85950 CARPETING (BITUMINIZATION) OF INTERNAL ROADS OF A AND B WING OF DAD RESIDENTIAL COMPLEX WANOWARIE RANGE UNDER GE (SOUTH) PUNE

Amount

M&L for repairs to pot holes of any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25mm in depth, making good by applying tack coat with bituminous primer (grade VG-10) @ 5 kg per XSqm putting in and providing premixed semi dense asphaltic concrete (design mix) not exceeding 30mm thick (consolidated thickness) with 5.5% binder content of bitumen (grade VG-30) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete depth of pot holes not exc. 30mm all as specified and directed by Engr-in-charge. (NOTE : Quantity of bitumen shall be provided as per design mix approved by GE.)

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and not exc. 100mm deep and removing scarified material to a distance not exc. 50 mtr and stacking property complete all as specified and directed.

M&L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, and applying evenly tack coat of paving bitumen grade (VG-10) @ 7.5 Kg per 10 Sqm by using mechanical sprayer operated by hot pressure mechanism complete all as specified and directed.

M&L for providing and laying 75mm or less thickness (consolidated thickness) premixed bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content (using paving bitumen VG-30 grade by weight of total mix) mixing bituminous macadam in the hot mix mechanical plant and laid with mechanical paver complete rolled with 8 to 12 tonne power roller to required camber and gradient complete all as specified and as directed. (NOTE : (i) Mixing of BM shall be carried out in Hot Mix plant & laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver. (ii) The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate. (iii) The quantity of bitumen shall be provided as per design mix approved by GE)

M&L for preparing existing black top surfaces of road using pressure compressor for cleaning and removing cacked mud etc sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer VG-10 grade @ 2.5 Kg /10Sqm on black top surface with mechanical sprayer operated by hot pressure mechanism complete and providing and laying bituminious premixed asphaltic semi dense concrete (Design mix) 30mm thick (consolidated thickness) with 5.5% paving bitumen of grade (VG-30) binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed. (Note :- (i) Mixing of SDAC shall be carried out in Hot Mix plant and laying, spreading of SDAC shall be carried out uniformly by using automatic type sensor paver. (ii) Quantity of the Bitumen shall be provided as per design-mix approved by GE. (iii) Design mix for SDAC considering bitumen content as specified shall be carried out by Contractor from any one of the institution as specified in Particulars Specifications. (iv) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.)

M&L for applying thermoplastic paint 2.5mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MORTH & BIS specification, not less than 2.5 mm thick of white/golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as specified and directed.

S&F in repairs solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm with (shank of 65 mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargable battery (1.2 V/1600MA) consisting super bright LED with 10000 to 18000 mcd complete as manufacturer's instruction etc. shell each with 03 LED on each side with compressive strength up to 20 tonnes fixing by epoxy including taking out old unserviceable cat eyes/studs of any description complete all as specified and directed. (NOTE : (i) Sample / make of solar cat eye shall be got approved from GE by the Contractor before placing bulk order. (ii) Old unserviceable stud / cat eyes shall be contractor's property as per schedule of credit.)

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturer's instructions including taking out old unserviceable road stud / cat eyes of any description complete all as specified and as directed. (NOTE : (i) Sample / make of cat eyes solar reflective type shall be got approved from GE by the Contractor before placing bulk order. (ii) Old unserviceable stud / cat eyes shall be contractor's property as per schedule of credit.)

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (Using 40 mm graded stone aggregate) as in sub base / flooring complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made (ISI Marked) chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the crushed stone sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with crushed stone sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including taking out old unserviceable interlocking paver blocks of any description etc. complete all specified as directed. (NOTE : Colour / Design & Pattern of interlocking Paver bocks shall be approved by GE in consultation with users. Contractor shall get sample approved from GE prior placing bulk order.)

M&L for continuous Brick edging with width equal to the length of brick laid dry on edge vertically with fly ash bricks complete all as specified and directed.

PAL CONSTRUCTION (BID ID -3403347)

Aadarsh Bharat Enviro Pvt Ltd (BID ID -3392614)

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED (BID ID -3389517)

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3389486)