Prdg EI Fans AC unit wiring UPS wiring... for A8 office block RC NGN in TE bldg Saifabad Hyderabad

Amount

SUB HEAD-I: EI & FANS, UPS Wiring Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with Modular switch, Modular Plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group C

SITC of 36 watts recess type LED fitting of size 2' x 2' suitable for operation on 230volts, 50Hz, AC supply including providing chain arrangement for hanging the fitting etc., making good the damages done to the false ceiling, interconnections etc., as required. M/s Wipro Elate CRCO10 / SS model of Philips/CG /SS make.

SITC of 18watts surface mounted type LED fitting of approx size 1' x 1' suitable for operation on 230volts, 50Hz, AC supply providing interconnections etc., as required. M/s Wipro / SS model of Philips/CG /SS make.

SITC of 1' LED type fitting suitable for operation on 230V, 50Hz, AC supply including providing interconnections etc., as required. M/s Wipro / SS model of Philips / CG/SS make

supplying and fixing of MS box on the existing cable tray of size 100mm x 100mm x 60mm deep along with 5A 4way wago connector, suitable for operation on 230volts AC supply, including providing inter-connections, including cutting welding painting the box with red oxide and approved colour paint etc., as required.

Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 15/16 A modular socket outlet and 15/16 A modular indicator switch, connections etc. as required. M/s Anchor Roma or ss make

Supplying and fixing of 4 way (4+12), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/ RCCB/ Isolator) M/s Legrand or ss make (AC-1No, Lights & power - 1No, UPS - 1no)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying and fixing following rating four pole 415V Isolator in the existing MCB DB complete with connections, testing and commissioning etc., as reqd a) 63A

Supplying and fixing of adaptor box made of 16 SWG MS sheet including cutting welding painting with red oxide and approved colour powder coating, suitable to accommodate loop wires near DB, contactor etc., as required

Supplying and fixing of 300mm width MS Angle iron tray for laying armored copper cables for lighting, power, UPS, LAN and smoke detection system made of 35mm x 35mm x 5mm thick MS angle iron and providing centre support between angles with 2Nos of 25mm x 5mm thick MS flat with a gap of 6mm between two flats placed horizontally and welded to the angle to provide mechanical strength. The horizontal supports should be placed at an interval of not more than 500mm. The tray shall be suspended perpendicularly from the ceiling by using 2Nos 10mm dia MS Plain rod of not less than 1500mm long placed at an interval of not more than 1500mm with anchor fastners hook type/ chipping in the ceiling. the other end of the down rod should be connected with nut, bolt, washers (flat and spring type) on top and bottom of the tray i/c cutting, welding, grinding and painting with two coats of red oxide and two coats of synthetic enamel paint and making good etc., as required.

Supplying and Laying of 3½ X 25 sq.mm Aluminum Armored XLPE insulated and PVC sheathed power cable of 1.1 KV grade on existing cable tray / on wall etc., complete as required.

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. a) 3½ X 25 sq. mm (28mm)

Supplying and laying of following size of copper cable, PVC sheathed PVC insulated GI wire braided (flexible armouring) of 1.1kV grade suitable for operation on 230volts single phase AC supply of 50Hz on the surface/wall/existing cable tray, providing clamps, nuts and bolts, washers, cable tags where ever required etc., as required., a) 3 x 1.5 Sqmm (for light control)

b) 3 x 2.5 Sqmm (for power plugs & AC)

Supplying and making end termination with brass compression gland and lugs for following size of PVC insulated and PVC sheathed/ armoured steel copper conductor cable of 1.1 KV grade as required. a) 3 x 1.5 Sqmm

b) 3 x 2.5 Sqmm

Supplying and fixing of 2Way metal enclosure including supplying and fixing of 2 pole 16 amps MCB with necessary interconnections, testing etc., as required. (For SAC units)

Supplying and fixing of light duty wall mounted fan of size 16" suitable for operation on 230Volts 50Hz, AC supply including providing interconnections etc., as required. M/s Almonard/CG or ss make

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6A modular switch, connections etc., as required

Supplying and fixing of 12 W emergency LED bulb suitable for operation on 230V 50Hz AC Supply with 3 hours backup including testing etc., as required. (Make: Philips / SS)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as reqd a) 5/6 A Switch

b) 3 pin 5/6A socket outlet

c) Neon Indicatir

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess/surface etc. as required. a) 8 Module (125mm x 125mm)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire.

b) 4x1.5 sq.mm + 2x1.5 sq.mm earth wire.

c) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

d) 4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Truff as required. a) 3 x 2.5 sq. mm

b) 6 x 2.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Providing and fixing of Aluminium box section below the flooring (before tiles fixed by Civil Wing) including cutting the floor during fixing for leveling (if reqd), making good etc., reqd. (in conference hall)

Providing and fixing of 1.6mm thick MS Box sections of suitable size in flooring as junction box including cutting, welding, providing two coats of red oxide, painting, minor civil works etc., reqd.

Providing and fixing of 2mm thick MS sheet painted with of matching tile colour on exising MS Box sections in flooring including cutting, providing screws, wahers etc., reqd.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and fixing of 12" heavy duty exhaust fan in the existing opening suitable for operation on 240V, 50Hz, AC supply including making good the damage, connection, testing, commissioning etc. as required. M/s Crompton or ss make

Supply and fixing of 4' 18/20W LED light fitting suitable for operation on 230V, 50Hz, AC supply including interconnections, testing etc. as required.M/s Crompton or ss make

Supply and fixing suitable size GI box with modular plate and cover in front on surface or recess including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16A modular switch, connections etc., as required.

Dismantling the existing old electrical cable, wiring, fitting, celing fans, conduit etc., and placing the materil at the location specifed by the bulding incharge within the building premis etc., as reqd.

SUB HEAD-II : NET WORK AND TELEPHONE CABLING Supplying and fixing of MS/PVC krone Module box suitable for mounting 2 No 10pair existing krone blocks (20 pair box) with locking arrangement including suitable openings for taking incoming and outgoing cables etc., as required.

Supplying fixing of krone block suitable for connecting the telephone wires of 10 lines (punch down type)

Supplying and drawing following 2 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit/Al box section/work station cabinet etc., as required. M/s D-Link or SS make

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 1 run of cable

(b) 2 run of cable

(c) 3 run of cable

Proviving and fixing of LAN CAT6 RJ45 connector to the existing LAN cable i/c interconnections, testing etc., as reqd.

Supplying and fixing of the following LAN network accessories i/c interconnections & testing etc., as required. (a) RJ11 female socket (Telephone Socket) i/c surface PVC box M/s D-Link or SS make

(b) RJ45 female socket (LAN socket) i/c surface gang box, singl face plate M/s D-Link or SS make

(c) 2 Mtr Length Patch card (Ready Made) M/s D-Link or SS make

Supplying and fixing of 24 port LAN rack mount switch suitable for operation on 240V, 50Hz AC supply including interconnections, testing etc., as reqd M/s D-Link (DGS-1024C) or ss make

Supplying and fixing of 9U Metal Mounting Rack suitable for holding 2no 24 Port LAN switches with transparent door, locking arrangement, 4no power socket, cooling fan, wall mountable type etc. as reqd.

SRI SRINIVASA ELECTRICALS