Supplying and installation of furniture in hostel block and dining block at permanent campus of IIM Ranchi

INDIAN INSTITUTE OF MANAGEMENT, RANCHI

ESTIMATE FOR HOSTEL BLOCK AND DINING BLOCK FURNITURE

Product Description Product Specification Unit Rs.) Including QTY

Suplying and Installation of Single bed With Storage, minimum Overall Size : Length - (2000-

Material :Bed Structure consist of metal frames made of M.S. 25 mm square

Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition Panels & Plinths

are made of 25 mm Thick Prelaminated Particle Board. Head board & Tail board is made of

25 mm thick Prelaminated Particle board. All the exposed edges are edge banded with

Single bed with 2.0mm thick PVC edge. Side board & mattress panels of Bed are made of 18 mm thick

Storage Prelaminated Particle Board with all the exposed edges edge banded with 0.8 mm thick

PVC edge banding. Understorage present with manual opening from top.Construction :

Knock Down construction. Finish : 25 mm thick Prelaminated Particle Board .18 mm thick

Prelaminated Particle Board .Metal frames are powder coated to thickness of minimum 40-

50 microns(+-10).

Suplying and Installation of minimum size:916mm(W) x 486mm(D) x

1980mm(H).Construction & Material:Welded construction. 0.7mm thk CRCA for shelf.

0.8mm thk CRCA for back & locker shelf .0.8mm thk HSCR for doors .0.9mm thk CRCA for

all other components .Locking & handle, Mazak handle , Three way locking mechanism

with shooting bolt .Locker:Fixed full locker with secret

Steel Almira with compartment.Hinged Door:2 way locking mechanism for locker door.Shelving: Height wise

Locker and mirror adjustable shelf mounting .2Nos. of adjustable full Shelf .Hanging Rod & Tie bar:1.0mm thk

ERW tube for hanging rod . 1.0mm thk aluminum for tie bar .Leveler:M10 screw type

leveler with hex plastic base .Full length mirror shall be provided.Finish:Epoxy Powder

coated to the thickness of 50 microns (+-10).

Digitally signed by

Product Description Product Specification Unit Rs.) Including QTY

Supplying and installation in position 6 seater canteen table Canteen table of the

following specifications:

6 Seater Membrane minimum size shall be (1700-1750) mm Width x (1150-1200)

mm Depth x (700-750) mm Height . Top shall be 25 mm thick base material shall

be Minimum 20-25 mm MDF board . PVC Membrane foil on top 8 x 2 mm deep

groove on centre of the table as graphics . Specially profiled edge to prevent

striping of foil & comfortable touch . laminate on bottom surface . The

Understructure shall be having bend pipe structure of MS powder coated . Pipe

minimum dia 30-38 mm , 2 mm thick and it shall be fitted with top by SS machine

screws . Legs shall be of SS and minimum 30-38 mm dia. pipe legs are fixed with

inderstructure and table top . Glide shall be of Plastic fixed at the understructure to

prevent the damage of table top during

Supplying and installation in position stackable cafe chairs of the follwing

specifications:

The seat and back shall be made up of injection moulded indoor grade UV

resistance Poly Propylene compound .SEAT MINIMUM SIZE : (46-52.5) cm. (W)

(H).Undurstructure of the chair shall be tubular welded frame made from minimum

without armrest

0.0128 cm Stainless Steel (202-304) grade tube. The tubes shall be buff polished

to give shiny finish. The shoes shall be made of indoor grade UV resistance

PolyPropylene compound and snap fitted with tubular frame.Overall Dimensions of

the chair shall be (46-52.5) cm W X (46-55.8)cm D X(80- 84.5) cm H and Seat

Digitally signed by