GE (N) P/TOKEN- 39 OF 2023-2024 REPAIR AND REPLAC/ MAINT OF OLD UNSV FITTING, PTL BOLLARDS NAME PLATE LIGHT, BEDSIDE FITTING SECURITY LIGHT FITTING AND OTHER ALLIED WORKS IN AGE E/M (N) UNDER GE (NORTH) PUNE.

Amount

Taking down the existing unserviceable street security/ flood light fitting any type/ capacity from pole including disconnecting and removing pipe bracket etc. complete all as directed.

Taking down/ out unserviceable UG cables of any cross sectional area and connections and joints including pipes, bricks, etc laying in trenches and keep in safe custody for reuse or for schedule of credit all as directed. Note : Earthwork will be measured and paid separately under relevant item.

Taking down old UNSV Rusted/ Damaged/ Broken steel/PCC pole of any type any description after demolition of PCC complete from the existing location and making good the ground complete all as directed.

Attending the complaints of non functional of Street Light/Security Light/ Flood Light of any make and capacity and repairing the fitting including taking down/out unserviceable street light fitting from the pole any type any height and checking electrical Connections, joints, carrying out repairs at site including replacement of under mentioned spares and refixing the same in its place and testing complete all as specified and as directed. Note :The spares of the fitting will be paid separatly under relavant items as supply only.

M & L for taking down unserviceable High Mast Light Fitting Set from any Height, not more then 14 mtr repairing the same at site by opening cover after bringing down by using control gear box symmetrically fitted along with steel rope, replacing unservicable fittings any type and unserviceable/ burnt cable, etc. as required at site, after repairing fixing in the same Position including necessary greasing the gear box, checking control mechanisum with minor repairs as required complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M & L for PCC (1:3:6) type C1(using 20 mm graded stone aggregate ) as in coping to LT poles solid blocks/ brick masonary around poles complete all as specified and as directed.

M & L for demolition of cement concrete around poles including excavation for taking out extra cable left as loop in ground near Street Light Pole and made good the disturbed cable upto the junction box complete all as specified and as directed. Note : (i) Rate for earth work, demolition of concrete and cutting of existing GI Pipe will deem to be included in this item rate.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size.

(a) 6 Sq mm 2 Core

(a) 10 Sq mm 4 Core

(b) 16 Sq mm 4 Core

(c) 25 Sq mm 4 Core

Laying only LT underground cable of any description and size (serviceable cable obtained from taking down here-in-before), laid in trenches/ surface of wall/ in GI pipe along with pole for connection to overhead lines including brass cable glands MS flat iron clamps, etc. and testing complete all as specified and as directed. (Note : (i) Earth works,HDPE duct pipe, GI protection pipe will be measured and paid separately under relevant items. (ii) Cost of shifting of cables at work sites as ordered is deemed to be included in the quoted unit rate.)

S&F in repair for factory made srteet light control panel, with and including all accessories such as control switch, contactor, automatic control relay, pre-wired etc. fixed on fabricated angle iron channel of suitable size and grouting on floor, Timelite-32/40 Amps, 3 Pole 415 volts-Astronomical Time switch (suitable for Pune area), Make -Havells cat part no IHXTS0306A Indo-Asian Cat No.TLO32ASO or equivalent in C&S

Supply and errection in true vertical position steel tubular LT poles, swaged , welded complete with CI base plate 6 mm thick of size 300 mm x 300 mm , finial taper plug pole cap , bolts and nuts and screws as per IS - 2713 (Pt-II) 1980 made out of ERW MS tubing with including drilling of holes of required size & Nos for fixing cross arms and 2 Nos holes on bottom & top of pole for insertion of cable including painting with two coat of aluminium paint over one coat of primer for exposed surface and two coats of bituminious paint for embeded portion in concrete , painting three yellow bands at lower porion of pole of 300 mm height at 300 mm spacing , painting Pole No with black paint at suitable height complete of type 410 SP-31 (9 mtrs long), includind taking down old UNSV Pole above ground level all as specified and directed .

Supply and laying GI tubing , light grade of 25 mm Dia, with all fittings including with 2 no L bow (all ISI marked) and laid in trenches / under roads / in drains / fixed to poles/wallswith required size flat iron clamp bolts, nuts and washers complete all as directed.

Supply and laying GI tubing , medium grade of 50 mm Dia, with all fittings (all ISI marked) and laid in trenches / under roads / in drains / fixed to poles/wallswith required size flat iron clamp bolts, nuts and washers complete all as directed.

Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Supply and errection in true vertical position for factory made steel tubular LT column for LED Column/pathway lighting 20 Watt having pressure die cast AL housing with specially designed optics provide uniform light distributuion fixed on company made type steel tubular LT pole fixed in ground all as specified and directed . Make :Monaco item code 340.PE8.NGG of JAQUAR , OR Equivalant in Havells, PHILIPS

S & F LED street light fitting 15 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make JAQUAR Cat No LSRTO1S016XC Bajaj ENXT P 15L WH PO PC SD, Halonix Cat No HLSLD-09H-15-CWL-R, Philips, Havells as approved.

S & F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make JAQUAR Cat No. LTRUMPOO25XC, Bajaj ENXT P 25L WH PO PC SD, Halonix Cat No HLSLD-09H-25-CWL-R , Philips, Havells as approved.

S & F LED street light fitting 45 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make JAQUAR LSRTO1S045XC or Bajaj ENXT P 54L WH PO PC SD, Halonix Cat No HLSLD-15-45-CWL-R-HL2-P , Philips, Havells as approved.

S & F in LED street light fitting 60 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make JAQUAR LSRTO15060XC or Bajaj ENXT P 72L WH CR PC SD / HAVELLS ENDURAOMNIPLUSSL60WLED757SASYTOPC

S & F LED street light fitting 90 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed. make JAQUAR Cat No. LSRTTOS090XC, Bajaj Cat No ZELA P108LWH PO TG SD, Halonix Cat No HLSLD-06-90-CWL-R-HL2-P or equivalent in Havells, Phillips as approved

Supply and fix LED street light fitting 120 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make JAQUAR Cat No. LSRTTOS120XC, Bajaj Cat No ZELA P144LWH PO TG SD, Halonix Cat No HLSLD-06-120-CWL-R-HL2-P or equivalent in Havells, Phillips as approved.

Supply and fix of SOLAR Hybrid System design with 17 W Integrated all-in-one solar street light with 3000 lumens & lithium ferro phosphate battery, solar panel and charger built into the luminaire. Pressure die cast aluminium for sturdiness and long life. Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting. SunStay with system efficacy of more than 175 lm/W. as per tender specs with L shape Clamp including removal of old unserviceable one any type fiitings complete all as specified and directed. Make: Philips/Havells Note:- Contractor has to submit NABL test lab report LM79 conforming above specifications as make approved by Department Incharge with 05 yeras of warranty for complete system.

Supply and fix of SOLAR Hybrid System design with 26 W Integrated all-in-one solar street light with 4500 lumens & lithium ferro phosphate battery, solar panel and charger built into the luminaire. Pressure die cast aluminium for sturdiness and long life. Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting. SunStay with system efficacy of more than 175 lm/W. as per specs with L shape Clamp including removal of old unserviceable one any type fiitings complete all as specified and directed. Make: Philips/Havells Note:- Contractor has to submit NABL test lab report LM79 conforming above specifications as make approved by Department Incharge with 05 yeras of warranty for complete system.

Supply and fix of Offgrid type Solar Bollard with inbuilt battery and solar panel, with a Remote controller to chose from pre programmed modes. System luminous flux should not be less than 300 lm with CCT 3000K and color rendering index >70, height of the assembly being 600 mm. The luminaire is suitable for outdoor use with IP65 protection with GI pipe of adequate size and lenght not to be less that 01 meter with PCC work including removal of old unserviceable one any type fiitings complete all as specified and directed. Make: Philips/Havells

Supply and fix for energy saving new generation environmental friendly long life versatile presure die cast AL housing IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of following capacity with pre wired suitable for sports lights fitting complete all as specified and as directed. Make: JAQUAR Cat Part No LFLDSLM200XC or equivalent of make Bajaj , Philips, Havells as approved

(a) Flood Light 200 Watt Make:-JAQUAR Cat Part No LFLDSLM200XC or equivalent of make Bajaj , Philips, Havells as approved

(b) Flood Light 150 Watt Make:- JAQUAR Cat Part No LFLDSLM150XC or equivalent of make Bajaj , Philips, Wipro, Havells as approved

(c) Flood Light 100 Watt Make:- JAQUAR Cat Part No LFLDSLM100XC or equivalent of make Bajaj , Philips, Wipro, Havells as approved

(d) Flood Light 50 Watt Make: JAQUAR Cat No. LFRO01S050XC, Bajaj Cat No GLEM F 55L WH SY PC SD V2 , Halonix Cat No HLFLD-ML01-50-CWL-R-SPD-HL2-P or equivalent in Havells, Phillips as approved .

S & F in repair Bush and spike LED light with die cast aluminium housing with transparent glass diffuser fitting of capacity 8 watts and IP 66 protection icomplete all as specified and as directed Make : JAQUAR Cat No LSPK04R108XW or equavalent in Bajaj BGSBL 9W LED WW, Philips, Wipro, Havells.

S & F in repair LED post top lantern fitting New generation, energy saving, environmental friendly, long life aesthetically designed Die cast aluminium housing, with high power LED as light source complete with all accessories fixed on GI pipe 40mm dia complete all as specified and directed. Make : JAQUAR Cat No MONACO 340.33.NGG Bajaj Cat part No BGCTN 25W LED WW, Halonix Cat No HLPT-S04-25-CW or Shakti Cat No SZPGPMX025

S & F in repair decorative LED bollard with aluminum die casting, with adequate size elecrical connections complete all as specified and as directed. Make: Jaquar Monaco Cat part No 340.44.NGG ,Havells Cat no BAMBOOBL8WLED830SSYMTOPCM, Halonix Cat No HLOB-95-10-ww-01 (LLD0003139)

S&F in repair for fixing neon LED Rope light Tri colour LEds 18 Mtr length on LT poles. LED rope light has to be fixed with binding wire at equal distance on pole And should be shockproof, Waterproof suitable for Outdoor purpose, Flexible Strip with and including suitable Adapter for Decoration purpose. Note:- Cost of LED rope light (18 Mtr) is deemed to be included in quoted rates. Make Havells/Phillips/Jaquar

Supply and fix for junction box, for street lights of size 250 x 300 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unserviceable box complete all as specified and as directed.

Supply and fix in repair for Junction box IP 66 ready made type box size 130x130x 77 mm wheather proof for out door installation with knockouts for cable entry with necessary connections and fixed the box on poles by means of mild steel flat iron with suitable size of nut, bolts and washers complete all as specified and as directed by Engineer-in-Charge. Make: Hensel KF 0606B or Equivalant in Sintex)

Supply and fixing in repair bracket for LED street light fitting of any type/wattage made out of 32mm GI tubing light grade made to shape including clamps, nut bolts washers etc and fixed in repairs complete all as directed by Engineer-in-Charge.

Supply and fix in repair for surface mounting 24 hours Analog Time Switches, shortest switching time 30 min., 240 Volt, 50 Hz, One module, and suitable for single street light fitting in existing panel including necessary electrical connections complete all as specified and as directed. Make Legrand, Havells, L & T, Schneider.

Supply and fix in repair for 4 pole contactor 60/63 Amps 415 Volt suitable for street light time switch in existing panel including necessary electrical connections all as specified and as directed. Make L & T, Schneider, ABB

Supply only driver suitable for LED street Light Fitting of compatible capacity 45 watts. Make Bajaj or equivalent of Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street Light Fitting of compatible capacity 60 watts. Make Bajaj or equivalent of Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street Light Fitting of compatible capacity 90 watts. Make Bajaj or equivalent of Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street Light Fitting of compatible capacity 120 watts. Make Bajaj or equivalent of Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply and fix in repair driver suitable for 10W LED garden Light Fitting of compatible capacity 10 watts. Make Bajaj or equivalent of Crompton Greaves/ Havells/ Jaquar.

S & F in repair for recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 36 watts, white powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Havells/ Philips

S & F in repair for recess mounted square LED panel 18 watts, IP 20, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR11-02-18-CW, Jaquar LNEP01S024XN, Phillips SM200C LED115 6500 PSU OD WH/shakti.

S & F in repair for LED down light recess mounted luminare 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Bajaj Cat Part No BZSLO nxt 15L LED WH SD or its equavalent in Wipro, Philips complete all as directed by Engineer- in-charge

S & F in repair for LED downlight surface mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz including taking down old unserviceable fitting complete all as directed Make :- Jaquar LNVE02R012SN , philips/ Havells

S & F in repair wall mounted LED 3/6 watts bed side lamp with necessary electrical connections complete all as specified and as directed. Make: Philips, Havells, Jaguar

S & F in repair wall mounted LED 3/6 watts PICTURE Light flexible and adjustable to any direction with necessary electrical connections complete all as specified and as directed. Make: Philips, Havells, Jaguar

Supply and fix in repair for wall mounted LED 20watts with lumens out put not less than 2000 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed. Make: Bajaj Cat No. BCLAB 20W, JAQUAR Cat part No LGLZ01X020XN or equvalent of make Philips/ Havells as approved.

S & F in repair for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-20-CW-INV or equivalent Philips/ Jaquar

S & F LED Inverter street light fitting 45 Watt 230V Inverter fitting . The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as directed Make Halonix Cat No HLSLD-ML-04-45-CWL-INV-RTC/IRSEN-R , OR EQUIVALANT IN Bajaj , Philips, Havells as approved.

Material and labour for preparation of old painted surfaces by scraping and removing old paints, rust, etc. from steel tubular poles 7.0 to 7.5 metres length pole (above the planting depth and PCC copings) and mild steel cross arms, cable protection pipe, brackets, etc. and applying one coat of red oxide zinc chrome primer, bottom of pole to be painted with synthatic enamel radium paint of alternate yellow and black strips (4 No. each strip 150 mm wide) and remaining portion of pole and cross arms, cable protection pipe, brackets, etc painted with Two Coats of aluminium paint complete all as specified and as directed.

Material and labour for writing lettering on steel tubular/ pre-stressed concrete pole (8 Cm in height) with synthetic enamel paint (white) on base of black paint in round shape of 15 Cm dia complete all as specified and as directed.

M & L for Trimming the branches of trees not more than 50 mm dia.and upto 5 Mtr distance where touching the street light pole or obstracting the street lights, without damaging the pole. The rates are deemed with & including cleaning the ground area after trimming trees and dump the leafs and branches at the site where directed.

Supply and fixing in repair PVC insulated and sheathed 1100 volt grade of size 4 sqmm Aluminum 3 core complete with lugs etc all as specified and as directed by engineer-in-charge.

Supply and fixing in repair PVC insulated and sheathed 1100 volt grade of copper cable 2 core of size 4 sqmm 2 core complete all as specified and as directed by engineer-in-charge.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Suchit constructions

Mahindra Electric Stores

PROLINK COMPUTERS

KSP ENTERPRISES

CHAITANYA WINDWELL