Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.6 Laccepted-finance | ₹12.6 L | accepted-finance |
Tender Value
₹9.8 L
EMD Value
₹13.4 L
Closing Date
24 Apr 2026, 10:30 pmClosed
Bangalore Electricity Supply Company Limited
VINAY KUMAR
Rectification of hazardous locations by Replacing of existing HT/LT bare Overhead Conductor with HT covered conductor/ LT AB Cable in Hosakote Division of Bangalore Rural Circle, BESCOM for a period of one year on Rate Contract under Total Turnkey Pecentaghe Quoting Basis.
BESCOM/2025-26/EL/WORK_INDENT1066
BESCOM/2025-26/EL/WORK_INDENT1066
Open
Electrical
Two Tender Document System(Two Cover)
BESCOM Corporate Office Procurement section Bengaluru
4 documents required · 2 mandatory · 2 optional
The Bidder should have successfully completed as prime contractor, similar works involving Replacement of existing HT overhead line by HT covered conductor and LT overhead lines by LT Aerial Bunched cable of value not less than 50% of the amount put to tender in the previous five financial years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) in any DISCOMs or any Government Electrical Utilities/PSUs.Note: Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. (Rs. 671.24 L)Documents to be uploaded:Scanned copy of the DWA and satisfactory Work completion certificate duly indicating the amount, issued by concerned tender inviting authority/Awarding Authority not below the rank of Executive Engineer or equivalent officer of the concerned DISCOMs/ Govt. Electrical Utilities/PSUs shall be uploaded
The Bidder should have executed minimum of 80% of HT covered conductor work and 80% of LT AB Cable work in any DISCOMs/ or any Government Electrical Utilities/PSUs on TTK in any One year during the previous 5 years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) and the above quantum of work should be in Satisfactory operation for at least One year as on the date of bid submission.(HT CC 76.67 Kms & LT ABC 50.07 Kms) Scanned copy of the DWA and satisfactory Work completion certificate duly indicating the quantity executed Financial Year wise, issued by concerned tender inviting authority/Awarding Authority not below the rank of Executive Engineer or equivalent officer of the concerned DISCOMs/ Govt. Electrical Utilities/PSUs shall be uploaded
The Bidder should be in existence as any of the following: a) Company incorporated in India under the Companies Act, 1956/2013 including any amendment thereto b) LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto c) Partnership Firm under Partnership Act, 1932 in India d) Sole Proprietorship Concern. Documents to be uploaded: a) i. Certificate of Incorporation issued by Registrar of Companies as per Companies Act 1956/2013 along with Memorandum of Association and Articles of Association of the Company.ii. Declaration from Directors of the Company in MBP-1 Form stating that they are not disqualified to be a Director of the Company along with the list of Companies in which they are Directors as on the date of inviting tender (s). b) i. Certification of Incorporation issued by Registrar of Companies as per LLP Act 2008. ii. Limited Liability Partnership Agreement of LLP. c) i. Partnership Deed, GST Registration certificate. ii. Shops & Establishment Registration certificate, as applicable. d) PAN/GST Registration certificate.
The Bidder should possess valid Class-I/ Super grade Electrical Contractors license issued by the Electrical Inspectorate should be in force on the date of submission of bids. Scanned copy of valid Class-1/Super grade Electrical Contractors License issued by Electrical Inspectorate shall be uploaded
Bid capacity: Bidder who meets the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity is equal to (AxNx1.5-B) Where, A is equal to Maximum value of works executed in any one year during the last five years (updated to FY in which tenders are invited), taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited. B is equal to Value, at FY in which tenders are invited price level, of existing commitments and on-going works to be completed during the next 12 months. Scanned copy of the statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works as per the format prescribed in the Techno-Commercial sheet shall be uploaded. The bidder shall note that the value of pendency of work should be considered based on financial progress achieved in the particular work as on the date of bid submission. The statement should be certified by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Even though the Bidders meet the above criteria, they are subject to be disqualified if they have: i) made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements. And/or ii) record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or iii) Participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. and/or iv) Black-Listed due to non-performance in execution of works by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. and/or v) Defaulted/short closed due to non-performance in execution of works against the order placed by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. Scanned copy of the self-declaration in the prescribed format as per Annexure on notarized stamp paper of Rs.500/- shall be uploaded. The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
Litigation History: The Tenderer should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years. A consistent history of awards involving litigation against the Tenderer or any partner may result in rejection of Bid. Scanned copy of the self-declaration on notarized stamp paper of Rs.500/- shall be uploaded.The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
Any Tenderer/ Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Tenderer is registered with the Competent Authority. (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.) Registration certificate issued by the competent authority shall be uploaded.
A certificate for having read the clauses is required to be submitted/uploaded by the tenderer separately in the following format: I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.) (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.) Scanned copy of the self-declaration in the prescribed format as per Annexure on notarized stamp paper of Rs.500/- shall be uploaded.The self declaration shall clearly indicate the tender enquiry no. and date on which declaration is done.
The Annual Turnover of the Bidder in at least two financial years should not be less than two times the amount put to tender in any of the previous five financial years i.e., (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25).Note: Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. Scanned copies of the audited Annual Accounts statements such as P&L statement, Balance sheets with UDIN of CA for the respective FYs shall be uploaded.
The Liquid Assets as on the last day of previous month or at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facility in any Nationalized/scheduled Bank shall not be lesser than 25% of the amount put to tender. The cash at bank, term deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized/scheduled Bank shall be uploaded. If the Tenderer has banking with more than one Bank, then the available liquid assets mentioned above on a particular date i.e., as on the last day of previous month or at a later date before submission of tender shall be the same date and time for all the banks. In case of Fund based credit facility, the certificate issued by the Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on the last day of previous month or at a later date, before submission of the bid shall be uploaded.
₹500
₹13.4 L
24 Apr 2026
27 Mar 2026
27 Apr 2026
2 Apr 2026
2 Apr 2026
Rectification of hazardous locations by Replacing of existing HT/LT bare Overhead Conductor with HT covered conductor/ LT AB Cable in Hosakote Division of Bangalore Rural Circle, BESCOM on Rate Contract under Total Turnkey Pecentaghe Quoting Basis.
Supply of 11 kv 70 sqmm Covered conductor
Supply of RCC Pole 9 Mtr long 145 Kg WL
Supply of Insulation Piercing connector covered to covered - IPC- TTDC 284014 FA
Supply of Insulation Piercing connector Bare to covered - IPC- NTDC 284014 FA
Supply of Anchor clamps suitable for 11KV covered conductor at Dead End points
Supply of Alingnment Tie
Supply of Supply of 11 kV, 45 kN Polymeric Insulator
Supply of DISC Insulator 45 kN Porcelain
Supply of 11 kV, Special 3 Pin Cross Arm - GI
Supply of 11 kV, Horizontal Cross Arm - Galvanised Iron (GI)
Supply of HT ST Support 50x8 mm Flat - GI
Supply of RCC Pole Clamp - GI
Supply of PSCC Pole (200 Kg WL) Clamp - GI
Supply of Full Threaded Bolt & Nut as per IS-1367 GI
Supply of End Cap for HT Covered Conductor
Supply of Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator
Supply of Guy Clamp - GI
Supply of Turn Buckle (GI)
Supply of Anchor Rod using 12 mm rounds/Guy Rod - GI
Supply of Guy wire 7/10 SWG
Supply of LT Aerial Bunched Cable of size 3X 95+1X70+1X16 Sq. mm Street Light (Insualted messanger cum Neutral)
Supply of PSCC Pole 9 mtr long 200 Kg WL
Supply of LT 4 Pin Cross Arm - GI
Supply of Guy wire 7/10 SWG
Supply of Three phase Distribution Box for 6 Connections
Supply of Piercing connector suitable for 16 sq.mm-95 Sq.mm AB Cable service connections
Supply of Piercing connector suitable for 16.sq.mm-95 sq.mm AB Cable -Street light connections.
Supply of Tee- Connectors - KZ3-95
Supply of Suspension Clamp - 25 to 95 Sqmm insulated messenger with bracket
Supply of Dead End Clamp/Anchor Clamp Assembly 70 to 210 Sqmm Insulated Messenger (Exclusive of Pole Clamp and Eye Hook)
Supply of Pole Clamp HT/LT AB Cable
Supply of Universal Hook, Bolts & Nuts
Supply of Pre insulated lugs CPTAU for 95 Sq.mm
Supply of End cap for 50/70 Sq.mm
Supply of Nylon Cable tie(100 Nos)
Supply of PVC insulated wire 10 Sq.mm (Coil of 100 Mtr)
Supply of PVC insulated wire 16 Sq.mm (Coil of 100 Mtr)
Supply of PVC insulated wire 25 Sq.mm (Coil of 100 Mtr)
Supply of GI Wire 10 Swg
Supply of PVC pipe 40 mm dia
Supply of PVC bend 40 mm dia
Supply of PVC Insulation Tape
Supply of PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010
Supply of Spiral Earth Electrode
Supply of No. 8 Strain Insulator
Supply of No. 15 Strain Insulator
Stringing of 11 kv 70 sqmm Covered conductor
Erection of RCC Pole 9 Mtr long 145 Kg WL
Erection of PSC Pole 9 mtr long 200 Kg WL
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC (Per Unit=Per Pit)
Erection of Insulation Piercing connector covered to covered - IPC- TTDC 284014 FA
Fixing of Insulation Piercing connector Bare to covered - IPC- NTDC 284014 FA
Erection of Anchor clamps suitable for 11KV covered conductor at Dead End points
Fixing of Alingnment Tie
Fixing of 11 kV, Horizontal Cross Arm - Galvanised Iron (GI)
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing.
Digging of Pit for GUY SET Ordinary Soil (Per Unit=Per Pit)
Releasing of RCC/PSCC Pole of 7.5 to 8 Mtr long
Releasing of RCC/PSCC Pole of 9 to 10 Mtr long
Releasing of Rabbit Conductor
Stringing of LT Aerial Bunched Cable of size 3X 95+1X70+1X16 Sq. mm Street Light (Insualted messanger cum Neutral)
Fixing of LT 4 Pin Cross Arm - GI
Fixing of Three phase Distribution Box for 6 Connections
Installation of Piercing connector suitable for 16 sq.mm-95 Sq.mm AB Cable service connections
Installation of Piercing connector suitable for 16.sq.mm-95 sq.mm AB Cable - Street light connections.
Fixing of Tee- Connectors - KZ3-95
Erection of Supply of Suspension Clamp - 25 to 95 Sqmm insulated messenger with bracket
Erection of Dead End Clamp/Anchor Clamp Assembly 70 to 210 Sqmm Insulated Messenger (Exclusive of Pole Clamp and Eye Hook)
Fixing of Pole Clamp HT/LT AB Cable
Fixing of Universal Hook, Bolts & Nuts
Installation of Pre insulated lugs CPTAU for 95 Sq.mm
Installation of End cap for 50/70 Sq.mm
Labour charges for Fixing of PVC Pipe for taking the leads from the conductor to the pole DB
Labour charges for Releasing & Refixing of over head service mains (single or 3 phase) for consumer installation & connection/ street lighting
Releasing of 4ACSR Conductor (Weasel)
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
SPECS01.zip
Others - specifications • 3.19 MB
Hosakote Tender document Enquiry No 1066.pdf
Tender Document • 2.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .