Providing ETP with related Civil works for workshop at Urdhan OCM under Nehariya Sub Area

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources). specified grade excluding the cost of centering and

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding allcomplete upto plinth level. Hot rolled deformed bars

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing GI chain link fabric of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction of E/I made of GI wire of dia.4 mm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Cleaning of perfectly verical bore hole for 200/150/115mm diameter bore hole up to 60 mtrsdepth below round level including transportation installation and removing of Drilling machine

Cleaning of perfectly verical bore hole for 200/150/115mm diameter bore hole up to 60 mtrsdepth below round level including transportation installation and removing of Drilling machine Add to item no.14 abovecleaning beyond 60m depth.

Develompment of gravel packed tube well by Air Compressor of suitable capactiy including hire charges for all the required tools and plants etc complete for maximum duration of eight hours

Construction of sokage pit of 70cm dia and 1.0m deep inluding excavation brick lining at top in 1:4 cement moterils and labour and curing etc complete

Supplying & installation of Energy effeicant five star BEE rating ISI Marketed required capacity single phase 50Hz ,220v deep well sbersible pump stainless steel body suitable for 4"/6" tube well with contral panel strter suitable for submersible pump with ry run protection connections including clamps bore cap etc as required as per specifications but excluding pipe SS/ Nylon wire rope and connection cable 1 HP with up to 5 stages Head Mt 35--15 Discharge LPM 40-125

Supplying & installation of Energy dfficiant five star BEE rating ISI marked required capacity single phase 50 Hz 415v deep well submersible pump stainless steel body suiable for 6" tube well with contral panel stater suitabel for submersible pump with dray run protection single for submersible pump with dry run protection sindle phase preenter connections including clamps bore cap etc as required as per specification but excluding pipe and connection calbe 7.5 HP with 15 stages head mt 138-60 discharge LPM 60-270

Providing and fixing of ISI marked PVC insulated tree core flat copper cable. 6.00 sq mm

Providing and fixing GI Pipes complete with GI fittings and clamps I/c cutting and making good the walls etc internal work Exposed on wall 50 mm dia nominal bore

Providing installing and commissioning of 5.0 KLD ETP including raw water pump, mixer, electic panel with cable, internal pipe line, filter media, filter feed pump, multigrade filter, activated cabon filter, dosing tank, reactor bar screen, chamber and plants and machineries required for 5.0 KLD ETP for smooth handling of Effluent etc as per instruction of E/I

Operation, Repair and mainteance of ETP including cleaning of plant, working area, operating all switches, filling water in tank, cleaning the katcha and pacca drain, removing of jungle, grass around the premises of ETP etc all complete as per instruction of E/I (365 days - 60 Sunday and Public Holidays)

Total impact of GST for the purpose of CTC

SANJAY SINGH

D D S Buildcon