Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹37.6 L+₹89,940 (2.45%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹38.0 L+₹1.3 L (3.49%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹38.2 L+₹1.5 L (4.11%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹38.3 L+₹1.6 L (4.49%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN - 65 OF 2022-2023 SPL REP TO QTR NO 83/19, 83/22, 84/06, 84/17, 84/18, 84/22 AND JCO/OR (FAFA) AT KG LINE AND SPL REP TO BLDG NO P - 1 IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE
2022_MES_570041_1
GE (N) P/TOKEN - 65 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹92,000
Yes
18 Mar 2023
19 Dec 2022
21 Jan 2023
19 Dec 2022
14 Jan 2023
2 Jan 2023
20 Dec 2022 - 27 Dec 2022
Amount
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed
M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in sub base complete all as specified and as directed
M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and as directed
M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed
M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and including dismantling of existing floor tiles complete all as specified and as directed
M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and including dismantling of existing floor tiles complete all as specified and as directed
M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing floor tiles complete all as specified and as directed. Make : Kajaria /NITCO/Johnson.
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and as directed
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. Make: JINDAL, TATA, RAVINDRA
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. Make: JINDAL, TATA, RAVINDRA
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed.
S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous china wash hand basin white flat back of bowl size 450 x 3000mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.
S & F in repairs 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed(Minimum weight15mm-90gms
S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and as directed. Make : Prayag/Polytuff.
S&F in repair Sinks drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed
S&F in replacement stainless steel plate rack of size 787mm X 914mm X 254 mm complete all as specified and as directed CAT PART NO:- P-348 of Pryag or of equivalent make as per Appx 'A' as approved by GE
S & F in repairs 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) complete all as specified and as directed
S & F in repairs15mm pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and as directed
S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed
S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed
S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed
Supply and fix in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and as directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE
S&F in repair PVC (SWR) vent cowl of size 110mm bore complete all as specified and as directed
S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fan complete all as specified and as directed
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and as directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and as directed
Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and as directed
S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and as directed. Make: Action tesa, Century, Kitply
S & F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and as as directed. Make: Action tesa, Century, Kitply
S & F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & as directed.
Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as specified and as directed
Demolition of cement concrete of any description and in any position not therwise specifically provided for complete all as specified and as directed
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.
Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator.
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and as directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.
Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.
Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.
Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.
S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specifed and as directed
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specifed and as directed
M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc complete all as specifed and as directed
M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer and 3mm wall care putty complete all as specifed and as directed
S&F Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed
Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as specifed and as directed
Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc.complete all as specified and as directed.
Supply and fix in repair for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.
M/L 2 coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and directed
S&F in repair GI spout pipe medium grade 50mm bore dia of length 450mm set in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) and making good the external portion with CM 1:3 with and including water proofing compound @ 200 ML per bag complete all as specified .
S &F pull it easy dry clothes pulley system of 6 feet long complete all as specified and as directed.Make Eassy dry system private ltd or of equivalent make as approved by GE
Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe linescomplete all as specifed and as directed.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)
M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty watererproofing coating or equivalent complete all as per manufacturer instruction as directed
M & L for aluminium partition powder coated frame for partition, door, window, ventilators/ventilator shutter, snap grid etc. with one or more rebates including joining cleats for fixing etc ( Minimum thickness of powder coating 50 micron) complete all as specified and as directed.
M & L for 6 mm thick Asbestos cement,corrugated or semi-corrugated sheets in roofs,walls,etc and including dismantling of Asbestos cement (corrugated,semi-corrugated,etc.) sheet complete all as specified and directed.
M&L for Mild steel works for Bands, straps or stays for rainwater , hooks ( J hook) and pintle hinges, Plate washer and similar small articles conforming to Fe -290 Gde-E-165 complete all as specified and directed.
M/L for Asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L position suspended false ceiling system using T- grid suspended ceiling grid system. The size of grid shall be 600x 600mm with GI frame work main runner 38x24mmx3600mm, cross tee 25x24x600mm / 25x24x1200mm and wall angle 24x24x2540mm (thickness of the material of 0.30 mm) , using 9mm thick ceiling panel laminated with PVC film on front face and foil back avilable in due drop texture aas per IS -2095, part-I-1996, fixed in the grid of T- grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed by Engr - in- charge ..Make:- Geproc / armstrong.
S&F powder coated aluminium single leaf, two panels, openable door ,half glazed on top using 5.5mm thick tinted glass panes fixed with PVC rubber bidding and glazing clips and bottom both side prelaminated particle board 12mm thick fixed with glazing clips,alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg ,door lock, handle, hanged on aluminium door floor spring, pivots etc etc using aluminium sections etc all as specified and directed. Note :- Catalogue numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) . including taking out old rusted/unsv, structural Aluminium door and removing same from work site complete including necessary cuttings in brick walls complete all as specified and as directed
Dismantling of plain or corrugated steel sheeting any gauge thickness, incl nainital or similar pattern as in eaves board etc complete all as specified and as directed
S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45 to 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
M&L for 75mm thick PCC 1:3:6 C2 as in plinth protection,floor, hardstanding, finish even and smooth without using extra cement complete all as specified and as directed
Excavation in post holes in soft/loose soil n. exc 0.5 cum,getting out,returning,filling in and ramming earth or broken rubble mixed with earth around,in layers n.exc 25cm,complete all as specified and as directed.
M&L for cement concrete in foundation,fillingand mass concrete type B-2 1:2:4 using 40mm graded aggregate as in foundation complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S/F steel work in tubular trusses, purlin, rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed
S&F rolled mild steel sections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and as directed
S&F mild steel plates Fe-410 W(Gde E-250) Quality B (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and as directed
S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white (ETWC) with ‘P’ or ‘S’ trap, white including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe,10 litres capacity PVC flushing cistern low level , valve less, symphonic action type complete with inlet ball valve, float and handle with brackets and plastic water closet seat cover, white, closed pattern with recessed bottom cover and mild steel chromium plated hinge complete all as specified and as directed
S&F in repairs 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and as directed [Make : JAGUAR or equivalent in Plumber/Ess Ess]
S&F PVC(SWR) reducers 110 x 75mm dia complete all as specified and directed
S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screws down screwed for iron pipes or brass ferrule complete all as specified and as directed. Make Johnson VIVA new series Cat Part No; T4808C or equivalent make as per Appex 'A' as approved by GE.
S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15 mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. ( Make:Jaquar or equivalent).
S&F in repair chromium plasted brass stopcock fancy type screwed both ends high pressure for 15mm bore iron pipe or ferrule complete all as specified and as directed (Make : Jaquar or equivalent)
S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe complete all as specified and as directed. Make Johnson Cat part No: S0006C or equivalent make as per Appex 'A' as approved by GE.
S&F in repair cast copper alloy CP Shower arm square 230mm long with flange complete all as specified and as directed by Engr-in-Charge . Make Johnson cat part No: S0001C1 or equivalent make as per Appx "A' as approved by GE.
S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat No ALD-573 or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs chromium plated towel rail 24" long including built in side brackets, complete all as specified and as directed Cat No. 7711 of make Jaquar ' QUEEN'S COLLECTION Series or equivalent as approved by GE.
S&f in repair PVC waste pipe 40mm for Kitchen sink complete all as specified and as directed
M&L Cutting holes into brick / concrete walls built in cement mortar and making good in cement concrete 1:2:4 type B-1 in superficial area n exc 150 sq cm complete all as specified and as directed
S&F in repair Vitreous china urinal,Half stall type , white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws,pointing around urinal back in cement ; flush pipe ,grating and union for discharge pipe including CP urinal spreader for fixing with15 mm dia pipe complete all as specified and as directed
S&F in repair door stopper of stainless steel body and 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and as specified.
M&L for complete removal of existing finish/treatment on walls, preparing surface and make surface free from loose particles, oil stains etc and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed.
M&L for complete removal of existing treatment on walls, preparation of old surfaces of walls, filling cracks and applying 1.5 mm thick white cementitious wall care fine putty (Birla white wall care putty SF or equivalent from JK wall putty) complete all as specified and as directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fxing in position complete all as specified and as directed
M&L for rendering or plastering work 10mm thick on fair faces of brick or concrete surfaces in CM 1:3 on ceiling finised even and smooth (without using extra cement), and preparing new plastered surfaces applying one coat of alkali resistant primer and two coats of oil bound distemper , including taking down existing plaster etc complete all as specified and directed.
M&L for rendering or plastering work 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 on walls finised even and smooth (without using extra cement), and preparing new plastered surfaces applying one coat of alkali resistant primer and two coats of oil bound distemper , including taking down existing plaster etc complete all as specified and as directed.
S&F aluminium powder coated grill of weight not less than 1kg/sqm fixed to aluminium frame with aluminium powder coated beading complete all as specified and as direted.
M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified and as directed make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).
S & F in repair brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, complete all as specified and as directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE
S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat No AEC-1121 or of equivalent make as per Appx 'A' as approved by GE
S&F in repair Toilet paper holder of stainless steel,complete all as specified and as directed Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and as directed.
Material and Labour for machine pressed precast cement concrete coloured glazed interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed.
Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and as directed
S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.45 to 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F of ball valves of 20mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed
S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
M&L coloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified and as directed
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame after chasing in brick / stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
-Ditto- all as per item No 120 above but One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.
-Ditto- all as per item No 120 above but One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
-Ditto- all as per item No 120 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
-Ditto- all as per item No 120 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
-Ditto- all as per item No 120 above but One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed
-Ditto- all as per item No 120 above but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 6 Amps, Single pole two way, one module complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Fixing only serviceable ceiling rose, obtained from item No 135 here-in-after complete all as specified and as directed.
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed
Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing in repair 7 Wat, Aluminum white powder coating, bed side light fitting with Adjustable head for better beam and focus complete with all accessories prewired including provision of flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and as directed. Make Philips Cat No 31437
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces and taking down old unserviceable fitting from existing postion complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ,Halonix cat No HLB-03-10-CW-AL, Havells cat No- LHEXBYPNIN1W010
S & F in repair LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed.
Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: 7W x 1 complete with all accessories prewired all as specified and directed ncluding provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion and making good disturbed surfaces complete all as specified and as directed . Make- Jaquar Cat No JNL-CHR-MB160275541A , Lucker Cat No -LWL 110-1, Haalonix Cat No- HLWB-01-B22
Supply and fixing ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan, bypassing regulator, complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 200 mm sweep, 1600 RPM, Power consumption16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg or Equivalent
Taking down chowkat or frame ( Wooden) / Steel not exc. 1.5 sq. m and removing to store complete all as specified and as directed
Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.
Supply and fix electric water heater, storage type shock proof with Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Glen WH-7055SQWH25LD, Bajaj Model Calenta , Havells Model- Monza Digi (GHWAMJSWH025)
M & L for PVC connection pipe (copper) chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete as all specified and directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
Supply and fixing USB Charger 3000 mA 1 module type complete all as specified and as directed. Make Legrand cat No 677489 or Equivalent in Havells Cat No AHLKGXW002
Supply and fixing TV Coaxial socket and connector 1 module Make Legrand cat No 6774 60 or Equivalent in Havells Cat No AHLKTOG001
S & F PVC rigid non-metallic conduit ISI marked of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
S & F PVC rigid non-metallic conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store from site and fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed.
Supply, passing through pipe and fixing Radio Guide (RG-6 ) flexible Coaxial audio video oxygen free four layer , water proof, solid copper conductor Aluminium -mylar foil and copper braiding, 75 Ohm Impedience cable ( as in connection for Digitial Cable TV) including Gold RCA Sub woofer type Plug, connector Etc. complete all as specified and as directed. Note- PVC Pipe will be measured and paid seperately under relevant item of schedule, however rate for connector shall deemed to be included in the unit rate quoated .
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation / coping of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.
Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE : Earthwork will be measured and paid under appropriate Items.
Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed.
Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, ‘E’ Grade, cross-sectional area 25 Sqmm 4 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connection to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing complete all as specified and as directed. NOTE : Earthworks, cable protection pipe, etc. will be measured and paid under appropriate Items.
NOTE FOR ITEM NO 168 &169 (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 30x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated.
Supply and laying Double Wall Corrugated ( DWC ) HDPE pipes of size 50 mm, chemical resistance, flexible, tough along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.
Supply and fixing LED post top lantern 45 Watt fitting made in die-cast aluminium with innovative glare free indirect lighting distribution & IP 65 protection complete with 3 Mtr GI pipe (medium grade) as in pole of size required to bell mouth of fitting including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required and taking down old unserviceable fitting from existing postion complete all as specified and as directed . Make Bajaj Cat No BRIL 45W LED NW
Supply & Fixing in repair Cable Junction Boxes IP 66/69 “weather proof”, for outdoor installation suitable for cable size 4 core -10 sq.mm of size 130 x 180 x 77mm , with pole mounting kit for cable junction box complete all as specified and as directed . Make Hansel Cat No KF 1000 H
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 16 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed
Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing as in repairs round shape18 watt 220 volts AC recessed type COB-based, round tiltable LED downlight with multiple beam angles (36 ) complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size and PVC Connector junction 4 terminal and taking down old unserviceable fitting from existing postion complete all as specified and as directed. Make- Jaquar Cat No LETS36R018XW
Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired and taking down old unserviceable fitting from existing postion all as specified and directed. Make- Jaquar Cat No KCH-CHR-MB160275541A or equivalent
Supply and fixing LED surface-mounted square panel with aluminium die cast housing 18 Watt fitting including lamp complete with all accessories prewired and taking down old unserviceable fitting from existing postion complete all as specified and directed. Make- Jaquar Cat No LNRO02S018SW or equivalent
Supply and fixing decorative ceiling Black Outside Inside Orange, Metal & Wood Pendant fitting including Lamp: E-27 9W x 1 complete with all accessories prewired and taking down old unserviceable fitting from existing postion complete all as specified and directed. Make- Jaquar Cat No JNL-BLK-SL1000 or equivalent
Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved,and taking down old unserviceable fitting from existing postion complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1200 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO)
S & F Distribution Board sheet metal enclosure TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fix ready made outdoor type heavy duty polymer earth pit chamber box of inner size 300mmx300mmx260 mm with provision of entry glands for earthing strip/ GI pipe and cover complete all as specified and as directed by Engineer-in-Charge. (Note sample is kept in GE Ofiice sample room)
M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Copper strip 20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing
Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +)
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
M/s Akshay Contruction
M/S Eknath agencies
Sai Construction
Pratap enterprises
M/s.BAJRANG CONSTRUCTION
M/s Asrani and sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .