15th FC - Tied Grant 2024-25 1st Instalment - Arasiramani Town Panchayat-Salem District

Amount

Construction of Pedestal for HDPE Tank with Earth Work for pedestal foundation of 0.15M Depth and PCC 1:4:8mix with 40mm HBG metal with 0.15M depth for pedestal Foundation. Brick Work in Cement Motor 1:5 using country bricks for super structure to a height 0.80Meter to the Entire area of the pedestal should be plastering in Cement Mortor 1:5 12mm thick. After Plastering surface should be paint with approved quality cement paint including cost and conveyance and all labour charges for mixing laying quring for standard specification.

2000 lit., Pedestal

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

2000 lit., HDPE Tank

Supply and delivery of following pipe line (with ISI mark) materials should be got approved by the Engineer incharge before fixing as directed and including conveyance of all materials to site etc., Complete as per standard specification etc complete.

32mm G.I PIPE

32mm G.I Elbow

Sintex Nipple - 20mm GI

Ball Wall - 20mm GI

G.I Bend - 20mm GI Bend

40mm UPVC Pipe

G.M Gate Valve 50mm

50mm GI Pipe

4KSC PVC Pipe - 63mm, Finolex/Equivalent

6KSC PVC Pipe - 63mm, Finolex/Equivalent

4KSC PVC Pipe - 75mm, Finolex/Equivalent

6KSC PVC Pipe - 50mm, Finolex/Equivalent

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil.SS20B

Supply and delivery of wet type 20LPMx 100m Head x 2 HP Bore well submersible pumpset with motor and confirming to IS 8034 with ISI marking with D.O.L pannel board as per standard specification. The pump set should be supplied with 5M flat submersible motor etc.,complete. complying with std. specifications.

Supply and delivery of 2.5 sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete.

Supply and run of 2 x 1.5 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 64)

Supply and run of 2 x 1.5 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains SD 69

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m for fixing of meter board, switch board with MS door and lock and key arrangements including cost and construction of padestal for kiosk box and labour charges etc., Complete.

Construction of Brick Masonry for Gate valve chamber of Size 0.90x0.90x0.90m and fixing of Coverslab 100mm thick including all cost and labour charges etc as per standard specification etc., Cmplete.

Construction of Borewell Pedestal of Size 1.21x0.75x0.90m and fixing of Coverslab 100mm thick including all cost and labour charges etc as per standard specification etc., Cmplete.

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Towards Labour charges for refilling excavated earth for foundation sides and basement including all labour and all other charges etc., complete as per standard specification.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

P K & CO (BID ID -1230893)

SURESH & CO (BID ID -1229287)

V.V.AND CO (BID ID -1229325)