Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
21 Aug 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
a)The tenderer must have successfully completed or substantially completed any one ofthe following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated intender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly not arised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The sub-contractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer inwriting.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: -Execution of Any Signalling work.
29 conditions · 14 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022).
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022.
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022.
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022. (Annexure attached).
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc.
Declaration regarding constitution of firm.
Engineers/Personnel.
Performa of Completion Certificate.
All tender conditions shall be strictly complied with as per the Indian Railways Standard General Conditions of Contract (GCC), April 2022, along with all subsequent correction slips issued thereof.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Provision of S&T work in connection with TRR (20.201 Tkm) in BINA-DHO Section along with Renewal of Glued Joints -341 Nos. in BINA-VGLJ, VGLJ-PRN & JHS-MKP Section of Jhansi division.
JHS-N-W-53-26
JHS-N-W-53-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹2.2 L
27 Jul 2026
27 Jul 2026
7 Aug 2026
166 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 82,71,263.34 | ||
| — | 5.00 | — | — | ||
| Supply of Electric Point Machine (Non-Trailable type): 220mm RDSO specification no IRS S-24/2025 Rev 3 or later with following further information throw with interlocking for operation of yard as per RDSO Drg No S-11000 B] connections with nylon insulation conforming Drg No S3454 and clamp point lock RDSO Drg. No 3395 for 60Kg thick Web immunity level of motor for electric Point be of 400V[r.m.s] 50 Hz The external motor shall be Brand AE or latest (Warranty Period : Upto 30 months from the date of delivery). (Inspection Agency:-RDSO). | — | — | — | 5,99,803.85 | |
| — | 15.00 | — | — | ||
| Supply of complete set of Ground Connections for high thurst 220 mm stroke point machine along with insulation as per Drg no RDS0/33454 ALT -B dt 25-01-2023 or latest along with insulation. (Inspection Agency:-RDSO/RITES). | — | — | — | 8,76,150 | |
| — | 5.00 | — | — | ||
| Supply and fixing of GI bend pipe 50 mm dia., 'B'class, for cable entry into Point machine with all accessories. Note: Th is item to be operated independently for those points where Point machines are functional but GI bend pipe is not pro vided. For all other new installation of Point machines, item 06002 of the SOR includes the provision of GI bend pipe. (Inspection Agency:- Consignee). | — | — | — | 15,943.75 | |
| — | 100.00 | — | — | ||
| Supply of earth enhancement material for treatment of earth pits as per Specification No. RDSO/SPN/197/2016 Ver 1.0 or latest.(Inspection Agency:-Consignee). | — | — | — | 12,300 | |
| — | 1.00 | — | — | ||
| Supply And Installation of Mould And Exothermic Powder for 17.2mm Rod To200x25x6mm Copper Busbar(40 nos. per set).(Inspection Agency:-Consignee). | — | — | — | 28,280 | |
| — | 1.00 | — | — | ||
| Supply And Installation of Mould And Exothermic Powder for 35Sqmm PVC Cable to 200 x 25 x 6mm Copper Bus Bar (40 nos. per set). (Inspection Agency:-Consignee). | — | — | — | 28,280 | |
| — | 1.00 | — | — | ||
| Supply And Installation of Mould And Exothermic Powder for copper strip 25x2to Earth Pit for Earth pits interconnection. (40 nos. per set).(Inspection Agency:-Consignee). | — | — | — | 27,270 | |
| — | 1.00 | — | — | ||
| Supply And Installation of Mould And Exothermic Powder for copper strip 25x3 to copper strip 25x3 (40 nos.per set). (Inspection Agency:-Consignee). | — | — | — | 30,300 | |
| — | 300.00 | — | — | ||
| Supply of gauge tie plate insulation complete set each set consisting plate T- 10372 = 1No., Bush T- 10368= 3 Nos. and washer - T-10371 = 6 Nos. The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:-Consignee). | — | — | — | 1,14,582 | |
| — | 400.00 | — | — | ||
| Supply of IRS Type point machine 'P' bracket insulation complete set consisting of the following: - Plate LH-S - 3266 - 1 No, RH - S -3265- 1 No., Plate S - 8804 - 1 No., Bush -S-3199 -4 Nos, Bush S - 8813 - 2 Nos. The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:-Consignee). | — | — | — | 1,92,004 | |
| — | 400.00 | — | — | ||
| Supply of stretcher bar insulation complete set consisting of the following: - Plate-T- 10367-1 No., Bush T- 10368- 3 Nos. and washer-T- 10371 -6 Nos.The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:-Consignee). | — | — | — | 1,52,596 | |
| — | 220.00 | — | — | ||
| Supply of Insulating materials of Ground connection for 220 mm stroke Point Machine as per Drawing No. RDSO/S-3592 (1 No.), RDSO/S-3593 (1 No.),S-23199 (2 No.), S-8640 (4 No.), S- 3463 (1 No.) as per specification No. IRS:S-24/2002 or latest. (Inspection Agency:-Consignee). | — | — | — | 67,760 | |
| — | 20.00 | — | — | ||
| Supply of stretcher bar insulation complete set for Point Machine IRS type 220 mm Stroke clamp type.(Inspection Agency:-Consignee). | — | — | — | 6,383.6 | |
| — | 20.00 | — | — | ||
| Supply of GI OCTAGONAL BOOM THIRD SECTION, FABRICATED FROM GI SHEETS AS PER RDSO/SPN/208/2012 VERSION 2. suitable for Global make EOLB. (Inspection Agency:- Consignee). | — | — | — | 54,280 | |
| — | 20.00 | — | — | ||
| Supply of GI Boom as per RDSO DRG S - 11600 II nd Section of ELB without hand generator Conforming to RDSO Spec. No. RDSO/SPN/208/2012/ Ver 2.0. suitable for Global make EOLB. (Inspection Agency:-Consignee). | — | — | — | 1,27,440 | |
| — | 42000.00 | — | — | ||
| Supply of Channel pins, single groove, 7 mm, galvanised, suitable for 4 mm dia bonding wire for Track Circuit rail bonding, as per RDSO spec.No. IRS: S 17-75. (Inspection Agency:- Consignee). | — | — | — | 1,91,100 | |
| — | 216.00 | — | — | ||
| Supply of Track Lead Junction Box (TLJB),4way,made from FRP, as per Drg.No.20101/M(IRS)or latest, including brass bolts and hylam board sheet with terminal setc. The FRP material shall be as per RDSO spec. RDSO/SPN/151/1997 or latest. The technical specifications are as follows:(a)TLJB complete with cover to be in black/red/grey with all the holes required form ounting on FRP stump (vertical two for each FRP angle)HDPE pipe , cable etc.(b)Each TLJB shall have two bakellite terminal block fitted horizontally, each bakellite terminal block shall have two nickel chrome plate with brass terminal. Along with each TLJB, nickel chrome plated brass links( two nos. of adequate strength for vertical linking of the terminals to be supplied.(c) HDPE pipe along with two nuts for fixing on the TLJB hole .(d) The FRP stump for mounting the TLJB. (Inspection Agency:- RITES/RDSO). | — | — | — | 11,80,448.64 | |
| — | 4400.00 | — | — | ||
| Supply of 8 SWG GI wire (4 mm dia) suitable for Track circuit rail bonding as per RDSO spec. IRS: S 13 - 62. (Inspection Agency:-Consignee). | — | — | — | 3,96,176 | |
| — | 10.00 | — | — | ||
| Supply of Thermo shrinkable jointing kit as per Spec. No. IRS TC. 77/2012(Rev.3 and Amd.3) or latest for all types joints suitable for 6 Quad Jelly filled UG cables for straight through/derivation joints. It includes supply of all accessories, without transformer. (Inspection Agency:-RDSO). | — | — | — | 33,611.5 | |
| — | 10.00 | — | — | ||
| Supply of Track feed Battery Charger as per RDSO Specn. No.IRS: S-89/2013 Ver. 1.0 or latest. Charging capacity rating should be suitable for charging 80 AH Battery. (Inspection by RDSO). | — | — | — | 59,005.6 | |
| — | 20.00 | — | — | ||
| Supply, fabrication and fixing of the Calling On board/BSLB board (Adv)/Stop/Warning board as per as per NCR drawing , or as applicable, on concrete foundation and painting with Retro reflective paint. All work to be carried out as per Railway site engineer instructions. (Inspection Agency:-Consignee). | — | — | — | 1,62,175.6 | |
| — | 120.00 | — | — | ||
| Supply, fabrication and fixing of Retro reflective Signal number plates as per NCR latest practice, on signal post with contractor's own material like clamp, U bolts, nuts etc. (Inspection Agency:-Consignee). | — | — | — | 89,340 | |
| — | 25.00 | — | — | ||
| Supply and installation of earth electrode as per standard practice and as per NCR latest practice. It includes supply of GI pipe of 3 meter length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 meter deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per NCR latest practice). It includes installation of 7 strand GI wires as earth lead wires, supported on MS flat size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS flat to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge. (Inspection Agency:-Consignee). | — | — | — | 83,838.5 | |
| — | 100.00 | — | — | ||
| Supply of Power wire (copper, multi strand) as per IS2465/1984 & IS694/1990(1x10Sq.mm).101Conductors each dia0.45 + 0.01 with insulation thickness of1.2mm nominal conductor resistance1.127 Ohms/Km and test parameters as per site In Charge. (Inspection Agency:-Consignee). | — | — | — | 12,432 | |
| — | 100.00 | — | — | ||
| Supply of 1 x 16 Sqmm (Red/Black/Green) multi strand copper power wire as per IS: 2465/1984 and IS:694:2010 or latest, 101 conductor each dia 0.45 +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. (Inspection Agency:-Consignee). | — | — | — | 14,629 | |
| — | 100.00 | — | — | ||
| Supply of 1 x 25 Sqmm (Red/Black/Green) multi strand copper power wire, Colour of the wire which is required will be specified by the Engineer.(Inspection Agency:-Consignee). | — | — | — | 39,418 | |
| — | 10.00 | — | — | ||
| Supply of Emergency Push Button Switch, with NO/NC as per consignee. Make:- Schneider or similar. (Inspection Agency:-Consignee). | — | — | — | 2,000 | |
| — | 10.00 | — | — | ||
| Supply of LCB Key Switch with 1 NO + 1NC or 2 NO Config. Of ESBEE make (L&T) , Siemens or equivalent suitable to work with Block Panel of Deltron make as per RDSO Spec.No.IRS-S- 105/2012 VER.0 or latest. (Inspection Agency:-Consignee). | — | — | — | 10,000.5 | |
| — | 10.00 | — | — | ||
| Supply of CO2 type fire extinguisher capacity 4.5 Kg capacity ISI marked, with all accessories, operating temperature (-30)° to (50)° for class 13 B type of fi re with 1 meter long hose pipe fitted with PVC bend horn, with carrying handle and wall mounting bracket, complete in all respect. It should conform to IS 2878:2004.Extinguisher certificate has to be supplied along with the item. (Inspection Agency:-Consignee). | — | — | — | 50,502.5 | |
| — | 55.00 | — | — | ||
| Supply of Lead Acid Secondary Cell 2V 300 AH as per RDSO Specification No. IRS-S 88/2004 or latest. Accepted Firm's make & Model: Exide,Luminous,Microtek-T300H-LM or similar branded reputed make. (Inspection Agency:-RDSO). | — | — | — | 4,48,702.65 | |
| — | 13500.00 | — | — | ||
| Supply of PVC insulated, jacketed wire rope for Track lead connections. The wire rope should be of galvanised steel, 6 mm dia, (6x19 stranded wire with steel core of 6 mm) sheathed with PVC.(Inspection Agency:-RDSO/RITES). | — | — | — | 5,87,655 | |
| — | 2.00 | — | — | ||
| Supply of Digital Clamp Earth tester/ meter, with memory storage facility, make Motwane/ Meco/ Fluke/ Stanlay or better. (Model no. MECO4680 or similar or latest) Make and model should be approved by railway representative before supply.(Inspection Agency:-Consignee). | — | — | — | 2,31,687.12 | |
| — | 719.00 | — | — | ||
| Supply of L Bracket insulation made of Nylon 66 as per specification No IRS-S-40-84. One set consisting of materials of 1). insulating plate Drg no S8804=1nos, 2) Insulating Bush drg no S8813=2 nos, 3) Insulating washer drg no S8640-2nos. with proper manufacturer text certificate for materials.(Inspection Agency:-Consignee). | — | — | — | 19,218.87 | |
| — | 9.00 | — | — | ||
| Supply of battery operated Rail Core Drill machine (Eiben stock Make ERD35-2-V50.4 Bor similar) as per RDSO specification no.TM/SM/468 dated 31.03.2014 First Revision, 2017 or latest. Suitable clamp for 52 Kg and 60 Kg rail to be supplied along with each machine. The suitable drill bit for sizes 7.2 mm (Solid drill), 13 mm (Rail HSS Cutter), 14mm (Rail HSS Cutter), 16mm (Rail TCT Cutter), 22 mm (Rail TCT Cutter) to be included as standard accessory in each machine.(Inspection Agency:-RITES/RDSO). | — | — | — | 9,29,781 | |
| — | 31.00 | — | — | ||
| Supply of complete ground fittings galvanized for point machine including insulated stretcher Bar switch extension piece etc and all other accessories required for installation ii) for IRS Point machine (Spec IRS-24/90) a) Turn out (RDSO DRG No. 3361 - 62) Firm's offer accepted - Galvanised point machine cover suitable for IRS Point Machine (143mm) as per drawing no. RDSO/S- 10800 & IRS Point Machine (220 mm) as per drawing no. RDS0/S-11000 & RDS0/5-3395. Make- CGPISL.(Inspection Agency:-Consignee). | — | — | — | 3,19,709.2 | |
| — | 180.00 | — | — | ||
| Supply & Fixing of 113 mm Long MS Bolt (Dia 20 mm) along with spring washer Note:-as per site requirement change in bolt size to be supplied.(Inspection Agency:-Consignee). | — | — | — | 78,300 | |
| — | 60.00 | — | — | ||
| Supply & Fixing of 140 mm Long MS Bolt (Dia 20 mm) along with spring washer Note:-as per site requirement change in bolt size to be supplied.(Inspection Agency:-Consignee). | — | — | — | 29,580 | |
| — | 60.00 | — | — | ||
| Supply & Fixing of 100 mm Long MS Bolt (Dia 23.80 mm Head Side and 20 mm Thread Lower Side) along with spring washer Note:-as per site requirement change in bolt size to be supplied.(Inspection Agency:-Consignee). | — | — | — | 29,700 | |
| — | 30.00 | — | — | ||
| Supply & Fixing of 155 mm Long MS Bolt (Dia 23.80 mm Head Side and 20 mm Thread Lower Side) along with spring washer Note:-as per site requirement change in bolt size to be supplied.(Inspection Agency:-Consignee). | — | — | — | 17,700 | |
| — | 330.00 | — | — | ||
| Supply & Fixing of Specification Of Spring Inserted Reusable Anti Loose Nut. Lock Nut M -020 Specifications: Model No. SP20 Pitch: 2.5 Hn:16.0 Bn:30.0 Cn : 34.6 Ln:28.8 Sn:30.0. Material: STS, S45C, SCM, Plating Electro Zinc Plating, Melted Zinc, Nickel, Chrome, Zinc Powder Plating. Make: SAPER LOCK or higher. Note:-as per site requirement if change in supplied bolt size of above, nut to provided for same suitable size.(Inspection Agency:-Consignee). | — | — | — | 3,30,990 | |
| — | 2.00 | — | — | ||
| Supply of Special Tool for Opener with separate Handle for sch item no A - 36 to A - 40.(Inspection Agency:-Consignee). | — | — | — | 3,400 | |
| — | 2.00 | — | — | ||
| Supply of Special Tool for Opener with attached Handle for sch item no A - 36 to A - 40(Inspection Agency:-Consignee). | — | — | — | 3,800 | |
| — | 520.00 | — | — | ||
| Supply of 9/32 drill bit of high quality suitable for drilling the rail 52kg/60kg with the help of drill machine.(Inspection Agency:-Consignee). | — | — | — | 91,634.4 | |
| — | 14.00 | — | — | ||
| Supply of hand track drill machine (Cycle type) of Make:-Chandra/KI or reputed branded make.(Inspection Agency:-Consignee). | — | — | — | 85,782.62 | |
| — | 250.00 | — | — | ||
| Supply of Disconnect Terminal block for four conductors with screwing cage /clamp type, sliding switch disconnect, as per RDSO spec.No. RDSO/ SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate length of rails for fitting terminal blocks.(Inspection Agency:-RDSO). | — | — | — | 48,180 | |
| — | 162.00 | — | — | ||
| Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 Ver.1.1 Amdt.1 or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer dia,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One couple with suitable rubber O-ring should be supplied with every 6 mtr of pipe length.(The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified.(Inspection Agency:-Consignee). | — | — | — | 98,312.94 | |
| — | 30.00 | — | — | ||
| Supply of deflector plate compatible with 60 kg rail with all hardware accessories for use with Digital Axle Counter as per RDSO/SPN/177/2012 Ver 3.0 or latest. (Inspection Agency :- Consignee). | — | — | — | 2,59,078.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DIPPtendercondition30.05.2025.pdf DIPP
ATTACHMENT
ADVANCECORRECTIONSLIP7.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP8.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP9.pdf
ATTACHMENT
TENDERBOOKLET53-26.pdf
ATTACHMENT
GCC-2022change.pdf
ATTACHMENT
GCC 2022 Correction slip 4
ATTACHMENT
AdvanceCorrectionSlipNo_6.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
RetiredRlyEmployee.pdf
ATTACHMENT
GCCcorrectionslip-5.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf Annexure V and Annexure VA
ATTACHMENT
2021Tele523part13425647.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP10.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GCC 2022 Correction slip 3
ATTACHMENT
GCC2022ACS-3AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-PolicyCorrectionSlipNo.4.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf
ATTACHMENT
DIPPtendercondition30.05.2025.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].