Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹34.7 L+₹88,544.62 (2.62%)Rejected-Finance 01 AALAM E NOOR UI MASJID OLD PAHAR GAON DOLLYGUNJ POLYTECHNIC ROAD SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹36.4 L+₹2.6 L (7.58%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹36.7 L+₹2.9 L (8.53%)Rejected-Finance 30 M A ROAD M A ROAD PHOENIX BAY SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹36.8 L+₹3.0 L (8.74%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo Port Blair
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
CERTAIN B/R AND E/M REPAIR / MAINTENANCE OF MES INSTALLATIONS UNDER AGE E/M AT GE HADDO, PORT BLAIR
2022_MES_546610_1
8667/GE/H/PB
Open Tender
Civil Works
Item Rate
270 days
GE Haddo Port Blair
Class D Category a(i)
10 documents required · 10 mandatory
₹500
GE Haddo
₹70,000
Yes
6 Oct 2022
20 Aug 2022
17 Sept 2022
20 Aug 2022
10 Sept 2022
5 Sept 2022
22 Aug 2022 - 27 Aug 2022
Amount
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.
Providing precast cement concrete solid building blocks or slabs Type B1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls
Demolition of cement concrete un-reinforced, in ground floors and paving not exc 15cm thick above or below ground level complete all as specified and as directed.
Demolition of cement concrete of any description and in sunken floor / roof padding etc., not otherwise specifically provided for complete all as specified and directed .
Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out hard/dense soil, returning filling in and ramming earth or Brocken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface as in hard/dense soil all as specified and directed.
M&L for cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) for post, struts (including caps) including weathering, slightly rounded or chamfered angles and throating and including necessary form work all as specified and directed
Material and labour for providing PCC 1:2:4, type B0, using 12.5 mm graded stone aggregate as in sunken floor/ roof padding and similar work including water proofing compound all as specified and directed. Note :- WPC shall be measured and paid separately as supplied only.
M&L 15mm thick plaster on RCC roof slab and sunken portion with CM (1:3) including water proofing compound @ 3% by weight of cement shall be carried out as specified. Note :- WPC shall be measured and paid separately as supplied only.
Material and labour for preparing plastered surfaces and applying primer over cleaned roof/ sunken surface @ 0.30 Kg per sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/ Sqm over primer followed by 3 mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/ Sqm laid as per the manufacturer's instruction with side over lap of 100 mm & end over lap of 150 mm & tucked into the chases on roof, sunken slabs, edges and vertical surfaces and one coat of bitumen based paint @ 1.20 Ltrs/Sqm over APP membrane including removal of existing water proofing treatment on roofs, sunken slabs, edges and vertical surfaces complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and directed.
Material and labour for applying a coat of reflective bituminous aluminium paint @ 0.15 Kg/ Sqm over bitumen surface complete all as specified and directed.
S&F in repairs in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)).
S&F for MS galvanized with 1.0mm thick PVC coated chain link fencing 50mm x 50mm over 3.15mm GI wire complete all as specified and as directed.
S&F for 10mm dia MS round bar for tighting / securing fencing wire etc including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 5cm and dia of neck 16 to 20 mm complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified
S&F for 1.25mm thick steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with chain wheel and hand chain complete all as specified and directed.
S&F safety lever locks mild steel with 4 levers for rolling shutter all as specified and directed.
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfast and brackets, complete all as specified and directed.
Dismantling structural steel work complete all as specified.
S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for framed work such as ornamental and intricate design Gate, grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framwork of work tanks and similar work conforming to Fe-290 Gde-165
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge.
Material and labour for preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down cement plaster on brick / stone masonry wall including raking out joints, hacking for key, scrubbing down with water etc., and deposited the debris outside the MD land complete all as specified and directed.
S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified & directed by Engineer-in-Charge.
M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.(Note WPC shall be measured and paid separately)
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.
Ditto all as per item No 32 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.
M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories).
Dismantling of ceiling boarding including grid of any description fixed in any position with nails complete all as specified & directed by Engineer-in-Charge.
Taking down wooden chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified & directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each complete all as specified & directed by Engineer-in-Charge.
Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 sqm each complete all as specified & directed by Engineer-in-Charge.
Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and not exc 4 Sqm each complete all as specified & directed by Engineer-in-Charge.
Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame not exe 1.5 Sqm each complete all as specified & directed by Engineer-in-Charge.
S&F in repairs Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed
S&F in repairs factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. rail shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rai, lock rail & bottom rail on either side & as gap inserted for top & bottom rail; panellingof plain colour PVC sheet to be fitted in the M.S. framed welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawings complete all as specified and as directed.
S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified & directed by Engineer-in-Charge.
S&F extruded aluminum alloy handle fabricated type anodized upto 150mm long complete all as specified & directed by Engineer-in-Charge.
S&F Aluminum anodized barrel bolt of extruded section upto 150mm long complete all as specified & directed by Engineer-in-Charge.
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified & directed by Engineer-in-Charge.
S&F for anodized alumnium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skelton door/ window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed. Note- Wire mesh and Glass pane will be measured and paid seperately as in supply only.
Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane.
Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.
S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed
Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
S&F for anodized alumnium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed.
S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.
S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 75 mm dia PVC (SWR) grade bends of any radius
S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius
S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia.
S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.
S&F PVC (SWR) vent cowl, 75mm dia.
M&L in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with peatestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.
S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts(Make :Prayag Cat No. PIS-50H)
S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia(Make :Prayag Cat No. PIS-08H)
S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H)
S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern) with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.
S&F in repairs vitreous China squatting pan, 'Orissa' pattern size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe complete all as specified and directed.
S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.
S&F health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube, screwed for iron pipe or for brass ferrule 15mm dia or bore fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-41 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed.
Taking up or down 20mm dia steel tubing connection including cleaning for refixing or removal to store complete all as directed.
Taking up or down 25mm dia steel tubing connection including cleaning for refixing or removal to store complete all as directed.
S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.
S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.
M&L for following capacity of PVC/ RCC service tank situated at various place at any height to remove the inlet and outlet coupling connections and cleaning and removing all dirty muddy water from the service tank PVC/ RCC by using wire mesh brushes, brooms including scraping the all scale fromation neatly cleaning inside surafaces by using bleaching powder. Details of tanks like date of cleaning, capacity of tanks and due date for cleaning etc shall be written on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over a black background of size 60 x 40cm including cleaning of bottom surfaces of platform, RCC / PVC slab including replacement of the unserviceable defective inlet and outlet suitable size coupling and fittings, etc complete all as specified and directed,
Service tank of capacity upto 500 Ltrs
Service tank of capacity 700 Ltrs to 1000 Ltrs
Supply and laying in repairs for galvanized iron water tubing medium grade with all fittings laid in trenches for following sizes complete including taking down of ol GI fittings complete all as specified and directed Make : Jindal / TATA / Zenith/ Bansal
25 mm dia GI tubing
40 mm dia GI tubing
50 mm dia GI tubing
S&F in repairs in repairs Gun Metal, globe or gate valves ISI market high pressure with iron wheel head, screwed both ends for iron pipe line and fixed properly of following sizes complete all as specified and as directed. Make : Zoloto / Kartar / Venus / Laxmi / Qinn
25 mm dia
40 mm dia
50 mm dia
Taking down unserviceable float valve of 25mm dia and supply & fix float valves ISI marked of brass with brass diaphragm heavy duty screwing / thread type complete all as specified and directed.
Labour only for taking out sluice valve any make and size including re-facing, replacement of check nuts, spindles, re-grinding of shutter and re-fixing the same including providing rubber insertion sheet, gland packing rope, nuts, bolts and washers etc to make the sluice valve leak proof and free operational all as specified and directed for the following sizes: NOTE : Rate of rubber insertion sheet, nut, bolts, washers etc will deemed to be included in the quoted rate
80 mm dia
100 mm dia
Supply and fix in repair CI Sluice valve flanged of Class PN 1.6 conforming to IS-14848 complete with iron wheel head, stainless steel spindle and check nut, including jointing material such as rubber insertion nut, bolts, washer etc complete of floowing size. Make : Kirloskar / Kartar / Leader / Zoloto / Upadyyaya
80 mm dia
100 mm dia
S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.
Disconnecting existing water tanks setting aside or lowering if required for repairs, cleaning etc., and hoisting if required, reconnecting and refixing in position of capacity exc 500 litres but not exc 1000 litres complete all as specified and directed.
Supply and fix in repairs for providing 25mm dia UPVC gate valves screwed both ends for UPVC pipes complete all as specified and directed.
Taking down of damaged, loosened cement concrete/ cement mortar in walls/soffits of slabs and similar structural members up to depth of 20 to 40mm, cleaning the dismantled portion with wire brush etc remove dust , dirt and other foregin particals etc., and washing with water with pressure and applying bonding agent on old concrete surfaces all as specified and as per manufacturers instructions, over prepared surfaces provide 20mm thick high build polymer modified cement sand mortar (1:2½) mixed with 10 litres (minimum) Nitobond SBR per 50 kilograms of cement of M/s FOSROC Chemical (India ) Pvt Ltd or equivalent in Dr. Fixit or Harjas Coatings & Polymers including necessary scaffolding up to 12.0 m and including matching the existing surface with the shade of surrounding surface complete all as specified and directed.
M&L for preparation of old plastered surface of wall and applying one coat of acrylic emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surace which undulation found with wall care putty etc complete all as specified and as directed.
M&L for Cutting chases in PCC block masonry walls, for concealed water tubing etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and directed.
M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and directed.
S&F in repairs for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tile
Supply only water proofing compound ISI Marked complete all as specified.
M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).
M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).
Excavating in trenches soft loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
M&L for returning ,filling in including spreading, levelling,watering and well ramming in layers not exc 25cm in hard dense soil complete all as specified.
Removing excavated materials (soils) n exc 50m and depositing where directed at a level n exc 1.5m above the statrting point complete all as specified.
S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 1991 including cutting, drilling jointing ect complrtr including 6mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good
M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry joint free and pointed in coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified.
Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.
Taking down existing unserviceable main switches/ distribution boards of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.
Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for the following :- Make of wire : Polycab / Gloster/ Anchor / Havells/ Finolex Make of PVC casing & caping : Modi / Precision/ Supreme/ Finolex / Polycab
ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board.
M&L for Point wiring complete with 4.0 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4.0 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.
S&F switch piano, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F switch piano, flush type, single pole, one way, 16 Amps, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F socket outlet 2 in 1, 3 pin 6 Amps, flush type, universal all as specified and as directed. Make : Anchor / Cona / Legrand
S&F socket outlet 2 in 1, 3 pin 16 Amps, flush type, universal all as specified and as directed. Make : Anchor / Cona / Legrand
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F MCB DB, SPN, 8-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ HAVELLS
S&F MCB, DP, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ ABB/ HAVELLS
S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ ABB/ HAVELLS
Taking down carefully ceiling fan of make and size from its location, dismantling complete, examine complete parts throughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut, bolts, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replaceing and providing of twin core copper wire 20/1.0076 through flexible conduit from fan to ceiling rose and painting the fan with same colour of fan complete all as directed.
Taking down carefully exhaust fan of make and size from its location, dismantling complete, examine complete parts throughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut, bolts, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replaceing and providing of twin core copper wire 20/1.0076 through flexible conduit from fan to ceiling rose and painting the fan with same colour of fan complete all as directed.
Rewinding of ceiling fan motor of 1200/1400 mm sweep and M&L for rewinding with new copper winding wire of same gauge with approved quality of super enameled copper winding wire including varnishing, heating including painting of existing colour etc complete all as directed.
Rewinding of exhaust fan motor of 300/380/450 mm sweep and M&L for rewinding with new copper winding wire of same gauge with approved quality of super enameled copper winding wire including varnishing, heating including painting of existing colour etc complete all as directed.
Supply and fix sealed ball bearing suitable for ceiling fan with bearing No. 6201/6202 complete all as specified and as directed.
Supply and fix shaft suitable for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.
Supply & fix Ceiling fan blade set of 1200mm sweep complete all as specified and as directed.
M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 2 core, 10 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material etc., including taking out old unserviceable cable complete all as specified and as directed. MAKE: POLYCAB / GLOSTER / ANCHOR / HAVELLS / FINOLEX
M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 3.5 core, 25 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material etc., including taking out old unserviceable cable complete all as specified and as directed. MAKE: POLYCAB / GLOSTER / ANCHOR / HAVELLS / FINOLEX
M&L for HDPE DWC (Double wall corrugated) pipe of size 40mm (Outer diameter) x 32mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed.
S&F MCCB, 4 pole, 125 Amps, 50Hz, 25kA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release including taking down old unserviceable one complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ HAVELLS
S&F MCCB, 4 pole, 100 Amps, 50Hz, 25kA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release including taking down old unserviceable one complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ HAVELLS
S&F of LED tube light fittings with 20 watts light source in intergral module with polycarbonate/Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 lum/W THD< 15% with operating voltage range 150-300V, 50Hz with driver efficiency > 85% surge voltage withstand 2.5KV, Power factor > 0.9, energy efficient fitting surface mounted including connecting up with two / three core cable complete all as specified and directed. Make : Luker / Havells / Philips / Crompton
S&F LED light fittings of capacity 10 watts with aluminium extruded channel finished in anodised, Class I Power factor >0.9 prewired with electronic driver high translucent frosted PMMA difuser for glare free smooth lightig distribution surface mounted complete all specified and directed. Make : Luker (Cat Part No : LT510P/CG) (CCL-102-10-65-SL-DP-NWH 2ft)/ Philips (Cat Part No : Astra Line 2 ft) or equivalent make of Havells / Luker
S&F LED flood light fittings of high power LED, IP 66 protection, toughened glass, 80 Watts capacity, 220 V, 50Hz, pressure die-cast aluminium housing and Class I protection including necessary brackets of suitable size, bolts, nuts and washers as required and connected by 3 core 2.5 Sqmm multistranded copper conductor of suitable length including taking down old unserviceable one complete all as specified and as directed. MAKE: Luker (Cat Part No : LFLSL 80 or equivalent in CROMPTON GREAVES/ PHILIPS/ HAVELLS
S&F in repairs two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: JAQUAR Cat part No. FLR-5041N or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
LOOK UP ENTERPRISES
AMR TRADERS
ISLAND SALES ENTERPRISES
CARTWHEEL CONSTRUCTION
RPG AND COMPANY
M/s S A Traders
V KARTHICK
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .