Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹12 L
Closing Date
7 Sept 2026, 12:00 pm
SE EM Circle PWD Kanpur
SE EM Circle PWD Kanpur
Janpad nayalaya kanpur dehat ramabainagar ke antargat mannyee janpad nayadish awam apar janpad nayadish kaksho awam vishram kaksho me vatanukulit sayantro ki apoorti awam esthapana ka karya
2026_CEEMP_1178275_1
1442C/4C-EMC/2026-27 Dt. 17.08.2026
Open Tender
Electrical Works
Percentage
90 days
Kanpur Dehat
3 documents required · 3 mandatory
₹2,354
EE EM Division PWD Kanpur
₹12 L
EE EM Division PWD Kanpur
25 Aug 2026
25 Aug 2026
7 Sept 2026
25 Aug 2026
7 Sept 2026
25 Aug 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Part-A ( Shedule Item ) (Control Panel, Cable etc)
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis indoor/outdoor type Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat B Only. Outdoor type Panel
Incomer :- 1250Amp./415 Volt ACB-1 No..
Outgoing:-1000 Amp /415Volt ACB-01 Nos.
Outgoing:-630 Amp /415Volt ACB-01 Nos.
Outgoing:-400 Amp /415Volt MCCB-01 Nos.
Outgoing:-250 Amp /415Volt MCCB-01 Nos. | 1 | No. | 12,68,211.97 | ₹12,68,211.97 |
| 2 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis indoor/outdoor type Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat B Only. Outdoor type Panel
Incomer (Mains):- 630 Amp. ACB manually operated drwout type ACB with microprocessor based O/L, S/& E/F Protection-1 Set.
Outgoing:- 250 Amp /415Volt MCCB-2 Nos.
125 Amp/415 Volt MCCB-2 No.
100 Amp/415 Volt MCCB-2 Nos. | 1 | No. | 6,36,932.77 | ₹6,36,932.77 |
| 3 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis indoor/outdoor type Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat B Only. Outdoor type Panel
Incomer :- 250 Amp./415 Volt MCCB-1 No..
Outgoing:- 63 Amp /415Volt MCCB-07 Nos., | 2 | No. | 2,93,008.33 | ₹5,86,016.66 |
| 4 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis indoor/outdoor type Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat B Only. Outdoor type Panel
Incomer :- 125 Amp./415 Volt MCCB-1 No..
Outgoing:- 63 Amp /415Volt MCCB-03 Nos. | 2 | No. | 1,41,507.96 | ₹2,83,015.92 |
| 5Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. | |||||
| 5.1 | 1. 400 Sq. mm 3½ core. | 1,900 | R.m. | 2,718.1 | ₹51,64,390 |
| 5.2 | 2. 300 Sq. mm 3½ core. | 315 | R.m. | 2,206.04 | ₹6,94,902.6 |
| 5.3 | 3. 150 Sq. mm 3½ core. | 335 | Mtr. | 1,252.77 | ₹4,19,677.95 |
| 6Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | |||||
| 6.1 | 1. 3½ X 400 sq. mm (82mm) | 20 | No. | 1,191.97 | ₹23,839.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.81 MB
BOQ_2214134.xls
BOQ • 0.34 MB
T2.pdf
Tender Documents • 1.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].