Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹51.5 LAccepted-AOC A 20 YAMUNA ENCLAVE PANIPAT 132103 | PANIPAT | PANIPAT | HARYANA | 132103 | 1 | Accepted-AOC L1 | |
| 2 | 2₹52.5 L+₹1.0 L (2.02%)Rejected-Finance H NO 08 LATIF GARDEN ASSANDH ROAD PANIPAT | PANIPAT | HARYANA | 132101 | 2 | Rejected-Finance L2 | |
| 3 | 3₹54.0 L+₹2.5 L (4.84%)Rejected-Finance | 3 | Rejected-Finance L3 | |
| 4 | 4₹54.6 L+₹3.2 L (6.13%)Rejected-Finance 2202 BALLAH BALLA 30 KARNAL HARYANA 132040 | KARNAL | HARYANA | 132040 | 4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | The Quality Coop Society Ltd L3 | The Jai Maa Kali Coop Society L4 | The Balraja Coop LC Society Ltd L2 | THE JAI MAHAKALL CO-OP L AND C SOCIETY LTD L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | FRP Multiplay station, capacity 10-25 children, Main Frame-50 NB MS Pipe Class B, Area-7*5mtr., Hand Ralling-20 NB MS Pipe Class B, Ladder Frame-25 NB MS Pipe Class B, Material-FRP, Platform-1.6mtr., Rope Climber-1*2.5mtr., Safe Play area 8*6mtr., Side Chute-4mm FRP, Slide Length-3.0 mtr., Total Height-4.0mtr., Tunnel Climber 32 NB MS Pipe class B with complete fitting on site. | 1 | Each | 1,45,000 ₹1,45,000 | 1,70,000 ₹1,70,000 | 1,65,000 ₹1,65,000 | 1,15,000 ₹1,15,000 Lowest |
| 2.00 | Air Walker: Providing, designing and fixing of Air-Walker of size 100*550*1480mm fabricated with main post og 140mm dia and 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to br applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in Charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum streength M25 and J shaped welded bolts. Including Contractor Profit, overhead charges, GST and all others charges. | 1 | Each | 23,800 ₹23,800 | 2,300 ₹2,300 Lowest | 25,000 ₹25,000 | 23,000 ₹23,000 |
| 3.00 | Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges | 1 | Each | 23,800 ₹23,800 Lowest | 26,000 ₹26,000 | 31,000 ₹31,000 | 26,250 ₹26,250 |
| 4.00 | Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including Contractor Profit, overhead charges, GST and all others charges. | 1 | Each | 28,850 ₹28,850 | 2,200 ₹2,200 Lowest | 10,000 ₹10,000 | 31,750 ₹31,750 |
| 5.00 | Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges. | 1 | Each | 28,850 ₹28,850 | 2,200 ₹2,200 Lowest | 6,000 ₹6,000 | 32,100 ₹32,100 |
| 6.00 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges. | 1 | Each | 18,350 ₹18,350 | 18,000 ₹18,000 | 20,000 ₹20,000 | 16,900 ₹16,900 Lowest |
| 7.00 | Twister:- Providing designing and fixing Twister of size 1700*1300*1300mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welded joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured bt rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved bt Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. Including Contractor Profit, overhead charges, GST and all others charges. | 1 | Each | 21,620 ₹21,620 | 21,000 ₹21,000 Lowest | 26,000 ₹26,000 | 23,100 ₹23,100 |
| 8.00 | Supply of ” PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS : 1554 (PART-I) 1988 / 7098 (Part-I)1988 WITH COPPER CONDUCTOR– ISI MARKED 2.5 sq mm 2 core unarmoured wire Grandlay/Havells/KEI/ Polycab/Plaza/RR Kable | 1 | Metre | 100 ₹100 Lowest | 700 ₹700 | 990 ₹990 | 128 ₹128 |
| 9.00 | `Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12``x15``x5`` Sintex/Semens make pvc insulated pole boxes of suitable size duly lockable including Input and Out Put Connectors Bakelite/Porclein
of 63A Rating and neccessary service cable up to 10 mtr complete with internal copper wiring and installing the same on pole/pedestal with suitle means at hieght desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog 24 Hour Operation (G.E/LandT/Siemens/Indoasian/CandS) Contractor :- 3Pole 32A, 415Volt. (Schnider/LandT/Siemens/Indoasian/CandS), DPMCB :- 40A 2pole. (G.E/LandT/Siemens/Schnider/CandS)` | 1 | Each | 5,000 ₹5,000 Lowest | 5,000 ₹5,000 Lowest | 8,000 ₹8,000 | 6,636 ₹6,636 |
| 10.00 | Mural painting/Graffiti on walls of parks/road sides, electric poles in different colours and shades with weather shield paint by the skilled painters/ fine art artists and with wall Putti/White Wash as a base before the start of work and in complete satisfaction of the engineer-in-charge. | 1,250 | sqft | 55 ₹68,750 Lowest | 70 ₹87,500 | 65 ₹81,250 | 65 ₹81,250 |
Tender Value
₹59.3 L
EMD Value
₹1.2 L
Closing Date
10 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Poonia
Municipal Corporation Panipat
Renovation of Park in front in front of Apna Park as Numbered Park No. 03 in sector 06 in ward no. 26 at MC Panipat ( Rural )
2025_HRY_469693_1
20257E092471 EA1B 46A5 A006 922F1DE2B921286ULB
Open Tender
Civil Works
Works
290 days
Panipat
2 documents required · 2 mandatory
₹5,000
₹1.2 L
Yes
MC Panipat, Devi Lal Complex
23 Sept 2025
3 Sept 2025
10 Sept 2025
3 Sept 2025
10 Sept 2025
3 Sept 2025
4 Sept 2025
Amount
FRP Multiplay station, capacity 10-25 children, Main Frame-50 NB MS Pipe Class B, Area-7*5mtr., Hand Ralling-20 NB MS Pipe Class B, Ladder Frame-25 NB MS Pipe Class B, Material-FRP, Platform-1.6mtr., Rope Climber-1*2.5mtr., Safe Play area 8*6mtr., Side Chute-4mm FRP, Slide Length-3.0 mtr., Total Height-4.0mtr., Tunnel Climber 32 NB MS Pipe class B with complete fitting on site.
Air Walker: Providing, designing and fixing of Air-Walker of size 100*550*1480mm fabricated with main post og 140mm dia and 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to br applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in Charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum streength M25 and J shaped welded bolts. Including Contractor Profit, overhead charges, GST and all others charges.
Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges
Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including Contractor Profit, overhead charges, GST and all others charges.
Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges.
Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges.
Twister:- Providing designing and fixing Twister of size 1700*1300*1300mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welded joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured bt rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved bt Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. Including Contractor Profit, overhead charges, GST and all others charges.
Supply of ” PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS : 1554 (PART-I) 1988 / 7098 (Part-I)1988 WITH COPPER CONDUCTOR– ISI MARKED 2.5 sq mm 2 core unarmoured wire Grandlay/Havells/KEI/ Polycab/Plaza/RR Kable
`Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12``x15``x5`` Sintex/Semens make pvc insulated pole boxes of suitable size duly lockable including Input and Out Put Connectors Bakelite/Porclein of 63A Rating and neccessary service cable up to 10 mtr complete with internal copper wiring and installing the same on pole/pedestal with suitle means at hieght desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog 24 Hour Operation (G.E/LandT/Siemens/Indoasian/CandS) Contractor :- 3Pole 32A, 415Volt. (Schnider/LandT/Siemens/Indoasian/CandS), DPMCB :- 40A 2pole. (G.E/LandT/Siemens/Schnider/CandS)`
Mural painting/Graffiti on walls of parks/road sides, electric poles in different colours and shades with weather shield paint by the skilled painters/ fine art artists and with wall Putti/White Wash as a base before the start of work and in complete satisfaction of the engineer-in-charge.
Providing and Laying of EPDM Synthetic court 15mm ( 9mm SBR plus 6 mm EPDM) including loading, unloading, carriage of material, markings,contractor profit, overhead charges and all taxes complete in all respect.
Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge.
Electric Meter Connection of 5 kw 3 phase from UHBVN complete in all respect Note:- Actual Payment of this item will be made in accordance with payment receipt of UHBVN
SUPPLY, ERECTION testing and commissioning Post Top Coloumn light made of mild steel and have ingress protection for optical compartment. Decorative column light shall be made of Durable Mild Steel with a total height of 3mtr above ground level. The pole bottom section shall be of 150x150x3000mm long with top illuminated part. The base plate shall be of dimension 200x200x10mm. The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole shall be designed with elongated foundation holes for fine alignment of the pole during installation. Fitting shall be made of corrosion resistant zinc plated ERW MS tubular sections. Diffuser of impact resistant PMMA specially design for efficient lighting. Colour tolerance ,3 SCDM to avoid colour deviation. Column light provide Diffused symmetric light without glare. All the LED to be tested LM80 test method. Decorative Column shall be primarily coated with epoxy resin and top coated with UV stabilized powder coat of Black/dark grey. All exterior parts are made of stainless steel. Silicone rubber gasket shall be provided for water protection. 30 Watt Light with output of LED source shall be more than 110lm/ watt, CRI)70, Surge protection 3k, operating voltage 140-270V, wired with Branded LEDs of Osram/ Cree and Fulham or equivalent constant voltage/current driver with efficiency)85%, power factor)0.9, THD(=10%. The CCT of led will be 3000k per as requirement. Led burning of 50,000 hours. Fitting shall be ingress protection of IP65 complete in all aspects with all accessories except foundation bolt. Make: keselec /VAK/Jaquar with 5 year DLP Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finallised for eraction at site.
Bidder Name
Amount
The Quality Coop Society Ltd (GSTN-NA) BID ID -1333470
The Jai Maa Kali Coop Society (GSTN-NA) BID ID -1333393
The Balraja Coop LC Society Ltd (GSTN-NA) BID ID -1333009
THE JAI MAHAKALL CO-OP L AND C SOCIETY LTD (GSTN-NA) BID ID -1333530
The Quality Coop Society Ltd (BID ID -1333470)
The Jai Maa Kali Coop Society (BID ID -1333393)
The Balraja Coop LC Society Ltd (BID ID -1333009)
The Balraja Coop LC Society Ltd (BID ID -1333009)
The Quality Coop Society Ltd (BID ID -1333470)
The Jai Maa Kali Coop Society (BID ID -1333393)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .