R.I. Office Bhikaripalli_building

Removing old lime or cement plaster from walls including racking out joints 12mm deep (1/2) and removing the debriswithin 50m lead including cost of all labour with T & P, Cess required for the work as per direction of Engineer-in-Charge.

16mm (5/8) thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge.

Providing fitting,fixing of AI.door with OEL anodized AI.door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 includingcost of all labour T&P,Cess hire charges of drilling machineetc complete as per direction of Engineer-in-Charge.

Painting two coats with any approved paint to Iron/wood work over a coat of oil bound primer including cost of paint & primer sand papering polishing the surface with cost conveyance andof all materials and labour with T&P required for the work with Cess etc complete as per the direction of the Engineer-in-Charge

Distempering two coats over a coat of oil bound primer to the wall surface with any approved shade including cost of distemper and primer with conveyance Royalty, DMF, EMF & Additional Charges andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge.

Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Earth work in all kinds of soil in excavation of foundation all leads and lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 (1-0) in depth with all labour, Cess and T&P etc. complete in all respect as per specification and direction of Engineer-In-Charge

Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, Royalty, DMF, EMF & Additional Charges , of all materials and cost of alllabour & T&P as required for the item of work including Cess etc complete as per specification & direction ofEngineer-in-charge.

Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance Royalty, DMF, EMF & Additional Charges , labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge

Random rubble hard granite stone masonry grouted with sand in foundation and plinth with hard black broken granite stone metal of approved quality and from approved quarry including splays cutting circular moulding,well watered and rammedincluding cost and conveyance of all materials with alland Royalty, DMF, EMF & Additional Charges and labour with T&P required for the work complete as per the direction of Engineer-In-Charge.