PROVN OF WORK SERVICES FOR UTILIZATION OF RO WASTE WATER SUPPLY AT AF STN MOUNT ABU

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (by using 12.5 mm graded crushed broken stone aggregate) as in levelling course complete all as specified & as directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed cement mortar in CM 1:4 complete all as specified & as directed.

M&L for digital design glazed ceramic tiles in vertical surface of size of each tile 300 x 450 mm and 7 to 8 mm thick fixed to wall with 10 mm thik cement sand mortar in CM 1: 4, set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC Double door frame of size Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening complete all as specified & as directed.

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified & as directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified & as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified & as directed.

S&F 150 mm size, Aluminium handles, cast type, anodised complete all as specified & as directed.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified & as directed.

S&F in repair 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified & as directed.

S&F in repair Brass CP mixer 15 mm for mixing hot & cold water screwed down ofr iron pipe and fixed complete all as specified & as directed.

S&F in repair CP telephonic jet with all fitting and fixture for EWCs complete all as specified & as directed.

S&F in repair vitreous China wash down water closet (EWC) pedestal pattern coloured incl P or ‘S’ trap coloured, seat cover & cement concrete bedding complete all as specified & as directed.

S&F 5000 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top three layer white colour) hoisted and fixed in position all as specified in SSR Part-I of capacity 5000 liters including all accessories complete all as specified & as directed.

Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified & as directed.

M&L for Cement concrete 1:2:4 type B1 (20mm graded aggregate ) as in wall or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundry pillars and posts and mass concrete complete all as specified & as directed.

S&F joist channel angle, tee section, MS pipe, MS square tube, bars, MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-290 Gde E-165 complete all as specified & as directed.

M&L preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified & as directed.

S&F 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings (Elbow, Tee, Coupler, Coupler reducer ,Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc ) jointed with CPVC solvent cement only and fixed to walls and ceiling concealed pipe work or laid in floors with powder coated metal clamp including taking up or down 20 mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.

S&F 20 mm Brass Elbow SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia Brass Elbow (3/4 X ½) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia Brass Tee SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia Brass Tee (3/4 X ½) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia Male Brass Threaded Adaptor (3/4 X ½) (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20mm dia female Brass Threaded Adaptor (3/4 X ½) (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia female Brass Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S&F 20 mm dia BALL VALVE Adaptor Threaded Adaptor (MTA/ MBTA) ) SDR 11 & Plain CPVC SDR 11 complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, excluding 32 mm dia. PVC flushing pipe complete all as specified and as directed.

Supply & Fixing Vitreous China wash basin (WHB), white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets and making good the damaged portion of wall or floor complete all as specified and directed.

Supply only PVC connection 15mm dia 600 mm long with brass fly nut at both ends complete all as specified and directed.

S&F Towel rail 600mm long of brass chromium plated tubular rail 20mm dia D type between flange fixed with including chromium plated brass screws and wooden plastic cleats complete all as specified and as directed.

S&F pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and as directed.

S&F in repair 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Waste coupling suitable for 32mm dia bore of discharge pipe of PTMT (half or full threated) for WHB minium weight 45 gms complete all as specified and directed.

S & F in repair grating doom 100 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed.

S & F PVC 75 mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in Repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed

M&L 110 mm cement concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) junction single, equal or unequal 110mm dia complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and as directed.

S & F 75 mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 20mm bore tubes Medium grade galvanised with all fittings as Tees, bends, etc laid in trenches complete all as specified and as directed.

Decription all as per BOQ ser item No.49.00 here-in-before but of size 25 mm bore

S&F 20mm bore stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends, for iron pipe or for union and fixed complete all as specified and as directed.

Decription all as per BOQ ser item No.51.00 here-in-before but of size 25 mm bore

S&F 40mm dia gate valves gun metal with iron wheel high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

M&L for cement concrete in foundations surfaces filling and mass concrete type C-2, 1:3:6 (by using 40mm graded aggregate crushed broken stone aggregate) complete all as specified and as directed.

S&F single phase copper winded, 220 V, Pump set electric motor driven of capacity 1.5 HP, 2800 RPM, head 50-60 RM with inlet & outlet pipe dia 25mm complete all as specified and as directed.

M & L for construction of brick masonry valve pit chamber of inner dimension 900mmx900x900mm suitable for valves up to 300 mm size, with PCC 1:4:8 type D-2 for foundation, brick masonry in CM 1:6,15mm thick rendering in CM 1:4, mixed with water proofing compound 3% by weight of cement, coping in PCC 1:2:4 type B-1, including necessary excavation & earth work, form work and making steps for getting into depth including provision of MS sheet cover of thickness not less than 2.80 mm on 50 x 50 x 6.0 mm Angle iron frame with locking arrangement, including painting over MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer etc., complete all as specified and as directed.

M.S. ENTERPRISES (BID ID -3399896)