Augmentation of Building Materials for PWD Punja in Central Jail 4, Tihar, New Delhi. SH Supplying and stacking of Materials for annual consumption

Amount

Supply and stacking of following building material of approved brand and manufacture (bearing ISI Mark and full filling relevent standards of ISI specification) at site, sample of each and every material has to be got approved from the Engineer-in-charge in writing before bulk supply and incase of paint, OBD and similar material vouchers are also to be deposited along with material. Payment will be made only after supply of all the material in full and good condition at once. 1.1 Dehradun white lime

Synthetic enamel paint in all shades except black or chocolate shade (4 litre drum) (Berger or equivalent)

Turpentine oil (5 litre cane)

Plaster of Paris (JK Lakshmi, Sakarni)

White Cement (J.K, Birla)

Oil Bound Washable Distemper/Acrylic distemper (20 kg drum) (Berger, Asian, Nerolac)

15mm PTMT Bib Cock (Prayag or equivalent)

Coarse sand (zone III)

Fine sand (zone IV)

Stone Aggregate (Single size) : 20 mm nominal size

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 32 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

Brass full way valve with C.I. wheel (screwed end) 50 mm dia

PTMT push cock 15 mm dia (Prayag or equivalent)

PTMT pillar cock (Prayag or equivalent)

15 mm dia PTMT stop cock(male thread) (Prayag or equivalent)

Polyethylene water storage tank with cover and suitable locking arragement (500,1000 & 2000 litre capacity) (Sintex, Lotus, Star, Sheetal)

100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet

G.I. Pipe (Jindal or equivalent)

15 mm dia metre

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

50mm dia. Nominal bore

Ordinary Portland Cement 43 grade (JK, ACC, BIRLA, SHREE)

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Glue (Fevicol) (4 kg packet)

Putty for wood work

30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage

Bright finished or black enameled mild steel screws 50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 30 mm

Bright finished or black enameled mild steel screws 25 mm

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel bolts and nuts 50x6 mm

Oxidised mild steel butt hinges 125x65x2.12 mm

Oxidised mild steel butt hinges 100x58x1.90 mm

Oxidised mild steel butt hinges 75x47x1.70 mm

G.I. Union 15 mm nominal bore

G.I. Union 20 mm nominal bore

G.I. Union 25 mm nominal bore

G.I. Union 32 mm nominal bore

G.I. Union 40 mm nominal bore

G.I. Union 50 mm nominal bore

Bolts and nuts 16 mm dia 60 mm long

Vitreous china flat back wash basin 630x450 mm

Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724 mm X 578 mm

Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm

Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm

125 mm grating with waste hole

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25

C.I. sluice valve (with caps) class II : 100 mm dia

C.I. sluice valve (with caps) class II : 150 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia

Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - up to 600 mm dia

White cement based putty (J.K., Birla)

Color tube ( Red, Yellow, Blue ) 200 grms

Sand paper of different numbers (50/80/100/200)

Painting Brush (Kapil or equivalent)

Dhoti -4000x1200 mm size

G.I. Socket (Unik, R, KS)

15mm dia. Nominal bore

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

G.I. Elbow (Unik, R, KS)

G.I Nipple (Unik or equivalent)

15mm dia, 50 mm long

15mm dia, 80 mm long

15mm dia, 100 mm long

15mm dia, 150 mm long

15mm dia, 230 mm long

20mm dia, 50 mm long

20mm dia, 80 mm long

20mm dia, 100 mm long

20mm dia, 150 mm long

20mm dia, 230 mm long

25mm dia, 50 mm long

25mm dia, 80 mm long

25mm dia, 100 mm long

25mm dia, 150 mm long

25mm dia, 230 mm long

32mm dia, 50 mm long

32mm dia, 80 mm long

32mm dia, 100 mm long

32mm dia, 150 mm long

32mm dia, 230 mm long

SFRC Gully Trap Cover 300 x 300

Hexa Nipple

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

40mm dia. Nominal bore

Tank Nipple (Unik, R, KS)

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

40mm dia. Nominal bore

G.I. Reducer Socket (Unik, R, KS)

20mm X 15mm dia. Nominal bore

25 mm to any smaller size

32 mm to any smaller size

Soot gola (Pkt of 24 Nos.)

M.Seal

Dye set for Cutting G.I. pipe from

15 mm to 25mm dia

32 mm to 50mm dia

Heck Saw Blade ( Double Sharp )

Acrylic sheet (4mm thick)

PVC Water Tank Cover (500, 100 & 2000 Litre capacity)

G.I. Plug

Welding Rod (make manglam no.10 & 12)

KAILASH CHAND AND SONS

MAA LAKSHMI CONSTRUCTIONS

VIRENDER KUMAR