Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.9 LAccepted-AOC COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹95.6 L+₹12.8 L (15.4%)Rejected-Finance BORBHETA JAIL ROAD NEW CHRISTIAN PATTY JAIL ROAD JORHAT ASSAM 785001 | JORHAT | ASSAM | 785001 | L2 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 3 | L3₹1.0 Cr+₹19.0 L (22.9%)Rejected-Finance A T ROAD CHABUA DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L3 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 4 | L4₹1.0 Cr+₹21.4 L (25.9%)Rejected-Finance A T ROAD CHABUA NEAR ST LUKAS HOSPITAL PO CHABUA DIST DIBRUGARH ASSAM 786 184 | CHABUA | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER | |
| 5 | L5₹1.1 Cr+₹22.2 L (26.7%)Rejected-Finance VILLAGE GOROIMARI PO HALESWAR TEZPUR 784104 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784104 | L5 | Rejected-Finance REJECTED NOT BEING THE LOWEST TENDERER |
| Sl No | Description | Qty | Unit | kabitaconstruction L3 | M/S Dee Dee Singhania & Sons L7 | ANIL RAI AND COMPANY L2 | M/s Sashi Enterprise L4 | M/s Pramillabh Construction L6 | Singhs Construction L5 | M/s PRABIR ENTERPRISE L1 | M/S Kangkans L9 | M/S SHIVAYA ENGINEERING L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 35/40 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :-
Note : Spare parts to be measured and paid and separately under Item No. 1.01 to 1.29 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion. | 3 | EACH JOB | 60,000 ₹1,80,000 | 37,000 ₹1,11,000 | 30,000 ₹90,000 Lowest | 36,500 ₹1,09,500 | 38,750 ₹1,16,250 | 35,800 ₹1,07,400 | 30,000 ₹90,000 Lowest | 35,000 ₹1,05,000 | 36,996 ₹1,10,988 |
| 1.01 | Supply only Kit cylinder Liner complete all as specified and as directed | 12 | EACH | 3,600 ₹43,200 | 3,500 ₹42,000 | 4,050 ₹48,600 | 3,650 ₹43,800 | 2,900 ₹34,800 Lowest | 3,450 ₹41,400 | 3,000 ₹36,000 | 3,600 ₹43,200 | 4,100 ₹49,200 |
| 1.02 | Supply only Liner o ring (as per existing make or as approved by GE) | 12 | EACH | 100 ₹1,200 Lowest | 200 ₹2,400 | 280 ₹3,360 | 250 ₹3,000 | 220 ₹2,640 | 250 ₹3,000 | 180 ₹2,160 | 100 ₹1,200 Lowest | 199 ₹2,388 |
| 1.03 | Supply only Piston | 12 | EACH | 3,000 ₹36,000 | 3,500 ₹42,000 | 4,500 ₹54,000 | 3,400 ₹40,800 | 2,900 ₹34,800 Lowest | 3,350 ₹40,200 | 3,000 ₹36,000 | 3,600 ₹43,200 | 3,499 ₹41,988 |
| 1.04 | Supply only Piston ring | 12 | EACH | 1,200 ₹14,400 | 1,200 ₹14,400 | 2,200 ₹26,400 | 1,000 ₹12,000 Lowest | 1,450 ₹17,400 | 1,350 ₹16,200 | 1,650 ₹19,800 | 1,200 ₹14,400 | 1,099 ₹13,188 |
| 1.05 | Supply only C.R.bearing | 12 | EACH | 800 ₹9,600 | 1,000 ₹12,000 | 1,800 ₹21,600 | 1,100 ₹13,200 | 1,250 ₹15,000 | 850 ₹10,200 | 850 ₹10,200 | 800 ₹9,600 | 699 ₹8,388 Lowest |
| 1.06 | Supply only Complet gasket of DG Set | 3 | EACH JOB | 3,600 ₹10,800 | 4,000 ₹12,000 | 4,500 ₹13,500 | 4,300 ₹12,900 | 4,570 ₹13,710 | 3,600 ₹10,800 | 2,200 ₹6,600 Lowest | 3,600 ₹10,800 | 3,769 ₹11,307 |
| 1.07 | Supply only Complete fan belt of Dg Set | 3 | EACH JOB | 1,600 ₹4,800 | 1,500 ₹4,500 | 2,480 ₹7,440 | 1,300 ₹3,900 Lowest | 2,650 ₹7,950 | 2,000 ₹6,000 | 1,400 ₹4,200 | 1,600 ₹4,800 | 1,699 ₹5,097 |
| 1.08 | Supply only Valve | 12 | EACH | 400 ₹4,800 Lowest | 1,000 ₹12,000 | 980 ₹11,760 | 950 ₹11,400 | 950 ₹11,400 | 900 ₹10,800 | 1,200 ₹14,400 | 900 ₹10,800 | 1,099 ₹13,188 |
| 1.09 | Supply only Valve Guide | 24 | EACH | 150 ₹3,600 | 300 ₹7,200 | 750 ₹18,000 | 2,501 ₹60,024 | 360 ₹8,640 | 280 ₹6,720 | 120 ₹2,880 Lowest | 200 ₹4,800 | 189 ₹4,536 |
Tender Value
₹97 L
EMD Value
₹1.7 L
Closing Date
11 Jul 2025, 6:00 pmClosed
CWE (AF) JORHAT
HQ CWE (AF) JORHAT ROWRIAH 785004
84150/E8 SPECIAL REPAIRS TO DG SETS AT VARIOUS LOCATIONS OF AF STN CAHBAU AND ALG PSAIGHAT UNDER GE(AF) CAHBAU
2025_MES_714466_1
84150/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE(AF) CAHBAU
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
Yes
GE (AF) CAHBUA
₹1.7 L
Yes
8 Sept 2025
14 Jun 2025
12 Jul 2025
14 Jun 2025
11 Jul 2025
6 Jul 2025
Amount
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 35/40 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 1.01 to 1.29 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner complete all as specified and as directed
Supply only Liner o ring (as per existing make or as approved by GE)
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Water Pump Assembly
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only ollet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Note for item No. 1.01 to 1.29: the Make of the spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 62.5 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 2.01 to 2.30 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Water Pump Assembly
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Supply only Complete canopy suitable for 62.5 kVA DG Set with heavy duty base frame grouting with RCC foundation
Note for item No. 2.01 to 2.30: The Make of the Spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 125 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 3.01 to 3.29here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Water Separater
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Note for item No. 3.01 to 3.29: The Make of the Spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 160 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 4.01 to 4.29 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Water Pump Assembly
Supply only Piston cooling nozzle
Supply only Bellow flexible as per existing size
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Note for item No. 4.01 to 4.29: The Make of the Spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 200 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 5.01 to 5.29 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Water Pump Assembly
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Note for item No. 5.01 to 5.29: The Make of the Spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 250 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 6.01 to 6.29 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Kit Turbo charging
Supply only Water Pump Assembly
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Gear assembly
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Note for item No. 6.01 to 6.29: The Make of the Spare parts shall be as per existing make or as approved by GE.
M&L for checking/Inspection/Maintenance and servicing complete including replacement of unserviceable spare parts of the DG Set( comparising of Engine/Alternator/Control panel) of the 320 KVA DG Set for smooth functioning as per OEM instructions and or all as directed by Engr-in-Charge Checking (a) Checking & replacement of lubricating oil,(b) Repair & Replacement of all the nut,bolts of engine and alternator(c) Replacement of all belts and adjust the tension properly(d) and dismantling the cylinder head and assembly from DG Set , including overhauling of Engine and head shifting to authorised workshop for head & valve polishing and back for carrying out following repair and replacement of spares as mentioned below :- Note : Spare parts to be measured and paid and separately under Item No. 7.01 to 7.26 here-in-after with Defects Liability Period for 12 MONTHS from the Certified Date of Completion.
Supply only Kit cylinder Liner
Supply only Liner o ring
Supply only Piston
Supply only Piston ring
Supply only C.R.bearing
Supply only Complet gasket of DG Set
Supply only Complete fan belt of Dg Set
Supply only Valve
Supply only Valve Guide
Supply only Valve seat inlet
Supply only Valve seat exhaust
Supply only valve seal
Supply only Piston cooling nozzle
Supply only Piston connecting rod
Supply only Governor pressure valve (hydraulic Governor)
Supply only Collet valve
Supply only Spring valve
Supply only Collar thrust
Supply only Kit injector
Supply only Barrel sleeve
Supply only Engine Oil
Supply only Coolent
Supply only Air Filter
Supply only Fuel Filter
Supply only Lub Oil Filter
Supply only Engine mounting vibrating pad
Note for item No. 7.01 to 7.26 : The Make of the Spare parts shall be as per existing make or as approved by GE.
Taking down of radiator assembly carefully from 35/40 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 62.5 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 125 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 160 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 200 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 250 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Taking down of radiator assembly carefully from 320 KVA DG Set Engine for De-scaling and transporting to civil workshop and removing the sediments,scales and rust etc. by means of chemical cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding/soldering with suitable material, and Re-assembling the same with new gaskets including replacement of Radiator Cap (whereever required) and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site by Engineer-in-Charge.
Dismantling the defective FIP from the 35/40 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 62.5 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 125 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 160 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 200 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 250 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
Dismantling the defective FIP from the 320 KVA DG Set , transporting to civil workshop and Material and labour for repair/calibration of FIP , nozzle repair with pressure check including replacement of barrel plunger,Nozzels,element,dilevery valve, Injector,cups,'O' rings etc. as per site requirement , testing and transporting to site from workshop and Re-assembling the same in position at site and testing for satisfactory performance complete all as specified and directecd at site complete all as specified and directed at site.
M&L for Painting of 35 /40 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 62.5 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 125 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 160 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 200 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 250 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
M&L for Painting of 320 KVA DG set of any make with Alternator, base plate by using heat resistant paint with spray gun over existing surface as per existing colour code including taking out old paint ,dirt and dust from the DG set body, Alternator and Engine complete all as specified and directed by Engr-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 35/40 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 62.5 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 125 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 160 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 200 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 250 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fix in repairs DG Set Control Panel Consiting of ignition switch,water temperature gauge,VAF meter,push button,indication lamp etc. suitable for DG set of capacity up to 320 KVA complete all as specified and directec at site by Engineer-in-Charge.
Supply and fixing in repairs Battery with initially charged of Capacity 90/100 AH, 12 volt complete all as specified and directed.
Supply and fixing in repairs of Battery with initially charged of Capacity 150 AH, 12 volt complete all as specified and directed.
Supply and fixing in repairs of Battery with initially charged of Capacity 180 AH, 12 volt complete all as specified and directed at site.
Dismantling of Self Starter Motor 12 Volt from DG set of Cap 62.5/70 KVA and shifting to workshop and back for caryyingout the repairs like replacement of Burn Copper Winding and Spare parts such as armature, housing bush, solenoid switch, pinion, pinion lock, rocker, rocker cap bush, frog, frog adjustment bolt, field coil, carbon brush, armature shaft/commutator shaft ,adjusting bolt, centre plate bush, commutator fiber/steel washer etc. complete all as specifi edna sas directed by Engineer-in-Charge.
Dismantling of Self Starter Motor 24 Volt from DG set of Cap 125 to 320 KVA and shifting to workshop and back for caryyingout the repairs like replacement of Burn Copper Winding and Spare parts such as armature, housing bush, solenoid switch, pinion, pinion lock, rocker, rocker cap bush, frog, frog adjustment bolt, field coil, carbon brush, armature shaft/commutator shaft ,adjusting bolt, centre plate bush, commutator fiber/steel washer etc. complete all as specifi edna sas directed by Engineer-in-Charge.
M & L for repair of Battery Charging Alternator Heavy duty 12 Volt with Super Enamelled/ Paper Coated Copper wire of existing gauge incluiding all connected insulating material such as separator etc. varnishing, replacement of carbon bushes including disconnection/dismantling of electrical connections, foundation bolts, pulling out, re-insulation of burntout winding , rewinding work and re-assembling and testing complete all as directed.
M & L for repair of Battery Charging Alternator Heavy duty 24 volt with Super Enamelled/ Paper Coated Copper wire of existing gauge including all connected insulating material such as separator etc, varnishing, replacement of carbon bushes including disconnection/dismantling of electrical connections, foundation bolts, pulling out and reinsulation of burnt out winding, rewinding work and re-assembling and testing complete all as specified and as directed.
S & F in repair Doors of 35/40 kVA DG Set including welding of defective portion and provision of fixing of new MS hinges/MS sheet of suitable size including replacement of all doors acoustic foam complete all as directed by Engr-in -charge.
S & F in repair Doors of 62.5/70 kVA DG Set including welding of defective portion and provision of fixing of new MS hinges/MS sheet of suitable size including replacement of all doors acoustic foam complete all as directed by Engr-in -charge.
S & F in repair Doors of 125/160/180 kVA DG Set including welding of defective portion and provision of fixing of new MS hinges/MS sheet of suitable size including replacement of all doors acoustic foam complete all as directed by Engr-in -charge.
DEDUCT/ LESS AGAINST SCHEDULE OF CREDIT
Bidders shall Quote the EQUAL AMOUNT (as per SCHEDULE OF CREDIT including NOTES therein of Tender documents) under Column 'UNIT RATE' (M)
ANIL RAI AND COMPANY (BID ID -3351439)
kabitaconstruction (BID ID -3350662)
M/s Sashi Enterprise (BID ID -3353584)
Singhs Construction (BID ID -3354545)
M/s Pramillabh Construction (BID ID -3354482)
M/S Dee Dee Singhania & Sons (BID ID -3351007)
M/S SHIVAYA ENGINEERING (BID ID -3355287)
M/S Kangkans (BID ID -3355458)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .