PROVN OF 06 X LED FLOOD LIGHTS AT VOLLEY BALL COURT IN SAGAT SINGH STADIUM UNDER GE (A) UTILITY

Amount

Supply and fix LED flood light fitting, 120 Watts, 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing, comprising of LED with individual optical lens, electronic driver with THD <10%, high efficiency 110 lm/W and PF more than 0.90, confirming to IP 66 incl 3 runs 1.5 sqmm copper cable from gear / control box to fitting connector block through PVC conduit and along with necessary MS clamps, nuts, bolts, and washers etc all as directed by Engr- in-Charge. MAKE :- Crompton Cat part No -LFLN-120-CDL/60-M or Philips/Havells/Bajaj/Wipro. Note : LED light should have separate LED driver and surge protector.

Supply and fix security light junction boxes of dimension 250mm×140mm×100mm, with shockproof, rustproof, termite resistant, weather proof, cable entry from bottom , pole mounting arrangement along with 3 phase 4 wire almunium busbar with insulators and MCB SP - 6 amps-2 nos, MCB SPN-20 amps-1 no rating with provision of MCB, Cable Glands incl three core copper cable with pvc conduit from junction box to existing LED fitting. Make :Sintex/Hensel/Neptune

Material and labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws type 410 SP-31 (9.00 metres long) as specified including erection complete all as specified and directed at site.

Laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 Sq mm 2 Core/ Suitable size as required at site and as directed y Engr-in-Charge. Note:- LT XLPE cable will be issued by department free for fixing under Sch 'B'.

Material and labour Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as directed by Engineer-in-charge.

Material and labour Cement concrete (1:3:6) type C -1 using 20 mm graded stone aggregate set in cement motor 1:6, for pedestal of poles/copping including necessary frame work ,fair finishing to exposed surfaces using extra cement complete form, all as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in depth for, erection of poles and not exceeding 3 m in depth and getting out soft/loose soil complete all as directed by EIC.

Material and labour for sand cushioning to underground cable screened un-washed river sand and punning for cushioning to cable all as directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil.

Removing of excavated soil not exc. 50 M and depositing where directed at a level n. exc 1.5 M above the starting points all as directed by EIC.

Material and labour for steel structure, cross arms bracing supports ,clamps, back plates of any type, section incl. nuts, bolts, washers, welding ,bending cold or hot in any size and shape all as directed Including two coats of aluminium paints over a coat of red oxide primer incl preparation of surface all as directed by Engr-in-charge.

M&L for GI tubing medium grade (ISI) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nuts bolts etc all as specified and directed of following sizes:- (a) 40 mm dia Make : Jindal/ Tata/ Prakash Surya

M & L for rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows. Reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, MS clamps for fixing with pole etc of size 20 mm dia complete all as directed by EIC.

BHARAT NIRMAN INFRASTRUCTURE COMPANY

chhaba construction

Shree Karni Construction

Sachiyay maa Electricals