Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹2.4 L
Closing Date
20 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 3 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Definition Of Similar Work :- Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking/ Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking and Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic Interlocking stations.
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
1. Signalling arrangement in connection with provision of ROB at LC 95T at Km No. 470/2-4 (PPY Yard) over SC Division. 2. Signalling arrangement in connection with provision of ROB at LC 120T at Km No. 522/0-2 (MTMI Yard) over SC Division.
C_SG_36_593
C_SG_36_593
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.4 L
20 Mar 2026
26 Feb 2026
6 Mar 2026
137 items across 4 schedules · ₹1,74,29,507.62 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/T.2378( TO BE INSPECTED BY RITES) | Numbers | 24.00 | 16,216 | 3,89,184 |
| 2 | Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half)( TO BE INSPECTED BY RITES) | Numbers | 4.00 | 8,083 | 32,332 |
| 3 | Supply of 'E'type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest.( TO BE INSPECTED BY RITES) | Numbers | 32.00 | 1,051 | 33,632 |
| 4 | Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 40.00 | 853 | 34,120 |
| 5 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19). ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 48.00 | 195 | 9,360 |
| 6 | Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.( Item unit is Coil) ( TO BE INSPECTED BY RDSO) | Numbers | 100.00 | 1,153 | 1,15,300 |
| 7 | Supply of PVC insulated wire coils, Multi- strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.( Item unit is Coil) ( TO BE INSPECTED BY RDSO) | Numbers | 12.00 | 2,908 | 34,896 |
| 8 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. ( TO BE INSPECTED BY RDSO) | Metre | 1600.00 | 124 | 1,98,400 |
| 9 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge.( TO BE INSPECTED BY RDSO) | Metre | 200.00 | 391 | 78,200 |
| 10 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge.( TO BE INSPECTED BY RDSO) | Metre | 200.00 | 178 | 35,600 |
| 11 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity( TO BE INSPECTED BY RDSO) | Numbers | 100.00 | 220 | 22,000 |
| 12 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. ( TO BE INSPECTED BY RDSO) | Numbers | 200.00 | 31 | 6,200 |
| 13 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF.( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 4,400 | 1,05,600 |
| 14 | QN1-12F/4B, 24 V DC. The interlocking code: ABCDE. ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 4,283 | 1,02,792 |
| 15 | QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 4,738 | 1,13,712 |
| 16 | QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 4,413 | 1,05,912 |
| 17 | QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II). ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 5,062 | 1,21,488 |
| 18 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips). ( TO BE INSPECTED BY RDSO) | Numbers | 24.00 | 5,841 | 1,40,184 |
| 19 | Supply of Terminal Block Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 80.00 | 97 | 7,760 |
| 20 | Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 160.00 | 406 | 64,960 |
| 21 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 -2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set) ( TO BE INSPECTED BY CONSIGNEE) | Set | 600.00 | 703 | 4,21,800 |
| 22 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos.( TO BE INSPECTED BY CONSIGNEE) | Set | 8.00 | 64 | 512 |
| 23 | Supply of Lugs and Eyelets: Aluminium lugs 25 sq.mm of reputed make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 500.00 | 25 | 12,500 |
| 24 | Copper lugs 10sq.mm of reputed make.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 1000.00 | 12 | 12,000 |
| 25 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 5000.00 | 3 | 15,000 |
| 26 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 1000.00 | 6 | 6,000 |
| 27 | Supply of 200 way tag block as per specification IRS: S 77/2006 Rev. 1.0 or latest and DRG. No. SA 24751 or latest.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 4.00 | 1,439 | 5,756 |
| 28 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S IR) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No."14. Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 46,332 | 92,664 |
| 29 | "Supply of Digital multimeter Specifications: digital TRMS 5 Digit 60000 counts with following features Frequency range: 6Hz to 1MHz Frequency mv AC band width: 100KHz AC voltage rage: 1mV-1000V, +/- 0.5% DC voltage rage: 1uV-1000V, +/- 0.05% AC current rage: 1uA-10A, +/- 0.5% DC current rage: 1nA-10A, +/- 0.2% Capacitance range: 1pF-10000uF Datalogging: 32000 Readings Dual display: Available Other features: Temparature messurement, Diode, continuty, Duly cycle measurement, self battery voltage measurement, Low pass filter, Min, Max and Average value recording, Back light, Bar graph, Protective rubber holster. Model no: Rishabh 6016 or Similar"( TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 15,157 | 30,314 |
| 30 | Temporary alternate Gate : Supply of Surface Base 140mm dia. CLS post as per DRG.. No. S 2011/M ( TO BE INSPECTED BY RITES ) | Numbers | 12.00 | 3,476 | 41,712 |
| 31 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 3.5 Meters long"( TO BE INSPECTED BY RITES) | Numbers | 4.00 | 4,442 | 17,768 |
| 32 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 3.5m post as per DRG.. No. SA 23150, S 2033 or latest"( TO BE INSPECTED BY RITES) | Set | 4.00 | 5,226 | 20,904 |
| 33 | "Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest 4.5 Meters long" ( TO BE INSPECTED BY RITES) | Numbers | 8.00 | 4,710 | 37,680 |
| 34 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe. Ladder for 4.5m post as per DRG.. No. SA 23150, S 2033 or latest" ( TO BE INSPECTED BY RITES) | Set | 8.00 | 6,432 | 51,456 |
| 35 | "Supply of Metallic (MS) colour light Signal Unit. 2 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest" ( TO BE INSPECTED BY RITES) | Numbers | 8.00 | 12,998 | 1,03,984 |
| 36 | "Supply of Metallic (MS) colour light Signal Unit. 3 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest" ( TO BE INSPECTED BY RITES) | Numbers | 4.00 | 17,623 | 70,492 |
| 37 | Supply of Battery Charger OF 230V AC / 24- 26-28V DC, 30A capacity as per specification IRS: S 86-2000 Amd. 4 or latest.( TO BE INSPECTED BY RDSO) | Numbers | 2.00 | 55,373 | 1,10,746 |
| 38 | Supply of Electric Key Transmitter (EKT) rotary type complete as per DRG. No. SA 22601/Alt 4 or latest and specification IRS: S 21-2001 Rev. 1.0 or latest. The ward number shall be as specified by the Engineer in- charge.448Nos702756216.00 ( TO BE INSPECTED BY RDSO) | Numbers | 8.00 | 7,027 | 56,216 |
| 39 | Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 16.00 | 563 | 9,008 |
| 40 | Supply of following type of Terminal block of Wago Make or Similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. 24 pair ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 8.00 | 3,240 | 25,920 |
| 41 | Supply of Permanently lubricated HDPE Duct w i t h o u t e r diameter o f 4 0 m m a n d inner diameter o f 3 3 m m a s p e r specification RDSO/SPN/TC/45/2013 Re v i s i o n 2 . 0 . The length o f t h e duc t shall b e 1 km . Tw o end plugs shall be provided along with the drum.( TO BE INSPECTED BY RITES) | Kilometre | 2.00 | 66,223 | 1,32,446 |
| 42 | Supply of Thermo shrink jointing kitforjointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77-2012 Rev. 3 (Amd. ito Amd. 3) or latest. ( TO BE INSPECTED BY RDSO) | Numbers | 12.00 | 3,715 | 44,580 |
| 43 | Supply of VF Transformer 2T assembly of type 2 with impedance ratio 470: 1120 ohms as per specification IRS: TO 76 -2000 with Amd. 1 or latest. ( TO BE INSPECTED BY RITES) | Numbers | 12.00 | 999 | 11,988 |
| Schedule total | ₹30,83,078 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
Correctionslips.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
TenderDocumentROB593updated.pdf
ATTACHMENT
Annexuresfortender.pdf
ATTACHMENT
TenderDocumentROB593updated.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .