PROVN OF DOUBLE CHAIN LINK FENCING FOR SEPARATION OF TECHNICAL AREA AND DOMESTIC AREA AT AF STATION ADAMPUR

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, ramming and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Supply and Fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165.(Size of angle iron posts 65x65x6mm ,Flat iron 50x 6mm and 10 mm dia plain round bars for securing wiremesh) complete all as specified and directed.

Supply and Fixing Mild steel screw bolts(machine made)with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long and dia of neck 5 to 10 mm size complete all as specified and directed.

Supply only chain link fencing 50x50 mm mesh or cages with 4 mm dia MS wire all as specified and directed by Engr in charge. Note. Fixing shall be measured and paid separately.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed..

Supply and Fixing Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply and fixing punched tape razor edge concertina coil, stretch coil dia 900 mm, consisting of spirals with sharp edged tape of 0.5 mm thick, crimpled to 2.6 mm dia high tensile steel wire duly galvanized as per IS-4454 with scrapper barb, having 55 spirals per coil and fixed with galvanised 'J' clips, laying along the chain link fencing and angle iron posts complete all as specified and directed. Note : MS frame work shall be measured and paid separately.

Material and Labour for preparation of new steel surfaces, priming with red oxide and applying two coats of synthetic enamel paint on iron surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed..

Material and Labour for preparation of new steel surfaces, priming with red oxide and applying two coats of synthetic enamel paint on iron surfaces of any description, n exc 10cm in width or girth,not otherwise described complete all as specified and directed..

Material and Labour for applying two coats of black bituminous paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc. exceeding 10 cm in width or girth complete all as specified and directed..

Surface dressing not exc 15 cm deep of soft/loose soil icluding getting out and removal surplus soil n exc 50 mtr from the starting point and making good surface complete all as specified and directed..

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m depth for foundation etc.n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in , including spreading,levelling,watering and well ramming in layers n exc 25 cm complete all as specified and directed..

Removing excavated material soils n.exc 250 mtr and n exc 500 mtr and depositing where directed complete all as specified and directed.

Material and Labour for cement concrete Type D2 1:4:8 ( 40 mm graded aggregate) in foundation,filling and mass conctere complete all as specified and directed.

Material and Labour for Reinforced cement concrete (nominal mix) type B1 1:2:4 ( using 20 mm graded stone aggregate) as in foundations and columns complete all as specified and directed..

Material and Labour for TMT steel bars, 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and Labour for TMT steel bars, 8 to 10 mm dia , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface of concrete, complete all as specified and directed. .

Material and Labour for Rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces i.e leveling/edging the disturbed places/edges using sand paper and using necessary filling of Birla/JK wall care putty to obtain smooth regular/even finish and applying two coats of Ist quality exterior acrylic emulsion paint, complete all as specified and directed.

Framed work Fe 410-W (Gde E 250) quality - A as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed..

Material and Labour for Plates Fe 410-W (Gde E 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.. .

ELECTRA ENGINEERS

M/s Sahib and Company

M/s BHUPINDRA ENGINEERING WORKS

LABH SINGH AND SONS

CHOUDHARY AND SONS

siddharthenterprises

SUBASH MAHAJAN