CERTAIN REPAIR TO CENTRAL INSTITUTES UNDER AGE BR-I AT AMRITSAR

Amount

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed.

Taking down Shutters of any description of size not exc 1sqm each ; Complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; Complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete all as specified and directed. . Note: (i) Glass as required shall be measured and paid for separately. (ii) In case, variation in profile dimension provided by contractor is on higher side, no extra payment on this account shall be made to contracotr .

Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators, partition with one or more rebates including joining cleats, rubber neoprene packing for fixing including taking down and removal old Complete all as specified and directed. ( Min. thickness of powder coating 50 micron)

Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) including taking down and removal old complete all as specified and directed. Glass as required shall be measured and paid for separately

Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.including taking down and removal old complete all as specified and directed. .(Min. thickness of powder coating 50 micron). Glass as required shall be measured and paid for separately

Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening ; Complete all as specified and directed.

Taking down aluminium door shutters of area not exc 1 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening ; Complete all as specified and directed.

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading ; Complete all as specified and directed.

Material & Labour for toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required ; Complete all as specified and directed.

Material & Labour for toughned glass 08mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required ; Complete all as specified and directed.

Material & Labour for toughned glass (of any thickness) to frosted by using process of controlled thermal and chemical treatments , Acid-etched glass; Complete of design all as as approved by the user & directed by the Engineer-In-Charge.

Material & Labour for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately ; Complete all as specified and directed.

Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed ; Complete all as specified and directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and directed.

Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm. ; Complete all as specified and directed.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and directed.

Dismantling structural steel work including doors, gates, framed truss etc. ; Complete all as specified and directed.

Dismantling timber scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins, etc any position ; Complete all as specified and directed.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. ; Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises. ; Complete all as specified and directed.

Material and Labour for glazed ceramic coloured designer tiles 450x300mmx7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in cement mortar 1:4 on brick surface ; Complete all as specified and directed. Note: Colour and design of tiles as per approval of Engineer-in-charge.

Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed or bedding layer of cement mortar1:6 complete all as specified and directed.

Supply and Fixing in repairs of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore ; Complete all as specified and directed.

Supply & Fixing in repair vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed.

Supply and Fixing in repair Vanity of size 820x450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore,waste PVC pipe ; Complete all as specified and directed.

Supply and Fixing in repairs15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed.

Supply and Fixing in repairs15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed.

Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed.

Supply and Fixing in repairs Pillar taps mixture 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. ; Complete all as specified and directed.

Supply and Fixing in repairs centre hole wall/WHB mixer cast coppre alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and directed.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down and necessary cuttings, chases and making good in cement mortar 1:3 ; Complete all as specified and directed.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down and necessary cuttings, chases and making good in cement mortar 1:3 ; Complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs and removal ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) , removal ; Complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including, bitumen primer, cleaning surfaces etc ; Complete all as specified and as directed.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete as per manufacrurers instructions all as specified and as directed.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed.

All as per Srl Item No.43 here-in-before but except brick tiles. Note:-Old serviceable tiles obtained from dismantling shall be reused.

Disconnecting existing tanks 1000ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ; Complete all as specified and directed.

Disconnecting existing tanks 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ; Complete all as specified and directed.

Dismantling boarding with frame , any description , fixed in any position with screws. ; Complete all as specified and directed.

Material and Labour Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. ; Complete all as specified and directed.

Supply and Fixing 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including anodised aluminium snap grid 600mmx600mm frame work and apply two coats of oil emulsion distemper over priming coat and preparation of surface Complete all as specified and directed. (Frame work for ceiling shall be measured and paid for separately).

Supply and Fixing Anodised aluminium snap grid 600mmx600mm frame work for false ceiling all as specified ; Complete all as specified and directed.

Supply and Fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over aluminium snap grid 600mmx600mm frame work, or metal frame work and reinforced with G.I. wiremesh (Fillets, metal frame work and G.I. wire mesh paid separately) ; Complete all as specified and directed.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails fancy type, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. ; Complete all as specified and directed.

Supply and Fixing 2mm thick Fibre glass reinforced translucent corrugated/plain sheeting with side lap fixed with coach screw and washer in roof, wall etc. ; Complete all as specified and directed.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof/wall coverings. ; Complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. ; Complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) tiple layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. ; Complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) complete all as specified and directed.

Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately

Material and Labour for point wiring drawn in existing concealed conduit for one three pin socket outlet 5 Amps independent board ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for point wiring drawn in existing concealed conduit for one three pin 5 Amps socket outlet on the same board with other switches ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for point wiring drawn in existing concealed conduit for one light point controlled by two way switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

All a per item No. 58 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly ; Complete all as specified and directed.

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one three pin socket outlet 5 Amps independent board ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one three pin 5 Amps socket outlet on the same board with other switches ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

Material and Labour for surface point wiring for one light point controlled by two way switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. and making good disturbed surfaces with cement mortar 1:3 complete all as specified and as directed. Note : 1. Switch/socket/regulator/lamp holder/ceiling rose etc. shall be measured and paid separately.

All a per item No. 63 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly ; Complete all as specified and directed.

Supply and Fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular socket 6 Amp 2/3 pin combined 2 module ; Complete all as specified and directed.

Supply and Fixing Modular switch flush type one way 16 Amp, 230 volts ; Complete all as specified and directed.

Supply and Fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module ; Complete all as specified and directed.

Supply and Fixing Modular switch bell push switch 6 Amp 1 module ; Complete all as specified and directed.

Supply and fixing ceiling rose 65X50 mm three terminals ; Complete all as specified and directed.

Supply and Fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed.

Supply and fixing in repairs of Ding Dong bell AC 230 Volts ; Complete all as specified and directed.

Supply and Fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts ; Complete all as specified and directed.

Supply and Fixing in repairs for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating including MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. complete all as spcd and directed.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface ; Complete all as specified and directed.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface ; Complete all as specified and directed.

Supply and fixing in repairs MCB single pole 6 to 32 Amps ; Complete all as specified and directed.

Supply and fixing in repairs MCB DP 40 Amps 240V, 10 KA, ; Complete all as specified and directed.

Supply and fixing in repairs 40 to 63 Amps MCB TPN, 415 Volt ; Complete all as specified and directed.

Supply and Fixing in repairs of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). ; Complete all as specified and directed.

Supply and Fixing in repairs ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan ; Complete all as specified and directed. Notes : (i) Provision of making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. (ii) Old retrieved material obtained from this item shall be deposited in MES store yard.

Supply and Fixing in repairs , Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection ; Complete all as specified and directed. Notes : (i) Provision of making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. (ii) Old retrieved material obtained from this item shall be deposited in MES store yard.

Supply and Fixing in repairs LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories ; Complete all as specified and directed.

Supply and Fixing in repairs LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type ; Complete all as specified and directed.

Supply and Fixing in repairs LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts ; Complete all as specified and directed.

Supply and Fixing in repairs SMD/PLUTO NEO LED luminare 36/40 watt 600 x 600 mm 220 V AC LED ceiling light recessed/surface type with high efficiency PMMA diffuser soft glass free light complete with driver ,holders and LED lamps stable for roof/ceiling including fixing arrangements and connecting with copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to light fitting ; Complete all as specified and directed.

Supply and Fixing in repairs decorative Ceiling light 12 watt light fitting LED type with accessories including any type ; Complete all as specified and directed.

Supply and Fixing in repairs 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable ; Complete all as specified and directed.

Supply and Fixing in repairs, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in repairs, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Supply and Fixing in repairs, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.

Supply and Fixing in repairs, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.

Material and Labour for repairs of Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 m distance from earth pit) and testing on completion including necessary excavation and earth work, charcoal dust and salt in alternate layers, 25 mm dia light grade GI pipe, funnel, wire mesh, Concrete 1:3:6 type C-1 for pit and RCC pit cover, watering pipe, bends, elbows etc. Complete all as specified and directed. Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

GEE EMM ASSOCIATES (BID ID -3364633)