Chhatapipal RD road to Amthimunda road_Road_Pothole repair with PMC and SC,flank dressing0.000 to 2.200

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means.

Construction of embankment with approved material obtained from borrow pits with all leads and lifts, transporting to site with mechanical means with in a lead of 5kms spreading, grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MOSRT&H specification for road and bridge work (4th revision) etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing, spreading and consolidation of moorum with PRR including watering including cost, conveyance, royalty and taxes of all material labour and T&P required for the work etc. complete including 1% Cess as per the direction of the Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision). Pot holes & Depressions

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge BT Surface

Providing & laying SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision) Grading-II

Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 of MORD and as per direction of the Engineer in charge. 600mm & 900 mm dia HPC