SPL REPAIR OF ROAD MAIN GATE TO OFFICER MESS AT EME BN, INTERNAL ROAD OF MDSR AND SPL REPAIR OF ROAD FROM DUNN BRIDGE TO ENTRANCE GATE OF MDSR UNDER GE TENGA

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, but making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, binded with 0.09 cum of stone chipping, 6.3 mm size and again well ramming (incl supply of premixed macadam, binder and chipping) depth of pot holes exc 30 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm depth exc 50mm and not exc 100mm deep.

M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) using granite, trap or bassalt spread, rolled and consolidated to gradient and camber required with power roller of capacity 8 to 10 tonne complete all as secified and directed.

M & L for Preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of paving bitumen at 10 kg per 10 sqm complete all as specified and directed.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with bituminous primer of paving bitumen @ 5 kg per 10 sqm complete all as specified and directed..

M&L for Bituminous premixed carpet, 30mm consolidated thickness by Mechanical Paver, with 0.40 cum. of stone chippings mixed with 21.90 kg of binder, rolled and compacted to required camber and gradient and applying premixed sand seal coat with 0.06 cum of sand mixed with 6.8 kg of paving bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply only Polycarbonate Convex Mirror (80cm dia) make 3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked, polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5mtr above ground surface and 60cm below ground incl PCC foundation of size 30x30x60cm with PCC 1:3:6 type C1 bottom part of MS pipe welded with 5mm thick 125mmx125mm MS plate for anchorage in PCC , MS pipe shall be painted stove enamelled paint over a coat of red oxide, incl necessary earthwork excavation in any soil,removed and disposal of spoil complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for Providing, cement concrete type B-1, 1:2:4, (20mm graded agg) as in edging or mud stops, rounded or chamfered on edges complete all as specified and directed.

M/S Karkies Construction & Co. (BID ID -3143732)

M/S MURPHEW ENTERPRISES (BID ID -3143597)

M/S ASHOK CONSTRUCTION (BID ID -3143589)

M/S N D ENTERPRISE (BID ID -3143600)

M/S R N ENTERPRISES (BID ID -3143603)

M/S SUNRISE CONSTRUCTION AND CO (BID ID -3143606)

M/S KUNKAPU ENTERPRISES (BID ID -3143592)