Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹7.2 L+₹56,262.75 (8.49%)Rejected-Finance 72 USMAN ENCAVE SECTOR O ALIGANJ LUCKNOW 226004 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226004 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹7.2 L+₹62,214 (9.39%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 |
Tender Value
₹9.7 L
EMD Value
₹19,300
Closing Date
6 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF Memaura
AGE (I) AF Memaura
PROVN OF CERTAIN E/M AND B/R WORKS IN SIGNAL SECTION, OFFICERS MESS, ADC, OMQs AND STN ARMOURY AND PROVN OF IRON GRILL DOOR ON DOOR AND WINDOWS AT CERTAIN OTM ACCN AND PROVISION OF IRON SHEET OVER DRAIN AT COMMON AREAS AT AF STN MEMAURA
2023_MES_631164_1
8326/E8
Open Tender
Civil Works
Works
183 days
AGE (I) AF Memaura
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AF Memaura
₹19,300
Yes
2 Apr 2024
5 Dec 2023
8 Jan 2024
5 Dec 2023
6 Jan 2024
19 Dec 2023
Amount
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement 1:4, finished even and smooth without using extra cement complete all as specified and directed.
Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm etc complete all as specified and directed.
S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee,angles,channel or flat section) including distance pieces, cleats of Fe 410 or (Gde-E-250) etc complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet (Make: Tata bluescope/ Jindal ) 0.50mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa minimum yield strength conforming to IS - 513 (1994) coated with hot dip alloy of 55% aluminium + 43.50%Zinc +1.50% silicon and finished with resin coat ( of thickness not less than 35 micron) on both surface @150gm/sqm of coating (total both surfaces) of approved colour as in roof covering/cladding, fixed with self tapping screws (make hilty/fissers), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Note : (i) The colour of sheet for bldg shall be approved by Engr-in-Charge. (ii) Sheeting shall be fixed of at any height.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
M & L for hardcore of broken bricks of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing surfaces of concrete in sub floors, sub bases, etc, even and rough to receive topping layer/screed bed/cement plaster complete all as specified and directed
M&L Virified Ceramic tiles joint free 10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed in cement mortar 1:6 complete all as specifed.
M&L for 300 x 600 x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 complete all as specifed.
M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing complete over and including 10mm plaster in cement mortar 1:4 complete all as specified and directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing over including 20mm screed bed in CM 1:6 complete all as specified and directed.
M&L for point wiring for light / fan/ Exhaust fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including Steel concealed conduit of medium grade (ISI Marked) having dia. not less than 20mm with all fittings including MS galvanised pressed steel terminal sunken boxes of thickness not less than 1.12mm of required module complete with frame plate and cover plate of required module for mounting modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified and directed
Supply and fixing flame proof exhaust fan of 12" sweep, AC, single phase, 230 volts, 1440 RPM complete with making good distrubed surfaces to match with the adjoining surfaces all as specified and directed.
Cutting walls of any type, making holes for fixing of exhaust fan any size or sweep incl nut & bolts and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
S & F Switch Piano 5A single pole, complete all as specified and directed.
S & F PVC Insulated & PVC sheathed 6 sqmm 2 core service cable aluminium conductor, 1100 volts grade, complete all as specified and directed.
M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n. exc 10 cm girth
M&L Rigid non-metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc
M & L for GI tubing 25 mm dia (Medium grade) with all necessary fitting laid in trenches/PCC foot path/wall/flooring/under road crossing, or fixed on poles/walls etc complete all as specified and as directed.
Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 2 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S & F MCB SPN 240 volts, 'C' curve of rating 10 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
Supply, Installation, Testing and Commissioning of Maintenance Free Earthing based on 2 meters long copper Earthing Electrode 48.4 mm outer dia duly filled with CCM and electrode should be fixed/brazing with 20 x 3 mm copper strip including excavation/earth work in any strata and with PVC earth pit cover (Earth Pit not less than 2M deep below ground level). The Electrode is surrounded by BFC Chemical.Earth resistance value should be less than 01 Ohm. Chemical compound powder (BFC) to be provided minimum 25 kg per site. Copper Strip size: 20 x 3 mm shall be provided upto 7.5 meters including earth pit PVC cover and Earth Test point complete all as specified and directed.including demolition of existing earth pit. Note : After completion of earthing pit earth earth resistance will be measured & if earth resistance found not satisfactory the same will be done again and the cost is deemed to be included in the quated rate and nothing extra shall be payable on this account.
S & F 1.5 sqmm Solid copper conductor single core, drawn through PVC conduit conceal in wall and connected to the eqpt with necessary lugs, nuts & bolts complete all as specified and directed. (Note Chases cutting & PVC conduit paid separately)
M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n. exc 10 cm girth
M&L Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc
M&L for point wiring for light / fan/ Exhaust fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade (ISI Marked) having dia. not less than 20mm with all fittings including MS galvanised pressed steel terminal sunken boxes of thickness not less than 1.12mm of required module complete with frame plate and cover plate of required module for mounting modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified and directed
S&F switch piano type 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed.
S & F ceiling rose three terminals complete all as specified and directed.
Supply and fixing air ventilating fan 250 mm sweep PVC body, AC, single phase, 230 volts, 1200 RPM complete with in-built louvers shutters and including PVC insulated 2 core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.
Cutting walls of any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and above.
S & F framed doors or gates or other section with gusset plates,rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guiders) and hanging; also fastening and fixing complete all as specified and directed.
S & F mild steel, plain, black sheet (1.6mm) in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. as required
S & F of MS work as guard bar welded to window frame work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) in coping,kneelers, apex, bed plates, kerbs not provided, water troughs and like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
S & F mild steel plates (chequered) for covering drain with hinges and handles conforming to Fe.290.Gde-E-165 complete all as specified and above.
S & F framed brackets of angles or tees with web and flanges cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.410 or Fe 310 complete all as specified and directed .
Material & labour for preparation of new or old previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Unnati Engineers
m/s pal associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .