Construction of office cum residence at Khaltsi Sub-Division including compound walling Allied Works viz interlocking tiling of pathways local toilet and landscaping at available land PDD

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Soling: Dumping of Stone

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size)

12mm cement plaster of mix : 1:4 ( 1 cement :4 fine sand) external wall

12 mm cement plaster finished with a floating coat of neat cement of mix : internal wall

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

Applying priming coats with primer of approved brand amd manufature having low VOC (volatile Organic Compound) content : with water thinkable cement primer on wall surface having VOC content less than 50 grams /liter.

Finishing walls with water proofing cement paint of required Shade on New work (two or more coats applied @3.84 kg /10 sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing of Steel gate complete job including painting, priming loading unloading along with pillars if required Steel gate 15 ft x 6ft size

Reinforce cement concrete work in walls (any thickness) including attached pilaster ,plinth and string courses ,filets ,column ,pillers piers,abutments ,posts and struts etc upto floor five level excluding cost of centering shuttering ,finishing and reinforce cement (1:1.5:3) (1 cement ,1.5 coarse sand: 3 graded stone aggergate 20 mm nominal size )

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforcement cement for RCC work including Straightening ,cutting,bending,placing, in position and bindind all complete

Centering and shuttering including srtutting and propping etc and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing/Fixing of 1000 Lts Capacity Pvc Water Tanks (Triple Layer) of Isi Mark/Iso 9001

Providjng and fixing of 1.5HP motor to lift the water from ground floor to top floor

Providing and fixing of Shingstak complete job

Carriage of material by MT from source to site of work including loading, unloading complete job Cement & Steel ---------------10 Km

Carriage of material by MT from source to site of work including loading, unloading complete job aSand and aggregate --------10 Km

Carriage of material by MT from source to site of work including loading, unloading complete job Stone 10 km avg

M/S JIGMET NAMGAIL (BID ID -133936)

M/S STANZIN CHOTZANG (BID ID -134051)

M/S TSEWANG TASHI (BID ID -134015)

M/S TASHI GIALSON (BID ID -134005)