GE/ALP (8208B) KOLKATA OF 2023-24

Amount

S&F in repair 5 mm thick beveled edge best quality looking mirror of size 600x450 mm fixed with screws complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 925mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair sinks without drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mmx330mmx160mm complete all as specified and directed.

S & F in repair waste coupling of PTMT 32-40mm dia (half or full threaded) (minimum weight -45 gms) complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as spceified and directed.

S & F in repair 110/125 mm dia floor trap fixed in floor with grating including jointing with solvent 1:2:4 cement concrete,complete all as specified and directed

S&F in repairs 32 mm dia PVC waste pipe for wash hand basin and urinal down pipe complete all as specified and directed

Supply and fixing in repair Vitreous China Squatting pan, Orissa pattern, size 580mm x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor. complete all as specified and directed

S&F in Repairs vitreous China wash down water closet pan ( padestal pattern) inclduing PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete and all as specified and directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified and directed.

S&F in repair 15mm bore CP angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia CP stop cock(cocealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore CP pillar taps, with capstan heads, chromium plated, fancy type screwed down for pipe, high pressure ,complete all as specified and directed.

S&F in repair 15mm bore PVC angular valve,with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia PVC Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15 mm dia PVC Pillar tap, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 25 mm dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule fixed complete and all as specified and directed.

S&F for ball valve high pressure of PTMT 25 mm bore ( minimum weight 210gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed complete all as specified and directed.

S&F in repair 600 mm PVC connection 15 mm size with PTMT nut complete all as specified and directed .

Taking up or down 15mm bore steel water tubing (GI Pipe) and connections complete all as specified and directed (upto 8 storey bldg).

Taking up or down 20mm bore steel water tubing (GI Pipe) and connections complete all as specified and directed (upto 8 storey bldg).

Taking up or down 40 mm bore steel water tubing (GI Pipe) and connections of following bore complete all as specified and as directed (upto 8 storey bldg).

Taking up or down 25 mm to 32 mm bore steel water tubing pipe and connections complete all as specified and directed.

S&F for galvanised 15mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and directed (upto 8 storey bldg).

S&F for galvanised 20mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and directed (upto 8 storey bldg).

S&F for galvanised 40 mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and directed (upto 8 storey bldg).

S&F for galvanised 25mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling of following bore complete all as specified and as directed.

S&F in repair 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as specified and directed.

S&F in repair 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed.

S&F in repair 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long 20mm dia fixed with and including chromium plated brass screws & wooden/plastic cleats complete all as specified and directed.

S & F in repairs aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair CP Health faucet with all necessary fittings complete all as specified and directed.

S&F in repair PVC Health faucet with all necessary fittings complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair stainless steel soap dish fixed in wall with screws complete all as directed.

Dismantling water tank of capacity exc. 500 Lt but n.exc.1000 ltr, open or closed and removing to stores complete all as specified and directed.

Dismantling water tank of capacity exc. 1000 ltr but n.exc.2000 Lt, open or closed and removing to stores complete all as specified and directed.

S&F for 1000 ltr capacity rotational moulded polyethyene water storage tank (cylinderical vertical with closed top)of , hoisted and fixed in position in SSR Part-I complete all as specified and directed.

S & F for 2000Ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and directed. Note : Rewinding work and new spare parts required for replacement shall be measured and paid seperately under relevant items.

Rewinding of ceiling fan, 1200/1400mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable for electric connection complete all as specified and directed.

Supply only ball bearing of size 6201/6202/6203

Supply only metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size complete all as specefied and directed.

Supply only capacitor for ceiling fan 2.25 MFD complete all as specified and directed.

Supply only fan blade (3 Nos blade is one set) 1200/1400 mm sweep suitable for Make: USHA/Havells /Bajaj complete all as specified and directed.

Supply and fix as in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc complete all as specified and directed.

M&L in replacement of fan hooks with double fasteners nut for hanging of ceiling fan complete all as specified and directed.

M&L in replacement of 15mm dia down rod for hanging of ceiling fan 2/3 feet as per site requirement complete all as specified and as directed.

Material and labour for painting of ceiling fan complete, in situ of size 1200/1400mm sweep with down rod upto 2.00 mtr long with two coats of synthetic enamel (white paint) including preparation of old painted surfaces including writing of MES No with letters n exc 15mm complete all as specified and directed.

Taking down exhaust fan/wall mounted fan of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : Rewinding work and new spare parts required for replacement shall be measured and paid seperately under relevant items.

Rewinding of exhaust fan, 250/300/380mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and directed.

All as per item No 55 here-in-before but for 450 mm sweep padestal fan.

All as per item No 55 here-in-before but for wall mounting fan 400 mm sweep complete all as specified and directed by the Engr-in-Charge.

Supply only capacitor for exhaust fan 4.00 MFD complete all as specified and directed.

All as per item No 58 here-in-before but 3.15 MFD

Material and labour for preparation of exhaust fan/wall mounting fan and applying one coat of grey synthetic enamel paint by spraying using spray gun with filling cavities including writing of MES No, taking down and refixing complete all as specified and as directed.

Rewinding of Padestal fan, of size of sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and directed.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and directed.

All as per item No 63 here-in-before but of 1.5 KW

Supply & fix in repair thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater.

Supply and fix in repair indicating lamp, 230 V, flush type, rectangular, red and green indicator suitable for water heaters.

Supply & fix in repair PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser.

Supply only 450mm long brass CP connection with 2 nuts without nipple suitable for geysers. Make : Jaquar Cat No 805B or equivalent approved by GE.

Material and labour preparation to old painted surface of storage water heater and painting of geyser 25 ltr capacity with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and directed.

All as per item No 69 here-in-before but for 35/50 ltrs capacity.

Supply and fix as in repair for split cover made out of 22 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25 ltr capacity.

All as per item No 71 here-in-before but for 35/50 ltrs capacity.

Supply and fixing as in replacement patented nano Glassline coated steel inner tank of 25Ltr capacity geyser suitable for model of make: Cromption/Usha/Bajaj complete all testing and make good in disturbed surface at existing location complete all as specified and as directed.

All as per item No 73 here-in-before but for 35 ltrs capacity.

All as per item No 73 here-in-before but for 50 ltrs capacity.

Supply and fix as in repair for non return valve, 15mm bore, screwed down high pressure, cast copper alloy, chromium plated.

Supply and fix as in repair for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty.

Supply and fix as in repair for apparatus plate , including suitable for water storage heater type 25 ltrs capacity.

All as per item No 78 here-in-before but for 35/50 ltrs capacity.

Supply and fix as in repair for fusible plug , calibrated 95 deg to 100 deg C suitable for water heater.

Supply and fix as in repair for glass wool , between the inner and outer vessel of water heater any type and capacity.

Supply and fix as in repair for PVC insulated flexible copper conductor cable (FRLS) 4 Sqmm 3 core , 1100 Volts grade conforming to IS 694.

Supply and fix as in repair 15mm dia GI nipple, 2" long including GI socket.

Supply and fix rubber gasket as in repair for appratus plate any type/capacity all as specified and directed.

Material and labour for replacement of 80-100 mfd Starting capacitor for water cooler of capacity 80/ 150 ltrs, make : Sarda/ Power

Material and labour for replacement of running capacitor 10 mfd for Water Cooler of capacity 80/ 150 ltrs, make : Sarada/Power

Material and labour for replacement of 15mm bore chromium plated push cock suitable for water cooler of any capacity as per existing shape and make or equivalent as approved by the GE.

Material and labour for replacement of thermostat switch for water cooler, (make : Indfoss or equivalent as approved by the GE.)

Material and labour for replacement 15mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

Disconnecting defective sealed compressor unit of Water Cooler Upto 150 ltrs capacity from the water cooler and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and directed.

Supply and fixing of sealed compressor unit of water Cooler Upto 150 ltrs capacity with copper tube and refrigerant filling etc complete all as specified and directed.

Material and labour for replacement of door gasket for 150 ltrs capacity Water Cooler

Material and labour for replacement of door gasket for 80 ltrs capacity Water Cooler

Material and labour for replacement of starting relay suitable for water cooler 80/ 150 ltrs capacity

Material and labour for replacement of overload protector suitable for Water cooler of capacity 150 ltrs

Material and labour for replacement of overload protector suitable for Water cooler of capacity 80 ltrs

Material and labour for replacement of capillary copper tube of size 0.36 mm for refrigerators of capacity 280 ltrs

Material and labour for replacement of freezer door for refrigerators of capacity 280 ltrs

Material and labour for replacement of thermostat switch (Make : Indfoss/Kelvinator) for refrigerators of capacity 280 ltrs

Material and labour for replacement of Chill tray for refrigerators of capacity 280 ltrs

Disconnecting defective condensor coil of refrigerators 280 ltrs capacity and replacing the same with new condensor coil and fixing in original position as per existing

Material and labour for replacement of Inner lights for refrigerators of capacity 280 ltrs

Disconnecting defective sealed compressor unit of Refrigerators 280 ltrs capacity and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and as directed.

Supply and fixing for sealed compressor unit of water cooler Upto 150 ltrs capacity with copper tube and refrigerant filling etc complete all as specified and directed.

Material and labour for replacement of door switch for refrigerators of capacity 280 ltrs

Material and labour for replacement of 5 Amps, 230 Volts Plug Top Make : Anchor or equivalent as approve by the GE.

Supply and Fixing Digital thermometer LCD (Hygrometer ) For Indoor Humidity And Tempratuer Sensor all as specified and as directed.

Supply and refill suitable gas for refrigrator 280 ltrs complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully sub main wiring of size upto 16 Sqmm including making good disturbed surfaces of walls, ceilings etc all as specified and directed.

Material and labour for surface type point wiring for one light/fan point controlled by one way switch,with 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade ,controlled by one way switch drawn through and including appropriate size of PVC casing caping/conduit with all accessoriese for surface wiring including 1.5 sqmm PVC insulated un shealthed copper cable (FR-LSH) multistrand conductor 1100 Volts grade for continuity earth wire connected to each point and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick PVC laminated/bakalite sheet cover complete all as specified and directed.

All as per item No 111 here-in-before but for 3 Pin socket outlet 5 Amps same board with other switches with cable 1.5 Sq mm size

All as per item No 111 here-in-before but for 3 pin 5 Amps independent board

All as per item No 111 here-in-before but for 3 pin 5 Amps independent in the same vertical plane/below the switch board of light/socket points with cable,1.5 Sq mm size.

All as per item No 111 here-in-before but for 5 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm cable.

All as per item No 111 here-in-before but for power supply unit consisting of starter or 5 pin 15Amps switch socket combination on independent board with 4.0 Sqmm cable.

All as per item No 111 above but for one buzzer point controlled by one bell push

All as per item No 111 above but for one light point controlled by two way swithces with cables 1.5 Sqmm size

M & L for socket outlet 2 in 1,3 pin, 5 Amps, 240 V on same board complete all as specified and directed.

M & L for switch socket combination 3 pin 15 Amps, 240 V flush type,complete all as specified and directed.

M & L for switch socket combination 5 pin 16 Amps, flush type, 240 Volts, universal type all as specified and directed.

S & F for switch piano type 5 Amp single pole one wayall as specified and as directed.

S&F for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and as directed.

S & F for buzzer call bell AC 230 Volt single pole. all as specified and as directed.

M&L for bell push 5 Amp all as specified and as directed.

S & F for ceiling rose surface backelite 65 x 50mm three terminal all as specified and as directed.

S & F for Switch piano type 5 Amp two way. all as specified and as directed.

Supply and fixing for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc including taking down old unserviceable regulator all as specified and directed.

Supply and Fixing in repair of MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA. Make-Legrand Cat No-4085-87 to 4085-95 or equivalent as approved by the GE.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as directed. Make-Legrand Cat No-4086-18 to 4086-20 or equivalent as approved by the GE.

Supply and fixing in repair MCB TPN, 63 Amps, 240 Volts , breaking capacity 10KA complete all as directed. Make-Legrand Cat No-4087-02 or equivalent as approved by the GE.

Supply and fixing in repair MCCB TPN, 100 Amps, 240 Volts , breaking capacity 25KA complete all as directed. Make-Legrand Cat No-4200 57 or equivalent as approved by the GE.

Supply and fixing as in repair MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

Supply and fixing in repair of Vertical TPN DBs with , double door with IP-43 protection suitable for TP/FP MCCB upto 250 Amps as incomer and TPN/SPN MCB as outgoing 415 volts 8 way without MCCB & MCBs, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr in Charge . Make :- Legrand Cat Part No : 5077-52, Model No DPX³ 160+14/Havells/L&T. (Note:- MCCBs/ MCBs will be measured and paid for separetely under relevant items.)

Material and labour for sub main wiring for main DBs to Sub DBs with standard copper conductor 1100 volts grade of size 4 sqmm two runs of multistrand unsheathed PVC insulated cable (Red colour cable used for live connection & Black colour cable used for neutral connection) and 4 sqmm copper multistrand conductor 1100 volts grade multistrand un-sheathed PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC conduit of size 25mm dia for including of all accessories complete all as specified and directed. Note : Two runs of 4 sqmm and one run of 4 sqmm cable with PVC conduit shall constitute one unit.

All as per item no 138 here-in-before but with 6.0 Sqmm

All as per item no 138 here-in-before but with 10.0 Sqmm

All as per item no 138 here-in-before but with 16.0 Sqmm

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 500 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

Supply and fixing for earth continuity conductor of 25x4 mm galvanised iron strip with saddle and fixing screw for conductor above ground, complete all as specified and directed.

Supply and fixing in repairs main stream battens fitting LED 20 watt tube 4 feet long, complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed. Make:Jaguar Cat No-Cat No-LGLZ01X020XW - or equivalent in phillpes/ Havelles/ Bajaj

Supply and fixing in repair main stream battens fitting LED 10 watt tube 2 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed.Make Jaguar Cat No-LGLZ01X010XW- or equivalent in makes phillpes / Havelles/ Bajaj.

S & F for wall security light LED type 35 watt complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as specidied and directed. CAT Part No.LSTO-25-CDL 35watt of Make CG or equivalent in makes Phillips /wipro / Bajaj.

S & F for PVC blanking plates for MCB DB to cover the unused space of MCB DB complete all as specified and directed.

M/S. CHAKRABORTY ENTERPRISE

SOVA ENTERPRISE

MARUTI ENTERPRISES

M. M. C. AND CO

GAYATRI ENTERPRISE

ROY CONSTRUCTION

NICE INFOTECH