WBPWD/EEII/KNHED/NIQ-171/23-24

Amount

Dismentling the existing E.I. work by Co's own tools & tackles by maintening normalcy as far as possible as per direction of EIC (carrying cost for all dismentled materials to the section store & cleaning of scrap materials from the working site upto the nearest dumping area included)

A. Distribution wiring Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) partly in 20mm size PVC rigid conduit 'FR' (Precision/ Polycab make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch (Make-Anchor penta/ Havell's Reo) fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] Vide page no E-16 item no 6 (No extra wire for circuit wiring of UPS points will be provided) a. Av. run 10 mtr

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm/25mm size PVC rigid conduit 'FR' (Precision/ Polycab make) incl. necy. fittings as required Vide page no E 14 Item no 1.a a. 2 x 1.5 sqmm + 1 x 1.5sqmm

b. 2 x 2.5 sqmm + 1 x 1.5sqmm (for computer board, PP)

c. 2 x 6 sqmm + 1 x 4 sqmm ( from PBDB to LBDBs)

d. 4 x 6sqmm + 2 x 4sqmm (for 3nos ph & N as ECC for A.C. Loop box to ODU terminal) (in 25mm size PVC conduit)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S Vide page no F5 Item no 9 a. 2.5sqmm

b. 4.0sqmm

c. 6.0 sqmm

B. VTPNDB,HTPNDB,SPNDB & others Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/L&T/Schneider/ABB/Siemens) 2+12 way as to GS Vide page no D-9 item no 13 (4nos Raw power + 2nos UPS power)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/L&T/ Schneider/ ABB/ Siemens) , 6 way,Enclosure as to GS Vide page no D-10 item no 14 (2nos for raw light + 2nos for raw power + 1nos for UPS power+ 1nos UPS light)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/L&T/Schneider/ABB/Siemens) , 8 way upto 160A, as to GS, vide page no D-11 item no 15 (1no each for Light & power & 1no for AC load)

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection (Make-Legrand/L&T/Schneider/ABB/Siemens), as to GS. Vide page no D-5 item no 6 i) 415V,63A FP for PBDB

ii) 240 V, 40A DP for LBDB

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-Legrand/L&T/Schneider/ABB/Siemens), as to GS. Vide page no D-6 item no 7 i) 6A - 32A SP MCB for PBDB & LBDB

ii) 63A TP MCB for VTPNDB

Supplying and fixing 415 V Four Pole MCCB ofBreaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Make-Legrand/L&T/Schneider /ABB/ Siemens) ,as to GS Vide page no D-8 item no 10 a) 125A,FP for VTPNDB

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make-Legrand/L&T/Schneider/ABB/Siemens) as to GS Vide page no D-12 item no 16 a. 8 way VTPNDB

b. 6 way HTPNDB

C. Plug & socket Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Make-Anchor penta/ Havell's Reo) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish as per G S Vide page no -E-10 Item no-4.a. i. & v. a. On Board

b. Separate plug (average run 7.5 mtr)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on sheet metal switch board on wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS. Vide page no E 6 Item no 22

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch (Make-Anchor penta/ Havell's Reo), indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S& F 240x200x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS. Vide page no E 7 Item no 26

Supply & Fixing 240 V, 4 nos. 20A plug socket with separate 4 nos. 20A Piano key type switch (Make-Anchor penta/ Havell's Reo), indicator & 20A switch type SP MCB (approved make) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS vide page no E-8 item no 32

D. Supply of cables :--- Supplying and Delivery of following sizes Al. armoured PVC/XLPE cable (make-- Havells/Gloster/KEI/Polycab/RR kable) as mentioned below : a. 4 core 25 sqmm (from VTPN to PDB)

b. 4 core 16 sqmm (from AC VTPN to AC ODU via starter and C/O switch)

E. Laying of cables :--- Laying of cable of following sizes on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as mentioned below as to GS:- Vide page no F 1 Item no 2 a. 4 core 25 sqmm (from VTPN to PDB)

b. 4 core 16 sqmm (from AC VTPN to AC ODU via starter and C/O switch)

Laying of cable of following sizes on existing cable tray and binding with suitable size GI wire incl. with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, as mentioned below as to GS:- Vide page no F 3 Item no 6 a. 4 core 25 sqmm (from VTPN to PDB)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: (Vide page no F-4 item no 7) a. 4 core up to 16sqmm

b. 4core upto 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (Vide page no F-5 item no 8b) a. 4 core up to 16sqmm

b. 4core upto 25 sqmm

F. Supply of Light fittings S/D 4feet single commercial LED type fluroscent light fittings (make-- Philips TMC 502 1xT-LED 22W/ CG Eco-I IGP161LT8-16 1XT8/Wipro WIO921208P/Bajaj BLRB-DB-118) complete with all accessories with 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 18W, 2100lm 865 T8 (ve)/ Crompton LT8-20-865-(2) ULTRON// Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED)

S/D 4feet twin commercial LED type fluroscent light fittings (make-- Philips TMC 502 2xT-LED 22W/ CG Eco-I IGP161LT8-16 2XT8/ Wipro WIO922208P) complete with all accessories with 2X18/20 Wt (Make-Crompton LT8-20-865-(2) ULTRON/ Bajaj BLRB-DB-118) LED tube lamp corresponding to (Make- Philips MAS LED Tube 18W, 2100lm 865 T8 (ve)/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/ Bajaj BLRB 20W CW LED)

G. Fixing of Light Fittings Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Vide page no C-2 Item no 17

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Vide page no C-2, Item no 16.

H. Supply of Fan S & D 250 V 50 HZ, 85watt, 18" (450 mm) high flo (RPM-- 1420) non-oscillating type metal body Air circulator fan (Make -EPC/Usha Dominaire wall fan/CG ACVORTEX18WM/ Orient Thunderstorm wall )

S & D 250 V 50 HZ, 85watt, 18" (450 mm) high flo ( air delivery-- 4500 CFM, RPM-- 1420) non-oscillating type metal body Wall Bracket fan with inbuilt regulator, double ball bearing, intergally cast LM6 impeller (Make -EPC)

S & D 230V, 1400 RPM heavy duty exhaust fan (Make -- EPC/ USHA,S.Ph TURBO Heavy duty,1400RPM,ISI Grey/ Orient Heavy duty/CG EXHD300-4-1) of following sizes 12" (300mm)

I. Fixing of fan fittings Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting (As per drawing no 475 of PWD specification book---May 1991) Vide page no D 14 Item no 29

Supply & Fixing Socket type fan regulator (Step type) (Make-Anchor penta/ Havell's Reo) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. As to GS vide page no E-6 item no 18b.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush, etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S. Vide page no C-3, Item no 21.a.

S&F fan down rod (14 SWG) incl. necessary connection wire (2X1.5sqmm cu wire) and painting the down rod as per direction of EIC

Fixing only 18" (450 mm) dia air circulator fan on wall incl. S & F necy. MS fastner, nuts & bolts etc. as reqd.

Fixing 18" (450 mm) non-oscillating type metal body Wall Bracket fan with necy. 5 mm MS fastner, including wooden board as per sample provided by the Dpt & 20mmX3mm clamp, anchor fasterner etc as per direction of EIC

Fixing exhaust fan of following sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia incl. Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS Vide page no C 4 Item no 28 a. 12" (30 cm)

J. Miscelleneous :--- S&F 415V, 3 phase, 50 Hz A.C starter unit in SS enclosure make :-- L&T ( Cat. No-- MU-G10H DOL starter) with relay range 20-32A incl. S&F Analog/digital time switch LT make 10 - 240 VAC 1 C/O Base/DIN 25 ON/OFF Each cat no-- 67DDT0 -- 1no, on channel and 2 no cable end box

S & F PVC water proof looping cable box (make -Sintex, size--250X200X105 mm) having hinged type PVC top cover having 4 mm thick rubber gasket lining & earthing terminal etc .The box should comprising of 1 no. din rail for fixing of 415V, 63A, 4P MCB (make-- L&T) and 63A 4 way Terminal bar etc. complete with all accessories as per direction of EIC.

Supplying and fixing 415V, 63A FP onload Change over switch (make--L&T/Seimens/Schneider) with sheet steel enclosure on angle iron frame on wall with nuts bolts etc as per rating as per GS Vide page no D 2 Item no 3.a a. 63A

Supply and installation of Sub-Main Distribution Board (SMDB) for power distribution consisting of following components : (a) SMDB Type - 8 ways (Make : L&T, Type TN630D O/G 250A 8Ways, cat no- DA62D1084CZZ0 or equivalent model/cat of Legrand/Havells/Siemens/ABB as approved by E.I.C) -- 1 no. (b) Incoming Device - 3 pole250A MCCB (Make : L&T, Type DN1- 250C 3 pole MCCB 250A , cat no -CM90638OOPO or equivalent model/cat of Legrand/Havells/Siemens/ABB as approved by E.I.C) -- 1 no. (c) Outgoing Device - 3 pole100 A (Make : L&T, Type DN0- 100C 3 pole MCCB 100A , cat no -CM91612OOKOOG or equivalent model/cat of Legrand/Havells/Siemens/ABB as approved by E.I.C) -- 2 nos.

d) Outgoing Device - 3-pole63 A (Make : L&T, Type DN0- 100C 3 pole MCCB 63A , cat no -CM91612OOHOOG or equivalent model/cat of Legrand/ Havells/Siemens/ABB as approved by E.I.C) --6 nos. (d) Bottom Cabling box for SMDB ( Make -: L&T type TN630D, cat no-- CM91062OOOO or equivalent model/cat of Legrand/Havells/Siemens/ABB as approved by E.I.C) -- 1 no. (e) Meter Extension box for SMDB ( Make -: L&T type TN630D, cat no-- CM91064OOTO or equivalent model/cat of Legrand/Havells/Siemens/ABB as approved by E.I.C) -- 1 no. (f) Side Cabling box for SMDB ( Make -: L&T type TN630D, cat no-- CM91120OOFO & CM91121OOFO or equivalent model/cat of Legrand/ Havells/Siemens/ABB as approved by E.I.C) -- 2 nos.

(g) Corner box for SMDB ( Make -: L&T type TN630D, cat no-- CM91089OOOO or equivalent model/cat of Legrand/ Havells/Siemens/ABB as approved by E.I.C) -- 4 nos. (h) Mounting base for SMDB ( Make -: L&T type TN630D, cat no-- CM70260OOOO or equivalent model/cat of Legrand/ Havells/Siemens/ABB as approved by E.I.C) -- 1 nos. (i) 250/5 Amp ratio C.T (Kappa) -- 3 nos. (j) LCD Multifunction Digital Panel Meter [L&T cat no.-WL500011OOOO or equivalent cat of SIEMENS / schneider] -- 1 set ( k) 1 phase LED Ammeter [L&T cat no.-WL131010OOOO or equivalent cat of SIEMENS / schneider] -8 set (l) 230V R.Y.B. LED indicator lamp -(SIEMENS/L&T) ---- 3 nos. The SMDB have to installed by the agency with necessary arrangements.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support with 25X25X3mm angle iron support Vide page no D-14 item no a.ii. i. 300X50X1.25mm (18SWG)

S&D of 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 18W, 2100lm 865 T8 (ve)/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED)

(Rate should be quotated including all taxes and duties and GST)

STANDARD BUILDERS

AVO ENGINEERING ENTERPRISE