Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹10.0 L+₹44,845 (4.68%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹11.7 L+₹2.1 L (22.1%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹13.1 L
EMD Value
₹1.3 L
Closing Date
1 Nov 2022, 12:00 pmClosed
Executive Engineer
Executive Engineer, Mataton, Jhansi
Renovation of road back side lake via main garden gate to ball fountain in matatila garden at matatila dam (Total length 0.710Km)
2022_UPIDC_739734_1
03 /E.E./ Matatila/2022-23
Open Tender
Civil Works
Item Rate
15 days
Matatila, Talbehat
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹1.3 L
10 Nov 2022
20 Oct 2022
1 Nov 2022
20 Oct 2022
1 Nov 2022
20 Oct 2022
Amount
Providing, laying, spreading and compacting stone aggregates of specific size (22.4-53) MM to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 (A) as per Technical Specification Clause 405.
Providing and applying tack coat with Bitumen (V.G.-10 Gr.) using Bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
Providing, laying and rolling of open-graded premix carpet by mechanical means of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen (VG-10 Gr.) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of "Type-C" as per Technical Specification Clause 508
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type "C" as per Technical Specification Clause 510
Providing and laying hot applied thermoplastic compound 2.5 MM thick including reflecrorising glass beats @ 250 gms per sqm. Area,thickness of 2.5 MM is exclusive of surface applied glass beats as per IRC :35the finished surface to be level, uniform and free from streaks and holes at site.
Supply and fixing of avery dennison /3M brand RPM series 290 (cat eye) (Red/Yellow colour) made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflection in wet and dry condition with bitumenn adhesive BT 69.Complete
R.R.stone masonary in 1:4 cement sand mortar including all cost of material, labour, T&P etc. complete as per directed by Engineer -in - Charge.
Raised pointing with 1:2 cement,sand mortar including all cost of material, labour, T&P etc. complete as per directed by Engineer -in - Charge.
20.00 MM thick cement Plaster with 1:4 cement, sand mortar including all cost of material, labour, T&P etc. complete as per directed by Engineer -in - Charge.
Supplying and laying P.C.C. 1:4:8 in Road including cast of all labour, material, T&P, lead, lift etc. complete as per directed by Engineer -in - Charge.
Supplying and laying P.C.C. 1:2:4 including all lead and lift, cost of labour, material,T&P , etc complete as per directed by Engineer -in - Charge.
Supply And fixing 75mm dia G.I. Footpath light pole 3.60 m long in 1:3:6 cement concrete foundation including excavation back filling, Red oxide Primer, enamel paint all cost of labour , T&P etc. complete in all respect
Supply and laying aluminum 10 sqm mm shape round conductor P.V.C sheathed cable 110 Volts grouting with T- type bend, MS clamps of suitable size 25mm Dia PVC pipe fitting as directed by Engineer -in-Charge completevin all respects. All mounting will be properly connected with earth conductor by clamp.
Supply and fixing factory wired H.P.F. 36 watt to 46 watt street light with G.I. Bracket fitting complete in all respect of havells/ phillips make as per directed by Engineer -in -Charge.
M/S TULSIRAM AND COMPANY
M/S HARI PRAKASH GUPTA
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .