Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.9 L+₹2.1 L (7.10%)Rejected-Finance 901 GH 83 SECTOR 20 PANCHKULA 134116 | PANCHKULA | HARYANA | 134116 | L2 | Rejected-Finance Being L2 |
Tender Value
₹32.6 L
EMD Value
₹65,200
Closing Date
30 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PATIALA
HQ COMMANDER WORKS ENGINEERS BLDG No 26 NEW LALBAGH PATIALA147001
ADDN ALT TO BLDG NO NO P75 AT 33 FAD DAPPAR
2023_MES_583156_1
CWE/PAT/T-57/2022-23
Open Tender
Civil Works
Works
180 days
DAPPAR
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
AGE(I) DAPPAR
₹65,200
13 Apr 2023
27 Feb 2023
1 Apr 2023
27 Feb 2023
30 Mar 2023
12 Mar 2023
27 Feb 2023 - 11 Mar 2023
Amount
Taking down chowkhats or frames (without taking off shutters from the frame) n.exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.
Cutting chases, pinning in .making good to facings in brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting notexc 10 cm girth complete all as specified and directed by Engr-in-Charge
Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed by Engr-in-Charge.
Excavation in trenches in soft/loose soil not exceeding 1.5m depth and n.exc 1.5m width for foundation etc and getting out all as specified.
M&L for PCC in foundation fillling and masss concrete 1:4:8 type D2(40mm graded aggregate) all as specified and as directed.
M&L for RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, as specified and directed by Engr-in-Charge.
M&L for RCC M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span as specified and directed by Engr-in-Charge.
M&L for RCC M-25 in Columns, pillars, piers,posts and struts as specified and directed by Engr-in-Charge.
M&L for RCC M-25 in Chajjas as specified and directed by Engr-in-Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to flat.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc
Formwork to sides and soffits offloor or roof beams, beam haunchings,girders, bressummers, lintels,cantilevers, shelves including supports, overhangs, etc. also bressummers, lintels, cantilevers, shelves including supports, overhanges etc. also splays between floors and beams, etc.
Formwork to sides of pillars, posts, struts, piers, columns and stachions.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirallv for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete.
S&F Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking bending spirallv for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete.
M&L Brick work with sub class 'B' burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge
M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement including fixing of chicken wire gauge where directed complete all as specified and directed. Note: WPC will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified and directed.
M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work for concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceillings/soffits (thickness vary from 2 to 3 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directe. Notes : (i) The prepared surfaces after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note the that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in- Charge through site order.
Applying 02 coats of exterior emulsion paint (light shade) @ 1.43 Ltr/10 Sqm by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 2.20 kg/10 Sqm as recommended for under coat by manufacturer of exterior emulsion by using emulsion and primer complete all as specified and directed.
Preparation of new plastered surface of walls and applying two coats of distemper oil emulsion including primer as specified by the manufacturer complete all as specified and as directed.
Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60x44.45x1.29 mm and shutters made of 63.5x31.75x1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in fornt shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt 150mm long-2 nos er leaf. (b) Powder Coated Aluminium Tower Bolt 150 mm -2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Make (Aluminium Sections) :
Dismatling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
S&F false ceiling of 12.5 mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AGE(I) and including supply and fixing of items all as specified as below:- manufacturer only all as specified and directed. (b) S&F suspended Plain Ceiling includes Perimeter Channel (Material-GI(IS513), YS 260Mpa, Finish-Galvanished 150GSM(IS27) is fixed along with perimeter of existing wall/partition with the help of HILTIHPS-1 (6x40) impact anchor, at 600mm centres. (c) S&F Ceiling Angle (Material-GI(IS513), YS-260Mpa, Finish-Galvanished 150GSM(IS277) is suspened by fixing it to the Gyproc_ soffit cleat (GI (IS513) YS-260Mpa, Finish-Galvanished 150GSM(IS277). Soft Cleat and Gyproc-- Rawl Plug-08x45mm (Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load-6.8kN for M30 concrete grade) creating 1220mm x 1220mm grid. (d) S&F Intermediate channel (Material-GI(IS513), YS-260Mpa, Finish-Galvanished 150GSM(IS277) is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement (Material-As per EN 10083 Finish- Zinc Plating) or with 2 Nos of 04.2x13 Gyproc metal to metal screw (Material-Carbon steel EN-ISO 7049/50 Finish. Zinc Coating Thickness- 4.14micron.) (e) S&F Ceiling Section (Material -GI(IS513),YS-260Mpa, Finish-Galvanished 150GSM (IS277) is then fixed to the Intermediate Channel (Material-GI (IS513), YS-260Mpa, Finish-Galvanished 150 GSM (IS277) with the help of Connecting Clip (Material-High carbon spring steel wire (BS 970Gr.En42)-46-48 HRC, Finish-Zinc plating 4-6 micron) and in direction perpendicular to the intermediate channel at 457 mm c/c. (f) S&F Single layer of 12.5mm tapered edge plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws (Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating) at 230mm centres on ceiling section & 150mm at periphery of ceiling. (g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape.
Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10 mm thick rendering in cement mortar (1:4) over 50mm thick PCC 1:2:4 type B2, using 40 mm graded stone aggregate and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.
M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding, levellilng course, including providing neat cement slurry @ 3 kg/Sqm including preparing slab surface with wire brushing complete and finsihing top surface of PCC rough & even to receive the bedding layer including necessary formwork complete all specified and directed by Engr-in- Charge.
S&F Pre-Painted galvalume aluminum Zinc coating GI based corrugated steel sheet of managlore pattern tile Profile having TCT 0.45mm thick, rib height 28mm, Min. G550 Mpa Grade, pitch 200mm with 16 mm step depth, of colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteners/screws as recommended byt manufacturer complete all as specified and directed by Engr-in-Charge.
S&F steel work in tubular trussses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 Fe-410-W (Gde-E-250) Quality A Complete all specific and directed by Engr-in-Charge.
M&L for applying two coats of synthetic enamel paint over a coat of primer on steel surfaces of any description, over 10 cm in width or girth, not otherwise described.
M&LP Providing precast cement concrete louvres and jallies, 25mm thick solid), including all mouldings set in cement mortar 1:4 Type B0 1;2:4 (12.5 mm graded aggregate) including two coats of painting over complete all as specified.
75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/hard standing and plinth protection.
M&L 40 mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in 15mm thick cement mortar (1:3) complete all as specified.
M&L for providing 40 mm Damp proof course to horizontal or vertical surface including necessary formwork in type B0 1:2:4 using 12.5mm graded stone aggregate complete all as specified and as directed.
M&L for treating the top surface of filled earth at the rate of 5 lites of emulsion square metre of surface of floor complete all as specified and as directed.
M&L for treating the soil under plinth at the rate of 5 litres of emulsion per square metre of surface of floor complete all as specified and as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to the measured) complete all as specified and as directed.
S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5x38.10x1.29 mm for chowkats or frame & shutters made of size 44.45x 44.45x 1.29 mm for side rails and middle rail, 114.3x44.45x1.29mm for top rails and bottom rails and including 12mm thick high density fibre board pre-laminated on both side (water proof) below middle/lock rail and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20 mm size with and complete all as specified and direcrted including supply and fixing the following items:- Make (Aluminium Sections): Jindal/Valco/Galco/Hindalco or equivalent as approved.
M&L applying 02 coats of interior emulsion paint (light shade) @ 10 sqm/litre/2 coats by using roller/brush to old wall surfaces, over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulusion and primer complete removal of existing treatment complete all as specifie and directed. Make of Interior Wall Primer : Asian/Berger/Nerolac/(Best Quality). Make of Interior Emulsion : Asian (TRACTOR) /Berger (BISON) /Nerolac (BEAUTY SMOOTH)
M&L applying 02 coats of exterior emulsion paint (light shade) @ 5 sqm/litre/2coats by using roller/brush to old external wall surfaces wall /RCC surfaces /soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall putty thickness vary from 1 to 1.5 over & including a coat of exterior wall primer @ 11 sqm/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion existing treatment ocomplete all as specified and directed. Make of Exterior Wall Primer : Asian/Berger/Nerolac (Best Quality). Make of Exterior Emulsion : Asain (ACE)/ Berger (WALMASTA)/ Nerolac (SURAKSHA SUPERIOR)
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.
M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked of not less than 20 mm dia, thickness 1.8 mm, concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes, etc. suitable for mounting modular switches, sockets etc and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.
(a) One light / fan / Bell point controlled by one switch
(b) One 5 pin socket outlet independent 5 Amps
(c) One socket outlet 5 Amps on the same board with other switches.
(d) One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 2.5 sqmm copper cables as earth wire (One 15A socket operate in one circuit)
M&L Sub main wiring with 3 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable size of cable 3x10 sqmm (line conductor) & 1x10 sq mm (earth conductor). 1100 V grade drawing in & includingheavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
All as per above item 51 with single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x2.5sqmm and 1 x 2.5 sqmm as earth wire.
All as per above item 51 with single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x4sqmm and 1 x 4 sqmm as earth wire.
S&F Modular switch 1 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge.
S&F Modular socket 6Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.
S&F Modular socket 6/16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.
S&F Modular switch 16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.
S&F White cover plate with frame 3 module 240 volts complete all as specified and directed by the Engr-in-charge.
S&F White cover plate with frame 4 module 240 volts and complete all as specified and directed by the Engr-in-charge.
S&F White cover plate with frame 6 module 240 volts and complete all as specified and directed by the Engr-in-charge.
S&F White cover plate with frame 8 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.
S&F White cover plate with frame 12 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.
S&F Modular Metal Box 3 module and complete all as specified and directed by the Engr-in-charge.
S&F Modular Metal Box 4 module and complete all as specified and directed by the Engr-in-charge.
S&F Modular Metal Box 6 module and complete all as specified and directed by the Engr-in-charge.
S&F Modular Metal Box 8 module and complete all as specified and directed by the Engr-in-charge.
S&F Modular Metal Box 12 module and complete all as specified and directed by the Engr-in-charge.
S&F wall mounted fan (White) 300 mm sweep, 1350 RPM,230V complete all as specified and directed by engr-in-charge
Supply & Fix Decorative wall light fixture made up of polycarbonate for 15 W and making good disturbed surface of wall to match the existing surface, complete all as specified and directed by Engr-in-charge. Cat Part No LHDL03160069 of Havells or equivalent
Supply & Fix LED slim fit low profile ceiling downlights 24W and making good disturbed surface of area to match the existing surface, complete all as specified and directed by Engr-in-charge.
Supply and fixing ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-charge.
S&F Sheet metal enclosure MCCB TPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 415V, 8 way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB SP 6 -32 Amps,10 KA, 'C' series 240 V ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB SP 32-63 Amps,10 KA, 'C' series 240 V ISI marked complete all as specified and directed by Engr-in-charge.
S&F for flush fixing of Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 12 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
M& L Earthing complete by using GI Strip of 32x6mm as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron strip of 32x6 mm by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and directed by Engr-in-charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including service wire of size 2.5 sqmm 3 core copper from ceiling rose to security light NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.
Supply & Fix only Rigid non meatalic PVC conduit heavy duty 25mm dia ISI marked with all accessories and fittings on surface of wall, ceiling and making good disturbed surface of wall to match the existing surface, complete all as specified and directed by Engr-in-charge.
Supply and fix 15A Modular Socket MCB AC Box including 20A SPN, HPL Cat Part No ELMOACBM4M or equivelant in Anchor/ Schneider/legrand complete all as specified and as directed by Engr-in-Charge
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core
M&L sand cushioning (drysand) to under ground cable for cable protection provided with layers 8cm deep before laying and 15 cm after laying the cable complete all as specified and directed. Note :- Punned thickness will be measured only.
M&L for precast concrete cable cover class LV type 1, flat, size 300mmx 180mm x 40mm laid dry in trenches for cable protection complete all as specified and as directed.
Supply and fixing 40 mm dia 'light grade', galvanised pipe with all fitting; laid in trenches/ passing through roads alongwith cutting and making surface good with existing surface all as directed by Engr-in-charge.
M&L for supplying, installing, testing and commissioning of 415Volts 3Phase 4 Wire factory fabricated and tested all as per existing IEC 60439 Part 1, floor mounted, IP 55 grade, Outdoor double door Type Bus Coupler LT cubical panel made out of CRCA MS sheet 3mm thick duly powder coated with Seimens grey shade RAL 7032, dust and veremin proof with suitable size TPN PVC sleeved aluminium bus bar incld. angle iron base frame of suitable size. Panel should be mounted/grouted on 150 mm thick PCC (1:4:8) type D2 below nearest ground level and should be with 400 mm offsets on all 04 sides of the panel complete and should be inclusive of following fitted in accessories :-
A. INCOMING (i) MCCB 250 Amps ,415 V 4 pole 36 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per Make : L&T Cat part No : CM98065OONO including spreader terminals - set of 04 and direct rotary handle - 01No as per OEM specifications and model or equivalent in - 01 No.
B. OUTGOING (i) MCCB 160 Amps ,415 V 4 pole 25 KA 50 Hz with Ics =100% Icu & thermal magnetic adjustable type all as per Make L&T Cat part No : CM98065OOPO as per OEM specifications and model or equivalent -02 Nos (ii) 02 (Two) No of spare cubicles for incorporating 3 Phase Pre-paid Meters size of LxB = 500x 500 mm (iii) LED indicators - R/Y/B 240 V AC - 03 Nos per Incoming and outgoing feeders. (iii) Multifunction meter with accuracy Class 1.0, Flush mounting 96 x 96 mm, CT/PT site programmable for measurement of V, A, PF, kW, kVA, Load hours all as per Make L&T Cat Part No. - WL440010OOOO and including suitable size CTs (set of 3) - 01 No. (01 NO. for Incoming feeder) (iv) Single function 3 phase LED ammeter with accuracy Class 1.0, Flush mounting 96 x 96 mm, Input voltage measurement range 50-520 VAC (P-P), CT/PT site programmable all as per Make L&T Cat Part No. - WL131010OOOO and including suitable size CTs (set of 3) - 2 Nos. (v) MCB SP 'C' series 10kA 60-32 Amps as protection for LED lamps (01 No. each for set of 03 Nos. LED lamps, multifunction and single function meters) and multifunction meter - 3 Nos. (vi) Control wiring with suitable size PVC insulated single core copper conductor cable for LED lamps, MFMs, etc.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers all as specified and directed by Engr-in-Charge.
HARISH SALES CORPORATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .