COMPREHENSIVE MAINTENANCE OF VEHICLES AND OTHER MAINTENANCE WORKS UNDER GE BRICHGUNJ

Amount

Repair/maint of vehicles- Tata Xenon/Yodha , once in every four Months by power washing the vehicle from outside with the help of soap/shampoo /car washing detergent completely by removing dust and dirt from under side of the vehicle, checking of lubricants oil ,water, brake oil and other acessories fluid and top up it if required. Cleaning the vehicle from inside with the help of vaccum pump removing dirt and dust from complete unit, cleaning of dash board with the help of suitable mild cleaning agent of car . Cleaning of radiator of vehicle, checking its efficiency and proper functionng, checking of brake of the vehicle and do minor repair if required.Do suitable oiling and greasing. Checking allingnment of the wheels functioning of wiper, indicators ,back light ,head lights, and all electrical work like wiring and testing of all lights and bulbs complete all as specified and directed .

All as per item no 1 above but for Eicher 10.70/10.75 including Eicher complete all as specified and as directed

All as per item no 1 above for but Maruti Gypsy complete all as specified and as directed

All as per item no 1 above for but Maruti Omini ,Maruti Eeco ,Maruti Siaz, Mahindra Scarpio, Maruti Swift Dzire ,Maruti Ertiga complete all as specified and as directed

Repair/maint of vehicles- Motor Cycle Hero , once in a every four Months by power washing the vehicle from outside with the help of soap/shampoo/washing detergent completely by removing dust and dirt from the vehicle, checking of lubricants oil , brake oil and other acessories fluid and top up it if required. checking of brake of the vehicle and do minor repair if required.Do suitable oiling and greasing. Checking of ,clutch and accelerator,Chain & socket , indicators ,back and front light ,and testing of all lights and bulbs,repair of puncture if any ,complete all as specified and directed

Tata Xenon/Yodha Servicing of Vehicles- Tata Xenon/yodha each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP(Fuel Injector Pump), shaft,shocker and suspension system ,braking system, replacement of all type of filters ,Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. Spares parts carried out from authorised dealer only. 2. Brake oil, gear oil and coolant shall be measured and paid separatley . 3. Servicing of vehicle shall be carried out at authorised workshop 4.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Air filter ,Oil filter and Fuel filter each set of three for Tata 207 Make - Mico ,bosch,Purolator

Air filter ,Oil filter and Fuel filter ,three pole/ two pole complete set for Tata Xenon/Yodha Make - Tata Cat part No 25349110117, 278918130104, 279709119901, 253409130356

Brake oil Make: TVS ,KBX

Power Steering oil Make Waxpol,Castrol

Gear oil Make- Castrol

Coolant Make- deflec ,Castrol

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Fog lamp Make-MGP

Brake/ Back light Assy Make - Autopal, K K

Indicator Assy Make - Autopal, K K

Wipper Assy with blade complete make -Syndicate,Champion etc

Water pump assembly Make- Tata

Speedometer

Door Lock assembly Make -Syndicate,ATS

Door Hinges set of two (upper & Lower)

Coolant bottle with pipe

Wheel Arch Guard cover front and rear as per existing model of Tata 207 DI/Yodha Xenon including clip and bolts

Mud pad of best quality of Tata

Side looking mirror of side doors of best quality

Fan v belt Make -Fenner

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed

S & F of Side Foot hold/Foot rest of best quality for both sides set of two for Tata Xenon/Yodha complete all as specified and as directed

Labour for Repair of suspension system of front and rear wheel by Dismantling upper and lower arm ,tie rod end set,centre pin,wheel joint upper arm,wheel joint lower arm,jumping bush,centre pin bush, bush dismantling & fixing from lathe machine work shocker rear set & front set leaf springs, reassembling and testing after greasing Tempering and matching complete including replacement of following items & testing complete all as specified and directed

Suspension Bush Kit

Jumping Boot Make- KBX

Centre Pin

Centre Pin Bush Brass

Wheel Joint Make Telebrass

End set Make- MGP,Telebrass

Front Shocker Set Make-Gabrial,monro

Rear Shocker Set Make-Gabrial,monro

Load Spring Bush Make-KBX

Load Spring Bush Set Make-KBX

Load Spring Pin Set Make-KBX

Load spring/Leaf spring (kamani Patta) as per existing size

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by dismantling front and rear wheels, greasing, brake work including replacing the following items:-

Brake Pad Make-TVS,KBX

Brake shoe Make-TVS,KBX

Wheel Cylinder set Make-TVS,KBX

Brake cylinder

Brake Master Cylinder Make- Bosch,TVS

Disc Rotor Plate as per size

Front wheel bearing Thrust 20305 set of two Make-NBC

Rear Ball Bearing Make-NBC

Labour for Repair to gear box including bush repair/repalce and greasing etc. Complete.all as specified including replacement of following

Gear Box bearing

First Gear Make-Tata

Second Gear Make- Tata

Synchroniser Ring Brass

Gear Box kit Make-Bosch,TVS

Gear Lever Kit Make-NIC

Labour for Repair to Clutch by overhauing and taking down gear box complete from engine opening clutch plate , pressure plate , clutch bearing including replacement of following spares

Clutch set Make-Ceekay ,Tata

Clutch bearing Make-Ceekay,tata

Lower Clutch Cylinder Make-TVS,Bosch

Upper Clutch Cylinder Make- TVS,Bosch

Labour for Repair/replacement of Propeller shaft including replacement of following spares

Propelller Shaft Universal Joint (U J ) Cross set of three

Centre bearing Make- NIC,TVS

Repair of fuel pump by overhauling and testing on testing bench including lathe works etc reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No

Nozzle set of four of Fuel Pump

Opening steering Box assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Steering box bearing,stearing gear,stearing ball screw

Power Stearing Compressor

Steering Handle assembly Electric for Tata

Steering Horn pin set

Labur for Opening Engine Head assembly, complete overhauling of top , lathe work, facing, ramming including replacing of Head gasket and testing complete and refixing & reinstalling the same complete all as specified and as directed.

Head Gasket set Make-Venara ,senior

Valve inlet/outlet set Make-EVL

Valve seal set Make-Senior,Tata

Valve guide set Make-Senior,Tata

Valve Seat Make-Senior,Tata

Tappet Cover Packing Make-Senior,Tata

Griding, polishing of cylinder head, cylinder valve seats, valve guide etc all as required for best overhauling for Engine Head of Tata complete all as specified and directed

Taking down of radiator complete assembly and repair of radiator including welding/brazing works, cleaning complete and replacement of gaskets and seal other items as required all as specified

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding rubbing making smooth to surface,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed

M&L Only painting including painting of all army sign and marking and vehicle BA No. on Number plate.

M&L Denting work on the body of veh complete all as directed by the Engr-in-Charge

M&L Patching work of broken/rusted parts in door , floor by electring and gas welding complete all as directed by the Engr-in-Charge

S & F of loose seat cover complete set including repair of Damaged seats and stitching work complete all as specified and directed

Supply and fixing of foot mat for Vehicle-Tata 207/Yodha complete all as specified and directed

Supply and fixing Floor matting best quality

M&L Replace of Front glass/roof top rubber beading complete Make -Syndicate,ATS,TATA

M&L Repair to Door /Window glass with rubber beading including welding of hinges complete Make -Syndicate,ATS,TATA

Supply and fixing of PVC multistranded copper single core cable 25 sqmm required for Battery

Supply and fixing of Horn assembly complete including wiring connection and fixing

M&L Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

M&L Repair of puncture of tube inner

M&L Dry Cleaning of Seat cover complete

Eicher 10.70/10.75 Servicing of Vehicles- Eicher 10.70/10.75 & Eicher with Hydraulic telescopic VMTL Ladder each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP(Fuel Injector Pump), shaft,shocker and suspension system ,braking system replacement of all type of filters ,Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2 Brake oil, gear oil, steering oil and coolant shall be measured and paid separatley . 3 Servicing of vehicle shall be carried out at authorised workshop. 4.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Air filter ,Oil filter and Fuel filter each set of three Make - Mico ,bosch

Brake oil Make: TVS ,KBX

Power Steering oil Make- Waxpol,Castrol

Gear oil Make- Castrol

Coolant Make- deflec ,Castrol

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Break/ Back light Assy Make - Autopal, K K

Indicator Assy Make - Autopal, K K

Fog lamp Make- Minda, Autopal

Wipper Assy with blade complete make -Syndicate,Champion etc

Speedometer cable

Replace of Front glass/roof top rubber beading complete

Repair to Door /Window glass with replacement of rubber beading , welding of hinges complete

Door Lock assembly Make -Syndicate,ATS

Water pump assembly

Side looking mirror of side doors of best quality

Mud Flaps of best quality

Coolant bottle with pipe

Fan v belt Make -Fenner

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of alternator including repair/replace of rectifier assembly and repair/replace of rotor assembly complete all as specified and as directed

Labour for Repair of suspension system of front and rear wheel by shocker Leaf spring/load spring rear set & front set leaf springs, reassembling and testing after greasing Tempering and matching complete including replacement of following items & testing complete all as specified and directed

U Bolt

Front Shocker Set Eicher

Rear Shocker Set

Rod Spring Bush

Rod Spring Brush Set

Rod Spring Pin Set

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by dismantling front and rear wheels, greasing, brake work including replacing the following items:-

Brake Pad Make-Eicher

Brake shoe Make-Eicher

Wheel Cylinder set Make-Eicher

Brake cylinder Make-Eicher

Brake Master Cylinder Make-Eicher

Wheel cylinder kit (Front)

Wheel cylinder kit (Rear)

Front wheel bearing Thrust MD025294,MB025345 set of two

Rear Wheel Bearing Thrust MP321624,MB161132 set of two

Labour for Repair to gear box including bush repair/repalce and greasing etc. Complete.all as specified including replacement of following

Gear Box bearing

First Gear

Second Gear

Synchroniser Ring

Gear Box kit

Gear Lever Kit

Labour for Repair to Clutch by overhauing and taking down gear box complete from engine opening clutch plate , pressure plate , clutch bearing including replacement of following spares

Clutch set ID 301820

Clutch bearing ID305742

Lower Clutch Cylinder

Upper Clutch Cylinder

Labour for Repair/replacement of Propeller shaft including replacement of following spares

Propelller Shaft Universal Joint (U J ) Cross set of three ID345540

Centre bearing MB563234

Repair of fuel pump by overhauling and testing on testing bench including lathe works etc reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No

Nozzle set of four of Fuel Pump

Opening steering Box for repair and replacement of unserviceable parts for Eicher complete all as specified as directed.

Tie rod end set

Spindle pin,Ball screw

King pin Set

Column assembly stearing

Stearing gear

Bearing set of two

Oil Seal

Taking down of radiator complete assembly and repair of radiator including welding/brazing works, cleaning complete and replacement of gaskets and seal other items as required all as specified

Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet by using gas welding,applying two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface complete all as specified and directed

Only painting of body including Scraping of old painted surface and carried out and painting of all army sign and marking and vehicle BA No. on Number plate.

Denting and welding of broken parts complete all as directed by the Engr-in-Charge

S & F in replacement of rusted/ damaged seat cover complete set including repair of Damaged seats and stitching work complete all as specified and directed

Floor matting best quality

Supply and fixing of foot mat

Supply and fixing of PVC multistranded copper single core cable 25 sqmm required for Battery

Replacement of tube inner complete all as specified and directed

Repair to tank leakage if any for the fuel tank including cleaning of tank and replacement of u/S float valve assembly and fuel tank lock and key.

M & L for repair of suspension and hydraulic system of Telescopic VMTL Ladder Eicher by testing and inspection of all gear levers and release valves complete and topping up of hydraulic oil and replacement of oil pipe and air pressure pipe , hose pipe and repair and testing of trolley complete all as specified and directed

Maruti Gypsy Servicing of Vehicles- Maruti Gypsy each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP (Fuel Injector Pump), shaft,shocker and suspension system ,braking system inlcuding brake shoe ,Radiator cleaning, replacement of all type of filters and greasing of all wheels, Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2. Brake oil, gear oil and coolant shall be measured and paid separatley . 3 Servicing of vehicle shall be carried out at authorised workshop only. 4..Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Fuel Filter, Oil Filter and Air Filter set of three complete

Brake Oil

Gear Oil

Coolant

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Head light Relay

Brake/ Back light Assy Make - Autopal, K K

Indicator Assy Make - Autopal, K K

Fog lamp

Wipper Assy with blade complete make -Syndicate,Champion etc

Replace of Front glass/roof top rubber beading complete

Repair to Door /Window glass with replacement of rubber beading complete

Door Lock assembly Make -Syndicate,ATS

Water pump assembly

Side looking mirror of side doors of best quality

Fan v belt Make -Fenner

Parking Light Bulb

Perfume

Coolant bottle with pipe

Silencer packing

Cable and Lugs

Air Pipe

Radiator cleaning fluid bottle

PVC side bumpers

Clutch and pressure plate set including clutch bearing and clutch cylinder,Clutch Paddle complete Make -C K or eqlt

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for repair of suspension system by Dismantling front wheel and wheel joint upper and Lower of suspension system, leaf springs ,reassembling and testing after repair including replacement of following items:- (a) Suspension Kit -01 Kit, (b) Lower arm bush -08 Nos. (c) Upper arm bush -04 Nos. (d) Wheel joint upper -02 Nos. (e) Wheel joint lower -02 Nos. (f) Coil spring pad -02 Nos. (g) Tie rod end -04 Nos. (h) Upper arm bolt -02 Nos. . testing complete all as specified and directed

Repair of Wheels and braking system including servicing and testing of master and wheel cylinder by Dismantling front and rear wheels, greasing, brake work including replacing the following items:- (a) Brake pad front wheel -04 Nos. (b) Rear wheel brake shoes -08 Nos. (c) Wheel bearing inner -02 Nos. (d) Wheel bearing outer -02 Nos. (e) Wheel cylinder kit -01 No. (f) Brake plate assly -01 No. (g) Brake pad assembly -04 Nos.(h) Brake lining-01 No

Master cylinder complete

Repair of fuel pump and testing on testing bench reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No and other items as required

Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Repair to gear box including bush repair/repalce and greesing etc. Complete.

Roof cover best quality including stitching work and fixing complete

Floor matting best quality

Supply and fixing of foot mat

Replacement of rusted/ damaged seat/seat cover complete all as specified and directed

Denting of certain places of bumper/body, removing dents, including patching work by gas/electric welding

Painting two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface including all army signs complete all as specified and directed

Staff Cars -Maruti Servicing of Vehicles-Maruti Omini ,Maruti Eeco ,Maruti Siaz, Mahindra Scarpio, Maruti Swift Dzire ,Maruti Ertiga each two times at interval of five months comprising checking and repair/replacement of unserviceable spares of engine ,self starter , gear box FIP(Fuel Injector Pump), shaft,shocker and suspension system ,braking system, replacement of all type of filters ,Wheel alignment and wheel balancing by computerized Machine including tyre rotation etc of Vehicles including dismantling / Replacing of defective parts with new parts at workshop complete all as specified and directed Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2. Engine oil (15W40)suitable for veh consuming 87MT gas as fuel , Brake oil, gear oil ,steering oil and coolant shall be measured aII Veh and paid separatley . 3 Servicing of vehicle shall be carried out at authorised workshop only. 4.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Oil filter, Fuel Filter and Air filter set of three complete

Brake Oil

Engine Oil for all Veh as per requirement 15W40 /10W40/10W30/20W50

Steering Oil

Gear Oil

Coolant

Glow Plug

Fan belt

Air Pipe

Hose pipe of radiator

Head light bulb Helogen 12 volt 60 watt Make - Autopal,Helonix

Head light Relay

Break/ Back light Assy Make - Autopal, K K

Indicator Assy Make - Autopal, K K

Cabin light assembly

Fog lamp assembly

Wipper Assy with blade complete make -Syndicate,Champion etc

Spedometer Cable

Head light assembly complete with Bulb and connection complete . Make - Autopal, Helonix,Lumax

Replace of Front glass/roof top rubber beading complete

Repair to Door /Window glass with replacement of rubber beading and welding of Hinges complete

Rain visor/rain guard set of four for doors

Door Lock assembly Make -Syndicate,ATS

Water pump assembly

Side looking mirror of side doors of best quality

Steering/Gear handle Cover

Parking Light Bulb

Radiator cleaning fluid bottle

Coolant bottle with pipe

Silencer packing

Cable and Lugs

Mud Flaps of best quality

Star Plate with brass letter

Star Plate with PVC letter

BA No Plate with letters and Nos

Star Box leather Cover

Star plate Box made up of steel including clamps nut bolts

Wheel Cover set

Dashboard Lock/Fuel Tank Lock

Dashboard Polish

Car Polish

Hand Towels

Full size Towels for staff cars

Labour for Repair of suspension system of front and rear wheel by Dismantling upper and lower arm ,tie rod end set,centre pin,wheel joint upper arm,wheel joint lower arm,jumping bush,centre pin bush, bush dismantling & fixing from lathe machine work shocker rear set & front set leaf springs, reassembling and testing after greasing Tempering and matching complete including replacement of following items & testing complete all as specified and directed

Suspension Bush Kit

Jumping Boot

Centre Pin

Centre Pin Bush

Wheel Joint

End set

Front Shocker Set

Rear Shocker Set

Rod Spring Bush

Rod Spring Bush Set

Rod Spring Pin Set

Repair of Wheels and braking system including servicing and testing of master and slave cylinder by dismantling front and rear wheels, greasing, brake work including replacing the following items:-

Brake Pad

Brake shoe

Wheel Cylinder set

Brake cylinder

Brake Master Cylinder

Disc Rotor Plate

Front wheel bearing Thrust

Rear Ball Bearing

Labour for Repair to gear box including bush repair/repalce and greasing etc. Complete.all as specified including replacement of following

Gear Box bearing

First Gear

Second Gear

Synchroniser Ring

Gear Box kit

Gear Lever Kit

Labour for Repair to Clutch by overhauing and taking down gear box complete from engine opening clutch plate , pressure plate , clutch bearing including replacement of following spares

Clutch set

Clutch bearing

Clutch Cylinder

Repair of fuel pump by overhauling and testing on testing bench including lathe works etc reassembling after repair and replacing with following items:- (a) Valve lifter -01 No (b) Spring -01 No

Nozzle set of four of Fuel Pump

Opening steering assembly, removing stearing rack, lathe work, facing, ramming including replacing the following items:- (a) Centre pin bush -02 Nos. (b) Centre bearing assly -01 No. (c) Link rod repair kit, (d) Check nut -02 No. (e) Lower stearing oil -01 Ltr.

Power Stearing Compressor

Replacement of Steering Rack assembly complete Of Maruti veh by new complete all as specified and directed

M & L for rewinding of self starter of Vehicles with super enamelled insulating copper wire of existing gauge , insulating materials including assembling and testing complete all as specified and directed by Opening and dismantling of self starter, and replacing with following items. (a) Carbon brushes -01 Set (b) Solenoid Switch -01 No (c) bendix -01 No (d) Fly wheel -01 No (as per sample).

M & L for Servicing of air conditioning including repalcement of Cabin Air filter and charging of refrigerant including electrical works complete all as specified and as directed

Floor matting best quality

Supply and fixing of foot mat

Seat cover set complete all as specified and directed

Denting of certain places of bumper/body, removing dents, including patching work by gas/electric welding

Painting two coat of synthetic enamelled paint over one coat of base primer and matching with existing surface including all army signs complete all as specified and directed

Servicing of Vehicles- Motor cycle HERO two times at interval of six months comprising checking and repair/replacement of unserviceable spares of engine, gear box, FIP(Fuel Injector Pump), suspension system ,braking system , Chain and chain cover, Kick Assembly, replacement of filters and greasing of all wheels, of Vehicles including dismantling / Replacing of defective parts with new parts at work shop complete all as specified and directed by Engr in charge Note :-1. Spare parts shall be measured and paid separatly under relevant items here in after but fixing of the same deemed to be included in unit rate. 2 Brake oil, gear oil shall be measured and paid separatley . 3 Servicing of vehicle shall be carried out at authorised workshop. 4.Other minor consumable items like nut bolts washer , cotton waste etc are deemed to be included in the quoted rate

Air Filter

engine Oil for Motorcycle

Brake shoe

Clutch plate

Brake cable

Accelerater Cable

Clutch wire cable

Head light assly

Kick Housing with bearing

Shock observer rear and front

Chain and socket

Point

Condenser

Spark Plug

Indicating assly

Speedometer assembly

Horn complete assembly

Speedometer Cable

Back light assembly

Dicky Box complete with clamp nut bolts Make- Steelbird,Studds

Lock and key of fuel tank & luggage/dak box

Labour charge for seat repair including replacement of seat cover complete all as specified and directed parts

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed. Compound measured and paid seperately

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces as in Ceiling Surface, soffits of slab/chhajas in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid integral water proofing chemicals complete all as specified and directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] (3% by wt of cement).

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper l over a coats of alkali resistant priming paint including complete all as specified and directed by Engineer - in -Charge.

M & L preparation of new plastered or unplastered surfaces of wall and applying Two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying 3 coat of white wash on ceiling all as specified.

M& L for 1mm thick on wall care putty on wall and making is even smooth with emery paper complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed by Engineer - in -Charge.

M&L for complete removal of existing treatment from surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engineer - in -Charge.

M&L for complete removal of old external surfaces of walls, Facias, cornices etc and applying two coat of weather proof anti fungal paint (Apex - ultima) over a coat of primer on walls all as per manufacturer instruction including necessary scaffolding complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on surfaces of RCC Over Head tank for height up to 21.0 M up to plaster surface ) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coat of weather proof anti fungal paint (Apex - ultima) over coat of primer complete all as specified and directed. [Make:- Apex Ultima Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- (a) The rate quoted are inclusive of neccessary scafolding expenses upto 21.00 M height with safety arrangements for labour to work as per labour safety rules for high rise works . (b) The rate quoted are inclusive of removal of honey bee hives from OHT at any height. .(c) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (d) During the guarantee period if exterior acrylic emulsion weather coat paint gets pealed or becomes layered contractor shall rectify defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work.

M&L for preperation of old painted steel surfaces (anti-corrosive) over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preperation of old painted steel surfaces (anti-corrosive) not exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preperation of old painted wood and wood based suraces over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M/S V K TRADERS (BID ID -3473273)

Ashoka Engineers (BID ID -3473280)

RK TRADERS (BID ID -3473370)