BARC/MYS/CES/RT/10/2021-22

Amount

Notes:

i) The Contractor is required to visit site for assessing the scope and nature of work before quoting the rates. Contract duration is 12 calendar months; contractor has to deploy men & materials as and when requirement arise based on the instruction of EIC. The quantities indicated are tentative. The entire area may not be available in one time; hence contractor shall be ready for piece by piece work during the entire contract period.

ii) Quoted rates shall be inclusive of providing necessary scaffolding, staging at all height with adequate bracings and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter.

iii)The scope of work includes surface preparations, cleaning the floors after completion of painting work, covering equipments / pipe lines with polythene sheet etc.

iv) All materials shall be of Asian/ Berger or equivalent make. The colour and pattern/ colour combination of the paint shall be got approved from Engineer in charge.

v) Work Permit system, scaffolding checklist system, height pass system, use of safety PPEs by workers & supervisors and other applicable safety procedures for working at heights as per Safety Manual of BARC are compulsory.

Providing and applying renewal coat of painting on old work (one coat) with oil bound washable distemper of M/s Asian Paint or approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying renewal coat of painting on old work (two coat) with oil bound washable distemper of M/s Asian Paint or approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Renewal coat of painting internal plastered /concrete/old painted surfaces with two coats of acrylic premium emulsion paint of approved shade & make i.e. M/s Asian Paint or approved manufacture including preparing the surfaces, filling with putty wherever required, scaffolding and cleaning etc, complete as per specifications, drawings and as directed by the Engineer in charge.

Renewal coat of Painting steel/wood surfaces with two coats of synthetic enamel paint of approved shade & make i.e. M/s Asian Paint or approved manufacture, over one coat of approved wood / steel primer including preparing surfaces, filling with putty wherever required, scaffolding & cleaning cost of all materials, labour etc. at all heights and lifts, all as per drawing, specifications and as directed by Engineer Incharge.

Providing and applying renewal single coat of epoxy primer of approved shade & make i.e. M/s Asian Paint or approved manufacture, over steel / internal wall / floor surfaces, including scrapping and removing of existing old paint by rubbing the surface with carborandum stone / emery paper, scaffolding at all lead & lifts, all as per drawing, specifications and as directed by Engineer Incharge.

Providing and applying two coats (On old / New surfaces) of epoxy paint of approved shade & make i.e. M/s Asian Paint or approved manufacture, over steel / internal wall / floor surfaces, including scrapping and removing of existing old paint by rubbing the surface with carborandum stone / emery paper, applying first coat of epoxy paint, applying touch up trowelling compound over first coat of paint and then applying finishing coat of epoxy painting to the required finish etc complete as directed, including scaffolding at all lead & lifts, all as per drawing, specifications and as directed by Engineer Incharge.

Providing and applying renewal single coat (over internal/external surface) of approved make cement based primer suitable for Oil bound distemper / Plastic emulsion, wherever is required, manufactured by approved manufacturer, such as Asian, Berger or equivalent on internal wall surfaces, including scrapping and removing of existing old paint by rubbing the surface with carborandum stone / emery paper, etc complete as directed, including required & proper scaffolding at all lead & lifts as per specification. ( Primer shall be got approved before use and the decision of the department is final in this regard.)

Renewal coat of painting two coats of water based 100% acrylic exterior emulsion paint of approved shade & make i.e. M/s Asian Paint or approved manufacture over external concrete/masonry/plastered surfaces/ old painted surfaces as antifungal treatment including prior washing of the surface with clean water, removal of dirt, debris etc. at all heights and levels, including surface preparation, materials, labours, scaffolding at all locations and heights with all bye works complete as per manufacturer's specification and direction of the Engineer Incharge.

Removal of existing loose damage concrete from structural members, Removal of rust from steel bars, scrubbing the surface with wire brush, cleaning with water. Providing and applying rust inhabitator as per manufactures specification. Applying approved “Rust Passivator / Inhabitator coat” over the treated reinforcement bars with ratio 1:1 of polymer and cement. Providing and applying Bonding coat to exposed concrete surface with mixture of cement and polymer in ratio 1:1, Providing and applying minimum 20 mm thick SBR based Polymer cement mortar to exposed structural members in ratio 1:5:15 (Polymer:Cement:Sand) and shall be applied in layers as specified by approved manufacturer including preparing surfaces, scaffolding & cleaning cost of all materials, labour etc. at all heights and lifts. (Approved brands are Fosroc/ BASF/ approved equivalent)

Providing plain plaster 20 mm thick, smooth finished in 2 coats in cement mortar 1:5 over external surfaces of masonry & concrete surfaces at all heights and levels with base coat 12 mm thick & finishing coat 8 mm thick final rendering, double scaffolding wherever necessary, hacking of concrete surfaces, curing etc. complete with water proofing compound @ 0.2% by weight of cement in the backing coat all complete as per specifications and instructions of the Engineer Incharge.

12 mm thk. cement plastering for internal walls with cement mortar 1:5 finished smooth, over brick walls or concrete surfaces, including hacking of concrete surfaces, scaffolding curing at all heights and lifts etc. according to specifications, instructions of the Engineer Incharge.

JAIN P MATHEW