Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹31.1 L+₹2.5 L (8.58%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest Tenderer | |
| 3 | L3₹31.3 L+₹2.6 L (9.05%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest Tenderer |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
14 Jun 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8950 REPAIR MAINT TO CERTAIN REPAIRS OF BARRACK WHARF AND OTHER CONNECTED ITEMS TO AND ASSOCIATED AREAS AT NAVAL DOCKYARD MUMBAI UNDER GE NW KUNJALI
2023_MES_596872_1
8950/E8
Open Tender
Civil Works - Canal
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹96,000
Yes
22 Oct 2023
19 May 2023
16 Jun 2023
26 May 2023
14 Jun 2023
31 May 2023
19 May 2023 - 26 May 2023
Amount
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Taking down cement plaster on birkc/surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work.
S & F 1st class hardwood (TEAK WOOD) any size upto( 5000 mm x300mmx150 to 300mm) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental supplied and fixed with nut bolt fastner including two coat of synthetic enemel paint over a coat of pink primer all as directed by Engineer in Charge.. Note : Sample kept in GE (NW) Kunjali.
M&L for preparation of New surfaces of wood or wood based surfaces over 10 cms width or girth and applying two finishing coat of synthetic enamel paint on wooden surfaces over Pink Primer etc complete all as specified and directed.
Supply and fix in repairs anchor bolt fastners of size 300mm long and 25mm dia including drilling holes in timber, concreting and grouting as required and directed by Engineer in charge. Note: In case of non availability of required length and dia of fastener bolt, next higher size as available in market will be used for work without any extra price adjustment.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge.
Material and labour for applying one coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over a coat of primer DEKGUARD of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- For item No 4 & 5 : Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers, slabs and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing ready mix polymer plaster and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately).
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface all as specified and directed. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture. Make : Dr.Fixit/Sunanda/chemestik/Fosrok
Material and labour Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre including cutting and filling of construction joint/expansion joints, necessary recron and formwork etc all as specified and directed.
M&L PCC 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor finished cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs, Column, Beams, Footing etc and set incement mortar 1:4, complete all as specified. (Reinforcement shall be measured and directed by Engineer-in-Charge.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal.
M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 1mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bond distemper ver a coat of wall primer all as specifed and directed.
M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even smooth all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling, applying three coats of white wash all as specified and directed.
M&L for plastering inCM 1:4, 20mm thick in two coats (15mm under coat plus 5mm finishing coat) using 3% water profing compound as per manufacturer''s instruction and finishing the surface seven and fair. (Water proofing Chemical shall be measured and paid seperately)
Supply only integral water proofing compound
M&L for preparation of newly plastered or un plastered or un plastered wall surfaces, over 10cm girth applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction
M&L for complete removal of existing plastered wall surface, over 10cm girth preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for applying thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and all as specified and as directed.
M&L for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.
M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed.
M&L PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil.
M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 31 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Dismantling wrought or mild steel work of any description.
Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment.
Supply and fix structural steel framed works such as angle, channel, grating, gate, ladder etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.
M&L in repairs Stainless steel decoravtive railings (grade 316), staircase (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing,necessary nut bolt, anchore bolt and fixing complete all as specified and directed.
M&L in repairs Stainless steel decoravtive railings chain alloy(grade 316), having 8 mm minimum thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing , necessary nut bolt, anchore boltand fixing complete all as specified and directed.
Material and labour for preparation of old steel surfaces of cranes rail trac both side cleaning and removing loosely inherent material/paint by using hand tools a wire brush/scraper (confirming to SSPC SP-2 St2) or using a power tool as a grinder (confirming to SSPC SP-2 st3) and then washing it with thinner (confirming to SSPC SP-1) of any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide primer all as specified and directed by Engineer-in-Charge.
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed
M&L for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment including 25mm thick sand all as specified and as directed by EIC.
Material and labour for preparation and applying one coat of indigo paint on Chequered tiles/Interlocking paver blocks/roof tiles Manglore pattern/CGI sheet on roof, etc. complete all as specified and directed by Engineer -in-charge.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed
S & F fibre glass reinforced translucent corrugated sheeting in 2 mm thick, with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified and as directed by EIC.
M&L for preparation of new surfaces of steel any description over 10 cms width or girth and applying two finishing coat of synthetic enamel paint over red oxide primer on steel surfaces complete all as specified and directed.
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
georson constructions
jalandhara construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .