COMPREHENSIVE MAINTENANCE TO CERTAIN MD ACCN, MESSES, BILLETS, REPAIR TO SUNKEN FLOORS, WCS, PLINTH PROTECTION, DRAIN, PATH, CULVERT, FENCING AND OTHER MISC WORKS AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down cement plaster on brick or stone walls including racking out joints,hacking for key scrubbing down with water etc, complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for rendering 15mm thick with cement mortar (1:4) on concrete/ brick surfaces, finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement complete all as specified and directed. Note:- WPC shall be measured and paid separetely

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of old treated plastered or concrete surfaces of wall and applying two coats of weather coat/exterior emulsion, complete all as specified and directed.

Removing/cleaning of sand/silt, mud etc under culvert and in the drain of any width and length in soft/loose soil including depositing of removed material from site at a distance exc 900 m but n.exc 1000 m deposited complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate ) as in sub base, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate, finish the surface even & smooth by using extra cement as in flooring, laid in panels, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specificially provided for complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/benching including necessary formwork and finishing of exposed surface, complete all as specified and directed.

Demolition of reinforced cement concrete of any descrption and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 35 mm thick precast (1:2:4 type B-0 using 12.50 mm gradded stone aggregate ) cement concrete jalli including all mouldings set in cement mortar (1:4) complete all as specified and directed.

S&F precast factory made polycrete (SRFC) medium duty perforated drain cover, 100mm thick, rectangular in shape upto 1 sqm area each and set in cement mortar (1:4), complete all as specified and directed.

M & L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm thick Plain cement concrete, 1:2:4, Type B-1(using 20 mm graded stone aggregate) as in floors, paving etc, finishing the surface even and smooth with using extra cement and including use and waste of formwork, complete all as specified and directed.

M&L for 60 mm thick, precast, cement concrete, coloured, interlocking paver block of grade M-35, any shape and size conforming to IS 15658-2006 with grey cement and pigment as in floors / pavements including 30 mm thick sand cushioning, complete all as specified and directed.

M&L for 250X250X50 mm thick, precast, cement concrete, interlocking paver blocks with holes, with grey cement and pigment, laid in well rammed earth in floors / pavements, complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

Dismantling posts or struts (Steel or RCC) any section embedded in concrete, brick work, masonry, etc including taking out embedded portion in concrete, brick work or masonry and making good to disturbed surfaces complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in fixing of angle iron and coping including necessary formwork, complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for providing and fixing concertina spiral coil fencing with punched tape concentina coil 600 mm dia and 6 m max openable length, upto 3 m height of wall with angle iron 'Y' shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m including taking down of old unserviceable concertina coil, complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directed Note : Each line of wire shall be measured.

Supply only Chain link MS Galvanized fencing, any size or type complete all as specified and directed

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Precast cement concrete, PCC, 1:2:4, type B-1 using 20mm graded stone aggregate as in block for road side kerb stone as per sample approved by GE for road side kerb stone, including laying and setting in cement mortar (1:4) including demolition of old PCC kerb stone, complete all as specified and directed.

M&L for preparation of new or previously untreated plastered or concrete surfaces and applying two coats of weather coat over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n. exc 4 Sqm each and removing from site, complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n. exc 2 Sqm each, complete all as specified and directed.

S&F for 1.25mm thick Pressed steel frames of size 105 x 60mm for doors, windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F for 1.25mm thick Pressed steel frames of size 125 x 60mm for doors, windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm, made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F for 35mm thick, 2nd class, hardwood, Plain framed panelled shutters(any No of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers fixed to chowkats, complete all as specified and directed.

S&F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

All as per item No 42 above but 25mm thick for window, ventilatators etc,complete all as speicified and directed.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. MS frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site, complete all as specified and directed.

S&F 100 mm long, Butt hinges, aluminium alloy anodised and fixed, complete all as specified and directed.

S&F 75 mm long, Butt hinges, aluminium alloy anodised and fixed, complete all as specified and directed.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 125mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised, sliding door bolt with hasp ,staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size, quality or description ) from wooden frame, fixed with oil putty or beads area not exc 0.5 Sqm each, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing fixed with beading, complete all as specified and directed.

S&F 5.5 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane, complete all as specified and directed.

S&F Galvanised Mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair Galvanised Mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Supply and fixing in repairs, Harrison rails, 20 mm dia, mild steel chromium plated curtain rail, fixing with brackets, stops, knobs etc, complete all as specified and directed.

S&F Aluminium extruded body, door closer, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws, complete all as specified and directed.

S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair, 12mm thick, prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed to aluminium frame works and similar work as, complete all as specified and directed.

S&F in repair 18/19mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber with lipping, complete all as specified and directed.

M&L for complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris to low lying area outside of MoD land and applying 3 mm thick a layer of wall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on wall complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of oil bound distemper on wall complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of cement base paint on wall complete all as specified and directed.

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of cement base paint on wall complete all as specified and directed.

Material and labour for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off from the MOD land, complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm/450x300x7mm /300x200x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of wall to receive vertical tiles, complete all as specified and directed.

Material and labour for non skid coloured ceramic dark tiles of 7-8 mm thick, area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

Material and labour for fully vitrified Ceramic tiles, 10mm thick, Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

All as per item No 78 above but in vertical surfaces such as skirting, dado and risers including 10 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of wall to receive vertical tiles.

S&F in repair 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down old U/S GI tubing, complete all as specified and directed.

S&F in repair 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, including taking down old U/S GI tubing, complete all as specified and directed.

S&F for 15 mm bore, concealed type, chromium plated, Stop valves, cast copper alloy screwed pressure, screwed both ends for iron pipe for unions and fixed, complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed.

Supply and fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed.

Supply and fixing 15 mm dia ,Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S & F in repairs 15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Supply and fixing in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle,long shank and cup, screwed both ends for iron pipe for unions and fixed, complete all as specified and directed.

S&F in repair shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed, complete all as specified and directed.

Supply and fixing in repair sheet glass, shelf assembly, consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Supply and fixing in repair 10 ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as specified and directed.

S&F for Mild steel work for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc, complete all as specified and directed.

S&F window or ventilators, section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Based steel as per IS 513 "D" qualilty galvanised as per IS 277 with zinc of 120 gms/sqm) glazed and gauged or wire gauge shutter prepare to receive wire mesh to the shutter (double bars powder coated fixed to window frame with screws including necessary fitttings and all builders hardware such as tower bolts and stays etc compelete all as specified and as directed. (NCL type-4000 series (Note : Glass and wiremesh shall be measured and paid separately under respectibve tiems.)

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, sheets etc, complete, drilled for fixing of steel sheeting or other covering. Doors, window etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing, complete all as specified and directed.

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed.

Supply and fixing for anodised aluminium window and ventilator shutters with aluminium grill, side hung type, without sash bars, aluminium section weighing 0.55Kg/RM including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No), complete all as specified and directed.

Supply and fixing for anodised aluminium partition fixed type/ without sash bars aluminium section weighing 0.55kg/RM including necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading, screw etc, complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

Supply and fixing ordinary quality sheet glass 5 mm thick in panels of aluminium door and window etc, fixed with aluminium clip and rubber beading all as specified, n exc 0.5 sqm, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,steel peg stay etc, complete as specified and directed.

Supply and fixing in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm flaps, complete all as specified and directed.

Supply and fixing for double action floor spring, hydraulically regulated made out of minimum 1.25mm thick aluminium allooy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of MS heavy duty and fixed, complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening, preparatory to distempering on surfaces of walls, complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises, complete all as specified and directed.

Material and labour for granite tiles, 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in cement mortar (1:6), complete all as specified and directed.

Material and labour for granite tiles, 20mm thick, machine cut, as in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in cement mortar (1:4) on brick or concrete surface, complete all as specified and directed.

S&F in repair, 500 ltrs capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed(Minimum weight 20 mm - 210 gms), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) above ground floors exc. 15cm thickness, complete all as specified and directed.

S&F Aluminum anodized frame fo doors, windows, ventilators powder coating (Min thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified and directed.

Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required, complete all as specified and directed.

Supply and fixing for powder coated (Min thickness of powder coating 50 micron) aluminium window and ventilator shutters with aluminium grill, side hund type without sash bars aluminium section weighing 0.55Kg/RM including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No), complete all as specified and directed.

S&F for vitreous china squatting pan, Orissa pattern, size 580x440 mm, white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lean concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair, complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or outgoing pipe etc including making good the floor complete including plastic closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

Supply and fixing in repair plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Supply and fixing in repair waste coupling, PTMT, 32mm bore dia of discharge pipe (half or full threaded, minimum weight of 32mm dia 45gms), complete all as specified and directed.

Supply and fixing in repairs waste fittings 32mm dia, brass, CP, for glazed ware sinks, basins etc with long screwed shanks and fly nuts flange end bedded in red lead, complete all as specified and as directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length, complete all as specified and directed.

Supply and fixing in repair brass, chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

Material and labour for Non-Skid, ceramic, dark tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 using 20 mm graded stone aggregate as in plinth protection, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for 100 mm thick Plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in pavement, finished even and fair, laid in panels, complete all as specified and directed.

Supply and fixing in repair 32mm bore PVC waste pipe for WHB, Sink etc, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Providing and applying two coats of Brushbond RFX of FOSROC or equivalent with a fiber mesh sandwiched between two layers of High performance Acrylic polymer modified Cementitious waterproof coating, shall contain a liquid polymer component and a Cementitious powder component, which shall be mixed as per manufacturer’s instructions and applied over prepared concrete surface strictly maintaining the coverage specified by the manufacturer. The applied material of BrushbondRFX or equivalent should have 1.0mm thickness of cured coating membrane shall exhibit properties of static crack accommodation of 1mm according to ASTM-C836 or equivalent terminating the coating at 300mm above FFL .Work shall be executed by Fosroc or equivalent. Authorised applicator Strictly following the Instructions as per Fosroc or equivalent specifications complete including cleaning the surface by wire brushing followed by water jet to remove any laitance are loose flaky particles and including racking out joints, hacking for key, scrubbing down with water etc complete all as per manufacturer’s specification and direction.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetely including making good the disturbed portion/surface, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealed Conduit ( dia not less than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet including continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable of size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.

All as per item No 130 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire.

All as per item No 130 above but for one 3/5 pin socket 5 Amp on independent board with 1.5sqmm wire.

All as per item No 130 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm including continous earthing with multi standred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed. Note:- (For item 130 to 133 ) Cost for making good disturbed surface below existing point wiring taken out vide item No 129 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 130 to 133 as applicable shall be deemed to be included in the unit rate quoted against these items.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and including PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet including continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.

All as per item No 134 above but for one 3/5 pin socket 5 Amp on same board with 1.5 sqmm wire.

All as per item No 134 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire.

All as per item No 134 above but for 3/5 pins socket outlet 15 Amps independent with 4.0 sqmm including continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm.

S&F switch piano, flush type/Bell push, 5 Amps, single pole one way 230 Volts , AC, complete all as specified and directed.

S&F socket, 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC, complete all as specified and directed.

S&F Socket, 15 Amps, flush type,3/ 6 Pin, 230 Volts , AC, complete all as specified and directed.

S&F switch, 15 Amps, flush type, 230 Volts, AC, complete all as specified and directed.

S&F Modular switch, flush type, 5/6 Amps, single pole, one module, white colour, 230 Volts , AC, complete all as specified and directed.

S&F Modular switch, flush type, 15/16 Amps, single pole, one module, white colour, 230 Volts, AC, complete all as specified and directed.

S&F Modular socket, 3 pins combined, 5/6 Amp, flush type (multi purpose), two module, ,230 Volts , AC, complete all as specified and directed.

S&F Modular socket, 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose), two module, 230 Volts, AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for three module way, 230 Volts , AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for four module way 230 Volts , AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for six module way, 230 Volts , AC, complete all as specified and directed.

S&F Ding Dong, door bell, 230 Volts , AC, complete all as specified and directed.

S&F Bell push flush type, 5 Amps, single pole, one way, 230 Volts, AC, complete all as specified and directed.

S&F Modular Bell push flush type, 5 Amps, single pole, one way 230 Volts, AC, complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate, isolated body, surface backlite, 65x50mm, three terminals, 230 Volts , AC, complete all as specified and directed.

S&F modular stepped type, electronic fan regulator, flush type, 2-way 230 Volts, AC, complete all as specified and directed.

S&F stepped type, electronic fan regulator, flush type, 230 Volts, AC, complete all as specified and directed.

S&F Batten holder, PVC/Polycarbonate base / back, suitable for LED lamp, 230 Volts, AC, complete all as specified and directed.

S&F LED Bulbs, 9/10W, B-22, Pin type, 230 Volts, AC, complete all as specified and directed.

S&F PVC Combination Box type complete with switch & socket 5/6 Amp, 230 Volts, AC, complete all as specified and directed.

S&F PVC Combination Box type complete with switch & socket 15/16 Amp, 230 Volts, AC, complete all as specified and directed.

S&F plug top,16 Amp, 3 Pin, 230 Volts, AC, complete all as specified and directed.

S&F plug top, 5 Amp, 3 Pin, 230 Volts, AC, complete all as specified and directed.

S&F AC plug top, 20 Amp, 3 Pin, suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC, complete all as specified and directed.

S&F AC socket, 20 Amp, 3 Pin, suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC, complete all as specified and directed.

S&F single pole and neutral. sheet metal enclosure, with a two pin and earth plug and socket complete with one single pole, 20 amps MCB, complete all as specified and directed.

S&F Skylite, recess mounting,36W, LED 2'x2', luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and taking down old Unserviceable light fittings of any type and any size, complete all as specified and directed.

S&F LED tube light fittings, 20W (4 feet), wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings, complete all as specified and directed.

S&F LED 6000K (2’ feet), 10W, Decorative LED lighting fixture with extruded PVC heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings, complete all as specified and directed.

S&F LED bulkhead luminaire, 10W, decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings, complete all as specified and directed.

S&F LED building secuity light, 25 watt, made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings, complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core, PVC insulated, FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note:- Cost for making good disturbed surface below existing point wiring taken out vide item No 170 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 170 as applicable shall be deemed to be included in the unit rate quoted against these items.

S&F in repairs VTPN, 4 way, double door, prewired distribution board TPN-DPX 125 MCCB, including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's, complete all as specified and directed. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S&F in repairs Distribution board, 4 way, TP&N, Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB, complete all as specified and directed.

S&F in repairs single pole and neutral, sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with busbar , Neutral link, Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways, complete all as specified and directed.

All as per item No 173 above but 8 ways

All as per item No 173 above but 4 ways

S&F MCB, TPN, 63 to 100 Amps, 415V, including all termnials, fitting etc, including taking down, complete all as specified and directed.

S&F MCB, SPN, 40-63 Amps, 240V, including all termnials, fitting etc, including taking down, complete all as specified and directed.

S&F MCB, SP, 06 to 40 Amps, 240V, including all termnials, fitting etc, including taking down, complete all as specified and directed.

M&L for rewinding of exhaust fan of size 250 to 600 mm sweep Including taking down, dismantiling, opening ,descaling, adjustment, re-fixing, cleaning, greasing, painting, replacing minor spares (i.e nut, bolt,washers) and rewinding with proper size enamelled copper wire warnishing (spares mentioned below will be measured and paid separatelly here in after from item No 180 to 183 in Supply only)

Supply only Ball bearing

Supply only Brass bushes

Supply only Exhaust fan louvers complete with nut & bolts etc.

Supply only Exhaust fan blade of any sweep with screws/bolts, nuts.

M&L for servicing,taking down Ceiling fan, Air circulator & wall mounted fans any size and any sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and connecting up complete all as sepecified and directed.

M&L for rewinding of Ceiling fan, Air circulator & wall mounted fans of any size any sweep and any capacity of fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position, complete all as specified and directed. Note:- spares mentioned below will be measured and paid separately here in after from item No 186 to 188 in Supply only

Supply only Ball bearing

Supply only Brass bushes

Supply only 2.5 to 4.0 mfd capacitor

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear chocking due to scaling and refixing in its original location including making all necessary electrical & water connections complete all as specified and directed. Note:- spares mentioned below will be measured and paid separatelly here in after from item No 190 to 191 in Supply only

Supply only Geyser Element Tringular type 1.5 KW.

Supply only Geyser thermostate for 1.5 KW.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including taking down existing, all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

36SHRI RADHEY ASSOCIATES (BID ID -3303638)

M/s SHRI RADHEY BUILDERS (BID ID -3304035)

laxmi enterprises (BID ID -3304307)

NAVEEN KUMAR TYAGI (BID ID -3303540)

High Tech Metal India (BID ID -3304026)