, girders, bressumers and cantilevers

218

sqm

904

₹1,97,072

3.2

Columns, Pillars, Piers, Abutments, Posts and Struts

sqm

1,196.35

₹84,940.85

4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

4.1

Thermo-Mechanically Treated bars of grade Fe-500D or more.

3,103

149.15

₹4,62,812.45

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

264

sqm

2,331.35

₹6,15,476.4

6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :