SPECIAL REPAIRS TO SRE BUILDING .P-526, WALL AND ROOF TO ARREST SEEPAGE IN GCA DISPLAY ROOM BLDG NO. P-261, MAIN .P-155 AND S. BY BATTERY CHARGING ROOM .P-18, AT AF STN BAGDOGRA UNDER GE AF BAGDOGRA

Amount

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering cement mortar (1:4) including water proofing liquid @ 200 ml per bag of cement or as specified by manufacturer on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. ( Note : Water proofing liquid shall be measured and paid separately)

Supply only water proofing compound as directed by Engr in Charge.

Taking down chowkats or frame with shutters any description (without taking off shutters from the frame) exc. 1.5 Sqm and n.exc.4 Sqm each

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Sheet glass, 4.80 mm thick, ordinary quality and glazing with rubber beading,cleats in necessary to aluminium door/windows etc area exc 0.5 sq. m in each pane complete all as specifed.

S&F mild steel mortice lock, vertical type, size 100 mm, 4 levers.

S&F aluminium anodised barrel tower bolt extruded section 200 mm long and fixed with MS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint.

S&F 2nd class hard wood 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated.

S&F MS hold fast of flat iron 25 x 3 mm made to shape and fixed with MS screws.

M & L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in hold fast and chowkat fillings, blocks etc complete all as specified.

S&F Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified and as directed.

S&F steel ventilator top hung sutter with box type hinges ,bottom panel fied incl peg stay lugs handle and glazing bar complete incl one shop coat of red oxide primer.

S&F Sheet glass, 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

Taking down chowkats or frame with shutters any description (without taking off shutters from the frame) area n.exc. 1.5 Sqm each

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Linoleum/ vinyl sheet 3.20/3.30mm thick , plain coloured, is sealed down with an approved adhesive in floors including stretching, cutting and fitting complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed

M&L mild steel farmed work as in doors, gates of angle iron, flat iron or other section with gusset plates, rails, braces, hold fast, pin and pintol hinges, sliding bolt etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete all as directed.

S&F mild steel work for wind tie including securing bolt and necessary ; drilling posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS Square tube.

S&F Factory Made Solid PVC Moulded Door Shutters with Particle board core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face complete all as specified.

S&F MS butt hinges, 100 mm medium weight, cold rolled approved make ISI marked.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 200 mm aluminium anodised barrel tower bolts of extruded section and fixed.

M&L for painting to new or undecorated steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of zink primer.

M&L for preparartion and painting of old steel surface of any description not otherwise descsribed over 10 cm width or girth with one coat of synthetic enamel all as specified and as directed.

M&L for preparation and painting to old decorarted wood surface of any description not otherwise descsribed over 10 cm width or girth with one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of external surfaces walls of buildings and Preparation of newly plastered external surface& applying two coat of cement base paint over one coat of primer on wall complete all as specified and directed.

M&L for preparation of surfaces of wall and applying two coats of exterior weather coats over a coat of weather coat exterior primer for camouflage design including necessary scaffolding complete all as specified and directed. (a) Bldg height upto 15m

Complete removal of existing treatment with mechanical mean from wall and washing down with water ' preparation of surfaces of wall and applying two coats of exterior weather coats over a coat of weather coat exterior primer for camouflage design including necessary scaffolding complete all as specified and directed. (a) Bldg height upto 15m

M&L for preparation of surfaces and applying 1.5mm thick cement base putty of Make : "Birla Wall Care Putty or JK wall Putty" or equivalenty make to newly plastered surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick "Birla Wall Care Putty or JK wall Putty or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated cement concrete surfaces on ceiling of roof of buildings and applying two coat of white wash on roof ceiling etc complete all as specified.

M&L for preparation old decorated surface & applying two coat of white wash on wall complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc to recieve tiles or any type of stone etc complete all as specified.

M&L for machine cut Kota stone slab 20 to 25mm thick as in flooring over screed bed 15mm thick in CM 1:6 laid & jointed with cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L machine cut Kota stone slab 20 to 25mm thick as in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed with ditto cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exe. 15cm thickness (below or above ground level).

M&L for 25 mm thick PCC, 1:2:4, type B1 (20mm graded stone aggregate) as in sub base of floors etc complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 10mm thick rendering in Cement mortar (1:4) in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 10mm thick rendering in Cement mortar (1:4) in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4)type B1 (using 20 mm graded stone aggregate) as in flooring etc laid in pannels complete all as specified.

M&L for 100mm thick PCC (1:2:4)type B1 (using 20 mm graded stone aggregate) as in flooring , path etc laid in pannels complete all as specified.

Supply only 38x3mm glass dividing strip coplete all as specified and directed.

Dismantling floor, hearth or wall tilling, stone slab etc including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection, laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.

S&F in repairs, vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to 100mm bore 'P' or 'S' trap, and flushing pipe, anti-syphonage pipe, etc and including cement concrete bedding complete all as specified and directed.

S&F in repairs, PVC flushing cistern low level 10 Ltr capacity including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repairs, vitreous china WHB, white, with flat back of size 550x400mm with bracket including CP waste coupling and 32mm PVC waste pipe complete all as specified and directed.

S&F in repairs, Sinks kitchen or laboratory White glazed fine clay sink of size 750x450x250mm with bracket including PTMT waste coupling and 32mm PVC waste pipe with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified and directed.

S&F in repairs, Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe and PTMT spreader and fixing to 15mm dia pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repairs, vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&F in repairs, PVC jet fixed to water closet pedestal pattern complete all as specified and directed.

S&F in repairs, brass CP angle cock 15mm dia single way and fixed complete all as specified and directed.

S&F in repairs, brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.

S&F in repairs, pillar tap brass CP 15mm bore fancy type for iron pipe complete all as specified and directed.

S&F in repairs, concealed stop valve brass CP 15mm bore fancy type screwed both end for iron pipe complete all as specified and directed.

S&F in repairs, swivel shower of PTMT with arm 15mm size 195mm long bend of 45 degree fixed in 15mm bore of pipe complete all as specified and directed.

S&F in repairs, 100mm dia PTMT gratingcomplete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 600mm long and fixed complete all as specified and directed.

S&F in repairs, for CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed.

S&F in repairs, for sheet glass assembly fancy type 450mm long and 125mm wide with CP double railing and fixed with brass screw complete all as specified and directed. Make:- Cosec

S&F in repairs, CP towel Rail 600mm long "D" type 20mm dia complete all as specified and directed.

S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repairs, PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including removing from site complete all as specified and directed.

S&F in repairs, 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed.

Removing existing water proofing/roof top treatment (including concrete padding)roughening of concrete srfaces, cleaning and washng down the surfaces with water and removing debris/rubbish materials out side MD land complete all as secified and as directed.

M&L for 25 mm average thick pading with plain cement concrete (1:2:4) type B0 (using 20mm graded stone aggregate) finished even & smooth without using extra cement.

M&L for water proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS -3384 @0.30 litre/Sqm, by lying actetic polypropylene (APP) modified membrane pre fabricated, reinforced with non woven polyester, of 3.0 Kg/Sqm(minimum) 3mm thick with minium 75 mm side overlaps and minimum 100mm and applying one coat of bituminious aluminium paint over APP memberane all as specified and directed by Engineer-in-Charge.

S&F in repairs, 75mm dia CI pipe soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repairs, 100mm dia CI pipe soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repairs, CI floor trap 100mm dia outlet with grating including jointing to waste pipe with cement joints, fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp,insulation etc) or insulation boards/slabs etc any thickness including cover fillets completeall as specified and directed by Engr-in-Charge.

S&F for aluminiumm anodised snap grid size 605x605mm frame work for false ceiling consisting of main Tee (36.5x25x1.4) mm Wt @ 0.24 Kg /RM Secondary (cross) Tee (23.5x26.4x1.4) mm Wt 0.1291 Kg/RM and wall aluminium angle (36.5x23.5x1.4) mm Wt 0.22 Kg/RM suspended with 4mm dia GI wire hanger fixed with steel dash through fastners or from purline or roof with butterfly clips etc complete all as specified and directed.

S & F Gypsum Board 12mm thick with aluminium sheet banding in ceiling fixed with screw as per manufacturers instructions including two coats of distemper complete all as specified and directed.

Taking down wall panneling of any size and any description including fillets etc and other similar work complete all as specified and directed

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site with and including PVC sheet fillet of 35mm width and 25mm thick fixed vertically and horizontally at fixing as per manufacturing instruction complete all as specified and as directed.

Dismantling of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article all as specified and as directed.

M&L for flyash brick work (old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6.) etc complete all as specified and as directed.

M&L for flyash (old size brick) work built in cement mortar 1:4 in half brick thick wall etc complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M&L for RCC ( 1:2:4) nominal mix using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finishing concrete surfaces complete all as specified.

M&L for Mild steel bars (TMT bars) 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

M&L for 5mm thick rendering cement mortar (1:3) on ceiling , chajja or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified and directed.

Dismantling of old decayed timber framed work scantling 40 sq cm and over in section in any position.

M&L for for 2nd class hard wood in scantling wrought on sides timber frammed and fixed complete all as specified and directed .

M&L for preparing surface of wood and wood based materials new or old of any description/girth and treated with creosote complete all as specified and directed

Dismantling AC corrugated or semi corrugated sheets including ridges as in roof and segregating serviceable sheet for reuse and removing unserviceble from site complete all as specified and directed.

S&F prepainted galvallume aluminium zinc coating GI based semicorugated steel shees 0.50mm thick and approved coloured having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping stainless steel screws all as per manufacturer instruction complete and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, fixed with self tapping stainless steel screws all as per manufacturer instruction complete and as directed.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 6 Sqmm drawn through in and including 32 mm rigid PVC heavy duty concealed conduits including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable and on run of PVC conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fixing sheet metal enclosures with plug socket single pole and netral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

M & L for taking down existing window type AC by disconnecting all electric connection

S & F Air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated complete all as specified and directed.

M & L for dismantling of all Optical conventional smoke detector, fire indicators, Mannual call point, Hooter, 4 Zone panel etc and all other connected items and reflexing the same after completion of B/ R works with required connected items complete on exact locations of dismantled or as user requirement complete all as specified and as directed.

Supply only Optical conventional smoke detector, LPCB. (MAKE : AGNI/ SYSTEM SENSOR/ GST).

Supply only two wire Plug in detector base (MAKE : AGNI/ SYSTEM SENSOR /GST).

Supply and fixing in repairs conventional MCP, RED with LED 470 ohms, W/O block Box, india +surface mouting box, red (MAKE : AGNI/ SYSTEM SENSOR /GST).

Supply only conventional HORN CUM TROBE , Wall, RED, Standard, Condela, India (Make : honywell, Agni)

Supply Only 4 zone Conventional Fire Alarm Panel (Make: Agni/GST/Honeywell)

Supply & Fixing in repairs of 12 V, 7 AH battery for back up to all FACP and RTU panel (Make: EXIDE/AMAR RAJA or equivalent as approved by GE).

Supply and fixing in repairs Four zone Interface card (Make: Agni)

Supply and fixing in repairs Display card. Make : Agni

Supply and fixing in repairs Main Board (CPU). Make : Agni

Supply and Fixing in repairs Transistor with heat sink. Make : Agni

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 2 x1.5 Sqmm +1 x 1.0 Sqmm earth wire drawn through in and including 20 mm dia rigid PVC heavy duty concealed conduits, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable and one run of PVC will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point / one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per Sl No. 129.00 above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per Sl No. 129.00 above but on independent board.

All as per ser item No. 129.00 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.

Supply and fixing in of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin ) 5/15 Amps, 230V, AC.

Supply and fix in ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

M & L for connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep all as specified and directed.

Supply and fix in repair LED tube light fitting 20 watt, 4 feet, PVC extruded batten complete with refrofit T5 Polycarbonate tube with connector block, etc. complete with all acceessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size.

Supply and fix in repair LED tube light fitting 9 watt, 2 feet, PVC extruded batten complete with refrofit T5 Polycarbonate tube with connector block, etc. complete with all acceessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size.

Supply and fix in repair LED tube light fitting 28 watt, 4 feet, LED Pendant Luminaries complete with refrofit T5 Polycarbonate tube with connector block, suitable arrangement for hanging on ceiling etc. complete with all acceessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. Make : Bajaj Cat No.BPTX28W LED4FWH or equivalent make of HPL/ Crompton/ Havells.

Supply and fix in replacement recess mounting low grade LED panellight 36 watt for armstrong/ grid ceiling or similar ceiling mounting system with concealed complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed.

Supply and fix in repair LED street light fitting 40 watt complete with powder coated die cast aluminium compact, IP 66 protection complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size with 40mm dia GI pipe light grade bracket of length 1.50 meters (Approx) but to shape and fitted with suitable size clamp 2 Nos. complete all as specifed and directed. Make : HPL Cat No. HPLLEDSI4060S or equivalent Model in Bajaj/ Crompton/ Havells.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 10 Sqmm drawn through in and including 32 mm dia rigid PVC heavy duty concealed conduits including 6Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables, one run of earth conductor cable and one run of PVC conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Material and labour for revmoving of existing DBs of any size and make with MCBs and connection. Fixing the same after completion of B/R works making proper arrangement of lugs and other necessary connected items complete as per directed.

Supply and fix of sheet metal enlosure (factory made), TPN vertical Distribution Boards (MCCB Incomver) IP43 protection double door : Plain 8 way MCCB + 24 modules with 250 Amps rated busbar all as specified & directed.

Supply and fix distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fix distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fix distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.

Supply and fix in replacement onload change over switch in sheet enclosure 415 V, 200 amps four pole including suitable lugs, nuts, bolts and washers with suitable size of copper wire for connecting to TPN DB including taking down old all as specifed and as directed.

M & L for taking out old sunserviceable MCCB TPN, four pole from existing DB and supply and fix MCCB TPN 200 amps capacity, run capacity 25 KA at 415 volt 50 Hz AC supply all as directed

Supply and Fixing of MCB DP/SPN 63 Amps, 'C' Curve, 230 Volts, 50 Hz with 10 KA all as specified and as directed.

Supply and Fixing of MCB DP/SPN 6-32 Amps, 'C' Curve, 230 Volts, 50 Hz with 10 KA all as specified and as directed.

Supply and Fixing of MCB SP 6-32 Amps, 'C' Curve, 230 Volts, 50 Hz with 10 KA all as specified and as directed.

Supply and Fixing of MCB SP 63 Amps, 'C' Curve, 230 Volts, 50 Hz with 10 KA all as specified and as directed.

Supply and Fixing of MCB SP 40 Amps, 'C' Curve, 230 Volts, 50 Hz with 10 KA all as specified and as directed.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No. 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

M & L for taking down ceiling fan/ exhaust fan of any make and size

Material and labour for hanging ceiling fan in position and re-commissioning the same including making electric connection, painting as per existing colour paint, writing MES No. with black paint complete all as specified and directed.

Material & Labour for fixing Exhaust fan in position and re-commissioning the same including making electric connection, painting as per existing colour paint, writing MES No. with black paint complete all as specified and directed.

Supply and fixing in repairs, of Switch Disconnector 125 Amps, 4 pole, 415 V and 50 Hz (LT Load Break Switch) in sheet steel enclosure single door type factory made fixed flush with wall or outside on wall surface with front openable cover including taking down old one all as specified and as directed.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

M/S SUNNY ENTERPRISE

UNISON CONSTRUCTION

M/s Prakash Traders

R.N.Construction Co.

M/S BENGAL ENGINEERING ENTERPRISES

M/S Banerjee construction co

SHRI P P SHARMA