Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹38.2 L+₹5.0 L (15.0%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹40.6 L+₹7.3 L (22.0%)Rejected-Finance 245A 7A 1 JAYANTIPUR GOKUL AVAS YOJANA SULEM SARAI ALLAHABAD PRAYAGRAJ | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211011 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹41.5 L+₹8.2 L (24.8%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹48.4 L
EMD Value
₹97,000
Closing Date
23 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
Spl repair to certain bldg. and basketball floor and provn of fresh water connection at old cant Allahabad.
2022_MES_539839_1
8583/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹97,000
Yes
13 Sept 2022
21 Jul 2022
25 Aug 2022
21 Jul 2022
23 Aug 2022
8 Aug 2022
21 Jul 2022 - 28 Jul 2022
Amount
Demolition of reinforced cement concrete as in chajja and similar suspended works, complete all as specified and directed.
Precast reinforced cement concrete as in cover slabs (for manholes) chullah hoods, chajjas, water trough, mangers, shelves and other similar works, type B-1, 1:2:4 using 20 mm graded agg. set in cement mortar 1:4, complete all as specified and directed. Note: Reinforcement to be measured and paid separately.
TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brickwork with flyash bricks, old size straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed.
Brickwork with flyash bricks, old size straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed. [Except brick]
Brickwork with flyash bricks, old size straight or curved on plan to any radius in half brick walls, built in CM 1:4, complete all as specified and directed.
Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid and bedded pointed in cement mortar, complete all as specified and directed.
Demolition of mud/lime concrete in roofs, any thickness, including plastering, old water proofing membrane and and leeping including brick/brick tiles (whether full thickness removed or only a part thereof) and removing the rubbish from site for distance exc 250m but not exc 500m, complete all as specified & directed.
Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), as in roof padding and finishing the surface fair and even, complete all as specified and directed.
Screed bed 10mm thick in CM 1:3, mixed with water proofing compound, over roof slab, finishing the surface even and fair, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.
Cleaning the sunken floor surfaces by wire brushes, brooming, removing dust, including dismantling of floor, lime terracing and applying following :- (a) Bitumen primer confirming to IS-3384-1965 @ 0.50 kg per sq.m. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS – 702-1998 for water proofing membrane. (c) Applying of APP water proofing membrane weight not less than 3 kg / sq.m over entire area with overlaps and sealed all as specified and directed. (d) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg / sq.m over water proofing membrance. (e) Dusting dry sand @ 0.75 kg per sq.m over water proofing membrane.
Cement concrete tiles 250 mm x 250 mm x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with grey cement and no pigments with and including provision of 15mm thick screed bed in CM 1:4 for laying of tiles, complete all as specified and directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store, removing rubbish off the premises, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in vertical surfaces such as skirting / dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 10 mm thick backing coat in CM 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450mm x 300mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.
Baroda Green Marble flooring work, 18 to 20mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.
Baroda green Marble slab 18 to 20mm thick (in full length one piece), as in riser of steps, skirting, dado and pillar, laid over and including provision of backing coat of 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with colouring pigment to match the shade of slab, including rubbing and polishing, complete all as specified and directed.
Granite, 18 to 20mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in CM 1:4, including rounded/ half rounded edges and hole for gas pipe in pre-cast slab, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and othe similar situations, complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.
Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), 25mm thick, as in levelling course, complete all as specified and directed.
Premium quality Non - skid Ceramic ENDURA tiles, coloured tiles 10 mm thick, size of each tile shall be 300mm x 300mm, as in floors., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
PCC (1:3:6) type C-2 using 40mm graded stone aggregate, 75 mm thick, as in flooring, including finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Chequered cement concrete tiles 300mm x 300mm x 25mm thick, with grey cement and no pigment; set, jointed and pointed in neat cement slurry in floors, laid as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75 mm thick, as in plinth protection laid in bays complete including finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only liquid water proofing compound of approved make, complete all as specified and directed.
Rendering 10mm thick, on faces of brick work or concrete surfaces in cement mortar 1:6, finished surface even and fair, complete all as specified and directed.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and fair, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of approved colour over a coat of primer over 1mm thick wall care putty, complete all as specifed and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of exterior weather paint on walls surface over a coat of primer, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer over 1mm thick wall care putty finish, complete all as specifed and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface over a coat of primer, complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Preparation of old decorated plastered surfaces of ceilings including cornices, pilaster etc, by brooming down with steel wire brush, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash on ceilings, complete all as specified & directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in trenches or in floors including earth work, complete all as specified and directed..
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, complete all as specified and directed..
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in trenches or in floors including earth work, complete all as specified and directed..
PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.. .
PVC (SWR) bends / shoe with access door of any radius and 110mm bore, fixed in repair, complete all as specified and directed..
PVC (SWR) bends / shoe with access door of any radius and 75mm bore, fixed in repair, complete all as specified and directed..
PVC (SWR) 75 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) 110 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.
PVC (SWR) vent cowl, 110mm bore, fixed in repair, complete all as specified and directed..
PVC floor trap with grating, plain jointing with solvent cement, 75mm bore, complete all as specified and directed.
Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 110 mm pipe, complete all as specified and directed.
Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 75 mm pipe, complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed wate tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed. [Except tubing]
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed. [Except tubing]
Bib taps, cast copper alloy, chromium plated, long body fancy type, with capstan head, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore, fixed in repair, complete all as specified and directed.
Angle cock, 15mm bore, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes, fixed in repair, complete all as specified and directed.
Water closet squatting pan 'Orissa Pattern' of size 580mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete incl connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, fixed in repair, complete all as specified and directed.
PVC low level cistern, 10 litre capacity, white’ with inlet, float valve including bracket with 32mm dia PVC pipe 600 mm long, fixed in repair, complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with screws, fixed in repair, comnplete all as specified and directed.
Stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, including bedding in cement mortar to dwarf wall, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed.
Vitreous china wash hand basin white flat back of size 550mm x 400mm excluding chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets, including waste coupling of 32mm size, fixed in repair, complete all as specified and directed.
Central hole wash hand basin mixer without popup waste system with 450mm long copper pipes and brass nuts, fixed in repair, complete all as specified and dirceted. Make: Cera Cat Part No F2008461 or techno-commerically equivalent model in any make as approved by GE.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, fixed in repair, complete all as specified and directed.
Stop valves, cast copper alloy, screwed down, high pressure, with capstan headed handle, with long shank and cup screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated (concealed type), 15 mm bore, fixed in repair, complete all as specified and directed.
Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litre capacity, hoisted and fixed in position including necessary fittings such as connection pieces with GI nipple for inlet / outlet & wash out pipes, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density PVC float valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I, fixed in repair, complete as specified & directed.
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore, fixed in repair, complete all as specified and directed.
PVC connection 15mm size with PTMT nuts on both ends of length 600mm, complete all as specified and directed.. Make: Prayag/ Polytuff
Low density ployethene (LDPE) pipes of pressure rating 6 kgf/sqcm, 32mm bore, fixed to walls, ceilings or in floors, complete all as specified and directed.
Low density ployethene (LDPE) pipes of pressure rating 6 kgf/sqcm, 40mm bore, fixed to walls, ceilings or in floors, complete all as specified and directed.
Stainless steel plate rack / utensils rack of size 600mm x 750mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass scres including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R Old Cantt, complete all as specified and directed.
Tubular towel rail brass chromium plated, 20mm dia, 'D' type, 600mm long, fixed with two plugs of second class hardwood embedded in CM 1:3., fixed in repair, complete all as specified and directed.
Stainless steel soap dish fixed to walls, complete all as specified and directed. Make: CERA F5007106 or or techno-commerically equivalent model in any make as approved by GE.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Plain cement concrete type E-2, 1:5:10 (using 40mm graded stone aggregate), as in mass concrete in sunken floors., complete all as specified and directed.
Fancy type drapery rod 20mm dia, stainless steel inlcuding end brackets and side brackets, fixed in repair, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails or any other means, complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified.
Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II, complete all as specified and directed.
Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
Preparation of new steel primed surfaces over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.
PCC type-B-1, 1:2:4 using 20mm graded stone aggregate as in Bed blocks or filling in door frames, including necessary formwork, complete all as specified and directed.
Flush shutters 32 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Aluminium alloy handles, fabricated type, anodised, 150mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.
Stainless steel Butt hinges, and fixed, 100mm size, complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Factory made uPVC white colour Sliding window Three track of area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2(+/- 0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories., complete all as specified an directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
Sheet glass, 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, fixed in repair, complete as specified & directed.
Frosted sheet glass, 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete as specified & directed.
Floor door stopper, 140mm size, of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 300mm size, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), conforming to Fe 410-W (Gde- E-250) quality A, complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar with superficial area n exc 150 sq cm and making good in CM 1:3 or cement concrete 1:2:4, type B-1 (using 20mm crushed aggregate), complete all as specified and directed.
Salt-glazed stoneware gully traps, 150mm x 100mm size, square or round mouthed, type 'P', and setting and jointing in CM 1:1, complete all as specified and directed.
Celuka ply, 18mm thick, of single side prelam/ Rigidlam colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, fixed in repair, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or any other commercially equivalent in make as approved by GE.
Celuka ply, 12mm thick, of plain white (matt finish) colour both sides fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets, fixed in repair, complete all as specified and directed, Make: Rajshri plastiwood/ SYNTEX or equivalent in make as approved by GE.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps (when open), complete all as specified and direcetd.
PVC cabinet with mirror, of size 350mm x 450mm, fixed to wall with screw, complete all as specified and direcetd. Make: Prayag Cat No 551 or techno-commerically equivalent model in Commander/ Neelkamal/ Polytuff as approved by GE.
PVC corner racks of size 300mm x 300mm, 8 mm thick bevelled edges with two CP brackets, fixed in repair, complete all as specified and directed.
Brass chromium plated tumbler holder, fixed in repair, complete all as specified and directed. Make: Jaquar Cat Part No AKP 35741P or techno-commerically equivalent model in any make as approved by GE.
PCC (1:4:8) type D-2 using 40mm graded stone aggregate, 75 mm thick, as in sub base for floor finishes, complete all as specified and directed.
PCC (1:2:4) type B-2 using 40mm graded stone aggregate, 75 mm thick, as in flooring, complete all as specified and directed.
Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner), 20mm thick, complete all as specified and directed.
Supply only metallic hardner, complete all as specified and directed.
Plastic dividing strips, 1.5mm thick, width of strip to be 28mm, complete all as specified and directed.
Preparation of new concrete surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over priming paint plaster coat when unconnected with other painting or when painted in a different tint, complete all as specified and directed.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. -1161- 1979 grade St.-240, complete all as specified and directed.
Preparation of old surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Acrylic basketball pole backboard frame of size 1800 x 1050 x 30mm including basketball ring, complete all as specified and directed.
Excavation in trenches not exceeding 1.5m deep and not exceeding 1.5m wide or area not exceeding 10 sq.m on plan and depth not exceeding 1.5 m for foundation, for shafts, wells, cesspits, manholes, pier holes etc., and getting out in any type of soil, complete all as specified and directed.
Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.
Removing of surplus excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 40mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 50mm bore of pipe, complete all as specified and directed.
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 40mm bore, fixed in repair, complete all as specified and directed.
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 50mm bore, fixed in repair, complete all as specified and directed.
Bib taps, cast copper alloy, long body chromium plated with crutch or butterfly hnadle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, complete all as specified and directed.
Cuttting of CI/DI/GI pipes in position for insertion of new tees, branches, including the required length, complete as specified & directed.
PCC type-B-1, 1:2:4 using 20mm graded stone aggregate as in plinth protection, complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
Taking down switches, distribution boards and old cut-outs etc., of any type and carefully along with the existing boards and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as specified and directed.
Taking down carefully sub-main wiring of any type and any numbers including earthwire surface type / concealed type and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as specified and directed.
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-
One light / fan / exhaust fan point, controlled by one one-way 5Amp switch
One 5 pin, 5 Amp socket outlet on the same board with other switches
One 5 pin, 5 Amp socket outlet point on an independent board.
One light point controlled by two way switch
One bell point controlled by one bell push
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet, 6 pin, 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.
Switch piano, flush type single pole, one way 5/6 Amp 240 volts, white or ivory, ISI marked, complete all as specified and directed.
Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, complete all as specified and directed.
Switch piano, single pole, two way 5 Amp 240 volts, ISI marked, complete all as specified and directed.
Switches, bell push, flush type, 5 amp, fixed in repairs, complete all as specified and directed.
Socket outlet, 5 pin, 5/6 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Socket outlet, 6 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Electric bell ding dong type AC 230 Volt 50 hz single pole, multi music type, ISI marked, fixed in repair, complete all as specified and directed.
Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 65 x 20mm, fixed in repairs, complete all as specified and directed.
Lamp holder, PVC polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.
Ceiling fan regulator flush type, electronic, rotary stepped type, AC 230 V, suitable for any type of ceiling fan, fixed in repair, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 8 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
MCB, SPN, 6 to 32 Amp, 240 Volt, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SP, 6 to 32 Amp, 240 Volt, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
LED mirror light fitting, 1x9W, 6000K decorative indirect up-down light fitting for mirror and wall light application with extruded polycarbonate environmental friendly energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No. IVORY Model No. LHESABP7IN1W009 of Havells or techno-commercially equivalent model in Philips / Crompton
LED bulk head light fittings 1x10 watt having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly, fixed in repairs, complete all as specified & directed. Make : Havell's Cat Part No. HEXAFT10WLED857SSYMBOPC / Bajaj Model Wee Plus Cat Part No. BIBWP10LED or techno-commercially equivalent model in Crompton or Philips as approved by GE.
LED wall mounted tube light fitting, 1x18W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. Make : Havell's Cat Part No. LHEXBHP7INW018 or techno-commercially equivalent model in Crompton or Philips as approved by GE.
Decorative wall light fixture 15W TU retrofit CFL (B-22 base) LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed.
Building security lighting luminaire 36W with unique peanut optics to ensure uniform distribution, hgiher spacing between poles and maintenance free system for city roads and streets, 50% energy saving, IP 66 protection PC and FG cover, high impact resistance complete including LED lamps and all accessories including bracket made out of 25mm bore light grade GI tubing of 1.20metre length bent to shape required and fixed to existing pole or building by means of two Nos MS FI 40mmx6mm clamps with suitable size bolt, nuts and washers and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from fittinge to existing junction boxr of required length, complete all as specified and directed. MAKE:- Cat No. BRP409 LED CW 036 MR FG S1 PSU GR of Philips or Cat No ENDURACITYLITEPLATPLUSSL36WLED757SASYBOPC of Havells or techno-commercially equivalent model in Bajaj / CROMPTON
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25 x 25 x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.5 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Taking down / out existing ceiling fan/ exhaust fan for servicing, greasing, replacement of bearing, safety pin, canopy, fan condensor, clamp, rubber reel, nut / bolts as required at site and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint including down rod of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed..
Taking down / out existing geyser by disconnecting all electric connection and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed..
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 to 32 Amp 240V, fixed in repair, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB
Hi-Tech Constructions
R.K.ASSOCIATES
MS BHAVANA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .