Development Of Shree Mahalaxmi Jagdamba Sansthan, Koradi, Tah- Kamptee, Nagpur. (Phase III and IV)

Amount

Excavation for foundation in earth, Soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. SSR 2022-23 Item No. 21.02 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means. SSR S, .Sr.No. 725, Page No. 153, Bd A2, Page One Number 259

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means. SSR Sr. No. 727, Page No. 154, Bd A2, Page One Number 259.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m ) By Mechanical Means. SSR 2022-23 Item No. 21.14 Sr.No. 730, Page No. 154, Bd.A.4 Page No. 259.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling etc including trimming and levelling the bed, removing the excavated material up to a distance of 50 m. beyond the building area and stacking as directed, dewatering, and back filling with available murum, ramming, watering etc. complete. (Lift upto 1.5 m) By Mechanical means. SSR 2022-23 Item No. 21.20 Sr.No.735, Page No. 155, Bd.A.6 Page No. 260.

Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc. complete.SSR 2022-23 Item No. 21.36 Sr.No.750, Page No. 157 Bd.A.10 Page No. 262.

Filling in plinth and floors with Contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 2022-23 Item No. 21.37 Sr.No.751, Page No. 157 Bd.A.11 Page No. 263.

Providing dry / trap /granite / quartzite Rubble Stone Soling 15cm to 20cm thick including hand packing and compacting etc. complete. SSR2022-23 Item No. 21.38 Sr.No. 752, Page No. 157, BdA 12 Page No.264

Providing Soling using 80mm size trap metal in 15cm layer including filling voids with Crushed Sand / Grit, ramming, watering etc. complete. SSR 2022-23 Item No. 21.40 Sr. No. 754, Page No.157, As directed by Engineer-In-Charge.

Providing and Fabricating Structural Steel Work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed, including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 2022-23 Item No. 23.01 Sr. No. 816, Page No. 173, BdC 2 Page No.275.

Providing sacrificial shuttering for deck slab made up with galvanised Cold Rolled Cold Annealed (CRCA) steel of 310 MPA Grade with all Contractor's material, labour, erection fixing, welding etc. (Decking Sheet) SSR 2022-23 Item No. 17.70 Sr.No. 658, Page No. 141.

Providing Structural steel work in Hollow Sections of various thickness and sizes in Square, Rectangular and Round shape from 25mm to 450mm section as per IS-4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, Making rivetted / bolted / welded connections and painting coomplete. SSR 2022-23 Item No. 23.12 Sr. No. 826, Page No. 174 As directed by Engineer-In-Charge.

Providing and fixing in position Barbed Wire of 2.50mm dia. As per drawing etc. complete, and as directed by Engineer-In-Charge.

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth. SSR 2022-23 Item No. 53.01, Sr.No. 2106, Page No. 449, Bd. C2 Page No.275.

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10 mm dia 200mm depth. SSR 2022-23 Item No. 53.02, Sr.No. 2107, Page No. 449, Bd. Cr Page No. 275.

Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth. SSR2022-23, Item No. 53.03, Sr.No.2128, Page No. 460, Bd.C2 Page No. 275.

Providing and laying Cast in situ/Ready Mix cement Concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 24.01 Sr.No.827, Page No. 175 Bd. E. 1 Page No. 287

Providing and laying Cast in situ/Ready Mixcement Concrete in M20 of trap/ granite/quartzite/gneiss metal for Steps / Screed / Grade Slab, including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 24.06 Sr. No. 829, Page No. 175, Bd.E2 Page No. 288 and B7 Page No. 38.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in Foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.13, Sr.No.837, Page No. 178 Bd.F.3 Page No. 298 and B.7, Page No.38.

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in Foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.19, Sr. No. 840, Page No.179, Bd.F 3, Page o.298 and B7, Page No. 38.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.33, Sr.No. 842, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.33, Sr.No. 842, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.33, Sr.No. 842, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.52, Sr.No.847, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.52, Sr.No.847, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.52, Sr.No.847, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs / Sloping Slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.72, Sr.No.852, Page No.182, Bd.F.8 Page No. 302 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs / Sloping Slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.72, Sr.No.852, Page No.182, Bd.F.8 Page No. 302 and B.7, Page No.38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.72, Sr.No.852, Page No.182, Bd.F.8 Page No. 302 and B.7, Page No.38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.19, Sr. No. 861, Page No. 185, Bd.F 11, Page No.304 and Bd 7 Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FIRST FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. GROUND FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FIRST FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SECOND FLOOR

Providing and fixing of 65/400 Self supported Secret Fix ROOFING SYSTEM in 0.9mm thick in AA-3004 Aluminium Alloy including accessories and flashing comprising of following layers. System Warranty - 15 years and Leakage Warranty - 10 years. 1. Top Layer - Providing and fixing 65mm rib height and 400mm width of straight / curved / tapered profiled panel, manufactured from Aluminium Alloy AA-5052 as specified in BS ENI396:2007, minimum material thickness of 0.9mm with 60 microns Durabond / 60microns PVDF paint finish (colour as per Consultant's choice). Aluminium sheet make, GRAMCO Baharain / Euramax E.U. / Hulemin South Africa / Hindalco India The profile should have Architectural mini ribs of 1.5mm to provide additional strength at the pan. The material properties shall be as follows: Ultimate Tensile Strength - minimum 200N/Sq.mm, 0.2% proof stress - min 185 N/Sq.mm, Modulus of Elasticity - 70000 N/Sq.mm. The system should be laid to meet the requirements of the building geometry and fixed on Aluminium clip / halter. The fixing halter shall be made of AA-6082 T6, in accordance with BSEN-755 Part-2, with ultimate tensile strngth not less than 340Mpa and elongation not more than 16% when tested according to ASTM B 557:1981. Each aluminium clip should come with a 6mm thick black polyamide thermal barrier pad with minimum tensile strength of 83 Mpa and maximum elongation of 10% in room temperature. The aluminium halters shall be capable of transmitting all reaction forces to the purlin without the aid of any other material, thus resulting in an overall “Self- supporting standing seam roof system”. Roofing system manufacturer shall be certified with ISO Certificate (ISO 9001). Aprooved Make - KALZIP / KINGSPAN. 2. Second Layer - Roxul-Rockwool Insulation of 150 mm thickness x minimum 60Kg/m3 density. Thermal Transmittance (U-value) to be 0.26W/m2.K. Calculation to be submitted in accordance with BS EN ISO 6946. Sound Transmission Class STC value 38±3 dB to achieve as per ASTM E 90-97. Approved Make: ROCKWOOL/ROXUL/ HITECH 3. Third Layer - Scrim reinforced Polyethylene film heavy duty type or double sided aluminium foil vapour control layer 170microns (VCL 170) thick should be laid providing a minimum water vapour resistance of 336MNs/g and water permeability of 0.61g/m2/day. 4. Acoustic Tissue: One layer of Fredenberg Nonwoven Acoustic Tissue to be laid on bottom liner on the perforated area only. 5. Bottom Sheet - Supply & Fixing of Galvalume Steel pre-coated sheet WA200, RMR 1000 or equvivalent bare galvalume profile sheet of 1000-1015 mm effective cover width and 28-35 mm height ribs with subtle square fluting in the five pan at 200-250 mm centre-to-centre. The feed material shall be manufactured out of nominal 0.47mm Total Coated Thickness (TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume/ Galvalume AZ150 (Min. 150 gms/sq.mt total on both sides) Fixed to the purlins with screws. Approved Makes - TATA Bluescope / JINDAL.

Providing and Fixing of in 0.9mm thick Aluminium Flashing (Specification same as Item No. 38 above) maximum width 500 mm. Colour to match to roofing material.

Providing and fixing of Single skin 2 mm Aluminium gutter, GRADE AA 1100 ALLOY with EPDM Expansion joints for every 12m length, aluminum Down take spout dia 150 mm at every 10 m gutter length, & other accessories and welding at joints. The Girth of gutter would be maximum 1200mm. With bare galvalume bottom sheet 0.47 mm thick, Rockwool insulation 150 mm thick & 60 kg/m3 density, vapour control layer - VCL 170, and z-girt galvanised steel 1.5mm thick.

Supply & Installation of CHECKLINE/LATCHWAYS / KINGSPAN /UDYOGI / KARAM FALL ARRESTER SYSTEMS with Topfix Post with patented rubber energy absorber suitable for Standing Seam Roofing sheets and fixed using 4 x aluminium clamps below 4 corners of the base plate. MANUFACTURED BY CHECKMATE LIFTING & SAFETY LTD., U.K. along with 2 nos of removable trolleys for max. 2 users. System to have CE mark and hold EC declaration of conformity. Must comply with BS EN 795 Class A & Class C and BS 7883. The Checkline Topfix posts with patented rubber energy absorber shall be fixed to the base plate made up of stainless steel powder coated along with 8mm diameter, 7x7 stainless steel wire rope. The system shall be configured with intermediate post, end post, corner post, stand alone, cross over post and T-junction post - which are made of stainless steel SS 316. The system shall have a unique load cell to maintain the tension on the Stainless steel wire rope between 40kg to 200kg and allow for thermal movement of the roof structure. The system's end connection to be connected to wire rope using Checkmate Modular Energy Absorber which shall have the ability to control maximum system forces to allow for fixing to different roof thicknesses. All end connection must be swagged on. The distance between two posts should not exceed more than 9 metres. The system length comprising start post to end post including all intermediate posts shall not exceed 200m (for straight line System) and 150 m (in case of bends/corners). Test report of salt sprays testing to 1000 hours with no corrosion shall also be provided. The system allows for multi-purpose brackets which can rotate through 180° and lock into position. The system shall allow for a range of multi-purpose corners, to suit any turn, corner, deviation or incline to suit the roof layout and design. The system shall consist of identity plates fixed to entry/exit post to indicating : Name and Address of the manufacturer, System type, Nos. of users, Test load, Serial Number, Date of installation and Next date of inspection. SYSTEM WARRANTY - 20 Years based on annual inspection by Checkline / KINGSPAN installer. APPROVED MAKES: CHECKLINE/LATCHWAYS/ KINGSPAN /UDYOGI / KARAM

Design, Manufacture, Supply and Installation of STRUCTURAL GLAZING SYSTEM as per design intent and as per approved drawings, preparation of Shop Drawings, Supply, Fabricate, 8mm toughened high performance glass, erect the system at site as per approved shop drawing at all floor levels and for all heights. Designing, providing and fixing frame supporting system, the framing system to support glazing panels, to any shape and profile, smoke seal, flashing, including gaskets, sealents, necessary accessories as part of the system on a contineous framing supported between floors as detailed below and as per the specifications for structural glazing system. Design the framing Jindal 22835 section with 8mm toughened high performance glass as per design, as specified maintaining groove width shall not be more than 10mm both horizontal and verttical. Submission of methodology for the materilas and assembly and the same shall be got approved by the Employer / PMC prior to installation. Protection of the system and materials till handing over to the Employer / PMC, reomval of the unwanted materials, broken glass, screws, bolts, nuts, packing materials, debris etc regularly and keeping the premises neat and clean all the times. Co-ordinate the details of the Structural Glazing cleaning system during the preparation of the shop drawing and incorporate such details in the shop drawing submitted for approval of Employer / PMC. Design pre-assembled aluminium sections, Structurally glazed Panel with contineous framed panels system with spilt mullion to any shape and profiles shall be designes to with stand the design wind pressure as per relevant IS Code, and fixed at horizontally / vertically / sloped / curved position etc as shown in the approved drawings by using aluminium extrusions, Glass, Spacer tape, gasket, sealent etc. as specified. b) The toughened high performance glass shall be fixed as per specifications. Spacer for glazing panel shall be aluminium extruded profile and finished with C25 grade electrolytic color anodic coating as per approved color conforming to IS 1868 and filled with dry desiccant. Primary sealant shall be Poly-isobutylene (PIB) and Secondary seal shall be structural silicon sealant of DC 995 (one part) or DC 789 (two parts) of Dow corning or approved equivalent. c) System Supports : Providing and fixing the supporting system with Brackets / Clamps including fastening straps, nuts, bolts, rivets, washers etc. as per design requirement and as per approved shop drawing. Brackets / Clamps shall be of hot dip galvanized steel and fastening materials shall be Non - magnetic Stainless steel 300 series - 316 grade of Hilti make or approved equivalent. Galvanizing thickness shall be in accordance with IS 2629 and 4759. Providing and fixing serrated plates or serrated washer wherever required as per the system requirement and as shown in the approved shop drawing. Shim thickness beyond 20mm is not permitted. Shims shall be similar material, preferably with aluminium, not more than 20mm thick and if the variation is beyond 20 mm, the bracket shall be designed accordingly with fastener.

Providing and Fixing Mangalore Tile Roofing with class AA Tiles in cement mortar 1:4 on Sloping Slab including necessary scaffolding, curing finishing etc. complete. SSR 2022-23, Item No. 38.33, Sr. No. 1173, Page No. 236, Bd. R3A, Page No. 449.

Providing and fixing Mangalore tile ridge and hip tiles of class 'AA' including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. SSR 2022-23, Item No. 38.03, sr. No. 1143, Page No. 233, Bd. R3, Page No. 450.

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. SSR 202-23, Item No. 27.12, Sr. No. 899, Page No.198, As director by engineer in charge and BDG- 2 and 5

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. GROUND FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FIRST FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. SECOND FLOOR

Providing Coursed Rubble Masonry First Sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in Superstructure including racking out joints inside when plastering is to be done, watering and scaffolding etc. complete. SSR 2022-23 Item No. 28.12, Sr. No. 915, Page No. 200, BdH 14 Page No.333. GROUND FLOOR

Providing Coursed Rubble Stone Masonry for Double side facing Dome shaped Stone Arch Pillar, having (Approximate size 0.75m x 0.30m x 0.90m) having 100mm x 100mm square shaped hole with fine edges in center of the pilar and 300mm above the bottom with dome shaped well finished surface at the top in cement mortar 1:6 in superstructure, including double cuplock scaffolding, curring and finishing the joints etc. comlete. As directed by Engineer-in-Charge.

Providing Ashlar Masonry with Soft Compacted Basalt stone. First Sort like walls, columns, cap stones etc. with dressing as per drawing and as directed by Engineer-In-Charge, in cement mortar 1:4 with fitting joints (paper), setting with stainless steel dowels, pins and fixing with Araldite and hardner etc. including transportation and conveyance to specific required location, scaffolding, tools and tackels, racking the joints with neat cement slurry, curing cleaning etc complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulded stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing and fixing Jodhpur Pink Sand Stone of approved quality vein and colour for Cladding of 175mm thickness. As per drawings approved by Consultant / Engineer-In-Charge, including cutting, dressing, macine / hand polish to surface, embossing, carving, grooving, mural work, statues of Gods etc, installation and grinding, scaffolding, hoisting, erecting, fixing by mechanical jointing alongwith approved adhesive, cement slurry and making level surface by cement mortar 1:4 before fixing, transportation of all required materials up to the site of work, approved waterproofing treatment, fillingb of joints, cleaning, applying Anti-Moss treatment on surfaces of stone with specified chemical approved by Consultant / Engineer-In-Charge, including all material, labour, lead and lioft etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,BDJ- As directed by Engineer in charge. GROUND FLOOR

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,,BDJ- As directed by Engineer in charge. FIRST FLOOR

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for Terrace Waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. SSR 2022-23, Item no. 31.10, Sr.No.946, Page No. 206, BDJ- As directed by Engineer in charge. GROUND FLOOR

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for Terrace Waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. SSR 2022-23, Item no. 31.10, Sr.No.946, Page No. 206, BDJ- As directed by Engineer in charge. SECOND FLOOR

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing for basement or underground floor on a base of cemenrt concrete 1:3:6, including sub base of 2.50 centemeter thick cement mortar 1:3 with conceal secrete (RMW), Algae proof or other alike waterproofing liquids, racking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing and cleaning with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.12, Sr. No.948, Page No. 206, BdJ 2 Page No.355.

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing treatment to Vertical outside faces of reinforced cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with waterproofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with cement concrete 1:2:4 mixed with waterproofing liquid, curing with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.13, Sr. No.949, Page No.207, BdJ 2 Page No. 355.

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. GROUND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FIRST FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. SECOND FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. GROUND FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. FIRST FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, Asdirected by Engineer-In-Charge. SECOND FLOOR

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 2022-23, Item No. 32.32, Sr.No. 983, Page No. 211, As directed by Engineer-In-Charge.

Providing and Laying in-situ Cement Concrete M30 with Tremix Treatment for Flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. SSR 2022-23, Item No. 33.31, Sr.No.1018, Page No.216, As directed by Engineer-In-Charge.

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. GROUND FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. FIRST FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. GROUND FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. FIRST FLOOR

Providing and laying Vitrified Rustic Matt Stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.44, Sr.No. 1031, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Rustic Matt Stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.44, Sr.No. 1031, Page No.217, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying Vitrified Rustic Matt Stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.45, Sr.No. 1032, Page No.218, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Rustic Matt Stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.45, Sr.No. 1032, Page No.218, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying matt finish Ceramic Tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.

Providing and laying Ceramic Tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing soft compacted basalt stone of size 300mm x 450mm x 100mm thick for Paving/Flooring with dressing as per drawing and as directed by Engineer-In-charge. The stones to be finely flat, chisel dressed on the surface, without windings, and the joints running true and parallel from side to side. The stones to be laid with joints not exceeding 3mm thick and and to be evenly and firmly bedded flush in mortar on the existing concrete, and no hollows left. Courses to be parallel and at reight angles to the wall, and the stone shall be laid with break joint at least 150mm or as directed by Engineer-In-Charge, including cement mortar bed of 20mm thickess in cement mortar 1:4 with filling joints, curing, cleaning, etc. complete. etc. complete. As directed by Engineer-In-Charge. (The sample of the moulded Paving stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing and fixing Rolling Shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) SSR 2022-23, Item No. 39.25, Sr. No. 1218, Page No. 249, Bd.T-55, Page No. 510.

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm X 57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Single leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with provision for louvers inbuilt as per drawing / with vision panel to be provided with 6mm glass, beeding and screws from inside. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening .All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour, etc complete. As directed by Engineer-In-Charge.

Providing and fixing steel frame for door of size 6.0m wide x 6.83m ht two leaf openable Door fabricated and made out of MS steel box section of rectangular hollow section (RHS) of size 200mm x 100mm x 4.00mm thk. For main door shutter frame work as per drawing with MS Box section of square of hollow section (SHS) of size 100mm x 100mm x 4mm thk for cross Member of shutter frame with top and bottom heavy duty pivot hinges welded to main door shutter frame as per Drawing and door shutter cladded with Burma Teakwood planks of size 200mm x 25mm thick placing in vertical direction from top to bottom and placing side by side from both side of shutter and with 25mm teakwood plank on all remaining edges of the bot shutters and separate Burma Teakwood Members of size 250mm x 75mm fixing on front side of each shutter as per detail elevation Drawing including same size cureved member as per elevation matching with stone arch of civil construction and fixing decorative iron door nobs as per design on the elevation frame ae well as the door shutter central top portion of smaller size door nobs and spikes fixed on MS steel plate fixed to main door shutter of size 150mm wide x 5mm thick horizontally only on front side of both door shutters. Fabrication of main shutter frame is to be fabricated with RHS profile cutting and right angle joint to be fabricated with 45° angle cutting and welding all members without any opening exposing inner surface of box Member. Including melamine polishing all wooden surfaces. Item including all materials, labour, transportation, scaffolding, Erection, with all necessary tools on with all leads and lifts etc. Complete. Item Code-DFD1-

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537.

Providing and Fixing Railing of Cast Iron Balustrade (0.30m wide x 0.80m in height) using wooden handrails as per drawing and design suitable to the Historic Structure, using atleast 10kg per Balustrade with First Sort Burma Teak Wood Hand Rails to be carved in minimum 80mm x 80mm section to be fixed at the location using necessary joinery, inclusive of French Polish application to wooden hand rails, etc. all complete. As directed by Engineer-In-Charge.

Providing and applying two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 2022-23, Item No. 35.24, Sr. No. 1093, Page No.225, As directyed by Engineer-In-Charge.

Providing and Laying Self Levelling Epoxy coat minimum 1mm thick of approve quality, make and shade, on previously done Tremix flooring, including preparation of surface, primer coat, base coat etc. complete. As directed by Engineer In-Charge.

Providing and Applying PU Paint Strips 25mm wide of approved quality, make and shade as per drawing and as required on previously done Self Levelling Epoxy coat, including preparation of surface, primer coat, etc. complete. As directed by Engineer-In-Charge.

Providing Ashlar Masonry for Mural Moulding with Soft Compacted Basalt stone from approved source from Rajasthan, with dressing as per drawing and as directed by Engineer-In-Charge in Cement Mortar 1:4 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat cement slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing Ashlar Masonry for Moulding at various Levels with Soft Compacted Basalt stone from approved source form Rajasthan, with dressing as per drawing and as directed by Engineer-In-Charge in Cement Mortar 1:4 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat cement slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing Ashlar Masonry for Mahirap Arch Moulding with Soft Compacted Basalt stone from approved source from Rajasthan, with dressing as per drawing and as directed by Engineer-In-Charge in Cement Mortar 1:4 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat cement slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing and fixing soft compacted basalt stone of size 600L x470 D x 300 Hmm size from approved sourcw, for Carved Flower design (750mm x 750mm) at 6.85 m level embeded in Ashlar masonry, with dressing as directed by engineer in charge in cement mortar 1:4 with fitting joints ( paper) including transportation and conveyance to specific required location, scaffolding, tools tackels racking the joints with neat cement slurry, curing cleaning varnishing etc complete. (The sample of the Mural stone shall be approved prior to execution by Consultant/Engineer-In-Charge.) As directed by Engineer-In-Charge.

PRECAST CONCRETE / GFRC Designing, Manufacturing as per drawing, Supplying and Installing in position, Precast Concrete Ghumti for Compound Wall with smooth finish. Specifications : Precast concrete with compressive strength 80 MPA and HDG exposed fixing cleats and fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent, Inserts if embedded in GFRC / Precast concrete would be SS 316 plated. Dimension - 0.90m x 0.90m x 1.725m

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of TOWER 360 Ride the high rise (60m) tower, asthetically and ergonomically designed air conditioned cabin with full length window in clear acrylic or safety glass at the front of the cabin. The cabin shall be suitable for seating capacity of 48 persons per cycle capacity. The cabin shall rotate while its ascent and descent to become a nice picture taking gallery. The Tower ride shall give a bird view of the Amusement Park and beautiful surroundings. The detailed Technical specifications are as below. 1. Ride Height - 60 Meters, 2. Ride Capacity - 48 persons per cycle, 3. No. of Cabins - 1 No., 4. Travelling height of Cabin - 50 Meters, 5. Travelling speed of Cabin - 6-10 Meters per minute, 7. Number of turns of cabin - 1 - 1.5 RPM. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Tower 360 Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of 17 Meter / 360 Loop STAR SHIP RIDE with Ship dimensions 9.20m x 2.0m x 2.8m and passenger capacity of 40 persons. The detailed Technical Specifications are as below. 1. Structure Height - 9.0m - 17.0m, 2. Time Cycle - 3.0 minutes, 3. Drive Mechanism - Friction Drive, 4. Maximum Swing Andle - 360 degrees, 5. Handle Locking System -Mechanical Sure Lock with Seat Belt. 6. Pillar's Illumination - Decorative Bulb / Shades of high reflection on front two pillars, 7. Loading and Unloading Platform - Full size platform. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Star Ship Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of TELECOMBAT / SUPERJET Ride, with 40 Adults capacityThe Super Jet Planes shall move in a circular motion on a central axis arm. The Jet Planes shall suddenly ascend and descend thus making the riders feel as though they are soaring through the air. The Up and Down movement of arm shall be generated by pneumatic system and center up lift motion by hydraulic system. The Technical Specifications are as below. 1. Number of Gondolas - 20 Numbers, 2. Loading - Simultaneous, 3. Speed / RPM - Stage 5 RPM, Rotation - Clockwise, 4. Drive Mechanism - Electric Motor for Rotation, Pneumatic cylinder for arms and Hydraulic for Centre uplifting. 5. Size of Ride - 16.0m dia. 6. Time Cycle - 2 minutes. 7. Loading Unloading time - 1 minute. 8. Capacity of Ride - 40 Adults. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Telecombat / Superjet Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of THEMED SWING CHAIR FAMILY RIDE with 24 persons seating capacity. The Technical Specifications are as below. 1. Overall height - 5.0m. 2. Number of Chairs - 24. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Themed Swing Chair Family Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of BREAK DANCE HYDRAULIC RIDE FOR TEENAGERS The ride shall have 4 groups of 4 two seater cars for a total capacity of 32 adults. The Technical Specifications are as below. 1. Ride Height - 5.0m. 2. Speed (Main Platform) - 6 RPM (Max). Small discs (4numbers) - 14 RPM. 3. Seating Capacity - 32 Adults. 4. Ride duration 120 seconds (variable). 5. Drive Type - Friction Drive. 6. Electrical Panel - Complete panel with Volt and Amp meter, Safety lock and Emergency switch. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Break Dance Hydraulic Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of ZYCLONE / WILD COASTER 9.0M RIDE - Wild Coaster - The coach soars up the crest in to the blue sky, then slowly rounds the top giving the passenger a moment to freeze before plunning down a steep drop and gaining back its height before blink of an eye and again to make them recall goes for a small drop and then rolls for two circles and enters back its platform dashingly, causing passengers to well and screem to their hearts content. The Technical Specifications are as below. 1. Track Length - 210.0 Meters. 2. Track Height - 8.0 Meters. 3. Number of Coach - 3 Numbers. 4. Seating Capacity - 12 Adults. 5. Ride Time - 40 Seconds. 6. Loading Unloading - 50 Seconds. 7. Drive Type - Chain Pickup / Gravitational. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Wild Coaster Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of POLIPO / OCTOPUS RIDE - The Polipo / Octopus ride has a column which rotates at a high speed and the arms attached to it moves up and down with the crafts hung at the end of each arm. The bodis cross each other ss they go in full circle. The Technical Specifications are as below. 1. Diameter of Rode - 18.0m. 2. Number of Crafts - 12 Numbers. 3. Seating Capacity - 24 Adults. 4. Ride Time - 120 seconds. 5. Loading Unloading - 8 persons at a time. 6. Loading Unloading time - 90 seconds. 7. Motions - a) Clockwise Rotation of all 3 arms (gear drive) b) Ascentic Rotation Anti movement (gear drive) c) Craft Rotation - Free spin. 8. Main Base frame - 6.50m diameter. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Octopus Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of TSUNAMI / WAVE SWINGER RIDE This ride has the seating arrangement for 18 adults and main movement id through the center axis of two vertical columns at the height of 5.0m. This giving the ride a height of 9.0m when it is in the top, the ride is fully automatic with manual over rides. The PLC of the ride is programmed that it makes the ride move in various locations like 0 degrees, 180 degrees, 270 degrees etc which are sensed through proximity switches and as the craft of the ride has its own axis it gives a good swing tothe craft when it is moving or even when it is stopped. The Technical Specifications are as below. 1. Ride Height - 12.0m 2. Seating Capacity - 22 Adults. 3. Number of Coach - 1 Number. 4. Drive Type - Gear Drive. 5. Ride Duration - 3.0 minutes. 6. Safety Bar - Shoulder locking PU Coated. 7. Panel - Fully Automatic (PLC System) with VFD. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Wave Swinger Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of FRISBEE RIDE Frisbee is a type of Pendulum shaped amusement ride featuring a circular gondola that rotates as it swings back and forth. Riders are seated on the gondola facing inward or outward. The Technical specifications are as below. 1. Ride Height - 12.0 meter. 2. Seating Capacity - 22 Adults. 3. Speed Rotating - 6-8 RPM. 4. Maximum swing - 80 degrees either side. 5. Drive Mechanism - Gear Drive - Rotation Frictio drive, Swing. 6. Panel - Semi-Fullu Automatic. 7. Locking Mechanism - Shoulder Bar / Mechanical lock. 8. Platform - Folding (Pneumatic). The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Frisbee Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of set of 10 STRIKING CARS with capacity of two adults per car, DC Motor of 80 Volt D.C. (0.75kW), Rear and Front Lights, PU Moulded Seats and Head set with PU Foam, Fiber Glass body and Chasis with extra strength, PU Paint on all models, Pneumatic Bumper Tyre, Antena Pick-Up, Safety Belts etc. Total weight about 220Kg per Car. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Striking cars.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MONO TRAIN with Total Track Length of 2500 Meters at the height of 3.0 metre, Six Trains with the capacity of 20 persons each train, with total capacity of 120 persons. The height of carriage shall be 1.45 meters and the width of carriage shall be 1250mm. Maximum Speed of train shall be 4.0 Km/Hr. The coaches shall be Cater Pillar / Dragon / Spped Train. The manufacturer shall provide the structural design for execution of the required civil works for track installation and station buildings. The required civil work will be provided separately. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Mono Train.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MUSIC BOB Family Ride which shall be a fast rotation ride with tastefully decorated fiber glass seating arrangement, with clockwise circular motion at high speed. Diameter of ride shall be 16.0 meters, Capacity - 40 Adults. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Music Bob Family Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Instaling, Testing and Commissioning of OUTDOOR MAZE. The Open Roof Outdoor Maze Attraction shall be of the area of 500 Sq.Ft. The attaction shall be of Multi-Level design to add excitement and complexity to the Maze. The Multiple exciting and challenging clues shall be strategically placed throuhout the maze to engage the participants. The Maze shall be equipped with a reliable communication system to assist participants in casd of any issues or emergencies. The Lighting shall be installed strategically to facilitate night time activities, ensuring a safe and enjoyable experience even after dark. The Multi-Level design shall incorporate Ramps, Stairs and Pathways that are accessible to all the participants, ensuring an inclusive experience for everyone. The Construction shall ensure adherence to design specifications and seamless integration with the surrounding environment. The Maze shall be designed with Safety a a Top Priority. The clear and visible signages shall be placed at key points to guide the participants and ensure their safety. Emergency Exits shall be strtegically locared and easily accessible. The Maze shall be constructed with with High Quality and Weather Resistant materials taht are safe for outdoor use and able to withstand various weather conditions and to ensure Durability and Lonevity. The agency shall provide comprehensive Training to the Employer's staff on how to manage and observe the Maze's operaton safety and efficiency.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of CRAZY SPIN RIDE/ZERO GRAVITY of 6.50 meter diameter, with seating capacity of 16-18 persons. The ride time shall be 90 - 120 seconds. The ride RPM shall be 28 - 30 RPM. The panel shall be Semi / Fully Automatic. The CCTV camera shall be of 1.2 Mega Pixel with HDR Cat-eye. The Audio system 4.1 Digital Sound / Poly digital shall be provided to play ambient sounds as well as sound effects that will add to the atmosphere and lighting system taht will create a variety of effects. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Crazy Spin Ride. The Crazy Spin Ride shall be tested and certified by a qualified testing laboratory. The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of CAROUSAL FAMILY RIDE with diameter of 10.0 meters and finely decorated 18 horses for a total capacity of 18 adults, the central structure and the roof perimeter shall be covered with painted panels and lights. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Carousal Family Ride.The manufacturer shall provide the structural design for the required foundations and related activities, the required civil work will be provided separately.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MINI FLIGHT. The mini flight shall be with 8 arms and the cars shall be as per the choice of the Engineer-In-Charge. All the arms shall be lifted up and down at the same time. The ride shall be decorated with Lights and beautiful decoration. The ride capacity shall be of 32 children of age group upto 10 years. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Mini Flight Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of SUN 'N' MOON RIDE. The ride height shall be 5.70 meters. The ride capacity shall be of 24 children of age group below 10 years. The drive shall be friction tyre. The numer of gondolas shall be 6 number of gondolas. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Sun N Moon Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of JUMPING FROG. The fun ride for the family shall be in the shape of a Frog and the riders shall enjoy the simulation as if riding piggy back on a real jumping frog. The seating capacity shall be of 16 persons. The numbe rof coaches shall be four. The drive shall be tyre (Front and rear coach). The ride time shall be 120 - 180 seconds. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Jumping Frog Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MINI CRAZY CUPS. The Crazy cup ride shall have flower / tea cup shape fibre glass seating arrangement. The mail platform of the ride shall move clockwise, and the cups on the smaller platfrom in turn shall rotate in anticlockwise direction giving a feeling that the cups have gone crazy. No.of FRP Cups - 4 nos. The seating capacity shall be 24. The ride time shall be 60 seconds. The floor shall be of aluminium chequered plate 16 gauge covered with FRP panels. The drive system shall be by tyre friction. The cups and saucers shall be pigmented of minimum three layers. The manufacturer shall provied Electric panel with Volt and Amp meter, safety lock and emergency switch. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Mini Crazy Cups Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of FLYING CAROUSAL CHLDREN RIDE. The cetral structure and the roof perimeter shall be covered with painted panels and lights also shall be provided. The carousal shall consist of 4 ducks and 2 helicopters for a total capacity of 18 children of age group upto 10 years. The Civil drawings shall be provided by the manufacturer. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Flying Carousal Children Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MINI SWING CHAIR FAMILY RIDE. The mini swing chai family ride shall incorporate all the excitement of a large swinger. The ride shall accomdate 12 children for an hourly capacity of 144kids/hr. The overall hright shall be 4.0 meters. No. of chairs - 12. Time cycle shall be of 5 minutes. The Civil drawings shall be provided by the manufacturer. The Ride shall be designed and installed in accordance with all the latest applicable safety standards. The Ride shall have clear signages and warnings to inform participants of any potential hazards. The Ride shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Mini Swing Chair Family Ride.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of CAVE ADVENTURE. The Indoor attraction shall be of the area of 4000 Sq.Ft. created with Concrete, Steel and Wood, with Sound, Light and Fog effects to add to the atmosphere to create variety of effects including shadows, highlights and fog etc.. For water features, required Pumps, Filtrs, storage tank etc shall be provided. The artificial asthetic components likr Rocks, Plants and other decorative items shall be provided. The essential signages and warnings to inform participants shall be provided. The adequate safty equipments like, Harnesses, Helmets and Ropes etc shall be provided. The Cavd Adventure Attraction shall be equipped with Go Pro and Surveillance camera to record the experience of participants to watch later. The Cave Adventure shall be designed and installed in accordance with the latest applicable safety standards. The manufacturer shall provide training to the employer staff on how to operate and maintain the Cave Adventure.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of UPSIDE - DOWN HOUSE. The Double Story Villa Indoor Attraction shall be of the area of 3000 Sq.Ft. with features of Anti-gravity fountain, Interiors, Lighting, Photography, Sound. The house shall be designed and installed i accordance with the latest applicable safety standards and shall be covered by a one year warranty. The House shall be made of high quality materials including Steel, Concrete, Wood and Glass etc. The Interiors of the house shall be made of variety of material like Wood, Fabric, Paint etc. to cretae comfortable and inviting space. The lighting shall be designed to create a dramatic and atmospheric effect, with a variety of different lighting schemes to choose from. The house shall be erquipped with an anti-gravity water fountain that shall create a visually stunning and immersive experience to the visitors. The photography and sound system shall be state-of-the-art providing visitors with opportunity to capture and share their unique experiences.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of VORTEX TUNNEL. The 19 feet long Vortex Tunnel shall be made of 5 high-grade steel rings lined with Flame retardent fabric, 9 feet in diameter, with see through flooring. The 36 inch wide brdge, 20 feet in length with handrails. Required Light Fixture and Lamps shall be provided as per approved design. The Vortex Tunnel shall be designed and installed in accordance with the latest applicable safety standards. The Vortex Tunnel shall be made of high-quality materilas, including Aluminium, Steel ans Synthetic materials. The Vortex Tunnel shall be equipped with a Sound system that shall play ambient sounds as well as sound effects that shall add to the atmosphere and a lighting system to cretae a varity of effects. The Vortex Tunnel shall have clear signages and warnings to inform participants of any potential hazards. The Vortex Tunnel shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Vortex Tunnel.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of ROPE COURSE. The Rope Course attraction shall be of the area of about 3000 Sq.Ft. The Rope Course shall be designed with multiple difficulty levels to accommodate participants of varying abilities and ages. The Rope Course shall be constructed using sturdy and high quality materials to ensure safety and durability. The Rope Course shall feature attractive and vibrant colors to cretae visually appealing and exciting environment for the participants. The Rope Course shall boast novelty and uniqueness in its design, featuring a variety of thrilling and creatively designed sets.The Rope course with varying difficulty levels shall cater to the adventurous spirit of both young and adult participants. The Rope Course shall be built with the utmost focus on safety, with rigorous testing and adherence to safety standards. The agency shall oversee the construction to ensure structural integrity and stability.The safety harnesses and equipment shall be provided. The Rope Course shall have clear signages and warnings to inform participants of any potential hazards. The Rope Course shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Rope Course.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of NINJA COURSE. The Rope Course attraction shall be of the area of about 1500 Sq.Ft. The Ninja Course shall incorporate a variety of obstacles like Rope swings, Climbing walls, balance beams etc. The Ninja Course shall be designed with a moderate level of difficulty, suitable for intended participants aged 10 to 50 years, with varying skill levels. The Ninja Course shall feature unique sets inspired by international references, creating an immersive and thrilling experience for the participants. The course shall have a captivating dark theme, incorporating elements that evoke a sense of adventure and challenge. The Ninja Course shall be built with the utmost focus on safety, with rigorous testing and adherence to the international safety standards for obstacle course attractions. The agency shall oversee the construction to ensure structural integrity and stability.The safety harnesses and equipment shall be provided. The Course shall have clear signages and warnings to inform participants of any potential hazards. The Ninja Course shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Rope Course.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of MELTDOWN ATTRACTION. The Meltdown attarction shall be of the area of about 1200 Sq.Ft. The Meltdown attraction design shall be such as to promise an exhilarating and unforgettable experience for the participants, with its high response time, variable speed and powerful engine. The Meltdown attraction's motor shall be encased in a proper stand, making it weatherproof and suitable for both Indoor and Outdoor usage without compromising performance. The attraction shall be equipped with a powerful engine of 2 HP. The attraction shall be designed in such a way to have low maintenance requirements and ensure smooth and reliable operation over time. The supply shall include an inflatable kit, cleaning kit, cover, repair kit and medical kit. The attraction shall have an ultr-high response time, providing quick and precise movements for an immersive experience. The attraction shall have clear signages and warnings to inform participants of any potential hazards. The attraction shall be covered by a One year Waranty to cover all defects in materials and workmabship. The supplier shall provide Training to the Employer's staff on how to operate and maintain the Meltdown attraction.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of FUN WALL CLIMBING. The Fun wall shall have 6 individual sets of climbing walls for diverse and engaging climbing experience, equipped with the harness, helmet and internationally acclaimed auto belay system. The Fun wall set shall feature a variety of climbing walls offering different levels of difficulty and challenges for climbers. The Climbing walls designed in such a way to provide Fun and enjoyable experience to the participants of all ages and skill levels. The Fun wall shall be designed considering the safetyas the top most priority with sturdy and secured structures for climber's safety. The climbing holds and grips shall be strategically placed to ensure a safe and comfortable climbing experience. The Fun wall set shall boast an attractive and visually qppealing design, making it an eye catching attraction to the proposed Indoor Kids Adventure Park.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of ZIP CYCLE. The ZIP-CYCLE shall be a fun combination of bikes and zip-lines that allow the participant to cycle in the air admiring the beauty of the kids adventure park. The ZIP-CYCLE shall be made of metallic steel structure, Galvanised steel wire rope (USHA MARTIN), Tiger U-clamp, Thimble, Turn buckle, Mag wheel sports cycle, 360 rotating system, Mitton pair, Seat belt, Helmet, Pulley, Carbineer, Lanyard etc. The ZIP-CYCLE shall be designed with a moderate level of difficulty, suitable for intended participants aged 10 to 50 years, with varying skill levels.The ZIP-CYCLE shall boast an attractive and visually qppealing design, making it an eye catching attraction to the proposed Indoor Kids Adventure Park. The supplier shall provide Training to the Employer's staff on how to operate and maintain the ZIP-CYCLE attraction.

Designing, Manufacturing, Transporting, Installing Testing and Commissioning of 360 degree FLYING CYCLE. The 360 flying cycle shall be an unpowered rotating device that allows passengers to spin in a circle with a bicycle. The classic round shape shall stimulate curiosity and the fixed and firm frame formation shall ensure the safety to the user. The device shall help the passenger to exercise while offering a perfect source of entertainment. The 360 degree Flying Cycle device shall be made of powder coated Metallic Steel Structure, Alloy Wheel Sports Cycle, High tension nut biolts, Specially modified harness, Helmet etc. The supplier shall provide Training to the Employer's staff on how to operate and maintain the 360 degree FLYING CYCLE attraction.

Excavation for Roadway in Earth, Soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23 Item No. 2.11, Sr.No.87, Page No.23, MORTH 301.

Excavation for Roadway in Hard Murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23 Item No. 2.13, Sr.No. 88, Page No. 24, MORTH 301.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of over 50 m to 300 m. inclusive from the site of excavation to the site of deposition as directed. SSR 2022-23 Item No. 2.25, Sr. No. 99, page No. 24, MORTH 305.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of over 300 m to 500 m. inclusive from the site of excavation to the site of deposition as directed. SSR 2022-23 Item No. 2.26, Sr. No. 99, Page No. 25, MORTH 305.

Providing earth work in Embankment with approved materials obtained from other sources, including all lead and lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources). SSR 2022-23 Item No. 2.28, Sr. No. 101, Page No. 25, MORTH 305.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. SSR 2022-23, Item No. 3.11, Page No.28, Sr.No. 124, MORTH 202.

Providing Hard Murum side shoulder including supplying hard murum at the road site, including spreading and compacting for sidewidth layers on each side with power roller including artificial watering etc complete. SSR 2022-2023 Item No. 2.29AA

Construction of granular sub-base by Plant Mix Method by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401. Plant Mix Method and Grading II Material. SSR 2022-23 Item No. 3.02, Sr.No. 114, Page No. 27, MORTH-401.

Wet Mix Macadam - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. SSR 2022-23, Item No. 3.23, Sr.No.133, Page No.30, MORTH-406.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395:1997 below concrete pavement including all materials and labour complete. SSR 2022-23, Item No. 5.19, Sr. No. 187, Page No.44, MORTH-602.5

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in- charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. SSR 2022-23, Item No.5.13, Sr.No.181, Page No.43, MORTH 601.

Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary )

Providing and laying Concrete Pipe of I.S.NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. SSR 2022-23, Item No. 42.09, Sr.No. 1380, Page No.274, Bd.V, Page No. 573.

Providing and laying cement Concrete Pipe of I.S. 458:2003 Non Pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.08, Sr. No. 384, Page No.81, CD 7, Page No. 162.

Providing and laying in situ/ ready mix M-20 RCC of trap metal for RCC work of ballast walls and Kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete, excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.) SSR 2022-23, Item No. 14.44 a, Sr. No. 476, Page No.96, BR 50, Page No. 143 and B7, Page No.38.

Providing and laying Cement Concrete Pipe of I.S. 458:2003 Non Pressure-3 class of 600 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.14, Sr. No.390, Page No. 82, CD 7, Page no.162.

Providing and laying Cement Concrete Pipe of I.S. 458:2003 Non Pressure-3 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.16, Sr. No.392, Page No. 82, CD 7, Page No. 162.

Providing and laying cement concrete pipe of I.S. 458:2003 Non Pressure-3 class of 1200 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR-2022-23, Item No. 11.18, Sr. No.394, Page No.82, CD-7 Page No.162.

Providing and laying in situ/ ready mix M-20 controlled reinforced cement concrete of trap metal for Raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete, RCC Grade with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. with fine agreegates of required specifications (VSI sand finely washed etc.) SSR 2022-23, Item No. 17.32, Sr. No. 620, Page No. 131, MORT&H (5th Rev.) 1700,2304.

Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). SSR 2022-23, Item No. 26.17, Sr. No. 860, Page No. 185, Bd F-11, Page No. 304 and B7, Page No. 38.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete. SSR-2022-23, Item No. 6.12 a, Sr.No.215, PageNo. 48, MORTH-803.4.

Transportation of debris / surplus excavated material including loading, unloading transportation for a lead of 3.00 km inclusive from the site of excavation to the site of deposition as directed by Engineer-In-Charge.

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast interlocking cement concrete paving blocks 100mm thick in M-50 grade of approved size and shape for city streets and roads with high volume / heavy traffic as specified and as per IS15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over bed of natural / crushed sand of 50mm thickness including necessary excavation in all strata, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete. SSR 2022-23,Item No. 5.21, Sr. No. 189, Page No. 44, IRC-SP-63.

Detailed Thematic designing, planning, fabricating, providing and fixing Fibre Reinforced Polymer (FRP) 29 STATES MURALS/THEMING of size approximately 6.0m x 5.0m and 12.0m x 9.0m (size may vary) each, 6mm thick FRP and Art work depth up to 100mm relief work, as per design and drawing approved by the concerned authority. The Murals shall be created with Fibre Reinforced Polymer (FRP), including Clay mould, Composite Synthetic polymers and glass wool shall be used in three layers for casting moulds and dyes for production with spray treatment of COT 100. The internal fabrication work shall be done with MS components as per design requirements with anti rust coating (SMAC RCCP - 120) in two layers. The entire art work, once installed, shall be painted with combination of branded water based exterior emulsion and oil based Automotive colors. The work shall be including all labour, material, all leads, lifts with transportation, loading, unloading, necessary scaffolding etc. complete. To be executed as directed by Engineer-In-Charge. Mode of Measyrements - The multiplying factor of 1.3 will be applied for calculating the average surface area of the proposed Murals.

Detailed Thematic designing, planning, fabricating, providing and fixing Fibre Reinforced Polymer (FRP) 52 SHAKTIPEETH MURALS of size 3.0m x 3.0m (size may vary) each, 6mm thick FRP and Art work depth up to 150mm relief work, as per design and drawing approved by the concerned authority. The Murals shall be created with Fibre Reinforced Polymer (FRP), including Clay mould, Composite Synthetic polymers and glass wool shall be used in three layers for casting moulds and dyes for production with spray treatment of COT 100. The internal fabrication work shall be done with MS components as per design requirements with anti rust coating (SMAC RCCP - 120) in two layers. The entire art work, once installed, shall be painted with combination of branded water based exterior emulsion and oil based Automotive colors. The work shall be including all labour, material, all leads, lifts with transportation, loading, unloading, necessary scaffolding etc. complete. To be executed as directed by Engineer-In-Charge. Mode of measurement - The multiplying factor of 1.4 will be applied for calculating the average surface area of the proposed Murals.

Detailed Thematic Designing, planning, fabricating, erecting, and installing, and handing over of the Chhatrapati Shivaji Maharaj Statue (40 Feet height) as per approved design, drawing & dimensions. The 1:1 scale mockup shall be prepared, and shall be approved by all the concerned. The statue shall be created with minimum 12mm thick Fiber Glass casting. The required fabrication for internal framing work shall be done in MS Structure as per design with anti rust coatings (SMAC RCCP - 120) in two layers. The Internal structure shall be anchored with the existing platform. The entire art work once installed shall have metal coating of 180GSM and Colouring & Finishing in metallic monotonous paint bronze texture with all weather coating as final finish. including all labour, Material, all leads and lifts, with Transportation, including all necessary Scaffolding etc, complete. To be executed as directed by Engineer in Charge.

Detailed Thematic Designing, planning, fabricating, erecting, and installing, and handing over of the Aai Tulja Bhavani and Chhatrapati Shivaji Maharaj Statue (40 Feet height) as per approved design, drawing & dimensions. The 1:1 scale mockup shall be prepared, and shall be approved by all the concerned. The statue shall be created with minimum 12mm thick Fiber Glass casting. The required fabrication for internal framing work shall be done in MS Structure as per design with anti rust coatings (SMAC RCCP - 120) in two layers. The Internal structure shall be anchored with the existing platform. The entire art work once installed shall have metal coating of 180GSM and Colouring & Finishing in metallic monotonous paint bronze texture with all weather coating as final finish. including all labour, Material, all leads and lifts, with Transportation, including all necessary Scaffolding etc, complete. To be executed as directed by Engineer in Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Brachiosaurus Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Neck left-right. 5. Neck - uup-down. 6. Breath. 7. Tail move. 8. Sound. Spine L=13.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Tyranosaurus Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Neck left-right. 5. Neck - uup-down. 6. Breath. 7. Tail move. 8. Sound. Spine L=10.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Dilophosaurus Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Neck left-right. 5. Fins - move. 6. Breath. 7. Two claws move. 8. Tail move,. 9.. Sound. Spine L=7.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Ankylosaurus Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Head left-right. 5. Two claws move. 6. Tail move,. 7.. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Monoclonius Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Head left-right. 5. Neck - up down. 6. Breath 7. Tail move,. 8.. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Baryonyx Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Head left-right. 5. Neck - left right. 6. Two claws move 7. Tail move,. 8.. Sound. Spine L=7.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of T-rex eating small Triceratops Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Head left-right. 5. Neck - up down. 6. Breath 7. Two claws move,. 8..Tail move. 9. Sound Baby Triceratops : static. T-rex Spine L=7.00M. Baby Triceratops Spine L = 1.50M H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Pterosaurus Dinosaur with details as below. 1, Eyes blink. 2. Mouth open - close. 3. Head up-down. 4. Head left-right. 5. Breath. 6. Tail move,. 7.. Sound. Dioo babySpine L=1.00 - 1.20M. Eing span =3.0m, Trunc height = 0.6m etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Stegosaurus Dinosaur with details as below. 1. Mouth open - close. 2. Head up-down. 3. Head left-right. 4. Breath. 5. Tail move,. 6.. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Parasaurolophus Dinosaur with details as below. 1. Eyes Blink. 2. Mouth open - close. 3. Head left-right. 4. Neck up down. 5. Two claws open,. 6. Breath. 7. Tail move. 8. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of T rex head Dinosaur with details as below. 1. Eyes Blink. 2. Mouth open - close. 3. Head left-right. 4. Neck up down. 5. spray water,. 6. Sound. Spine L=1.50M. Head go forward about 0.6-0.8m and go back. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of New born Protoceratops (Dino Egg) with details as below. 1. Mouth open - close. 2. Head left-right. 3.Shell open close. 4. Sound.. H = 1.20m etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Velociraptor Strike Glass Dinosaur with details as below. 1. Mouth open - close. 2. Head to left and strike the glasses. 3. Front claws move. 4. Tail sway. 5. Sound. L=3.00M. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Apatosaurus Dinosaur with details as below. 1. Mouth open - close. 2. Head up down. 3. Head left-right. 4. Neck up down. 5. Breath. 6. Tail sway. 7. Sound. Spine L=18.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Coelophysis Dinosaur with details as below. 1. Mouth open - close. 2. Head Turn. 3. Body - upp down. 4. Tail sway. 5. Sound. Spine L=3.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Ouranosuruss Dinosaur with details as below. 1.Eys blink. 2. Mouth chew. 3. Head up down. 4. head - right left. 5. Claws move. 6. Body - up down. 7. Tail sway. 8. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Iguanodon Dinosaur with details as below. 1.Eys blink. 2. Mouth open close. 3. Head - left right. 4. Neck - up down. 5. Breath. 6. Tail sway. 7. Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Triceratops Dinosaur with details as below. 1.Eys blink. 2. Mouth open close. 3. Head - up down. 4. Neck - left right. 5. Breath. 6. Tail sway. 7. Sound. Spine L=5.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Velociraptor Dinosaur with details as below. 1.Eys blink. 2. Mouth open close. 3. Body - left right. 4. Tail sway. 5. Sound. Spine L=3.00M. with feather H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Albertosaurus Dinosaur with details as below. 1.Eys blink. 2. Mouth open close. 3. Head - turn. 4. Head - left right. 5. Neck - up down 6. Body - up down. 7. Tail sway 8. Sound. Spine L=7.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Oviraptor Dinosaur with details as below. 1. Mouth open close. 2. Head - left right. 3. Head - up down 4 Breath.5. Sound. Spine L=3.00M. with feather H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Spinosaurus Dinosaur with details as below. 1. Eyes - Blink 2.Mouth - open close. 3. Head - left right. 4. Neck - up down 5. Front claw scratch. 6. Breath. 7. Tail sway. 8. Roaring Sound. Spine L=6.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Design, Development, Supply, Installation, Testing and commissioning of Animatronic Model of Mamenchisaurus Dinosaur with details as below. 1. Mouth - open close. 2. Head - up down. 3. Head - left right. 4. Neck - up down 5. Neck - left right. 6. Breath. 7. Tail sway. 8. Sound. Spine L=15.00M. H - according to the proportion. etc. complete. As directed by Engineer-In-Charge.

Providing, installing and commissioning of Coaster Ride Syatem, Inclusive of 1. Ride Track - Length of 450 Mtr of 2 Nos MS round pipe of dia 60, 4 thk with connecting Foots and side support. Two 100 AMPS bus bar channels throughout track complete with holding brackets, joint Clamps, feeder Connector. 2. Trains - 6 Nos. (seating capacity - 4 persons in each coach). Five Trains having 5 coaches each, one train with 4 coaches and drive. Five trains operational and one is stand by. Drive mechanism in each train - 48v DC geared unit. Break mechanism at 4 locations - NC type spring loaded break operated through pneumatic diaphragm, complete with main panel 415V AC, complete with ELCB, step down transformer, multi voltage, AC to DC converter, PLC, Ride control panel complete withindicators, HMI, Emergency button, Emergency indicators, joy stick operation. Synchronisation system - Cars to sound on ground. Synchronisation system - Cars to Animatronics (Dinosaurs). Waterproof casing and sound system. Servers and Control units for synchronised play back - 30 Nos.. Information speakers. etc. complete/. As directed by Engineer-In-Charge.

Supplying erecting testing and commissioning Fabricated panel LBSS 1 MAIN LT PANEL as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of 1250A 4P ACB + 1 nos of 1000A 4P ACB as Incommer & 3 nos of 400A TPN MCCB + 3 nos of 100A TPN MCCB + 300A TPN MCCB 3 Nos+250A TPN MCCB 1 Nos+ 630A TPN MCCB 1 nos +32A TPN MCB 10 nos + 63A TPN MCB 3 nos as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Refer : Annexure Sheet A) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel LBSS 2 MAIN LT PANEL as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 2000A 4P ACB + 1 nos of 1000A 4P ACB as Incommer & 6 nos of 400A TPN MCCB + 800A TPN MCCB 1 nos + 630A TPN MCCB 1 nos + 100A TPN MCCB 2 nos + 200A TPN MCCB 1 nos as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Refer : Annexure Sheet B) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel Children's Play DB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following Incomer 3 Pole MCCB 415V, 800 A 1nos, and Outgoing and 8 No TPMCB 40A to 63A,1 no TPN MCCB 630A, 1 no of TPN MCCB 400A, 2 No of TPN MCCB 100A, 2 No of 32A TPMCB complying to design as per IS 61439 (Part 1) (Refer Annexure E) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel Ride PDB 1 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of 630A 3P MCCB as Incommer &2 nos of 250A TPN MCCB + 7 nos of 63 A TPMCB as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Refer : Annexure Sheet F) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel Fire pump PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of 250 3P MCCB as Incommer &2 nos of 160A TPN MCCB + 1 nos of 16A TPMCB+ 3 nos 32A DPMCB as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel Mera bharat Mahan PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of 630 3P MCCB as Incommer &32 nos of 63A TPN MCB + 2 nos of 32A TPMCB as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Non CSR)

Supplying erecting testing and commissioning Fabricated panel Amusement Park PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of 200 3P MCCB as Incommer & 4 nos of 32A TPN MCB + 2 nos of 16A TPMCB + 1 nos 63A TPMCB + 5 nos of 16A SPMCB + 1 nos of 32A SPMCB as outgoing refer SLD Panel complying to design as per IS 61439 (Part 1) (Non CSR)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no.SW-SWR/MCBDB (CSR No - 5-4-1)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No - 5-3-10)

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No - 5-3-2)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No - 5-3-11)

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB (CSR No - 5-5-2)

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR No - 5-6-6)

Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS ( CSR 3-7-4 )

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS ( CSR 3-7-5)

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS (CSR No - 3-7-8 ( New))

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete (CSR No - 3-8-11)

Supplying and erecting integrated LED Highbay Fitting 135W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 20000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2 HL - Highbay Light (CSR No - 2-6-3)

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. (CSR No - 2-2-1) Tube light

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR No - 2-1-6)

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR No - 2-1-4)

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR No - 2-1-5)

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty (CSR- 2-1-16)

SITC of ceiling Gimble spots, with 3 nos of adjustable focus LED,3 x 10 W each having ,Al die cast housing system lumens output of Min. 3300 Lumens, min. efficacy of 110 lumen/W, CRI>80,Input Frequency - 50 Hz, CCT upto 3000K, Beam Angle of 30 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with acessories complete with 3 years warranty., Equiv to Nymane (Non CSR) Triplet Light

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. Bulkhead light (CSR- 2-1-15)

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. Staircase light (CSR- 2-1-17)

Supplying and erecting HVLS Ceiling fan 230 V A.C. 50 cycles 2400 mm, max. energy consumption of 32W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF (CSR no - 2-10-22 (New))

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. (CSR NO- 2-11-5)

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (CSR NO- 2-11-6)

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW (Avg. Length 15 Mtr.) (CSR NO- 1-7-6 New)

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ HW (Avg. Length 15 Mtr.) (CSR NO- 1-7-15 )

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG_0002_PW/SW. (Avg. Length 15 Mtr.) (CSR NO- 1-7-12) ( Primary light point)

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW (CSR NO- 1-7-22)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG_0002_PW/CW (CSR NO- 1-7-26)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-10)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-11)

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-12)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-2)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-2) 1/2

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-3) 1/2

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-3)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete (CSR No - 1-6-1)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (CSR No - 1-6-2)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete (CSR No - 1-6-10)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR No - 1-6-11)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. (CSR No - 1-6-28)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected. (CSR No - 1-6-30)

SITC of Exit Signages with 1 x 3 W LED. with Single / double sided & hanging arrangement. With Battery Backup. Exit Signages: A range of large exit signs for 32m, 48m or 60m viewing distances with Lithium-Ion (LIION) battery technology. Designed for ceiling installations. Electronics designed to lengthen the life of the battery, minimizing maintenance costs, as well as an environmentally friendly battery Complete as required. (NON CSR)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR no - 7-11-6)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR no - 7-11-7)

Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete (SSR No : 51.16 (Civil)) (For Cable tray support)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-20)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-18)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-17)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-34)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-33)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-32)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-17)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-8)

Supplying and erecting triple pole mini feeder pillar with 500V, 300A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP (CSR No - 5-2-2)

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. (CSR No - 2-4-4) SL - Street Light

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (CSR No - 2-5-5) PTL - Post top lantern

SITC Building focus lights with different beam angles & multiple lumens output. 100 W power, 6 LEDs/fixture,system lumens output of min. 1000 lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 5000K CC or DMX512 control.IP66 Protection, with powder coated grey color housing.Frequency 50/60 Hz, operating range of 140-260V, in built surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK08 Class rated on provided PVC Block / wooden board Control Mode: CC/DMX512,Installation Pipe Diameter: Ø 8.5 x 60 mm, Temperature of Working Condition: -30⁰~50⁰C, with 3 years warranty. Tag : SFL - Special Focused Light - 150 W fitting (NON CSR )

Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty. Tag : STRL - LED Strip - 95 W / mtr (CSR No : 2-1-11)

SITC of 31 W Color changing & RGB Buried Uplighter ideal for uplighting facades, columns & features with multiple Optics & extensive pallet of colors.Luminaire body uses high pressure die-casting aluminium. Coveruses stainless steel while the buried barrel uses high-quality corrosion resist antnylon. The diffuser use thickened toughened glass, having an advantages inimpact resistance and abrasion. the diffuser and light cover is at the samelevel, no fall. RGB color It’s carried out by the DMX512 system Humanized design, fit for a wide range of demand in variouspplications temperature ofthe cover is low, High strength toughened glass, can withstand a weight of 3400 KG.system lumens output of min. 2970 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated with 3 years warranty..Equivalent to LHEOGCPSU48V027 Tag :EMN - Engross RGB - 31W (Non CSR)

Supplying and erecting Clear post top and Top Mounting LED Lantern - 45 W fitting (BLS BOR 45W WW CL TM) Relaxed white well-lit, with reduced glare having opal PC diffuser,, PDC Heat sink on Top Extruded aluminum body in grey powder coated, Luminaire is wired with in‐built driver, Constant current electronic driver provided with high voltage, open & short circuit protection, Luminous flux - 4500 lm, Luminaire efficacy - 100 lm/W, Input Voltage - 140V to 270V AC,CRI>70,THD <10%,p.f. >0.95,CCT upto 6500K Input Frequency - 50 Hz, Ingress Protection - IP65 & IK08 Class operating range of 140-260V, in built surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50 with 3 years warranty. Tag :GL -Gate Light (NON CSR)

SITC of 10 W Monochromatic Buried Uplighter ideal for uplighting windowns tones of white.. Coveruses stainless steel while the buried barrel uses high-quality corrosion resist antnylon. The diffuser use thickened toughened glass, having an advantages inimpact resistance and abrasion. the diffuser and light cover is at the samelevel, no fall. monochrome or RGB color It’s carried out by the DMX512 system Humanized design, fit for a wide range of demand in variouspplications temperature ofthe cover is low, High strength toughened glass, can withstand a weight of 3400 KG.system lumens output of min. 2970 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 80deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated with 3 years warranty..Equivalent to LHEOAFPBU48J002 Tag :ADM - Adorn Mini- - 10W (Non CSR)

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. (CSR No -2-4-19)

SITC of LED Spike light 7W (IP65) with color rendering index (CRI) 80. Luminaire body uses high pressure die casting aluminium, net weight of 0.3 in kg, height of 2.95 inch, length of 3.93 inch and width of 2.95 inch. Protection class of class 1, lumen output of min. 360 lumen with 1 year of warranty. Equivalent to 919215850753. Tag :SPK -Spike Light (NON CSR)

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. Tag : HM - Flood Light (CSR no -2-4-18)

Providing & erecting 5 m high (clear height) cast iron pole unit having base of size 410x410 with PCD 505 mm should be grouted using 4 nos. J-Type of hot dip galvanized type Anchor bolts of size 20x750 mm long .The Lamp Post should be designed to hang 1 no of 18 Wt decorative hanging Lantern.Material used in poles as cast iron parts with Bottom dia of 300 mm & top section dia of 60 mm with bracket arm of 48 mm OD (Non CSR) (For Post Top lantern)

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (CSR 8-2-13) (For Street Light)

Supply and erecting 9m (clear height) Fixed type high-mast (Top-100mm, Bottom- 200mm) with hexagonal /round bracket and foundation bolts suitable for max. 4 nos. flood light fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaires). (CSR No - 8-2-8)

Supplying and erecting 16 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/ HM (excluding luminaries) (CSR No - 8-2-2)

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP (CSR 9-1-4) Earthing for Street light poles

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). (CSR No - 16-3-5) ( DB)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). (CSR No - 16-3-8) (for post top light )

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (CSR No - 16-3-9) (for street light )

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). (CSR No - 16-3-10) ( For 9 mtr highmast)

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). (CSR No - 8-2-2) ( For 16 mtr highmast)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-17)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-30)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3.5 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No - 7-1-15)

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP (CSR No - 7-8-1)

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (CSR No : 7-6-7) (For Power Cables)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-10) (For CCTV & ELV Cables)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-9 ) (For External light )

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC (CSR NO 1-10-1)

Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-COC/NC (CSR NO -1-10-6)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR.NO 1-12-4)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (CSR.NO 1-12-2)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. (CSR.NO 1-6-28)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background (CSR.NO 1-6-35)

Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC (CSR.NO 1-10-17 (New))

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-19)

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-16)

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-14)

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW (CSR.NO 1-8-1)

Supplying & erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification no. WG-TW (CSR.NO 1-9-20)

Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW (CSR.NO 1-8-17)

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. (CSR.NO 1-9-30)

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete (CSR.NO 1-9-29)

Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete (CSR.NO 1-9-21)

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH (CSR.NO 1-10-8)

Supplying and fixing 12 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables on wall in provided U rack complete as per specification no. WG-NAS/ LIU (CSR.NO 1-12-6)

Supplying and fixing SC/LC type multimode pigtails (OM4) as per specification complete. WG-NAS/LIU2 (CSR.NO 1-12-14)

Supplying and plugging 3 m fibre patch cord LC-LC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC (CSR.NO 1-10-24)

Supplying and fixing multimode pigtails with SC/SC type splicing for (OM4) complete. (CSR.NO 1-10-28 (New))

Supplying, fixing, and configuring 24 ports + 4 (SFP+) port, Managed Layer 2, POE Switch of , 370W, 6KV surge protection on ethernet port and console port for management erected in provided rack complete. (CSR.NO 1-11-10(New))

Supplying, fixing, and configuring 48 ports managed gigabit switch Layer 2 with 48 10/100/1000 Base-T ports management switch with 4 10GE SFP+ ports erected in provided rack complete. (CSR.NO 1-11-13(New))

Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM transceiver erected in provided rack complete. (CSR.NO 1-11-15)

Supplying, fixing, and configuring media convertor 1000 Base-T to 1000 base?SX SC multi-mode media converter (550m) complete. (CSR.NO 1-12-38)

Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA (CSR.NO 1-12-15)

Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. (CSR.NO 1-8-26)

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-29)

Supplying and fixing IP66 enclosure for fibre splicing complete. (CSR no - 1-10-29)

SITC of 4 MP Full HD IP Dome /Bullet Camera Image Sensor 1/3" 4 megapixel progressivescan CMOS Effective Pixels 2304 (H) × 1296 (V) Electronic Shutter Speed Auto/Manual 1-1/100000 s Min. Illumination 0.5 lux F2.1 (Color); 0 lux (IR LEDs on IR Distance - nUp to 100 ft (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation - BLC/HLC/DWDR White Balance - Auto/Manual Gain Control - Auto/Manual Noise Reduction - 3D Privacy Masking- Up to 4 areas Lens verifocal Length- 2.8 -12 mm Horizontal Angle of View 92° 86°-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3 MP (2304×1296) 1080p Main Stream 4 MP ,30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens with in built mike ,320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -NON VIF Profile S CGI Max. User Access 20 users Mobile App - for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C); 10% to 100% RH condensing Ingress Protection IP66 Vandal Resistance - IK10 Regulatory FCC Part 15B Class B (3 years warranty) (Non CSR)

SITC of 1080p IR Bullet camera(2/12MP) with 1/2.8‑inch CMOS, Total sensor pixels 1937 (H) x 1097 (V); 60fps, optical & Digital zoom in zoom out 2/12MP, 60fps, Sensitivity – (3200K, reflectivity 89%, F1.4, 30IRE) Color 0.0225 lx, Mono 0.0051 lx, With IR 0.0 lx, 134dB WDR, H.265; H.264; M- JPEG, Automatic Electronic Shutter (AES); Intelligent Dynamic Noise Reduction, In built mike, Intelligent Defog,Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, (Camera should be able run minimum 4 to 5 analytics simultaneously), 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Audio detection (if microphone used), Privacy Masking, Pixel counter, Memory card slot, IR Rang 60mtr, Automatic Varifocal 2.8 to 12 mm, Alarm Input 1/1, Audio Input/output, RJ45, G.711, Signal-to-Noise Ratio >55 dB, Aud io Streaming Full-duplex / half duplex, ONVIF Profile S & G & T, IP67, IK10. SD card support up to 2TB. FTP, Dropbox and e-mail applications 3 year warranty (Non CSR)

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. (CSR.NO 1-12-1)

SITC of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches, 3 years warranty (Non CSR)

SITC of all in one Type Core i5 Family Processor Spec 2.3 GHz Ram 8 GB Memory Technology DDR4 Computer Memory Type GDDR4 Hard Drive Size 1 TB Hard Disk Description HDD hard Drive Interface Serial ATA SSD 256 GE Additional Graphics Coprocessor Intel UHD Graphics 630 Graphics Chipsel Standing Screen display Size 21.5 Inches Connectivity Type Bluetooth Wireless Type Bluetooth 801.11ac. Hardware Platform Windows Operating System Windows 10 Professional Warranty - 3 years (NON-CSR)

SITC of Full HD commercial LED TV DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920 x 1080 pixels Viewing Angle178°/178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC) (NON-CSR)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR.NO 1-1-9)

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit (CSR.NO 1-2-2)

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP (1Nos Hydrant Pump and 1 Nos Sprinkler Pump) (CSR No : 13-1-5)

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-1)

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-2)

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-3)

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-4)

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-5)

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-6)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-7)

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-8)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 100 mm ring main of fire fighting system. (CSR No : 13-6-9)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 150 mm ring main of fire fighting system. (CSR No : 13-6-10)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 200 mm ring main of fire fighting system. (CSR No : 13-6-11)

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (CSR No : 16-1-6)

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (CSR No 7-6-7)

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (CSR No : 13-7-7) ( For Booster Pump)

Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR No : 13-7-13)

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-17)

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-18)

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-19)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-20)

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-21)

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-22)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV (CSR No : 13-7-34)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (CSR No : 13-8-2) (in Staircase )

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL (CSR No : 13-8-4)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ (CSR No : 13-8-7)

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC (CSR No : 13-8-10)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV (CSR No : 13-8-13)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (CSR No : 13-8-14)

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS (CSR No : 13-8-15)

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP (CSR No : 13-8-16)

Supplying & erecting Water level controller 230/415 V, A.C.Four way under ground & Over head tank operation only (CSR No : 12-4-15)

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849/15683 of 1 kg capacity with necessary clamp for erection on wall. (CSR No : 10-2-35(Old))

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. (CSR No : 10-2-36 (Old))

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. (CSR No : 10-2-32 (Old))

Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. (CSR No : 10-2-33 (Old))

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. (CSR No : 13-15-1)

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. (CSR No : 10-2-24 (Old))

Providing and fixing of portable fire extinguisher Chemicl Foam Type of 6 Kg Capacity ( IS 10204). Complete with standard discharge valve with tube CI bracket for wall mounting etc. ( ISI MARKED) with signboard depicting the type, method of use etc. Application- at Canteen and Pantry area. Florescent type ( should glow in darkness)Indication stickers to be provided in various relevant location. rate should inclusive in this section. Confirming to IS:2190 (NON CSR)

Providing and fixing of portable fire extinguisher WATER TYPE 9 LTR. PORTABLE FIRE EXTINGUISHER ( IS 10204). Complete with standard discharge valve with tube CI bracket for wall mounting etc. ( ISI MARKED) with signboard depicting the type, method of use etc.Application- at Canteen and Pantry area. Florescent type ( should glow in darkness)Indication stickers to be provided in various relevant location. rate should inclusive in this section. Confirming to IS:2190 (NON CSR)

SITC Florescent type ( should glow in darkness)Indication stickers(As Per IS:9457 for Safety colour and Safety, size of 6cm x 15 cm IS:12349 for Fire Protection Safety Signs, IS:12407 for Graphics symbols for Fire Protection Plan.) like DANGER, NO SMOKING, EXIT, FIRE ESCAPE, EXSTINGUSHERS, HYDRANT, ARROWHEAD DIRECTION ,PUMP NAME on panel and PRESSURE SWITCH NO. ,HYDRANT POST BOX ,etc.to be provided. Also board " DO AND DONT" to be provided in various relevant location. The letter size as specify in the tender. (NON CSR)

Supply, erection of Florescent type ( should glow in darkness) emergency telephone numbers like "police", "fire brigade", hospital", "doctors", & "responsible persons of the office", should be displayed in security cabin, reception area. The letter size as specify in the tender & the size is 50 cm x 30 cm (NON CSR)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No : 6-1-19)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (CSR No : 16-3-5) (for pumps + Extrenal Hydrant Pipe).

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track )synchronised switches 7) serviceable without draining pipes. (CSR No : 13-12-3)

SITC of Control Valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required. The Valve must be UL Listed Size: 200NB (NON CSR)

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FFSPR. (CSR No : 13-12-1) (Pendant + Upright)

SITC The Rosette Plate shall be fabricated by M.S.plate of 2mm thick and the finish shall be powder coated and color shall be as approved by architects /clients. (NON CSR)

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP (CSR No : 13-10-5 (New))

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF?AFAS/SD . (CSR No : 13-10-6 (New))

Supplying, installing, testing and commissioning of intelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for high heat type detectors, in built isolation mode, suitable for industrial/ kitchen/ boiler room etc. with 3 years equipment replacement warranty, IS : 2175-1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. (CSR No : 13-10-8 (New))

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI (CSR NO:13-9-9)

SITC of Power Supply SITC of Power Supply or SMPS Output 24V - 3 Amp. with IP 65 Enclosures etc. Rate shall be including with required support system. key features as followed: - Universal input: -220-230 v AC; Overcurrent/overvoltage protection; Voltage adjustment +10% Spring-up crew terminal, IP20; DIN rail or panel surface mount (NON CSR)

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. (CSR NO:13-10-9 (New))

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. (CSR NO:1-6-27)

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. (CSR NO:13-10-13 (New))

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (CSR NO:13-9-10)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (from Pressure switches to Main Panel) (CSR NO:13-9-11)

SITC of Network Controller SITC of EN-54 Certified IP based EVAC PA controller capable of 12 zones in the system and expandable upto 400 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support the following: single line switching or redundant group A/B switching, amplifier redundany, 4 x 100V audio inputs and 12 speaker line outputs. Fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, software dependent solutions shall not be accepted.The network controllers will be integrated using an interface module which is able to send and receive Dante audio to and from other Controllers.Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. The omneo interface unit is able to send and receive Dante audio to and from other PA Controllers with the transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency shall be possible.Ethernet connectors (Primary /Secondary)100/1000 Mbit/s, RJ-45,integrated transformer isolationSampling rate 48 kHz. Data format 24 Bit. Audio channels Up to 16 ✕ 16 at 48 kHz, Audio flows Up to 16 ✕ 16 simultaneous audio streams,Latency across network 5 ms (typically). Multiple controllers should communicate over IP without need of running PC/Server. Graphics User Interface software should be considered for Monitoring and control of signal. Make and Model: - Equivalent to PVA-4CR12 + OM-1 (NON-CSR)

SITC of Router SITC of EN54 Certified EVAC Router for adding 24 zones in the system and to route 4 channels into 8 100V audio inputs to 24 loudspeaker line outputs. 2-in-6 matrix. 20 Control Inputs, 26 Control Outputs. Shall support single line switching or redundant group A/B switching, amplifier redundancy. Impedance measurement and Pilot Tone supervision for speaker line monitoring. Make and Model: - Equivalent to Bosch PVA-4R24 (NON-CSR)

SITC of 15 W Horn Speakers -15 W high‑efficiency ABS horn loudspeaker with weather protection IP65 - Max. Power: 22.5 W,Rated Power: 15 Watts, Power tapping: 15/7.5/3.75W - Effective frequency range(-10 dB) :(500 Hz to 5KHz) - SPL at rated power (1Khz) 115 dB - Self extingguishing acc. to UL94 V0 - IP65 acc. to IEC 60529, Safety acc. to EN60065 Make and Model: - Equivalent to Bosch LBC3470/00 (NON-CSR)

SITC of Full Metal grille ceiling speaker 6W ceiling mount speaker with excellent speech & music reproduction - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W - Effective frequency range(-10 dB) : 150 Hz to 15KHz - SPL at rated power (1Khz at 1 m) 108 dB - Opening Angle 1 KHz / 4 KHz:: 180° / 45° Make and Model: - Equivalent to Bosch LBD0606/10 (NON-CSR)

SITC of 6 W ABS Cabinet Speaker - 6W ABS wall mount speaker with excellent speech & music reproduction - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6 / 3 / 1.5 / 0.75 W - Effective frequency range(-10 dB) : 145 Hz to 18kHz (-10 dB) - SPL at rated power (1Khz at 1 m) 99 dB - Opening Angle 1 KHz / 4 KHz (-6 dB):165º / 88º(H/V) Make and Model: - Equivalent to Bosch LB9-UC06 (NON-CSR)

SITC of Wireless Handheld Microphones Power Source - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz ; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR) )

SITC of Wireless Belt-pack Transmitters Batteries - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR)

SITC of Wireless Microphone Receivers Power Source - 12V to 18 V, 500 mA; Channels - 57 channels in steps of 125 kHz; Antenna - xx ; Connector - BNC ; Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. ( (NON-CSR) )

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO: - 7-2-8)

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating /epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. (CSR No : 6-4-2)

Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 1 no. feeder with 1 LBS and 2 nos. feeder with 2 VCB. compliant to IEC 62271 -100,200 and 102, as per specification no. SW-HTS/RMU SCADA (CSR No : 5-9-21) - HTB 1

Supplying, installation, testing and commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, indoor type, vacuum cast coil (VCC) dry type cast resin transformer, Copper wound , Dyn11 vector group, delta/star connection with additional neutral brought out on load side, for indoor use continuous duty, average temp rise of winding (at principal tap) 115°C at ambient temp max 50°C & min -5°C at full load rating, with Tapping (with off circuit tap links type tap changer) for off load +5 to - 5% @ 2.5% in +2/-2 steps, HV variation, class of insulation H/H, method of cooling AN, no load loss at rated voltage & frequency (+15% IS Tol) 1.60 kW, full load loss at rated current 5.00 kW, with 98.96 % efficiency at full load & 99.10 % at 1/2 full load, with 75 kV peak full wave lightning impulse withstand voltage with complete enclosure having IP 21 degree of protection, cable box arrangement at HV side & bus duct at LV side ,with rating & diagram plate, base channel, earthing terminals & WTI scanner with 3 PT-100 sensors, etc. standard accessories complete with test certificate (as per IS:11171 & IS 2026 ) with necessary permissions of Electrical Inspector, as per specification no. SS- TR (CSR No - 10-5-4)

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 380/400 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 65.5 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 450 Ltr etc. onprovided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DGEach 2994442 11- (CSR No - 11-1-20)

SITC of D.G. Exhust Pipe 150 mm class B, M.S. black pipe with bends & other accessories as required with 'Thermal insulation with 100 mm thick rock wool and cladded with 0.6 mm Al. foil for 150 mm dia also with including required adequate supporting system (The Distance to be Considered as per PWD Guidelines and Approval) (NON-CSR)

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (CSR NO : 7-3-3)

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR NO : 7-5-2)

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA (CSR NO : 9-1-6)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO : 9-1-3)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO : 9-2-7 )

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO : 9-2-8 )

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP (CSR NO : 7-8-1 )

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution,etc. (All above contents shall be of standard makes) (CSR NO : 10-6-24 )

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete. Shock treatment chart (CSR NO : 10-6-22 )

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 tested having 3mm thickness up to 33 kV11 KV insulating mats (CSR NO : 10-6-27 )

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV 33 V insulating mats (CSR NO : 10-6-25 )

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete. Hand gloves (CSR NO : 10-6-23)

Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 (CSR NO : 6-1-15)

Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982 (CSR NO: 6-1-16 )

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (CSR NO: 7-6-7 ) .(For Road Crossing and HT Cables)

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. (CSR NO: 6-3-5 )

Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (CSR No-16-2-1)(For Manhole Chamber)

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). (CSR No-16-2-4)(For Manhole Chamber)

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (CSR No-16-1-6)(cover For Manhole Chamber)

SITC of Vertical Air Termination Solid Aluminium with base- 16 mm dia and 1000 mm long. Air Terminal Base should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol Supply of Special standing seam fixureClamp for Air terminal on Metal Structure -Site specific (NON CSR)

SITC of Vertical Air Termination Solid Aluminium with dia 16 mm, for LPS suitable for firm routing on wall / parapet/ roof or sheet/calzip tested by accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 (NON CSR)

SITC of Cross splicer should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol 10 Dia Stainless steel Air termination- 3 Mtrs Long with 2 nos SS Clamp Suitable for side mounting on wall (NON CSR)

SITC 10 Dia Stainless steel Air termination- 3 Mtrs Long with special Fixing Arrangement (movable support + 3 Nos of 14mm Dia, 2mm Thick Al. pipe) (NON CSR)

SITC of concrete block for fixing/Mounting Vertical Air Termination / Mast on RCC Floor with special concrete compound Quick and easy mounting of interception rod using anchor. (NON CSR)

SITC of Cross splicer should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol 10 Dia Stainless steel Air termination- 2 Mtrs Long with 2 nos SS Clamp Suitable for side mounting on wall (NON CSR)

SITC Air Terminal 16mm Dia and 1500mm Length Solid Aluminium Blunt Special Fixing Arrangement for fixing Air Terminal (NON CSR)

SITc of 8 mm dia solid Aluminium Conductor tested as per IEC 62561- 2 conducted in the Govt. aggregated thirty party laboratory to meet the requirement of IS / IEC 62305 (NON CSR)

SITC of Standing Seam clamp :To hold 8 mm Al conductor at every 1m dist on the top roof without any drilling on roof , Installation can be made through simple fastening system ,mainly used for seaming sheet roof application tested as per IEC-62561-2 for conditioning & Ageing test & conducted in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 62305 (NON CSR)

SITC of Special fixure Clamp for conductor on Metal Structure roof/wall-Site specific (NON CSR)

Making cement concrete foundation including excavation ( 100x100x50 ) mm deep in 1:3:6 cement concrete,Duly plastered, with necessary curing and finishing complete. (NON CSR)

SITC of Expansion Piece without connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations to be provided on conductors length over 20 meters to connect Solid Round Al. Conductor at both ends to meet the requirements of IS/IEC 62305. (NON CSR)

SITC of Al. Straight Splicers for 8mm and 10 mm Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (NON CSR)

SITC of Cross splicer should be ttested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (NON CSR)

SITC of Al. Straight Splicers for 8mm and 10 mm Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (NON CSR)

SITC of Cross splicer should be ttested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol Supply of Al conductor holding clamp suitable for fixing 8 mm ,.Conductor holder @ 1 meter distance should be tested as per IEC-62561-2 conditioning & Ageing test, conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/ IEC 62305 Supply of Pipe type Clamp Holder -SS-Round for fixing conductor on pipe to meet the requirements of IS /IEC 62305 -3 (NON CSR)

SITC universal parapet conductor holder, MOC - Polyamide/Nylon suitable for 8 to 10 mm dia conductor, Used for solid round AI air terminal on Parapet/Concrete wall, fixed using screws as per IS/IEC 62305 Length 100- 150 mm (NON CSR)

SITC Each down-conductor should be provided with a test link in order to disconnect the earth termination system for enabling measurements. SS Test Link To connect Round to Flat conductor. (NON CSR)

SITC of 25 X 6 mm GI strip from AL Conductor to the earth pit station and further the same strip shall be used for interconnecting all the earth pits below ground leve Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and use exclusively for lightning protection ,earthing system and ring equipotential bonding (NON CSR)

SITC LPES Flat strip holder with female thread M^ via Slotted clamp, thickness 5 mm, Fixed conductor routing conductor support GI 30 x 3.5 mm height of conductor holder as per IEC 62305 Part 151212 (NON CSR)

SITC Earth Electrode Cu Bonded Steel Rod 14.2mm dia x 3000mm-(250Microns) Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). 14.2 / OD SS Clamp Both Side OEM Safe carbon based backfill compound - 50 Pounds (NON CSR)

SITC of Electric Traction Passenger Lift with 1299498 · Rated capacity :- 10 Passenger/680Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. (17-1-4). Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providingand fixing steel girders/RCC work having adequate strength for mounting andhoisting lift machine etc. complete as per specification no. LFT.

For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete (CSR No - Add on - A5)

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR NO - 5-3-13)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR NO -5-3-7)

Supplying, fixing and commissioning 2 pole, RCBO 6 / 10 / 16 / 20 / 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-9)

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-13)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/ FP MCB / RCCB / RCBO complete erected on angle iron/GI frame. (CSR NO -5-4-13)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR NO -6-1-19)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO -1-6-1)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete (CSR NO -1-6-10)

Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. (CSR NO -1-5-7)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. (CSR NO -1-6-29)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO -7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO -7-2-8) (For car Lighting)

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO -9-1-2)

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. (CSR NO -9-2-4)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-96)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-95)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No.3-11-94)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. CSR No. 3-11-93)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-92)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. CSR No. 3-11-91)

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. (CSR No. 3-11-90)

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. (CSR No. 3-11-89)

Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct / pipe of 100 mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, coupling, complete at position. CSR no. 13-11-71)

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted flanged volume control damper of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. (CSR No.3-11-80)

Supply, fabrication, installation and testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete. (CSR No. 3-11-82)

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007. (CSR No. 3-11-83)

Carrying out core cutting of size 3'' to 5'' dia x 15'' length in the c.c./rock/stone wall with help of specialized core cutting machine in proper manner and finishing the site as original. (CSR No. 3-11-77)

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size. (CSR No. 3-11-87)

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree. (CSR No. 3-11-88)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-1)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No.7-11-3)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-11)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-13)

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV. (CSR No. 1-3-15)

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (CSR No. 1-2-4)

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (CSR No.2-10-15)

Supplying and erecting iron sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No. 6-1-19)

Supply, Fixing & Commissioning of Valves & Gauges for Chilled Water Circuit with Closed Cell Nitrile Rubber Class 'O' Insulation of 25 mm thickness covered with 26 G Aluminium Cladding. Pressure Independent Balancing Control Valve suitable for 320.4 USGPM.

Supply, Fixing & Commissioning of Valves & Gauges for Chilled Water Circuit with Closed Cell Nitrile Rubber Class 'O' Insulation of 25 mm thickness covered with 26 G Aluminium Cladding. Pressure Independent Balancing Control Valve suitable for 214 USGPM.

Supply, Fixing & Commissioning of Valves & Gauges for Chilled Water Circuit with Closed Cell Nitrile Rubber Class 'O' Insulation of 25 mm thickness covered with 26 G Aluminium Cladding. Anti Vibration Bellow 100 mm.

Supply, Fixing & Commissioning of Temperature Gauges with Mercury in Glass Stem Type.

Supply, Fixing & Commissioning of Pressure Gauges SS Siphon & Gun Metal Ball valve. 150 mm dia Glycerine filled dial.

Supply, Fixing & Commissioning of Gun Metal Ball Valves Size: 25 mm Dia.

Supply, Fixing & Commissioning of Auto Air Vent.

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 24 G Non CSR Rate Approved for 2022-23 at Mumbai.

Supply and Installation of washable, inherent and permanent fire retardant type fabric air dispersion ducting system. Fabric air dispersion system shall be made of 100% inherent and permanent fire retardant polyester and shall have a flame spread and smoke developed index satisfying Class 1 rating in accordance with ASTM E 84 of NFPA 90-A testing Standard and shall also have a fire propagation index (I) of less than 12 and first index score of less than 6 satisfying Class ‘O’ rating in accordance with BS 476: Part 6: 1989+A1: 2009 testing standard. Permeability of fabric ducts should be less than 0.5 cfm/ft2 (at 120Pa pressure). Fabric duct system should be complete with all attachments (straights, bends, endcaps, Tee's, reducers), suspension fittings, laser cutting orifices for air dispersion, pressure adjustment device and airflow control device as per manufacturers standards. The item should also include necessary mounting arrangement alongwith necessary runs of gripple wire and clamping arrangements and secondary supports neatly clamped to the existing structure etc. complete. Diameter 600 mm

Al. Louvers for Fresh Air / Exhaust Supply, installation, testing & commissioning of Fresh Air / Exhaust Air Louvers - constructed in Extruded Aluminium Anodised finish. Blades inclined at 45deg. on 40mm pitch complete with:Minimum Measerable unit 0.1 Sq.mt.a) Sheet steel enclosure cowl b) Opposed Blade Volume Control Damper c) Bird wire guard in galvanised steel with front flanged frame Non CSR Rate Approved for 2022-23 at Mumbai.

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 2000 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 1600 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 450 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 350 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 250 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 200 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 150 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 200 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 250 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 300 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 350 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 450 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 600 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 700 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 900 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 1000 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Acoustic Insulation of Duct with 19 mm thick Open Cell Nitrile Rubber with Anti Microbial Treatment & of Class '1' stuck inside the duct using rubber adhesives. Density of 140 - 180 Kg/m3.

Supply, Installation, Testing & Commissioning of Underdeck Roof insulation with 19 mm thick Nitrile rubber insulation with Aluminium foil on one side.

Supply, Installation, Testing & Commissioning of 100 mm dia Preinsulated flexible duct with end clamps and Aluminium foil on both side as required in various sizes as below. The duct shall fire retardant UL standard approved.

Supply, Installation, Testing & Commissioning of UV Coating For Exposed Copper Pipes to Atmosphere. Piping insulation to be covered with Woven Glass Cloth 100 gsm and finished in U/V Treatment.

Supply & Top of Additional Refrigerant R410A for VRV / VRF System as per Manufacturer requirement.

Supply,Installation,Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size: Grille: 600 x 600

Supply, Installation, Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size:150X150

Supply, Installation, Testing & Commissioning of Aluminium powder coated long jet nozzles capable of delivering with VCD. 400 mm Dia.

Supply,Installation,Testing & Commissioning of 150 mm Disc Valve. PVC / HDPE Material Only. (Ordering by HVAC vendor only after Approval of Technical Specifications & Colour shade of Physical sample by Consultant & Architect).

Supply, Installation, Testing and Commissioning of Air Cleaning Equipment Dry Scrubber confirming Following & as per specification. Construction: Made of 16 gauge galvanized sheet, high bake epoxy powder coated or 2 mm mild steel plate oil proof of IP 54. The unit shall have energy efficient (IE3) Motor. Pre Filter: Washable type aluminium mesh pre-filter. Collector Plate: High grade Aluminium collector plates which should be alternatively charged positive & negative with large collecting area. Collector cell should be of permanent type and slide out facility for easy removal for cleaning. Insulator: PTFE or Ceramic Insulator. Access door to filter section shall be equipped with safety limit switch. Oil outlet ½’’ shall be provided at under side (when fitted horizontal) Capacity of the Exhaust 20000 CFM

Supply, Installation, Testing & Commissioning of Double Skin Evaporative Cooling Unit complete with MS base frame, fan section, wet section & filter section. The unit shall have its own sump & frame. The sump shall be of 1.6mm thick SS 304 construction. 300 mm thick cellulose cooling pad, 10 micron HDPE filters & 4 Pass PVC Mist Eliminators. The unit shall be capable of delivering following Air Quantity. The colour of the unit shall be confirmed as per the client's requirement. The unit shall have energy efficient (IE3) Motor. 18000 CFM

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (50 mm Dia)

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (32 mm Dia)

Supply, Installation, Testing & Commissioning of cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) 25 mm dia.

Supply, Installation, Testing & Commissioning of Pressure Balancing valve suitable for 50mm Dia pipe so as to maintain 1kG pressure in the line

Supply Installation Testing & Commissioning of Exposed duct insulation with 19 mm thick nitrile rubber and externally covered with 26 gauge aluminium cladding for all leads and lifts.

Supplying & Installation of LED WALL WASHER, IP67,Top & Bottom Housing, 12W, BODY 24VDC. With outdoor Driver 230V/24VDC. RGBW,MATERIAL:- Recessed ALUMINIUM + TEMPERED GLASS, BEAM ANGLE:- 15°, SIZE:- 40 x 25 x 500mm. Colour of 12W LED Lamp - RGBWW, Beam Angle - 30 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED WALL WASHER, IP67,Top & Bottom Housing, 12W, BODY RGBW,MATERIAL:- Recessed ALUMINIUM + TEMPERED GLASS, BEAM ANGLE:- 30Degree, SIZE:- 40 x 25 x 500mm24VDC. With outdoor Driver 230V/24VDC. Colour of 12W LED Lamp - RGBW, Beam Angle - 15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED WALL WASHER, IP67,Top & Bottom Housing, 12W, BODY RGBW,MATERIAL:- Recessed ALUMINIUM + TEMPERED GLASS, BEAM ANGLE:- 4524VDC. With outdoor Driver 230V/24VDC. Colour of 12W LED Lamp - RGBW, Beam Angle - 45 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED WALL WASHER, IP67, 24W, BODY,RGBW MATERIAL:- ALUMINIUM + TEMPERED GLASS, BEAM ANGLE:- 30°, 45°, 10x65°, SIZE:- 40 x 25 x 1000mm24VDC. With outdoor Driver 230V/24VDC. Colour of 24W LED Lamp - RGB, Beam Angle - 30/15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED WALL WASHER, IP67, 12W,RGBW,SURFACE, BODY RGBW,MATERIAL:- ALUMINIUM + TEMPERED GLASS, BEAM ANGLE:- 30°, 45°, 10x65°, SIZE:- 40 x 25 x 500mm24VDC. With outdoor Driver 230V/24VDC. Colour of 12W LED Lamp - RGB, Beam Angle - 30/15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED CAST LIGHT, IP67, 18W,RGBW BODY MATERIAL:- DIE CASTING ALUMINIUM + TEMPERED GLASS + HIGH EFFICIENCY OPTICAL LENS, BEAM ANGLE:- 15°, 60°,. SIZE:- Ø135 x 100mm24VDC. With outdoor Driver 230V/24VDC. Colour of 18W LED Lamp - RGB, Beam Angle - 15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED CAST LIGHT, IP67, 18W,RGBW BODY MATERIAL:- DIE CASTING ALUMINIUM + TEMPERED GLASS + HIGH EFFICIENCY OPTICAL LENS, BEAM ANGLE:- , 30°, 45°, 60°24VDC. With outdoor Driver 230V/24VDC.,. Colour of 18W LED Lamp - RGB, Beam Angle - 30 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED CAST LIGHT, IP67, 36W,RGBW BODY MATERIAL:- DIE CASTING ALUMINIUM + TEMPERED GLASS + HIGH EFFICIENCY OPTICAL LENS, BEAM ANGLE:- 15°, 30°, 45°, 60°,. SIZE:- Ø180 x 140mm24VDC. With outdoor Driver 230V/24VDC. Colour of 36W LED Lamp - RGB, Beam Angle - 30/15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation 6W Flood Light RGBW As Per Above Specifications24VDC. With outdoor Driver 230V/24VDC. Colour of 6W LED Lamp - RGB, Beam Angle - 30/15 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation 3W Flood Light RGBW As Per Above Specifications24VDC. With outdoor Driver 230V/24VDC. Colour of 3W LED Lamp - RGB, Beam Angle - 30/16 degree. Make Hybec / Suncity / Unilamp or equivalent.

Supplying & Installation LED Strip White Colour IP65 Outdoor 24VDC. With outdoor Driver 230V/24VDC. 10W LED Lamp. Make Hybec / Suncity / Unilamp or equivalent.

DMX Controller 2Nos 512 Addressable with remote & sim Arrangement having feature to programme & setup from Remote operation through wifi/Lan/Computer. Make Hybec / Suncity / Unilamp or equivalent.

DMX Splitter 4 Channel & 8 Channel with capacity to drive signal upto 50 Meter without signal drop 230V AC. Make Hybec / Suncity / Unilamp or equivalent.

DMX Decoder to decode signal and operate with DMX512 as per requirements of effect. Make Hybec / Suncity / Unilamp or equivalent.

Control Panel to accommodate all above accessories with XLR cables Input and output Male Female 24Nos of M/F Connectror with MCCB incomer of 250A and distribution MCBS & RLCBS. Make Hybec / Suncity / Unilamp or equivalent.

Programming cost for DMX and all luminaire addressing with addressar required to map IP of Luminaire. Make Hybec / Suncity / Unilamp or equivalent.

Power wiring of all Luminaire through power cable and M/F connector through Outdoor Driver along with conduit. Make Hybec / Suncity / Unilamp or equivalent.

Control wiring through DMX cable of all Luminaire through power cable and M/F connector through with conduit. Make Hybec / Suncity / Unilamp or equivalent.

Cutting Existing Marble as per size to accommodate Luminaire in Ingroud to be mounted on SS plate with buffing and fixing back the complte assmbly in Inground as per requirement of site.and fixing back the marble

Soil / Murum Compaction Test (Proctor Density). 2 Test for 3000 Cu.M. for filling in plinth, 1 test per 1000 Cu.M.

Soil / Murum Liquid Limit and Plastic Limit Test. For WBM Binding Material - 1 test for 50 Cu.M. For WBM Screening -1 Test for 100 cum. For Earth Work/ Shoulders -2 Tests for 3000 cum. For GSB-1 Test for 400 cum. For Filling in Plinth -1 Test for 1000 Sqm.

SOIL / MURUM Field Density test by Sand Replacement Method. 1 Test for 3000 sqm For GSB/WMM 1 Test for 1000 sqm for every layer For filling in Plinth 1 test per 250 Sqm.

BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test. For W.B.M./W.M.M.- 1Test per 1000 cum For B.T.- 1Test per Source For BUSG.- 1Test per 200 cum

CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. Upto 5 Cum. -1 Set 6-15 Cum. - 2 Sets 16-30 Cum. - 3 Sets 31-50 Cum. - 4 Sets Above 51 Cum. 1 additional set for every additional 50 Cum.

BASIC TEST OF AGGREGATE. Sieve Analysis test. For Concrete- 1 Test per 200 Cum. For W.B.M.- 1Test per 250 cum For M.P.M./BUSG - 1Test per 100 cum For B.T.- 2 Test per day per plant (Before and After Mix) For GSB- 1Test per 400 cum For W.M.M.- 1Test per 200 cum

BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test. For concrete 1 Test 200 Cum. For GSB/W.B.M./W.M.M. 1 Test per 500 cum For M.P.M./BUSG- 1Test per 200 cum For BM/DBM/BC - 1 Test per 350 cum

FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. Sand - 1Test per Source

BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test. Cement - 1 Test per 150 MT

Concrete Mix Design (With all Tests on basic materials). Mix Design - 1 Test for 500 cum

STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) 1 Test per 5 M.T.

STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress). 1 Test per 10 M.T. (1 for each Dia.)

BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test. Bricks-1 set of 50 Bricks per 50,000 No.

MORTOR Compressive Strength ( Set of 3 Cubes) test. 1 Set per day

STONE/ RUBBLE Crushing Value/ Compressive Strength,Water Absorption & Specific Gravity test. Rubble- 1 Test per source

Flooring of Natural Stone (Kota / Marble / Granite / Tandur etc.) Water Absorption, Specific Gravity Test. Tiles - 1 Set per 2,000 Numbers.

Ceramic Tiles / Vitrified Tiles - Water Absorption, Modulus of Rupture (Set of 6 Tiles) test. Tiles - a Set per 2,000 Numbers.

Aluminium Section Test for Thickness, Mass per Running Metre. 1 Test

Aluminium Section Test on Powder Coating. 1 Test

Paint / Thermo-plastic Paint, Reflectance and Yellownesss index test. 1 Test.

Paint / Thermo-plastic Paint, Flowability (Percentage residue) test. 1 Test.

Paint / Thermo-plastic Paint, Softening point (Ring and Ball method) test. 1 Test.

Paint / Thermo-plastic Paint, Drying Time test. 1 Test.

Soil / Murum C.B.R. Test (Lab) with compaction tect. As required 1 test per 3000 Cu.M.

Soil / Murum Sieve Analysis Test. 1 test for 400 Cu.M.

G.S.B. Mix Design Test. G.s.b. - 1 Test.

Wet Mix Macadam Mix Design Test. W.M.M. - 1 Teat per 500 Cu.M.

Concrete Paving Blocks - Compressive Strength, Water Absorption test (test of 8 blocks)

Royalty - Sand

Royalty - Murum and other material

Super and Vijay Joint Venture

ABHI VIKRAM CONSORTIUM