Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAdmitted-Finance | ₹29.9 L | L1 | Admitted-Finance |
| 2 | L2₹33.7 LAdmitted-Finance 114 SHASTRI NAGAR MEERUT | MEERUT | UTTAR PRADESH | 245206 | ₹33.7 L | L2 | Admitted-Finance |
| 3 | L3₹43.8 LAdmitted-Finance | ₹43.8 L | L3 | Admitted-Finance |
| 4 | L4₹43.9 LAdmitted-Finance | ₹43.9 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | vardhman traders L1 | JAIN TRADERS L2 | F.M. KHAN SONS L3 | Khatri Trunk Factory L4 |
|---|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) Material obtained from demolition/dismantled and the serviceable material (other than reused in the work) shall be the property of the Govt and shall be removed and deposited in the MES Store Yard without any extra cost to Govt. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated Group-I category makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. | |||||||
| 1.00The following repairs shall be carried out to PEG TABLE after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No :-FD-277 & 384 | |||||||
| 1.01 | Top made out of 17/18 mm thick pre-laminated MDF board (size of 450mmx300mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY | 440 | Each | 190 ₹83,600 | 210 ₹92,400 | 275 ₹1.2 L | 200 ₹88,000 |
| 1.02 | Leg (50mmx30mm of 380mm High) and as per drg | 40 | Each | 30 ₹1,200 | 40 ₹1,600 | 70 ₹2,800 | 100 ₹4,000 |
| 1.03 | Rail (20mm x40mm of 410mm long) and as per drg | 120 | Each | 30 ₹3,600 | 50 ₹6,000 | 80 ₹9,600 | 75 ₹9,000 |
| 1.04 | Rubber/PVC shoes (along with screw) and as per drg | 300 | Each | 3 ₹900 | 5 ₹1,500 | 5 ₹1,500 | 1 ₹300 |
| 1.05 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed. | 440 | Each | 30 ₹13,200 | 40 ₹17,600 | 90 ₹39,600 | 50 ₹22,000 |
| 2.00The following repairs shall be carried out to TEAPOY after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- : Drg No:- FD-278 & 382 | |||||||
| 2.01 | Top made out of 17/18 mm thick pre-laminated MDF board (size 450mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY | 132 | Each | 325 ₹42,900 | 370 ₹48,840 | 400 ₹52,800 | 300 ₹39,600 |
| 2.02 | Leg (30mm x 60mm of 540mm high) and as per drg | 24 | Each | 40 ₹960 | 50 ₹1,200 | 90 ₹2,160 | 100 ₹2,400 |
Updated dates
Tender Value
₹45.0 L
EMD Value
₹89,980
Closing Date
23 May 2026, 6:00 pmClosed
GE (A) Suratgarh
Suratgarh Mil Stn
REPAIR AND POLISHING TO WOODEN FURNITURE AND OTHER ITEMS UNDER GE (A) SURATGARH AT SURATGARH MIL STN
2026_MES_761885_1
GE (A) SOG Token No 04/26-27
Open Tender
Miscellaneous Works
120 days
GE (A) Suratgarh
Please refer the tender documents
8 documents required · 8 mandatory
₹500
GE (A) Suratgarh
₹89,980
Yes
2 Jun 2026
24 Apr 2026
25 May 2026
24 Apr 2026
23 May 2026
9 May 2026
The following repairs shall be carried out to PEG TABLE after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No :-FD-277 & 384
Top made out of 17/18 mm thick pre-laminated MDF board (size of 450mmx300mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY
Leg (50mmx30mm of 380mm High) and as per drg
Rail (20mm x40mm of 410mm long) and as per drg
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall be carried out to TEAPOY after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- : Drg No:- FD-278 & 382
Top made out of 17/18 mm thick pre-laminated MDF board (size 450mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY
Leg (30mm x 60mm of 540mm high) and as per drg
Rail (20mm x50mm of 480mm long) and as per drg
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall be carried out to TEAPOY after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- : Drg No:- HFD-2041
Top made out of 17/18 mm thick pre-laminated MDF board (size 600mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE CENTRE after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No:- FD-29,235 & 274
Top made out of 17/18 mm thick pre-laminated MDF board (size 450mm x 900mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY
Leg (30mmx60mm of 400 high) and as per drg
Long Rail (20mmx50mm of 780mm long) and as per drg
Short Rail (20mmx50mm of 410mm long) and as per drg
Centre stiffener (20mmx50mm of 410 long) and as per drg
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE WRITING after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No.: FD-275, FD-268
Top made out of 17/18 mm thick pre-laminated MDF board (size 1145mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make: ACTION TESA/CENTURY PLY /KIT PLY
Leg (25mmx55mm of 760mm long) and as per drg
Long Rail (25mm x50mm of 760mm of long) and as per drg
Centre stiffener (25mmx50mm of 1095mm of long) and as per drg
Rubber/PVC shoes (along with screw) and as per drg
Drawer (as per drg) and as per drg
Cabinet door fix with piano type hinges (as per drg)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE 3X3 after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No:- FD-291
Top made out of 17/18 mm thick pre-laminated MDF board (size 900mmx900mm) with teak wood edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY /KIT PLY
Leg (35mm x 60mm of 760mm long) and as per drg
Rails ( 20mmx50mm of 830mm long) and as per drg
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE 3X2 WITH & W/O DWR after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No: FD-284, FD-283
Top made out of 17/18 mm thick pre-laminated MDF board (size 900mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make- ACTION TESA/CENTURY PLY/ KIT PLY
Leg (30mmx60mm of 760mm long)and as per drg
Long Rail (20mmx60mm of 780mm long) and as per drg
Short Rail (20mmx60mm of 540mm long) and as per drg
Centre stiffener (20mmx60mm of 540 long) and as per drg
Drawer (as per drg)
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE 2X2 after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No : FD-293
Top made out of 17/18 mm thick pre-laminated MDF board (size 600mmx600mm) with teak wood edging all around of color & texture as approved by GE. Make- ACTION TESA/CENTURY PLY/ KIT PLY
Rubber/PVC shoes (along with screw) and as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE DINNING FOR 06 PERSONS after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No:FD-239,273 & FD/MAP-II/03
Top made out of 17/18 mm thick pre-laminated MDF board (size 1500mmx900mm) with teak wood edging all around of color & texture as approved by GE. Make- ACTION TESA/CENTURY PLY/ KIT PLY
Leg (90mmx45mm of 750mm long) and as per drg
Long Rail (45mmx90mm of 1320mm long) and as per drg
Short Rail (45mmx90mm of 810mm long) and as per drg
'L' shape Zinc plated flat iron size 50mm x 100mmx5mm thich to table between legs and rails fixed with screw.
Stiffener (90mmx25mm of 810mm long) and as per drg
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE DINNING FOR 08 PERSONS after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No: FD-239,273 & FD/MAP-II/03
Top made out of 17/18 mm thick pre-laminated MDF board (size 1800mmx900mm) with teak wood edging all around of color & texture as approved by GE. Make- ACTION TESA/CENTURY PLY/ KIT PLY
Leg (90mmx45mm of 750mm long) and as per drg
Long Rail (45mmx90mm of 1320mm long) and as per drg
Short Rail (45mmx90mm of 810mm long) and as per drg
'L' shape Zinc plated flat iron size 50mm x 100mmx5mm thich to table between legs and rails fixed with screw.
Stiffener (90mmx25mm of 810mm long) and as per drg
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to TABLE DINNING 4 PERSON after removing old UNSV parts and replacing with new parts of well-seasoned good quality of Hard wood free from pits & knots as under all as directed by Engr-in-Charge:- Drg No:: FD/MAP-II/03
Top made out of 17/18 mm thick pre-laminated MDF board (size 1200mmx900mm) with teak wood edging all around of color & texture as approved by GE. Make- ACTION TESA/CENTURY PLY/ KIT PLY
Leg (90mmx45mm of 750mm long)
Rail (45mmx90mm of 810mm long)
'L' shape Zinc plated flat iron size 50mm x 100mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to BED PLY TOP items carefully without disturbing the adjoining parts and providing new components of good quality of hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge. Drg No: FD- 264
Centre Stiffener (40x60x850mm long)
Long Rail (50mmx100mm of 2000mm long)
Short Rail (50mmx100mm of 910mm long)
Veener ply for Head rest / Foot rest as per exisiting size
Top made 12mm thick plywood commercial type BWR (1974mmx824mm) Make: CENTURY PLY (SANIK BWR IS 303) / ARCHID (GOLD BWR GRADE IS 303) / KITPLY (Vista BWR Grade IS 303)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
The following repairs shall carried out to SIDE BOARD after removing old UNSV parts and replacing with new parts of MDF board in shade & texture as approved by Engr-in-Charge:- Drg No : FD-26,371 & 372
Side (18mm thick Prelaminated MDF board of 445mmx635mm)
Back 12mm thick BWR ply comertial grade.
Shelves (18mm thick Prelaminated MDF Board 883mmx426mm)
Drawer (as per drg)
Door (as per Drg)
Top (18mm thick Prelainated MDF board size of 1220mmx445mm)
Knobs as per approved sample.
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR DINING JCO/OR items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD/MAP-II/05
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Leg stiffener (20mmx25mm 440mm long)
Front legs (30mmx55mm of 460mm Long)
Rear Legs(30mmx55mm of 460mm Long)
Rails (30mmx60mm of 430mm long)
Rubber/PVC shoes (along with screw)
PVC seat 4mm thick with holes & screwed with frame as per drg.
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR DINING items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No : FD-279
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Leg stiffener (20mmx25mm 440mm long)
Front legs (30mmx55mm of 460mm Long)
Rear Legs(30mmx55mm of 460mm Long)
Rails (30mmx60mm of 430mm long)
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR DINING IA items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No :HFD-2030/2032
Seat of Chair fix with 50mm thick not less than 28 density cushion on existing ply with approved colour tepastry cloth and as per drg.
Leg stiffener (20mmx25mm 440mm long)
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR EASY items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No :HFD-2034
Seat&Back of Chair fix with 75mm thick not less than 28 density cushion on existing ply with approved colour tepastry cloth and as per drg.
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR BOTTOM WOODEN items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD-279
Seat of 6mm thick BWR ply as approved and as per drg & directed by Engr-n-Charge
Leg stiffener (20mmx25mm 440mm long)
Front legs (30mmx55mm of 460mm Long)
Rear Legs(30mmx55mm of 460mm Long)
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR EASY items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD-17 & 229
Front Legs (leg out of 55mmx25mm of 355mm long as per drg)
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Arms (65mmx25mm of 610mm long)
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR WRITING items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No:-FD-280,261,20 & 148
Back rest stiffeners (50mmx25mm of 470mm long)
Leg Stiffener (25mmx20mm of 530mm long)
Front Legs (55mmx30mm of 660mm long)
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rails (30mmx65mm of 535mm long)
Arms (60mmx25mm of 470mm long)
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR DINING LONG BACK items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No :-FD-357
Cusioned Back rest (50mm thick not less than 28D density form with rexine as approved color on existing ply & as per drg)
Cusioned seat (75mm thick not less than 32 density form with rexine as approved color on seat with exisiting ply & as per drg)
Leg stiffener as per drg
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR DINING OFFICERS items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No : FD/E6/MAP/10, FD/MAP-II/04
Back rest vertical stripes as per drg
Cusioned seat (75mm thick 32 density form with fabric on seat with existing ply & as per drg)
Leg stiffener as per drg
Front legs as per drg
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rails as per drg
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to SOFA SET 5 SEATER items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No : FD-373, 1113 & 281
Cushion 100 mm thick 32 density of Make- Kurlon (Model -Hero HR ) or techno commercial equivalent and covered with tapestry cloth as approved as specified & as directed by Engr-in-Charge.
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to SOFA SET 4 SEATER items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No : FD-373, 1113 & 281
Cushion 100 mm thick 32 density of Make- Kurlon (Model -Hero HR ) or techno commercial equivalent and covered with tapestry cloth as approved as specified & as directed by Engr-in-Charge.
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken components to TABLE BED SIDE OR items carefully without disturbing the adjoining parts and new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD-28 / FD-210
S&F back of Bed Side OR made by 12 BWR ply comertial grade as per Drg and directed
S &F of Sides of the Bed side made by 17/18mm Pre laminated MDF board as per the drg and directed
S&F of shelves of the table bed side made by 17/18mm pre laminated MDF board coverd the front face with teak wood beading as per drg and directed.
S&F of top/bottom of the table bed side made by 17/18mm pre laminated MDF board coverd the front face with teak wood beading as per drg and directed.
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken components to TABLE BED SIDE MAP items carefully without disturbing the adjoining parts and new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD/E6/MAP/15(R)
S&F back of Bed Side made by 12 BWR ply comertial grade as per Drg and directed
S &F of Sides of the Bed side made by 17/18mm Pre laminated MDF board as per the drg and directed
S&F of drawers of the table bed side as per drg and directed.
S&F of cabinet drawer of the table bed side as per drg and directed.
S&F of top of the table bed side made by 17/18mm pre laminated MDF board coverd the front face with teak wood beading as per drg and directed.
S&F bottom of Bed Side OR made by 12 BWR ply comertial grade as per Drg and directed
S&F of SS handle for Drawers fix with screws as per drawing
PVC shoes
The following repairs shall carried out to BIN MULTI PURPOSE after removing old UNSV parts and replacing with new parts of MDF board in shade & texture as approved by Engr-in-Charge:- Drg No: FD/E6/MAP/09
S&F of Side (18mm thick Prelaminated MDF board of 445mmx635mm)
S&F of Back 12mm thick BWR ply comertial grade.
S&F of Shelves (18mm thick Prelaminated MDF Board 883mmx426mm)
S&F of Drawer (as per drg)
S&F of Door shutter (as per Drg)
S&F Top (18mm thick Prelainated MDF board size of 1220mmx445mm)
Knobs as per approved sample.
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to CHAIR EASY CUSIONED items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD-358
'L' shape Zinc plated flat iron size 25mm x 50mmx5mm thich to table between legs and rails fixed with screw.
Rubber/PVC shoes (along with screw)
S&F of Seat of 75mm thick 28D cushion fix with existing ply covered with tapestry cloth as approved by Engr-in-charge dest all as per drg
S&F of back of not less than 50mm thick 28D cushion fix with existing ply covered with tapestry cloth as approved by Engr-in-charge rest all as per drg
Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching & shall be polished with existing shade complete all as specified and as directed.
Supply & fixing of following existing old broken wooden components to DRESSING MIRROR GENTS items carefully without disturbing the adjoining parts and new components of good quality of well seasoned hard wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. Drg No: FD/E6/MAP/16
S&F of back of Dressing mirror Gents cabinet with 12 BWR ply as approved make and as per drg and directed by Engr-in-Charge
S&F of Side of Dressing mirror cabinet with 17/18mm MDF board as per drg and directed by Engr-in-charge
S&F of top & bottom of Dressing mirror cabinet with 17/18mm MDF board as per drg and directed by Engr-in-charge
S&F of Shelves with holder and Shelves shall be not less than 6mm transparant acrylic sheet as per the drg.
S&F of looking mirror size 1200x600mm packed with existing ply and coverd with MDF board as directed by Engr-in-Charge
Supply of legs for dressing mirror size of 38x38mm Hard wood with 38x112x112 brackets as per drg and directed by Engr-in-Charge
RECANNING TO VARIOUS TYPES OF CHAIRS
Removing the existing unserviceable cane plastic from the chair and recaning the dining chairs with plastic cane 2mm to 2.5mm wide. The caning shall be done only after repairing & polishing as stated above complete all as specified & directed by Engr-in-Charge.:- Chair Dining:- FD-279,262,228,1105
Removing the existing unserviceable cane plastic from the chair and recaning the chair writing with plastic cane 2mm to 2.5mm wide. The caning shall be done only after repairing & polishing as stated above complete all as specified & directed by Engr-in-Charge.:- Chair Writing:-FD-20(M) ,261,280,250,1107
Removing the existing unserviceable cane plastic from the chair and recaning the fchair easy with plastic cane 2mm to 2.5mm wide. The caning shall be done only after repairing & polishing as stated above complete all as specified & directed by Engr-in-Charge.:- Chair Easy:-FD-229,17,358
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
Tender04.pdf
Tender Documents • 0.73 MB
BOQ_853439.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid