Composite tender for Design_Construction of 48000 lac Glns SR, Construction of Pump House_Operators Room, Sluice chambers, RCC Jacketing to 35000 lac and 20000lac Glns SRs, Chowkidar Quarter and providing laying fitting of required pipe network

Amount

Earthwork in excavation by manual means in trenches for foundations, drains, pipes cables etc. (Not exceeding 1.5m in width) and for shafts, wells cesspits and the like, not exceeding 10sqm on plan, depth upto 1.5m incl. disposal of excavated earth upto 1mtr. from cutting edge disposed earth is to be leveled and neatly dressed

a) All sorts of soil

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in dept, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth to be leveled & dressed neatly withh all leads , lifts & dewatering complete (bulk excavation)

Providing of Laying of dry stone soling incl, rraming dressing etc

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement cons. Work in beams, suspended floors, roofs, slope up to 15O landings, balconies, shelves, Chajjas, lintels, bands, plain window sills, stair cases and spiral starir cases, upto floor five level excl. The cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, valults, shells, folded plate and roofs having slope more than 15 upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1:5:3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20mm nominal size) CRushed

Reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete, Thermo-Mechanically treated bars.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms

Beams

Domes

Extra for shuttering in Circular work 20% of basic respective centering and shuttering items.

Foundation

Walls

Beams

Extra for arches, domes, valuts exceeding 6Mtrs

Steel work welded in built up sections/framed work incl, cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required (in gratings, frames, Guard Bar, Ladders, railing, Brackets, Gates & similar works.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in cement mortar 1 :6 (1 cement:6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar (1:3)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Dry Random rubble masonry with Hard stone in foundation and plinth, using quarry stone with bond stone.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately 2nd class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Extra for providing and mixing water proofing material in cement concrete work on doses by weight of cement as per manufacturer’s specification.

Providing and incorporating PGI Sheet strip, 0.63mm thick, 200mm wide at construction joints for providing water seal.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: (Light) 15 mm dia. nominal bore

Providing & fixing 15mm nominal bore CP brass bib cock of approved make & brand complete in all respects

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 (15mm nominal bore)

Providing and fixing C.P. brass angle value for basin maxier & geaser points of approved make conforming to IS : 8931 (15mm nominal bore)

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

P/F of Water Geyser of 50 Ltr capacity along with all fixtures complete of approved make

Providing andd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gram/m2

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.

Providing and fixing ball bearing for rolling shutters.

Providing and fixing plained eaves boarding. 300x40 mm (nominal size)

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 4 70x420mm bowl depth 178mm

Providing and fixing ball valve (brass) of approved quality complete 20 mm nominal bore

Making Connection of GI Distribution branch with Gi main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc complete.

a)50 to 80mm nominal bore

b)25 to 40mm nominal bore

Providing & fixing Gi Union in GI Pipes incl, cutting of pipe & threading the pipe & making long screws etc complete.

80mm dia Gi Union

65mm dia Gi Union

50mm dia Gi Union

40mm dia Gi Union

25mm dia GI Union

20mm dia GI Union

15mm dia GI Union

Providing & fixing of various pipe specials of reputed make, as per requirement of site & directions of Engineer In-Charge

100mm dia Gate valve

80mm dia Gun valve

65mm dia Gun valve

50mm dia Gate valve

40mm dia Gate valve

Providing hoisting and fixing trusses/purlins rafters/spots/post-plates or like components including cost of screws etc complete(First class popular wood)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing & fixing PVC prince pipe along with all PVC bends, Tees, S&P traps fittings, vent cowl incl, earth work excavation refilling etc complete job

100mm dia

75mm dia

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade with necessary screws etc complete.

Tower Bolts100x10mm

Tower Bolts150x10mm

Sliding bolts 250x16mm

Handles 125mm

Handles 100mm dia Alaminium

P/F electrical points Heating & Lightining incl cost of wire switches necessary MCB's switch board seiling rose of recputal make ISI marked screws casing conducts & other material of all sorts carriage labour charges complete job Electrical points

Lightining

Heating

Providing & fixing of 65mm dia Gi Bends for aeration incl, all carriages complete Job.

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

150mm dia Ductile Iron Class K - 9 Pipes

100mm dia Ductile Iron Class K - 7 Pipes

80mm dia Ductile Iron Class K - 7 Pipes

Providing Push on joints to Centrifugally (Spum) Cast iron pipes or Ductile iron pipes including testing of joints and including the cost of rubber gasket.(100mm dia pipes)

150mm dia pipes

100mm dia pipes

80mm dia pipes

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) light

65mm dia

50mm dia

40mm dia

25mm dia

20mm dia

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. incl, tail pieces as per requirement of site & directions of Engineer In-Charge.

150mm dia

100mm dia

80mm dia

Providing & fixing PVC fittings

100mm dia Junction

100mm dia Collar

100mm dia Bends

100mm dia Tee

75mm dia Junction

75mm dia Collar

75mm dia bend

75mm dia Tee

Carriage of materials from source upto nearest dumping site incl, loading, unloading and stacking 100Kms (subject to actual)

Soling by an avg lead of 10Kms

Sand by an avg lead of 30Kms+aggregate 20mm size

Coarse aggregate avg lead for 30Kms 40mm size

Cement/steel for 10Kms

150 DI pipes by an avg leada for 105Kms

100 DI pipes by an avg leada for 105Kms

below 100mm dia avg lead for 105Kms

Bricks for 120kms

Carriage of materials by Manual Labours from Dumping Site Upto working site incl, loading, unloading and stacking for 600Mtrs

Soling

Sand /aggregate 20mm size

Coarse aggregate 40mm size

Cement/steel

GI pipes

DI pipes 150mm dia

Gi/Di pipe 100mm dia

Bricks

Part B) Mechanical /Electrical Components

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

As per Annexure B

Part C) Creation of 100KVA Electric Sub-Station incl, transportation, store, Material handling T&P erection, testing, commissioning & other Sur-charges complete

100KVA Transformer

ST poles 9Mtr long

ST poles 8m Long

0.05ACSR conductor

GI Channel X-Cross incl clamps & Braces

Gi Channel/Angle/flat of sizes incl, clamps for Sub-Station

11 KV Pin insulators with pins complete

9KV lightening Arrestor Station Type

11KV G.O fuse set 3phase 3 pole 400A

11 KV D.O fuse set 3 phase 400A

LT Fuse set

PVC cable 185Sqm

LT Shackle insulators with clamps

Galvanized Nuts & bolts

Earthing of poles complete

11KV Disc insulators

Earthing of Sub-Stn Pipe earthing

Painting of poles

Cement Bottomming of poles

Sundary items like Aluminum ligs, Jumpers, binding tape

Installation of 11KV Tri Vector Meter

M/S NISAR ASSOCIATES

M/S AMAN AND CO