GE(H)-38/2020-21 PROVN OF INSTALLATION OF 82 STREET LIGHTS WITH POLES AND CONNECTED ITEMS AND PROVN OF OTHER SANCTIONED E/M REVNUE/MINOR WORKS UNDER GE HISAR AT MIL STN HISAR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches not exc 1.5 metre wide and exc 1.5 metre and not exc 3.0 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in hard/dense soil etc complete all as specified and as directed.

Returning filling in incl spreading leveling watering and well ramming in layers n. exc 25cm thick etc complete all as specified and as directed.

Removing excavated material to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point etc complete all as specified and as directed.

Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick. Note :- The rate quoted including removal of surplus earth obtained from excavation under item 1.00 to 3.00 here-in-before shall be used for filling.

M&L for Sand cushioning 230mm thickness with dry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punned down to 180mm after laying of cable in trenches for protection of cable complete all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed.

Material & labour cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Material & labour PCC (1:3:6) type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles complete all as specified and directed.

Supply, erecting & fixing in true vertical position pre stressed concrete pole conforming to IS-1678 of 9 mtr long, 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class 10 complete all as specified and directed. Note :- Earth work & PCC shall be measured and paid separately.

Supply , laying , jointing, testing and commissioning of 10 sqmm 2 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply , laying , jointing, testing and commissioning of 16 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply , laying , jointing, testing and commissioning of 25 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply , laying , jointing, testing and commissioning of 95 sqmm 3.5 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth with using extra cement complete all as specified & as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint on walls all as specified & as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil all as specified.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Gde E-165 (Fe 290) all as specified and directed.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing and line wire shall be measured and paid for separately under relevant item of BoQ.

Supply only mild steel galvanized chain link fencing any size or type as directed complete all as specified. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for separately under relevant item of BoQ.

Supply only mild steel round bars as in line wire fixed to chain link fencing and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm bot not exc 10cm long and dia of neck not less than 10mm complete all as specified.

S&F mild steel framed work as in steel frames, chowkats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Isolating 11 KV HT overhead supply from the substation and earth the complete system properly, disconnecting complete electric supply of the Transformer from HT and LT side including earthing strips, removing transformer of Cap upto 400 KVA and taking out from the substation or taking down from 2/4 pole structiure and transporting to newly constructed foundation platform including reconnecting, installation, commissioning & testing of transformer all as diretced by Engineer-in-charge. Note :- Foundation platform will be measured and paid separately under relevant items of BoQ.

M&L for Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’, complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).'

M&L for point wiring for one light point controlled by one, one way switch with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’, complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).'

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F flush type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

Supply, installation & testing Geyser (water storage type) of capacity 25 litre vertical mounting type, 5 star rating, suitable for 220-240V, SP, 50 Hz AC supply fixed with & including ‘Anchor’ type /fastener type bolts & nuts (Set of 4 bolts of 10mm dia 150mm long with nuts & washers) into the wall grouted properly to hold the geyser and making good the disturbed surface as original all as per manufacturer’s instructions & as directed. Make : Cat Part "Monza Turbo" of Havellls or equivalent of makes as mentioned in Appx 'C' list of makes.

S&F hot water PVC connection heavy duty, 450 mm long suitable for 15 mm bore GI pipe including brass nuts on both sides complete all as specified.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket single phase 20 A, complete with 01 No. MCB 20 Amp, SPN complete. Make :- Optipro of Indo Asian Cat Part No 811956 or equivalent of makes mentioned in list of makes here-in-after .

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors all as specified.

S&F 15 mm bore bib tap, long shank, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified.

S&F Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 15mm bore all as specified.

S & F sheet metal enclosure, double door type, IP protection 43 having door earthing, suitable for fixing MCBs, SPN with 200 Amps rated bus bar, 4 way, 240 Volts. Make :- Optipro of Indo Asian Cat Part No 811805 or equivalent of makes mentioned in list of makes here-in-after.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, complete. Note :-Make of MCB shall be same of that DB.

S & F MCB SPN, 32 Amps 240 Volts , 'C' curve, 10 KA, complete. Note :-Make of MCB shall be same of that DB.

S & F main switch iron clad rewirable type SPN 63 Amp 240 Volts fixed on pole / panel / wall etc including making connections with and including suitable size of cable of suitable type, size and length complete all as specified & directed.

S & F main switch iron clad rewirable type SPN 32 Amp 240 Volts fixed on pole / panel / wall etc including making connections with and including copper conductor cable of suitable size, type and length complete all as specified & directed.

Supply, installation, commissioning & testing of Refrigerator frost free, Capacity 230 litre or nearest higher capacity, 5 star rating, Single door, electric driven, single phase, 230 Volt, 50 Hz, AC, all as specified & as directed. Make :- Cat No 23K282ZRZ of Samsung or Cat No GL-D241ASOY of LG and Cat No RD EDGE PRU of Godrej or equivalent of make as mentioned in Appendix 'C'.

Supply & fixing Voltage Stabilizer of capacity 1 KVA for automatic operation, Single Phase, naturally air cooled, indoor type, designed for input variation between 190 Volt to 250 Volt and with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and connecting up all as per manufacturer’s instructions & as directed.

Supply & Fixing Evaporative Air Cooler in steel body (Desert Cooler) with propeller type cooler fan with motor (ISI marked) 1440 RPM (4 Pole) three speeds, nominal capacity 4000 Cum/hour, fan size 500mm, type of blade - Aluminium blade, submersible water pump, filter pads, power consumption - 325 Watts (maximum), electric driven, single phase, 230 Volts, 50 Hz, capacitor 4 mfd, including all accessories, complete all as specified & as directed. Notes :- (i) Filter panels, front, grill and top of the cooler body shall be made of 0.80 mm galvanized steel sheet. The sump tank and rest of the body shall be made of 1.00 mm thick galvanized steel sheet. The galvanised steel sheet shall be ISI marked and shall have zinc coating not less than 100 gms/sqm and shall conform to IS : 277. (ii) All internal surfaces including inside of the tank, fan blades, motor body, pump, pump body and frame shall be painted with water resistant paint conforming to IS: 9862. The outer surface of the cooler shall be spray painted with synthetic enamel paint of approved shade/tint. (iii) The filter pads shall contain wood wool. The filter pads shall be fixed over the panel and secured by clamping guard of galvanized wire of 2mm dia (approx.) and net size 100 mm (approx.) square/rectangular. The wire guard shall be fixed in the clamps to avoid any sagging. (iv) Cooler fan with motor and submersible pump shall be of make :- Khaitan / Usha / Bajaj / GEC / Crompton / Orient / Polar / Havells. Makes of other material such as switches, copper cord etc shall be as specified in Particular specifications / Appendices. (v) Above aspects shall deemed to be included in quoted rates.

S&F street light LED light fitting 30 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP65 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device, fixed on wall / pole all as specified and directed. Make : Cat Part No ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC of Eundure Citylite Platinum Plus of Havells or PCGLS T1 30 N (Item Code PUBO506026) of Polycab or LTESSI30WLED of C&S or equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

S&F street light LED light fitting 60 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07, fixed on wall / pole all as specified and directed. Make : Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPC of Endura Peral Neo series of Havells or PCGLS T1 60 N (Item Code PUBO506015) of Polycab or LTESST60WLED/LS of C&S or equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

S&F street light LED light fitting 90 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device, fixed on wall / pole all as specified and directed. Make : Cat Part No ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO of Endura Peral Plus series of Havells or PCGLS T1 90 N (Item Code PUBO506010) of Polycab or LTESST90WLED/LS of C&S or equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

S&F street light junction box of size not less than 310mmx285mmx180mm LT (415 Volts, 3 Phase, 4 wire supply), factory assembled, outdoor type, 2mm thick MS sheet, CRCA sheet, single door system lockable by keys, painted externally and internally with two coats of synthetic enamel grey paint (first quality) over a coat of red oxide primer complete comprising of following :- (a) Aluminium bus bar of cap not less than 60 Amps mounted on PVC insulators, length not less than 150mm (b) Aluminium bus bar should have multi holes for connectioons (c) MCB SP 6-10 Amp, Type 'C' - 01 No mounted on MCB channel (d) Two nos of cable gland suitable for cable 16 sqmm 4 core (e) The cut out box should be fixed with pole by 02 x MS clamp not less than 25mmx5mm with suitable nut, bolt and washer. Note :- Rate quoted shall deemed to includes for MS clamp, nut, bolt & washer etc duly painted with one primer coat, one under coat and one finishing coat of aluminium paint.

Supply and fixing mounting bracket (suitable for fixing/holding street/security light fittings) made of 40mm bore GI pipe ‘light grade’ 1.50m long, bent to shape at required angle, fixed on pole with MS clamp of size 40x5mm - 02 Nos, nuts, bolts & washers, complete all as directed. Note :- Rate quoted shall deemed to includes for MS clamp, nut, bolt & washer etc duly painted with one primer coat, one under coat and one finishing coat of aluminium paint .

Supply & fixing cable PVC insulated and PVC sheathed size 2.5 sqmm 1100 Volts grade, single core multistranded aluminium conductor complete.

Supply & fixing OFF LOAD change over switch 415 V in sheet metal enclosure 4 Pole of capacity 200 Amp complete.

Supply & fixing PVC conduit 20mm dia including fixing clamps, nut, bolts for stay to pipe complete all as specified and directed.

Supply, installation, commissioning and testing of LT Feeder pillar board, Kiosk type , 415 Volts, 50 Hz , 3-phase, 4 wire supply, CPRI approved, factory assembled ,outdoor type weather and vermin proof (Protection Class IP-65) made out of 40m x 40mm x 5mm angle iron frame, 3.15mm thick (for external) and 2mm thick (for internal) MS Sheet CRCA sheet duly campartmentalized for each control MCCBs, single door system lockable keys, the outer cell shall have both side hinged, front and back openable, double door system opening for external, rubber lining, locking arrangement, painted externally and internally with Nine tank pretreatment solution prior to a Powder coat of SIEMENS grey shade RAL 7032 (Berger/Nerolac) (first quality) over a coat of red oxide primer complete mounted on angle iron frame 40mmx40mmx5mm legs high above GL and 15cm embedded in ground with and including block of PCC 1:3:6 type C2 of size 30cmx30cmx30cm complete including and comprising of the following complete all as specified and directed :-

(a) Bus bar chamber comprising 4 Nos Aluminium bus bars of size not less than 1.5 times of incoming / outgoing MCCB. All spreader terminals of MCCBs should be connected to bus bars.

(c) Outgoing (i) MCCB 4 pole , LT 415 Volts, 50 Hz, AC, 160 Amps rating and 35/36 KA rupturing capacity, thermal & magnetic release adjustable type ( Ics =100%Icu).- 02 Nos. Note:-(i) All incoming /outgoing cables shall be connected through suitable size gland plate/glands and these will be connected with Al Lugs of suitable size also( if necessary).

Supply, installation, commissioning and testing of LT Feeder pillar board, Kiosk type , 415 Volts, 50 Hz , 3-phase, 4 wire supply, CPRI approved, factory assembled ,outdoor type weather and vermin proof (Protection Class IP-65) made out of 40m x 40mm x 5mm angle iron frame, 3.15mm thick (for external) and 2mm thick (for internal) MS Sheet CRCA sheet duly campartmentalized for each control MCCBs, single door system lockable keys, the outer cell shall have both side hinged, front and back openable, double door system opening for external, rubber lining, locking arrangement, painted externally and internally with Nine tank pretreatment solution prior to a Powder coat of SIEMENS grey shade RAL 7032 (Berger/Nerolac) (first quality) over a coat of red oxide primer complete mounted on angle iron frame 40mmx40mmx5mm legs high above GL and 15cm embedded in ground with and including block of PCC 1:3:6 type C2 of size 30cmx30cmx30cm complete including and comprising of the following complete all as specified and directed :-

(a) Bus bar chamber comprising 4 Nos Aluminium bus bars of size not less than 1.5 times of incoming / outgoing MCCB. All spreader terminals of MCCBs should be connected to bus bars.

(c) Outgoing (i) MCCB 4 pole , LT 415 Volts, 50 Hz, AC, 160 Amps rating and 35/36 KA rupturing capacity, thermal & magnetic release adjustable type ( Ics =100%Icu).- 02 Nos. (ii) MCCB 4 pole , LT 415 Volts, 50 Hz, AC, 100 Amps rating and 16 KA rupturing capacity, thermal & magnetic release adjustable type ( Ics =100%Icu).- 02 Nos Note:-(i) All incoming /outgoing cables shall be connected through suitable size gland plate/glands and these will be connected with Al Lugs of suitable size also( if necessary).

M & L for earthing complete with galvanized iron earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to the galvanized earth lead 32x6mm by means of GI bolts/nuts/ washers, protected by 40mm bore GI light grade pipe from earth plate and upto 3m along pole fixed with 2 clamps made from mild steel flat iron 25x3mm bolts, nuts and washers etc. Earth plate shall be surrounded by packed layer of coal dust 300mm and common salt 15cm thick all around bottom and top, 20mm GI medium grade pipe for watering and including funnel , wire mesh , RCC 1:2:4 type B-1 using 20 mm graded stone aggregate cover of size 30 cm X 30 cm X 8 cm thick reinforced with expanded metal weighing not less than 4Kg/Sqm, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in earthing pit including necessary excavation and earth work, all as specified and shown in electrical plate No-3 of SSR part-I and connected to earthing point and testing on completion. Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners.

m/s Rajesh Kumar

M/S D.N Choudhary

unique power & control system

SAINI ELECTRIC STORE

VERMA BROTHERS