DAY TO DAY MAINTENANCE OF INTERNAL ELECTRIFICATION AT COMD CAMP, CP COLONY, HELIPAD COLONY AND HQ NC AREA UNDER AGE E/M, GE (SOUTH) UDHAMPUR

Amount

Repairing of unserviceable light point, Fan point, socket point 5A/15A, switches, sockets or regulator, light fixtures any type, any type MCBs, DB's and all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with all replacement of any major part but including small length of wires upto 2.5 sqmm single core (not more than 50 cm), adhesive tape and other connected accessories like screws and washers etc. Work shall also include to check and removal of breakages in service connection /sub main of houses as and when directed. The scope of work shall also include cutting of existing Bakelite sheet to accommodate new wiring accessories like switches, sockets, fan regulators etc. complete all as specified and directed. Note: Any major items required to be replaced for this job will be measured and paid under Relevant items of BOQ.

Note:- (a) Contractors representative/Engineer will report to JE E/M/Engr-in-Charge daily at forenoon and afternoon to collect routine/urgent works related to internal electric supply till completion of contract. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job including every type of requisite T&P items to his trades man. All routine/urgent jobs received on job slip will be repaired and got signature of user's and will be deposited to JE E/M with in 24 hrs. In case of any delay in attending the complaint more than 8 hrs after handing over of routine and 2 hrs for urgent works, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.

(b) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Charge more than 12 hrs after handing over works of urgent nature to the contractor. The Engr-in-Charge/JE E/M shall handover the slip containing specification of work to the contractor. The contractor shall attend the job immediately and report to Engr-in-Charge within 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine/urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12 hrs then the facts shall be brought to the notice of the GE/Engr-in-Charge and the period for the working to the complaint shall be decided by the GE/Engr-in-Charge. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs. 20 per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW-2249 and shall be treated as interim condition of the contract and shall enforceable as and delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. The decision of the Accepting Officer is this regard shall be final and binding.

(c) One Complaints slip to be treated as One Complaint irrespective of No. of Repairs mentioned in the same. (d) Contractor to keep his Electrician ready for Urgent Complaints, During odd hours (0600 Hrs to 0900 Hrs and 1700 Hrs to 2200 Hrs) Other than the Regular complaints during working Hrs (0900 Hrs to 1700 Hrs) (e) Procurement of Security gate passes of the Electrician, will be sole responsibility of the Contractor. (f) If the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the govt.

Switch piano flush type SP, one way 5 Amps including taking down old one complete all as specified and directed. Make - Anchor/Havells /Kinjal

Switch piano flush type SP, one way 15 Amps including taking down old one complete all as specified and directed. Make - Anchor/Havells /Kinjal

Switch - socket combination 2-in-1, 5 Amps, flush type including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch - socket combination 5A/16 Amps, 5 in 1 including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Socket outlet 2 in 1, 5 pin, 5 Amps including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Socket outlet, 2-in-1, 5 pin, 5 and 15 Amps flush type combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Two way switch 5 Amps, 230 volts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block including complete all as specified and directed by Engr-in-Charge. Make - Anchor/Havells/Kinjal

Angle lamp holder PVC/Polycarbonate with back plate suitable for fittings including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Bell push 230 volts, AC including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Call bell ding-dong 230 volts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch modular type, 1 module, 6 Amps one way including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Switch modular type, 1 module, 16 Amps one way including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Socket outlet modular type, 2 module, 3 pin, 6 Amps combined including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Socket outlet, modular type, 2 module, 2-in-1, 6/16 Amps combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Two way switch modular type, 1 module, 6 Amps including taking down old one complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Bell push with indicator modular type, 1 module, 6A, including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Fan regulator modular type, 2 module, step type, 100 watts complete all as specified and directed. Make - Anchor/Havells/Kinjal

Fan electronic dimmers 450W, 250V flush type on the existing laminated sheet complete all as specified and directed. Make - Anchor/ Havells /Kinjal

Switch - socket combination 5 Amps, 5 pin multipurpose with PVC Box, 4 holes complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Switch - socket combination 15 Amps, 6 pin multipurpose with PVC Box, 4 Holes complete all as specified and directed. Make - Anchor/ Havells/Kinjal

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 12 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make - Indoasian/Legrand/ Standard Note - MCBs will be measured separately.

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 8 way with double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make -Indoasian /Legrand/Standard Note - MCBs will be measured separately.

Sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make - Indoasian / Legrand / Standard Note - MCBs will be measured separately.

VTPN MCCB DB-Double Door (Including 63 Amp MCCB) 16 kA (as Incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make - Indoasian/ Legrand/Standard Note - MCBs will be measured separately.

MCB Single Pole, 230 Volt, B-Series, Raiting 6 to 32 Amps complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand. Note : MCBs reuired to fix in existing DBs.

MCB Single Pole and Neutral, 230 Volt, B-Series, Rating 40A as Incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

MCB Single Pole and Neutral, 230 Volt, B-Series, Rating 63A as Incoming in MCB SPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

MCB Three Pole and Neutral, 230 Volt, Rating 63A as incoming in MCB TPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 thick as earth electrode burried directly in ground earth plate not less than 2.25 m deep below normal groung level with top edge of earth plate not less than 1.5 m below ground level connected to and including galvnised steel earth lead wire 4 mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed inculding providing earth wire protection pipe GI light grade 15 mm dia from earth plate to main switch board/panal, watering pipe 20 mm dia with mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of characoal dust and salt all around the earth plate, earth work in any type of soil, remaning surplus excavated material all as required at site and specified in EP no 3 of SSR part I 1991 or complete all as specified and directed by Engineer-in-Charge.

LED tube light fitting Garnet 20W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection excluded flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in Wipro/HPL. Note : Flexible cable measured and paid separately.

LED tube light fitting Garnet plus 24W High lumen LED Batten, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using excluded flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in HPL /Wipro, Note : Flexible cable measured and paid separately.

LED tube light fitting Garnet 10W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection with suitable size excluded flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in HPL/Wipro, Note : Flexible cable measured and paid separately.

LED tube light fitting Garnet 5W Batten LED, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection with suitable size excluded flexible cable from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in HPL/Wipro, Note : Flexible cable measured and paid separately.

LED 9 watt Bulk Head Light energy saving with IP65 with opal diffuser, pressure die cast aluminium housing and making all connection with suitable size excluded flexible cable from ceiling rose to fitting including taking down old one complete all as per the directions of Engr-in- Charge. Make - Syska or equivalent make in wipro, C&S. Note : Flexible cable measured and paid separately.

LED Garnet Slim 40 Watt 2 x 2 LED Panel light with diffused optics (590 x 590 mm) complete making all connection with suitable size excluded flexible cable from ceiling rose to fitting including taking down old one complete all as per the directions of Engr-in-Charge. Make - HPL or equivalent make in WIPRO/Havells. Note : Flexible cable measured and paid separately.

LED tube light fitting Garnet plus 36W LED Batten, Housing made of extruded PC with lumen O/P should not be less than 100 lum/ watt making all connection using excluded flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/Havells Note :Flexible cable measured and paid separately.

Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/ colour washing to match with the existing surface complete all as specified and directed.

Point wiring for one light/fan/Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) and 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3 mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead and connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per ser item No 40 but for one light point control by two nos two way switches on independent Board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 40 but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano type on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 40 but for 3 pin 5 Amp Socket outlets point controlled by one switch 5A piano type on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 40 but for 3 pin 15A socket outlet point controlled by one switch 15A on the independent Board with 2.5 sqmm size of copper cable complete all as specified and directed.

Point wiring for one light/fan/Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) and 1.25 mm thick mild steel terminal boxes (Modular Type) concealed in wallsfor fixing of modular switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead and connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr- in-Charge.

All as per ser item No 45 but for one light point control by two nos two way modular switches on independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 45 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Same board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 45 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Independent board with 1.5 sqmm size of copper cable complete all as specified and directed.

All as per ser item No 45 but for 3 pin 15A socket outlet point controlled by one modular switch 16A on the independent board with 2.5 sqmm size of copper cable complete all as specified and directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 6 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm drawing through existing surfacce/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 4 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Sub main wiring with four single core PVC insulated with copper conductor cable stranded of size 4 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Ballast Electronic 28W, suitable for 230V T-5 fiiting FTL 1 x 28W including taking down of old unserviceable ballast complete all as specified and directed. Make : Wipro/Surya/Bajaj

Ballast Electronic 36W, suitable for 230V T-5 fiiting FTL 1 x 36W including taking down of old unserviceable ballast complete all as specified and directed. Make : Wipro/Surya/Bajaj

Capacitor 2.5mfd AC, 415 volt complete all as specified and directed by Engr-in-Charge. Make : Havells/Radson/Epcos

Fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 4 core 10 sqmm nomial cross section in service connection including taking down of old unserviceable service connection from pole to DB complete all as specified and directed.by Engr-in-Charge.

GI tubing light grade 25 mm dia along the wall/ in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

LED street light fitting 20W Garnet with single piece deep drawn AL housing with side reflectors and acrylic cover including fixing arregement in existing bracket complete all as specified and directed by Engr-in-Charge. Make : Wipro or eqiuvalent in Havells/Syska

Modular plate 1 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

Modular plate 2 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

Modular plate 3 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

Modular plate 4 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

Modular plate 6 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

Modular plate 8 module including taking down old unserviceable one complete all as specified and directed. Make : Indoasian/Anchor/ABB

LED 15 Watt Surface Mounting fitting squre type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/Havells

LED 15 Watt Recess Mounting fitting Square type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/Havells

LED 18 Watt PLL 4 pin lamp fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - HPL or equivalent make in Wipro/Havells

Non Retrofit 18 Watt PLL 4 pin/cross pin lamp fitting suitable for recess mounting ceiling light making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make -Wipro or equivalent make in HPL/Havells

Non Retrofit 9 Watt PLL 2 pin lamp fitting suitable for recess mounting ceiling light making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/Havells

Non Retrofit 11 Watt PLL 2 pin lamp fitting suitable for recess mounting ceiling light making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/Havells

LED PEACOCK 12 Watt surface mounting fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in Wipro /HPL

LED Floret surface mounting fitting alongwith LED 9W Lamp with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Havells or equivalent make in Wipro /HPL

LED 3W Recess mounting Mini Downlight round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

LED 5W Recess mounting Mini Downlight round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

LED 7W Recess mounting Mini Downlight round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

LED 12W Recess mounting Slim panel light round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

LED 16W Recess mounting Slim panel light round type fitting with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed. Make - Wipro or equivalent make in HPL/ Havells

Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps nicluding taking down of old one complete all as specified and directed by Engr-in-Charge. Make - Standard/Legrand/Havells

LED Candle Light 3W Base Cap E14/E/27 with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/ Havells/Oshram

LED Candle Light 5W Base Cap E14/E/27 with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/ Havells/Oshram

LED Frosted Light 3W Base Cap E/27 with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/ Havells/Oshram

LED Frosted Light 5W Base Cap E/27 with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/ Havells/Oshram

Twister/Spiral 5watt Base Cap B22/E27 light fitting 6500K/2700K with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells/Oshram

Twister/Spiral 12 watt Base Cap B22/E27 light fitting 6500K/2700K with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells/Oshram Copour Changing downlight 3/5/7W

LED Engagememt 0.5 Watt Safelite Yellow/ Green/Red Base Cap B22 with all necessary fixing arrengement including taking down old one complete all as specified and directed by Engr-in-Charge. Make : Wipro/Havells/Oshram

MCB Three Pole and Neutral, 230 Volt, Rating 100A as Incoming in MCB TPN DB complete all as specified and directed. Make : Indoasian or equivalent make in Havells/Legrand.

Sub main wiring with four single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm drawing through existing surface/recessed steel/PVC conduit of any type and size including PVC insulated copper conductor cable 1.5 Sqmm as earth lead complete all as specified and directed including taking down old sub main wire.

Flexible twisted twin core 0.5 sqmm copper cable suitable for electrical connection from Ceiling rose to fitting including taking down of old one complete all as specified and directed by Engr-in-Charge.

HIMALAYA ENTERPRISES

ARNABH ASSOCIATES

khajuria builders

DEV RAJ MAGOTRA

RAJ MOHD