Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹721.9 CrAccepted-AOC | ₹721.9 Cr Quoted ₹766.6 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹790.7 CrRejected-Finance | ₹790.7 Cr | L2 | Rejected-Finance L2 |
| 3 | Rejected-Technical CRYSTAL TOWER 4TH FLOOR TELIBANDHA RAIPUR | RAIPUR | RAIPUR | CHHATTISGARH | - | - | Rejected-Technical NON RESPOSNIVE |
| 4 | Rejected-Technical 14 BILASIPARA P O P S BILASIPARA DIST DHUBRI ASSAM PIN 783348 | DHUBRI | ASSAM | 783348 | - | - | Rejected-Technical NON RESPONSIVE |
Tender Value
Refer Docs
EMD Value
₹6.9 Cr
Closing Date
24 Jan 2024, 5:00 pmClosed
Executive Director
e-Procurement Cell, Jharkhand State Building Construction Corporation Ltd., Beside Jharkhand Mantralaya, Dhurwa, Ranchi-834004.
Construction of 500 Bedded New Medical College and Hospital at Bokaro District
2024_JSBCC_80000_1
JSBCCL/97/2023-24
Open Tender
Civil Works - Buildings
1080 days
Bokaro
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
₹6.9 Cr
JSBCCL Ranchi
7 Feb 2024
4 Jan 2024
25 Jan 2024
4 Jan 2024
24 Jan 2024
4 Jan 2024
8 Jan 2024
Amount
Carriage of Materials by Mechanical Transport Including loading, unloading and Stacking
Earth 5 Km Lead
Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/l Extra for earthwork in hard soil as per specification and direction of E/I (Vide classification of soil item_B)
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
Ordinary rock
Hard Rock(requiring blasting)
Hard rock (blasting prohibited)
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Filling In foundation trenches and plinth In layers not exceeding 150 mm. thick well watered, rammed, fully compacted and flne dressed with earth obtained from excavation of foundation , trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of Ell (Mode of measurement compacted volume).
providIng coarse clean sand In filling in foundation trenches or In plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour. royalty and taxes all complete as per building specification and direction of Ell ( Mode of measurement compacted volume).
Excavating trenches of required width for pipes, cables, etc including excavation for sockets,depth upto 1.5 m, including getting out the excavated matterials, returning the soil as requred in layers not exceeding 20 cm in depth including consolidating each deposited layers by by ramming, watering,etc. and stacking serviceable material for measurements and disposal of unserviceable matterial for measurement and disposal of unserviceable matterial as directed within a lead of 50m:
Ordinary rock
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Hard Rock
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All Kinds Of Soil
Supplying chemical emulsion in sealed containers including delivery as specified.
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
Supply and stacking of Fly ash conforming to IRC- 58 at site including carriage, loading , unloading & stacking up to any lead (measured stacks will be reduced by 20% for payment).
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer –in- charge, including compacting each layer by rolling/ ramming and watering , all complete as per drawing and direction of Engineer -in - charge.
Supplying and stacking at site.
Good earth
Providing P.C.C. M-75 with nominal mix of (1: 4:8) in foundation with approved quality of stone metal grade - III ( 50 mm to 25 mm) size clean coarse sand -chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3, incIuding Screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and dIrection of Engineer-ln-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stoneaggregate 20 mm nominal size).
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
Centering and shuttering including strutting, propping etc. and emoval of form work for :
Foundations, footings, bases for columns
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
Providing precast R.C.C. M- 200 with nominl mix of (1:1:5:3)slab of desired size with pproved quality of stone chips and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (bu excluding the cost of reinforcement ) taxes and royalty, all comjjplete as per building specification and direction of E/I.
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
JSOR ITEMS (Steel Reinforcement)
Providing Tor steel reinforcement of 8mm. dia rods as per approved design and drawing -do- -do- TMT Fe 500 (Only valid for SAIL & TATA Steel, JSPL, Electro Steel Ltd. And Vizal Steel)
Providing Tor steel reinforcement of 10mm,12mm & 16 mm. dia bars as per approved design and drawing -do- -do-
a) 10 mm (TMT coiI Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel steels Ltd. Bokaro and Vizag (RINL)}
b) 12 mm (TMT coiI Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel steels Ltd. Bokaro and Vizag (RINL)}
c) 16 mm (TMT coiI Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel steels Ltd. Bokaro and Vizag (RINL)}
Providing Tor steel, reinforcement of 20mm, 25mm, 28mm, 32mm dia bars as per approved design and drawing-do- -do-
20/25 mm dia,TMT bar Fe 5OO {Only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel steels Ltd. Bokaro and Vizag (RINL)}
28/32 mm dia,TMT bar Fe 5OO {Only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel steels Ltd. Bokaro and Vizag (RINL)}
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform
Shelves (Cast in situ)
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Stairs, (excluding landings) except spiral-staircases
Arches, domes, vaults up to 6 m span
Chimneys and shafts
Extra for shuttering in circular work (20% of respective centering and shuttering items)
Coloumns
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
Edges of slabs and breaks in floors and walls
Under 20 cm wide
Cornices and mouldings
Weather shade, Chajjas, corbels etc., including edges
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
Concrete of M30 grade with minimum cement content of 350 kg /cum
Concrete of M35 grade with minimum cement content of 370 kg /cum
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
Concrete of M30 grade with minimum cement content of 350 kg /cum
Concrete of M35 grade with minimum cement content of 370 kg /cum
Add for using extra cement in the items of design mix over and above the specified cement content therein.
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.
200 mm wide.
300 mm wide.
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it’s components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM 6063.)
Floor Joint of 100 mm gap
FloorJoint of 150 mm gap
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.)
Wall Joint of 100 mm gap
Wall Joint of 150 mm gap
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
Roof Joinrt of 100 mm Gap
RoofJoinrt of 150 mm Gap
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 Including providing 10 mm thick mortar joints. cost of screentng materials raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 A brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 Including providing 10 mm thick mortar joints. cost of screentng materials sacffolding, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm/230mm/300 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). (correction slip no-1 (13-10-2021)
Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening matenals, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I
Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3" in C.M (1: 6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick /mortar joints, cost of screening materials, raking out Joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all cpmplete as per direction of E/I.
Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means.
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars atevery third course of half brick masonry.
Brick edging 7cm wide 11.4 cm deep to plinth protection with commonburnt clay F.P.S. (non modular) bricks of class designation 7.5 includinggrouting with cement mortar 1:4 (1 cement : 4 fine sand).
Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level.
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.
Area of slab upto 0.50 sqm
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.
Area of slab upto 0.50 sqm
Area of slab over 0.50 sqm
Granite of any colour and shade
Area of slab over 0.50 Sqm
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Marble
Granite work.
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Wedge expansion type
Fastener with threaded dia 6 mm
Fastener with threaded dia 10 mm
Fastener with threaded dia 12 mm
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittiings such as hinges, tower bolts, handle, cleast and sand blocks and taxes all complete as per building specification and direction of E/I.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Second class teak wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
Second Class Teakwood
30 mm Thick
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws
Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings -- do ---
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
On one side only
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
Rectangular or square.
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
With ISI marked stainless steel butt hinges of required size
Second class teak wood
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete.
50 mm long
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
single rubber stoper
Twin rubber stopper
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
Triple strip vertical type
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :
35 mm thick shutters
With ISI marked stainless steel butt hinges of required size
Second class teak wood
30mm Thick Shutters
with ISI marked M.S. stainless steel butt hinges bright finished of required size
Second class teak wood
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
With 12 mm mild steel U beading
Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape. colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at al comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
Wire mesh/Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds
Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).
Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).
Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m).
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical stylle & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded).
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60mm x 60mm wide and bottom rail of 110 mm x 60 mm made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/ sqm) duly filled mineral wool insulation having density minimum 96 kg/ cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3 mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately).
Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendlyUV coating, all complete as per direction of Engineer in-charge.
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
Supplying, fitting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabricated with Joints continuous fillet welded and finished smooth. carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt )
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover
Providing and fixing ball bearing for rolling shutters.
Extra for providing mechanical device chain and crank operation for operating rolling shutters.
Exceeding 10.00 sqm and upto 16.80 sqm in the area
Exceeding 16.80 sqm in area.
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete lock 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm(box type), approved shape and section with screws instead of glazingclips and metal sash putty, in steel doors, windows, ventilators andcomposite units.
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:
Profile B
Fixing with adjustable lugs with split end tail to each jamb
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Electric resistance or induction butt welded tubes.
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S. tube.
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
Light shade pigment using white cement
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
18 mm thick.
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
40 mm wide and 4 mm thick
Extra for flooring work for each consecutive floor above first floor complete as per direction of E/I
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona,Fire Red or Dark Emperadore etc.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
Agaria White
Udaipur Green Marble
Extra for pre finished nosing in treads of steps of Kota stone/ sandstone slab.
Extra for Kota stone/ sand stone in treads of steps and risers usingsingle length up to 1.05 metre.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
Extra for flooring work for each conssecutive floor above first floor complete as per direction of E/I
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, (type II adhesive) in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm
Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm. thick base of lime morter (1:1:1) (lime putty:surkhi:coarse sand) laid over and Jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandium stone including cost of curing, taxes and royalty all complete as per building speclflcationand direction of Ell.
iv) 600X600 mm Size
Providing and laying 25mm thick kotah stone tiles In risers of steps, skirting, and pillars of approved size, texture and colour laid over 12mm. thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolilthic finish with approved quality -do-
Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.54 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of
a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 00mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.
b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for ccess floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.
c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be corrosion resistant epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and, an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
450 mm Finished Floor Height (FFH).
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75 x75 mm deep chase
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :
6 mm thick cement board
Extra for sunk or raised mouldings in the plaster of Paris (Gypsumanhydrous) ceiling.
Providing and fixing thermal insulation of ceiling (under deck insulation)with Resin Bonded Fibre glass wool conforming to IS : 8183, density24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm andwire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling ofbuilding.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
Flashings/ Aprons.( Upto 600 mm)
Gutter .(600 mm over all girth).
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint,for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointingcompounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with:
8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
Providing 12mm. cement plaster (1:3) with clean coarse sand of F.M 1.5 Including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing 12mm. Thick cement plaster (1:6) -do-
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:6 (1 cement : 6 fine sand)
Providing 19 mm thick water proofing cement plaster (1:3)-do
Providing 6mm thick cement (1:4) in ceiling with clean corse sand of FM. 1.5 do
White washing with lime to give an even shade :
New work (three or more coats)
French spirit polishing :
Two or more coats on new works including a coat of wood filler
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface inluding preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required sacaffolding washing of floors and taxes all complete as per building specification and direction of E/I
Extra for plaster work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/I.
Making 6x6mm grooves in plaster surface over walls truely horizontal or vertical as Specified at regular Intervals, at all heights including cleaning, finishing, scaffolding and curing with all leads and lifts of water all complete as per building specification and direction of E/l
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:
In two coats
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand).
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm).
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
Applying priming coat:
With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood
With ready mixed red oxide zinc chromate primer ofapproved brand and manufacture on steel galvanised iron/steel works
French spirit polishing :
Two or more coats on new works including a coat of wood filler
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
15 mm wide and 15 mm deep groove
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
Two coats
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats.
Providing two coats of Synthetic Enamel Paint of approved shade and make over steel surface
Two coats.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats.
Prollidlng one coat of wax polishing With mansion, waxpol or equivalent approved quality of wax polish over old or new wooden surface Including cleaning the surface after removing dirt -do-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
Dismantling pucca brick, or lime work including stacking serviceable material in countable stackes within 15M. Lead and disposal of unserviceable materials with all leads all complete as per directions of E/I.
Dismantling plain cement or lime concrete work including stacking serviceable material in countable stackes within 15M. Lead and disposal of unserviceable materials with all leads all complete as per directions of E/I.
Dismantling RCC work including stacking serviceable material in countable stackes within 15M. Lead and disposal of unserviceable materials with all leads all complete as per directions of E/I.
Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
Rolling with vibratory roller
Granular Sub-base with Close Graded Material (Table:- 400-1)
Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 )
for grading- I Material
for grading- II Material
Supplying and stacking at site.
90 mm to 45 mm size stone aggregate
63 mm to 45 mm size stone aggregate
Red bajri
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
Providing Tor steel reinforcement of 8mm. dia rods as per approved design and drawing -do- -do- TMT Fe 500 (Only valid for SAIL & TATA Steel, JSPL, Electro Steel Ltd. And Vizal Steel)
Footpaths and Separators (Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with precast concrete tiles in cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel.)
Providing designation 75 A brick work in C.M. (1:3) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 Including providing 10 mm thick mortar joints. cost of screentng materials raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth --do--
Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408)
Using Concrete Batching and Mixing Plant
Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
90 cm equilateral triangle
60 cm equilateral triangle
60 cm circular
80 mm x 60 mm rectangular
60 cm x 45 cm rectangular
60 cm x 60 cm square
90 cm high octagon
Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)
Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans)
Truss and Vertical Support
Aluminium alloy plate for over head sign
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade)
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc)
Ordinary Kilometer stone (Precast)
Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.)
Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified)
M 20 grade concrete
Metal Beam Crash Barrier
Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)
Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810)
Flexible Crash Barrier, Wire Rope Safety Barrier (Providing and erecting a wire rope safety barrier with vertical posts of medium weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground level, split at the bottom for better grip, embedded in M 15 grade cement concrete 450 x 450 x 450 mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm dia and anchored at terminal posts 15 m apart. Terminal post to be embedded in M 15 gradecementconcretefoundation2400 x 450 x 900 mm (depth), strengthened by a strut of RS joist 100 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm, 1.50 m long at the bottom, all embedded in foundation concrete as per approved design and drawing, rate excluding excavation and cement concrete.)
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment).
Supplying and stacking at site dump manure from approved source, including carriage up to 5 km Complete (manure measured in stacks will be reduced by 8% for payment) :
Screened through sieve of I.S. designation 20mm
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). C
In rows 5 cm apart in both directions.
Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall coMRst of four nos of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8 nos flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground , including refilling the earth, compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect.
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
Trees Plant
Shrubs Plant
Hedge Plant
Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge.
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Ficus bengaleMRs (Bargad) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of plant Beloperone species of height 30-45 cm. in poly bags of size 20 cm as per direction of the officer-in-charge.
Supply and stacking of plant Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
Supply and stacking of plant Calliandra hybrida of height 75-90 cm. with 4- 5 branches in bag of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of plant Nerium oleander variegated of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron) (correction slip no-18 (03-03-2023)
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Pre-laminated particle board with decorative lamination on both sides.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5.50 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
With stainless steel cover plate minimum 1.25 mm thickness.
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
Powder coated minimum thickness 50 micron aluminium
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineerin-charge
Powder coated minimum thickness 50 micron aluminium
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge
Powder coated minimum thickness 50 micron aluminium
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
Dumb bell with central bulb (180mm wide, 8mm thick).
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Water proofing for Old and New Roof Slab:- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with, brush, roller or spray for water proofing coating as per manufacturer specifications with following steps: (a surface preparation-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt Ltd /MYK Schomberg/Dr Fixit/Fosroc or equivallent Providing and reparing of all comers and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150 mm X 150 mm fillet of mortar (Cement: sand-1:4) admixed with acrylic polymer of Sika Fosroc/MYK Schomberg Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry ofacrylic polymer. Repairing surface irregularities, damaged concrete in base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete. (b)1st Coat Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roiler After 1st coat of application, 45 gsm of Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg / Samt/coat. For the purpose of measurement the entire treated surface will be measured." (c) 2nd Coat-To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface 2nd coat should be applied @0.7 kg/Samticoat For the purpose of measurement the entire treated surface will be measured After three days of drying the 2nd coat, the rail water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of EIC. The waterproof coating to be protected from damage before screed over it. Waterproofing Brand- Sika Topseal 109hi/Fosroc Brushbond RFX/Dr Foxit Pidiffin 2K/MYK Aquafin TG Product Performance - Chemical Base Part A Acrylic copolymer, Part B Specially graded cementitious powder- Density 1.6 kg/l (mixed density) at +27°C Tensile Strength -2 Nimm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength -2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.15) Elongation at Break -35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370) (d) Protection of treated surface with PCC-The treated surface should be covered with 25mm/ 50mm PCC of M-20 grade(1:1.5:3) with proper slope (1:120) towards the rain outlets in alternate panels of 2 mt x 2mt keeping 6 mm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 @of 100 ml per bag of of cement to be added in the screed concrete(paid separately for this items) All corners shall be chamfered with 150mm x 150 mm fillet. The rain water outlets shall be just leveled with the screed concrete to ensure smooth discharge of water the peripheral gaps between pvc pipe outlet and concrete surface should be packed property with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika India Pvt. Ltd. /MYK Schomberg/Dr Fixt/Fosroc For the purpose of measurement the entire treated surface will be measured." (e)Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately). Brand- Sika India Pvt Ltd./MYK Schomberg/Dr Foxit/Fosroc Warranty for five years.
Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening,shuttering and mixing cement concrete in mixer with admixture of integral water proofing and placing in position,striking curing,taxexand royality all complete as per building specifiction and direction of Ell.Panels that has been left should be casted next day.There should be 6 mm gap between Panels .Brand-Sika P\astocrate plus, MYK proof WP 1O,Fosroc-Conplast X4211 C,Dr.fixit Pidiproof LW+ or Equivalent .
5.12.8. Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as per drawings and technical specifications and direction of E in Charge.(with 18% GST) .Brand:-Sika-Polysulphide, Fosroc-Thioflex 600,Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivalent
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid,nstallation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 33109 testing method for a range up to 2000 ml.”
Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME330-10 testing method for a range upto 50 mm”
Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for ccupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
Earth ( 1 km)
Local Sand (3 km)
Stone Chipps & stone aggregate (22 km from Chash Bokaro)
Coarse Sand ( 10 km from Chash Bokaro)
Bricks (8 km)
Fly Ash Bricks(8km)
Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I.
580 mm long I.W.C.
Supply, fitting and fixing 40mm high vitreous white glazed earthen E.W.C with 'p' trap of parry hindustan or any other approved ISS make including supplying and fixing 15 liters CI mosquito proof low down flushing cistern of approved make with complete fittings with CI handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grams 15 mm PVC alkathene pipe 45 cm. long with brass coupling at both ends and white /black plastic solid state seal and lead of commander /cuckoo or other ISS with hinges or screws etc painting pipe and cistern etc with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I
10 ltr low PVC Cistern
Supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of Hindustan "Parry" or any other approved ISS make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams 15 mm P.V.C /Alkthene pipe 450 mm long with bras coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor, making good the same etc all complete as per specification and direction of E/I
Flat back or standing corner (600x350)
Supplying and fitting and fixing viterous white glazed earthern ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported or painted C.I. or R.S. brackets 32 mm C.I. brass waste, 15 mm dia C.I. body brass spindle stop cock of approved qaulity of weight not less than 350 grams, 32 mm P.V.C waste pipe 750 mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I
Provinding and fixing was basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required :
White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer
Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.
Kitchen sink with drain board
510x1040 mm bowl depth 250mm
Kitchen sink without drain board
610x 460mm bowl depth 200mm
Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete
Flexible Pipe
32mm Dia
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Rectangular shape 1500x450mm
Providing and fixing PTMT Bottle Trap for Wash basin.
Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.
Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms
Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931
15 mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.
15 mm nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
Providing and fixing toilet paper holder :
C.P. brass
Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required :
Size 600x450x200 mm
Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
Painting steel work with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats.
Providing and fixing MS holder bat clamps of approved design to pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
Providing and fixing PTMT grating of approved quality, colour and make 125 mm nominal dia with 25 mm waste hole
Providing and fixing PTMT grating of approved quality, colour and make 125 mm nominal dia without waste hole
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW waste pipes including bed concrete as per standard design
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
Providing & Fixing of Garden hydrant outlet consisting 1 No. 25mm dia. Ball valve,( Brass) for connecting rubber hose, pipes & fittings.
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
20 mm dia, nominal bore
25 mm dia, nominal bore
32 mm dia, nominal bore
40 mm dia, nominal bore
50 mm dia, nominal bore
65 mm dia, nominal bore
80 mm dia, nominal bore
Providing and fixing C.I. butterfly valves PN-1.6 complete with bolts, nuts, 1.5 mm thick compressed asbestos gasket and flanges as per Table “E” complete.
65 mm dia
80 mm dia
100 mm dia
150 mm dia
Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
With F.P.S. bricks
Providing & fixing in position precast RCC manhole cover and frame of reqd. shape and approved quality.
Circular shape 560 internal dia.
Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.)
15mm nominal outer dia. Pipes.
20mm nominal outer dia. Pipes.
25mm nominal outer dia. Pipes.
32mm nominal outer dia. Pipes.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Circular Tank
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
150 mm diameter
200 mm diameter
250 mm diameter
300 mm diameter
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design.
150 mm diameter
200 mm diameter
250 mm diameter
Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber with bricks of class designation 75 and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. (COVER MIN. 4.5 KG & FRAME MIN.2.7 KG )
180x150mm size P type With FPS bricks
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
150 mm dia RCC pipe
250 mm dia RCC pipe
300 mm dia RCC pipe
Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level
1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size)
Construction brick masonry manhole in cement mortar 1:4 (1cement : 4coarse sand) RCC top slab with 1:2:4 mix 9 with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5
Inside size 120 x 90 cm and 90 cm deep including CI cover with frame (heavy duty) 500mm internal dia. Total weight of cover and frame to be not less than 116 Kg. ( weight of cover to be 58 Kg. and weight of frame 58 Kg.)with FPS bricks class designation 75. (Sewerage Line)
Extra for depth for manholes
Size 90 x 80 cm
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Size 120 x 90 cm
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonary circular manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
0.91 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for seperately).
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra for depth for circular manholes 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonary circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
1.68m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for seperately).
With F.P.S. bricks class designation 7.5
Extra for depth for circular manholes 1.22m internal dia (at bottom) with beyond 1.68m to 2.29m.
With F.P.S. bricks class designation 7.5
Constructing brick masonary circular manhole 1.52m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.
2.30m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for seperately).
With F.P.S. bricks class designation 7.5
Extra for depth for circular manholes 1.52m internal dia (at bottom) with beyond 2.30m.
With F.P.S. bricks class designation 7.5
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 fine sand) including 500 x 450 mm (heavy duty) precast RCC horizontal grating with frame complete as per standard design: with FPS bricks
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 250mm dia.
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
300 mm dia
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
All types of soil
300 mm dia
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, in all leads inside the project side premises as per site plan and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kind of soil
Extra for every additional lift of 1.5 m or there part thereof in excavation/banking excavated or stacked materials.
All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, in all leads and lifts within campus as per site plan complete as per direction of the Engineer.
Providing M-30 grade concrete instead of M-25 grade BMC / RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ kg/cum)
Providing designation 75 A brick work in C.M (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints costs of screening, materials ,scafolding,rtaking out joints to 15mm depth curing, taxex and royalty all complete as per building specification and direction of E/I.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing & reinforcement with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 25mm dia nominal bore
Providing and laying non-pressure NP2 class ( light duty ) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand ) including testing of joints etc. complete : a) 450mm dia R.C.C pipe
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin-charge.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100mm dia
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
All types of soil
300 mm dia
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
All types of soil
300 mm dia
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed,
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete,for all depths, as per direction of engineer -in-charge :
200 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
100 mm nominal size dia
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp
150 mm nominal size dia
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 200 mm dia
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part
Providing and fixing 80mm dia GI pipes to IS:1239 heavy class with fittings.
Providing and fixing lever operated butterfly valve conforming to IS:13095-91 PIN 1.6 including necessary companion flanges, bolts and nuts complete.
80mm dia
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
80mm dia
Providing and fixing cast iron wafer type butterfly valves (PN-1.6) complete with 2 nos. matching flanges (Table-E),bolts, nuts, 3.0 mm thick insertion neoprene gasket.
50mm dia
65mm dia
80mm dia
100mm dia
Providing and fixing of cast iron dual plate wafer type check valves (PN-10) including 2 nos. matching flanges ( Table-E), nuts, bolts, 3.0 mm thick thick insertion neoprene gasket.
65mm dia
80mm dia
100mm dia
Providing and fixing CI Y type suction strainer with gunmetal or brass internal parts installed outside water tanks.
100 mm dia.
150 mm dia.
Supplying, installing, testing and commissioning controllers with low volatage relays, stainless steel probes and PVC shroud wiring from tank top to probles of required.
To start pump when water level is low in U.G. tank (Domestic water) and shut off pump when U.G. tank (Domestic) is full. Also to stop when water level is low in raw water underground tank.
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required..
300 mm width X 50 mm depth X 1.6 mm thickness
150 mm width X 50 mm depth X 1.6 mm thickness
Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end)
25 mm dia. Nominal bore
32 mm dia. Nominal bore
40 mm dia. Nominal bore
50 mm dia. Nominal bore
65 mm dia. Nominal bore
80 mm dia. Nominal bore
Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for stop cock, with C.I surface box 100 x 100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40mm nominal size) and inside plastering with cement mortat 1:3 ( 1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
With common burnt clay F.P.S. ( Non Modular) bricks of class designation 7.5.
Constructing masonry Chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40mm nominal size) and inside plastering with cement mortat 1:3 ( 1cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.
With common burnt clay F.P.S. ( Non Modular) bricks of class designation 7.5.
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rebber insertions etc. (The tail pieces if required will be paid seperately) :
100 mm dia nominal bore
Providing and fixing of cast iron wafer type butterfly valves (PN 1.6) complete with 2 nos. matching flanges ( table-E) , bolts, nuts, washers 3 mm thick insertion neoprene gasket conforming to IS 13095.
100 mm dia
Point wiring in PVC conduit, with modular type switch
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box as required.
Group A
Group B
Group C
Primary point controlled by one MCB.
Same as item above but Secondary point. i.e. Points to be looped with Primary point.
Power Plug wiring in PVC Conduit (2 x 4 Sq.mm)
Wiring for light/ power plug with 2 x 4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
Power Plug wiring in PVC Conduit (4 x 4 Sq.mm)
Wiring for light/ power plug with 4 x 4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
Circuit wiring in PVC conduit
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required
2 x 1.5 Sq.mm. + 1 x 1.5 Sq.mm. earth wire
2 x 2.5 Sq.mm. + 1 x 2.5 Sq.mm. earth wire
2 x 4 Sq.mm. + 1 x 4 Sq.mm. earth wire
2 x 6 Sq.mm. + 1 x 6 Sq.mm. earth wire
2 x 10Sq.mm. + 1 x 10 Sq.mm. earth wire
2 x 16 Sq.mm. + 1 x 16 Sq.mm. earth wire
4 x 6 Sq.mm. + 2 x 6 Sq.mm. earth wire
4 x 10 Sq.mm. + 2 x 6 Sq.mm. earth wire
4 x 16 Sq.mm. + 2 x 6 Sq.mm. earth wire
S/ F MS Conduit
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
S/ F PVC Conduit
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
S/ F Modular Type Switch/ Socket
Supplying and fixing following modular type switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Bell Push Universal tye
S/ F ModulaR Type Electronic Fan Regulator
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
S/ F Modular Type Blanking Plate
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
S/ F Modular Boxes, Base & Cover Plate
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (78 mm x 78 mm x 45 mm)
4/5 Module (78 mm x 140 mm x 50 mm)
S/ F Light Plug Point With Modular Type Accessories
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection painting etc. as required.
S/ F Power Plug Point with Modular Type Accessories
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/ 16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
S/ F Ceiling Rose
Supplying and fixing 2 pin, 5 amp ceiling rose on the existing junction box/ wooden box including connection etc as required.
S/ F Call Bell Buzzer
Supplying and fixing call bell/ buzzer suitable for DC/ AC single phase, 230 volts, complete as required.
Fixing Louvers Shutters For Exhaust Fan
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
Fixing Louvers Shutters For Exhaust Fan
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
S/ F MCCB In Cubical Panel Board
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board/ VTPN DB including drilling holes in cubicle panel, making connections, etc. as required.
100 Amps, 16 Ka fixed thermal setting
125 Amps, 16 Ka fixed thermal setting
160 Amps, 35 kA fixed thermal setting
200 Amps, 35 kA fixed thermal setting
250 Amps, 35 kA fixed thermal setting
S/F SP & N MCB Distribution Board
Supplying and fixing following way SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
8way, Double door
12 way, Double door
S/F TP & N MCB Distribution Board
Supplying and fixing following way TP&N MCB distribution board of 415 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
6 Way (4 + 18), Double Door Horizontal Type
8 Way (4 + 24), Double Door Horizontal Type
S/FVertical Type TP & N MCB Distribution Board
Supplying and fixing following way vertical type TP&N MCB distribution board 415 volts on surface/ recess complete with tinned copper bus bar,neutral busbar, earth bar, din ba,detachable gland plate,interconnection,phosphatized and powder painted including earthing etc as required (But without MCB/ RCCB/ Isolator).
4 Way(4+12) Double Door
8 Way(4+24) Double Door
12 Way(4+36) Double Door
S/ F 'C' Series, MCB
Supplying and fixing following rating, 240, "C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6/ 32 Amps, Single Pole
6/32 Amps DP
40 Amps DP
50/63 Amps DP
6/ 32 Amps, TPN
S/ F SP MCB Blanking Plate
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
S/ F DP MCB Isolator
Supplying and fixing following rating, DP, 240 volts, isolator in the existing MCB DB complete with connectins, testing and commissioning etc. as required.
S/ F Four Pole MCB Isolator
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connectins, testing and commissioning etc. as required.
S/ F SPN RCCB
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
S/ F 20 Amps SPN MCB Industrial Socket Outlet
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
GI Earth Pipe electrode with salt/charcoal
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
GI Earth Plate Electrode
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt )
CU Earth Plate Electrode
Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( but with charcoal/ coke and salt ) as required
P/ F 25 mm x 5 mm CU Strip in Surface/Recess
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
P/ F 25 mm x 5 mm GI Strip in Surface/Recess
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
P/ F 6 SWG G.I. Loop Earthing Wire in Surface/ Reccess
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
Laying of Cables on Cable Tray
S/ F MS CABLE TRAYS
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 62.5 mm depth X 2 mm thickness
600 mm width X 75 mm depth X 2 mm thickness
750 mm width X 75 mm depth X 2 mm thickness
S/ F powder coated of approved shade MS Cable Tray Bends
Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 62.5 mm depth X 2 mm thickness
600 mm width X 75 mm depth X 2 mm thickness
750 mm width X 75 mm depth X 2 mm thickness
S/ F powder coated of approved shade MS Cable Tray Tee's
Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee's with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 62.5 mm depth X 2 mm thickness
600 mm width X 75 mm depth X 2 mm thickness
750 mm width X 75 mm depth X 2 mm thickness
S/ F powder coated of approved shade MS Cable Tray Cross Members
Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 62.5 mm depth X 2 mm thickness
600 mm width X 75 mm depth X 2 mm thickness
750 mm width X 75 mm depth X 2 mm thickness
laying of one number PVC Insulated and PVC shethed /XLPE power Cables of 1.1 KV grade of following size direct in ground including excavation,sand cushioning and protecting covering and refilling the trench etc as required.
Up to 35 sqmm.
Above 35 sq mm and up to 95 sq mm
Above 95 sq mm and up to 185sq mm.
Above 185 sq mm and up to 400 sq mm.
Laying and fixing of one no PVC insulated and PVC sheathed /XLPE power cable of 1.1 kV grade of following size on Cable tray as required.
Up to 35 sqmm. (Clambed with 1 mm thick saddle)
Above 35 sq mm and up to 95 sq mm. (Clambed with 25 x 3 mm thick MS Flat Clamp)
Above 95 sq mm and up to 185 sq mm. (Clambed with 25/40 x 3 mm thick MS Flat Clamp)
Above 185 sq mm and up to 400 sq mm. (Clambed with 40 x 3 mm thick MS Flat Clamp)
Supply of Aluminium Cables
Supplying of following 1100 volt grade XLPE insulated PVC inner sheathed and HR PVC outer sheathed aluminium conductor armoured cables as per specification.
300 sq. mm,3.5 core
240 sq. mm,3.5 core
185 sq. mm,3.5 core
150 sq. mm,3.5 core
120 sq. mm,3.5 core
95 sq. mm,3.5 core
70 sq. mm,3.5 core
50 sq. mm,3.5 core
35 sq. mm,3.5 core
25 sq. mm,3.5 core
16 sq. mm,4 core
10 sq. mm,4 core
10 sq. mm,2 core
End Termination of Cables
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3½ x 35 sq. mm
3½ x 50 sq. mm
3½ x 70 sq. mm
3½ x 95 sq. mm
3½ x 120 sq. mm
3½ x 150 sq. mm
3½ x 185 sq. mm
3½ x 240 sq. mm
3½ x 300 sq. mm
4 x 25 sq. mm
4 x 16 sq. mm
4 x 10 sq. mm
2 x 10 sq. mm
SITC of the following lighting fixtures with all fixing accessories etc. as required.
Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
20/22W LED Tube light with all neccssary accessories as required. (BAJAJ Lighting Cat no- or equivalent
SITC of 18/20W LED Square Down light with all neccssary accessories as required(BAJAJ Lighting Cat no- or equivalent
Supply of LED mirror light with power 8/1.0W, rated voltage230V 50Hz aluminium/PC body with running life rrrinimum 30000 Hour (BAJAJ Lighting Cat no- or equivalent t as specified in the approved list of make.).
SITC of 36W (Nominal) LED 2ft x 2ft Recessed LED Fixture with all neccssary accessories as required (BAJAJ Lighting Cat no- or equivalent t as specified in the approved list of make.).
SITC of 12W LED Round Down ligbt. (BAJAJ Lighting Cat no- or equivalent t as specified in the approved list of make.).
SITC of 9/10W Bulkhead LED Fixture (BAJAJ Lighting Cat no-BIBWP 10W LED or equivalent as specified in the approved list of make).
1200mm (48") BLDC 5star rating 32W Ceiling Fan
l400mm (56") BLDC 5star rating 32W Ceiling Fan
15' (380mm) metal exaust fan.
10 KVA online UIIS three phase input and three phase outlrut power system of input Voltage range 110V AC i 5% - 300V AC t 5%, Frequenry range 40Hz - ffiHz, Power Factor > 0.90 @ full load, and output Voltage range 200y /208/20/230/240Y AC, Voltage regulation t 1%, Frequency range 50Hz n 0.25H2 or 60Hz t .30H2 Harmonic disbortion - < 2%THD (Linear load) :4% THD (non-liniear load) pfficenrw- 88/83% 20 KVA online UI€
80 KVA online UPS three phase input and three phase output powersystem of input, Voltage range 360y /380y / 400V/485V AC, Frequencyrange 40Hz - 60Hzt70%, outputVoltage range 415V t 1%, Frequenryrange 50Hz 1 1%, Power Factor 0.8/3:1, Harmonic distrortion - < 2% THD (Linear load) : 5% THD (nonJiniear load)
40 KVA online UPS three phase input and three phase output powersystem of input, Voltage range 360y /380y / 400V/485V AC, Frequencyrange 40Hz - 60Hzt70%, outputVoltage range 415V t 1%, Frequenryrange 50Hz 1 1%, Power Factor 0.8/3:1, Harmonic distrortion - < 2% THD (Linear load) : 5% THD (nonJiniear load)
5 KVA online UPS single phase input and single phase output power system of input Voltage range 110V AC i 5% - 300V AC ! 5%, Frequenry range 40Hz - 60H2, Power Factor > 0.90 @ full load, and output Voltage range 200Y /208/220/230/240V t 1%, Frequenry range 50Hz t 0.25H2 or 60Hz AC, Voltage regulation + .30H2 Harmonic distrortion - < 2% T\ID (Linear load) : 47o THD (non-liniear load) efficency- 88/83%
MS battery rack suitable for 15 to 20 UPS Battery installation
MS battery rack suitable for 40 to 50 UPS Battery installation
12V, 150Ah sealed maintenance free (SMF) battery with 24 month replacement cuarantv. 15:1652:191
MAIN LT PANEL/ SUB LT PANEL/ MDB & SDB
Supplying, Installation, Testing & Commissioning of following rating Pre-fabricated Air-insulated/Sandiched bus trucking suitable for 415 Volt 3 Phase 4 wire 50Hz AC supply with incloser having IP-54 rating ,made of 1.6 mm thick steel sheet duly powder coated in convenient sections complete with 4 no Auminum bus bar having current density of 130 A per sqcm at nominal current rating complete with bends, expansion joints, fire barriers, copper flexible end connections at both ends and contiuous Earthing with 2 runs of aluminum earth of size 25mm x 5mm strips etc. i/c necessary supports etc. as per specifications attached as reqd.
2000 A, Isc = 50 kA for 1 second
2500 A, Isc = 50 kA for 1 second
Design, fabrication, assembling, wiring, testing, supply, forwarding to site, unloading, shifting to location, inspection, installation, testing and commissioning of DG Synchronisation/ DG AMF/ DG Changeover Panel, Main LT Panel/ Sub LT Panel, Main Distribution Board & Submain Distribution Board, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, from 3b consutruction, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and/ or flats wherever necessary. 16 gauge CRCA sheet steel shall be used for final distribution panels. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 No. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication.
DESIGN, FABRICATION, ASSEMBLING, SUPPLY, LOADING & FORWARDING TO SITE OF SUB-STATION EQUIPMENT& DISTRIBUTION TRANSFORMER.
P/ F MV Danger Notice Plate
Providing and fixing MV danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
P/ F HT Danger Notice Plate
Providing and fixing MV danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
HT CABLES
Laying of 33 kV HT Cable
Laying of one number XLPE power cable of 33 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 120 sq. mm and upto 400 sq. mm
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
P/ F RCC Hume Pipe
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100 mm dia ID
150 mm dia ID
300 mm dia ID
Silent type D.G Set of capacity 125 KVA With AMF Panel IS/IEC-60034- 1 IS: 1460 IS: 13018
LIGHTNING PROTECTION SYSTEM.
CU Earth Plate Electrode
Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( but with charcoal/ coke and salt ) as required
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
Reverting, sweating and soldering lighhilng conductor tape :- Reverting , sweat+C1965ing and soldering of copper / G.I. tape (with another copper / G.I. tape required., base of the finial or any other metallic object PlF Copper
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
Supply, Installation, Testing & Commissioning of the following:
INTELLIGENT FIRE ALARM SYSTEM
Two Loop Panel.
Ten Loop Panel
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.(ABOVE & BELOW FALSE CEILING)
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit complete as required and as per direction of Engineer in Charge.
25 mm dia.
S/ F PVC Conduit
Supplying and fixing of following sizes of PVC conduit along with accessories in surfac/ recess including cutting the wall and making good the same in case of reccessed conduit as required.
TV Antenna Socket Outlet
TV cables in existing conduits
Supplying and drawing co-axial TV cable RG-6 grade copper conductor PE insulated, with PVC shealth in the existing surface/ recessed PVC conduit as required.
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housingand toughened glass cover (IP 66 protection) in existing pole/pipe for Supply voltage'1.00-270Y AC,50Hz. Luninarie shall be confirm to IS: 10322 partsection-5 / section-3 and sha-ll be complete with all neccssary accessories as required
90/100W LED Street light
S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 1C[.Z70Y AC,50Hz. Luminarie shall be confirm tolS:,1,0322part-5/section-5 and shall be complete with all neccssary accessories as required
90/100W LED Flood light
120 LED Flood ligh
S.I.T.C offollowing rating approved make LED Bollard fitting with 'cylindrical shape and inverEd cone shape head of height 600 to 850mm power input-8/9watt with dle cast aluminium housing opel with PC diffuser, lPt65/54 proEcHorl confernring to IS:10322 part 5 etc all complete as required. (excluding pllnft charge)
S.I.T.C of following rating LED Post top lamp made in die cast aluminium using with decorative clear/opal acrylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required. 40/45W LED Post top lamp opel
POLES
9 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 9030) with top dia 70 mm, bottom dia 155 mm & made of 3 mm thick sheet, base plate dimensions 250 X 250 X 16 mm ( L x,Bx T) including suitable sizes o-I'foundation bolt all complete as ,"q-d. (Without Arm)
1 m Sinele Arm suitbale for 70mm Top
1 m Double Arm suitbale for 70mm Top
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Above 8.0 metre and upto 11.0 metre
Supply of 20mtr. High mast in two section Construction 5355 grade asper BIEN 10 025 Top Dia 150mm, bottom dia 410mm, plate thickness 3mm,2Oside polygon, galvanisation as per BS EN ISO 146L, base plate dia 570mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47 m/swith 8 nos foundation bolts of PCD 490mm TS 600/ 30mm dia/850 mm long. Luminaries carriage : Material for 50 NB ERW Class B - M.S. Pipe, dia of carriage ring 535mm (ID) with 6 arm, welded,2 sections having carrying capacity upto 12 luminaries. Trailing Cable : 5 core 4sq.mm. PVC flexible copPer conductor Winch/Power Tool : Double drum, SWL 750 kg with 1HP 6 pole single speed integral motor Rope : Grade A13131'6,7 construction, dia 6mm, BLC 2350 x 2 having 2 nos of continues roPe. Aviation obstmction light: twin dome aviation obstruction lights LED Itype as required.(But excluding Feeder Pillar)
For 20 mtr. High mast: ITC of the high mast and light fixture with the help of suitable tools and plans, wiring of luminaries with all material like PVC insulate[Pvc sheathed flexible cable of suitlblb copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T / mhsq. for 20M High mast.
Outdoor stand mounted Feeder Panel with 63amp TP&N, MCB incomer. 53amp TP contactor automatic switching of luminaries, power tool control incommer outgoing terminal etc as reqd. (for high mast)
FIRE FIGHTING WORK
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration pads.
2850 lpm at 88 m Head
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
2850 lpm at 88 m Head
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
180pm at 88 m Head
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
Suitable HP 1500 RPM squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
900 lpm at 35 m Head
450 lpm at 35 m Head
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration pads.
Curtain pump
1620 lpm at 56 m Head
CONTROL PANELS
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
INCOMING
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 800A
OUTGOING
Main Fire Pump
Jockey Pump
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
All standard relays and accessories for automatic operation of diesel engine System
System control
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
150 mm. dia
Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required .
25 mm dia
32 mm dia
40 mm dia
50 mm dia
65 mm dia
80 mm dia
100 mm dia
150 mm dia
200 mm dia ( Wall thickness 6.3 mm )
250 mm dia ( Wall thickness 6.3 mm )
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required .
40 mm dia
80mm dia
100mm dia
150mm dia
200 mm dia
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete a required.
Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required .
80mm dia
100mm dia
150mm dia
200 mm Dia
Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange .
250 mm dia
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Gun Metal
Supplying and Fixing First aid hose reel with MS Construction Spray painted in Post office red conforming to IS : 884 complete with the following as required
20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type - 2 as per IS : 12585
20 mm nominal internal dia gunmetal globe valve and nozzle
Drum and Brackets for fixing the equipments on wall
Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and socket
40 Metre Length
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Gun metal
Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required
2 Way - 100 mm dia MS Pipe
4 Way - 150 mm dia MS Pipe
Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
Pendent Sprinkler
Upright Sprinkler
Horizontal Side Wall Sprinkler
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
150mm dia
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
100 mm dia
150mm dia
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
Supplying, installation, testing & commissioning of water curtain nozzle 15mm dia nickle chrome plated brass ,BSPT ,k-factor as per design consideration complete as required
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.
Supplying, installation, testing & commissioning of adjustabble rosette plate for 15mm dia in white finish UL listed or FM approved complete as required
Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.
Chilled / Hot Water Piping With Nitrile Rubber Insulation
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.
Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
300 mm dia. (32 mm thick insulation)
250 mm dia. (32 mm thick insulation)
200 mm dia. (32 mm thick insulation)
150 mm dia. (32 mm thick insulation)
125 mm dia. (32 mm thick insulation)
100 mm dia. (32 mm thick insulation)
80 mm dia. (32 mm thick insulation)
65 mm dia. (32 mm thick insulation)
50 mm dia. (32 mm thick insulation)
40 mm dia. (32 mm thick insulation)
32 mm dia. (19 mm thick insulation)
25 mm dia. (19 mm thick insulation)
19 mm dia. (19 mm thick insulation)
Motorised Butterfly Valves
Supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & hot water line of each chiller & Hot Water Generator operated through BMS & of following sizes. Valves shall be insulated as per pipe insulation material & thickness given above.
200 mm dia (For Chiller)
100 mm dia (For Heat Pump) (For Other Areas)
Manual Balancing Valves
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia C6
50 mm dia
40 mm dia
Y-strainer
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage of approved make of dia 150 mm conforming to tender specifications.
Thermometer
Providing & fixing in position the mercury in glass industrial type thermometers.
Condenser Water Piping
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
Note:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
250 mm dia
200 mm dia
Motorised Butterfly Valves
Supplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20 mA electric signal and providing similar transduced feedback output to control system as required.
250 mm dia (For Condenser Out, Cooling Tower In & Out)
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
200 mm dia.
150 mm dia.
50 mm dia
Thermometer
Providing & fixing in position the mercury in glass industrial type thermometers.
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage of approved make of dia 150 mm conforming to tender specifications.
Acoustic Insulation of AC Plant Room
Supplying, fixing acoustic lining on wall and ceiling of AC Plant Room with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
SITC Pre-Insulated Fiberglass wool Duct Board-Plus –R for duct thermal insulation is having 25mm thickness with both side factory laminated aluminum foil, outer facing foil is having - Reinforced aluminum + Kraft+ glass veil and inner facing foil - Aluminum + Kraft + glass veil. Duct Board Size: 1.19mtr (W) X 2.9mtr (L)
Site Fabricated GSS Ducting
Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
24 G (Up To 750 mm)
22 G (751 to 1500 mm)
20 G (1501 to 2250 mm)
18 G (Above 2250 mm)
Duct Accoustic Lining
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
Duct Insulation
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.
19 mm thick
25 mm thick
Fire Dampers & Actuator
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
Fire Damper
Actuator
Grilles, Diffusers, VCD
Supply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per specifications given in tender and of following sizes.
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
GSS Duct Damper
Supply, installation and testing of multiblade box type Galvanized Sheet Steel construction damper for ducts to be provided with suitable links and quadrants for control of volume of air.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
S/ F MS Cable Trays
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 62.5 mm depth X 2 mm thickness
End Termination of Cables
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3½ x 300 sq. mm
3½ x 35 sq. mm
4 x 25 sq. mm
4 x 16 sq. mm
SCHEDULE ITEMS (TOTAL)
NON-SCHEDULE ITEMS
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.
Providing and laying light weight Foam Concrete of density 500 kg/cum in sunken portion at all levels as per direction of Engineer-In-Charge.
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing & Fixing 50 mm precast glass reinforced concrete jali as per the architectural design including fixing throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
Providing and fixing Clay tiles work for wall lining with special adhesive like Araldite or equivalent over 10mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade.
Treatment Of Construction Joint :-Providing and Installing hydro swelling bar in all construction joints in retaining wall of the underground basement structure. All construction joints , shall be installed with, 20mm x 10mm cross-sectional sized hydro-swelling water bar based on advance vinylacrylate polymers. The water bar shall be formulated to exhibit low pre-mature swelling (less then 50% with in 12 hours) and shall not be based on super absorbents. The water bar shall have low swelling pressure; not exceeding 0.25 MPa at full swelling capacity. The water bar shall be installed with special adhesive glue and not to be fixed using nails
Casement door Single panel with 3D hinges made of frame 65mm x 73mm (outer frame Casement door type) and Sash of 65mmx 105 mm (casement door type) wall thickness of profile must be min 1.8±0.3 mm and single glazing bead/double glazing bead of appropriate dimension and 6mm toughened glass, locking arrangement one side key, one side thumb turn (area of door upto 1.89 sqm)
Casement door Single panel with 3D hinges made of frame 65mm x 73mm (outer frame Casement door type) and Sash of 65mmx 105 mm (casement door type) wall thickness of profile must be min 1.8±0.3 mm and single glazing bead/double glazing bead of appropriate dimension and 6mm toughened glass, locking arrangement one side key, one side thumb turn (area of door above 1.89 sqm upto 2.1 sqm)
Casement door Single panel with MidRail and 3D hinges made of frame 65mm x 73mm (outer frame Casement door type) and Sash of 65mmx 105 mm (casement door type) wall thickness of profile must be min 1.8±0.3 mm and single glazing bead/double glazing bead of appropriate dimension and 6mm toughened glass, locking arrangement one side key, one side thumb turn (area of door upto 2.52 sqm
Casement door double panel with 3D hinges made of frame 65mm x 73mm (outer frame Casement door type) and Sash of 65mmx 105 mm (casement door type) wall thickness of profile must be min 1.8±0.3 mm and single glazing bead/double glazing bead of appropriate dimension and 6mm toughened glass, locking arrangement one side key, one side thumb turn (area of door upto 3.78 sqm)
1- Two track two panels sliding window made of 65mm x 50mm (outer Frame two track Slider type) and Sash of 45mmx60mm (Two track Slider type), wall thickness of profile must be min 1.8±0.3mm and single glazing bead of appropriate dimension with 6mm toughened glass (Area of window upto 1.23 sqm)
1- Casement single panel and one fix panel window made of 45mmx50mm and Sash of 78mmx 45mm, wall thickness of profile must be min 1.8±0.3mm and single glazing bead of appropriate dimension with 6mm toughened glass (Area of window upto 1.08 sqm)
1- Top hung ventilator with S.S. friction hinges 45mmx50mm (outer frame) and Sash of 78mmx 45mm, top is fixed panel for exhaust fan, wall thickness of profile must be min 1.8±0.3mm and single glazing bead of appropriate dimension (Area of ventilator up to 0.72 sqm)
Providing and fixing S.S. tower bolts ISI marked with necessary screws etc. complete :
Providing and fixing stainless steel Mini Pull Handil H-Type Handles with necessary screws etc. complete :
SIZE 155 X 12 mm (SS HANDLE)
Providing and fixing Stainless steel double rod door stopper of approved quality & make with necessary screws etc all complete.
Providing and fixing 100 mm Stain less steel mortice latch and lock with six levers and a pair S.S. lever handles with necessary screws etc. complete (Best make of approved quality).
Providing and fixing SS sliding door bolts of approved design & make of size 250 x 16mm with nuts and screws etc. complete.
P/F S/S Hydralic Door Closer Heavy Duty of approved design & make with accories all complet.
Providing and fixing fully automatic hermatically sealed sliding door with lead insert/linning with view panel of size 400x400 on each leaf and with all acessaries complete in all respects as per drawing,manufactures specification and direction of Engineer-in-charge.
Providing and fixing mirror of superior glass 6mm thick (of approved quality) and of required shape and size with wooden moulded frame of approved make and design with 6 mm thick hard board backing :
Providing and Fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 48x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes
Providing & Fixing 3 mr Automatic Boom Barrier with Wireless Remote Control as per manufacurere specifications and direction of engineer-in-charge.
Prviding and Laying 10 mm thick Heavy duty Paver Vitrified Tiles of size 300 x 300 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and jointsfilled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile Size 600x600 mm
Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining,skirting and dado (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately).
Supply and installation of PVC flooring of 1.83m wide, having a nominal total thickness of 2.2mm. The nominal thickness of the wear layer would be 2 mm. The product should have a conductive backing of 0.2mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors and pattern detail shall be dispersed throughout the thickness of the wear layer. It shall conform to Group P of Wear Resistance as per EN 649, Flammability of class Bfl-s1 as per EN 13501-1, Slip resistance of R9 as per BGR 181, Dynamic Coefficient of friction as DS as per EN 13893, Impact sound reduction of 3 dB as per EN ISO 140-8, Residual indentation of 0.05 mm as per EN 433, Color fastness rating ≥6 as per ISO 105-B02, Vertical resistance(R1) less than 106Ω as per EN 1081, Static electrical charge of ≤2.0kV as per EN 1815, Thermal resistance of 0.01m²K/W as per EN 12667, Thermal conductivity of 0.25 W/mK as per EN 12524. PASTELL conductive shall exhibit ESD properties as following - Vertical resistance less than 3.5x10^6Ω as per EN 61340-4-1, Static electrical charge - system test less than 100V as per EN 61340-4-5.The class of use of is 23/34/43 as per EN 685.
Installation: It is important to ensure the sub floor on which the sheet is being laid is smooth, flat & hard & free from moisture,grease, etc. In case of uneven sub floor the same should be leveled by self leveling compound. IPS/Vitrified/ceramic/mosaic tiles do not provide zero leveled sub floor.The moisture level present in the subfloor should be less than 8% before installation of the floor. The sheet should be laid using adhesive recommended by Armstrong. Each row of tiles/strip of floor covering must be linked crosswise with a continuous copper strip. Individual rows/strips must be at least 3 m² in size and linked to the rest of the area with a copper tape. In rooms of up to 40 m², connection points for equipotential bonding should be provided in at least one point in the room. In larger rooms, several connection points must be used. The installation shall be undertaken as per the manufacturer’s installation instructions (FOR OT AREA- Rs. 250/- per
Supply and installation of PVC Sheet wall covering manufactured by Armstrong World Industries, Inc, 1.5m wide, having a nominal total thickness of 1mm. The nominal thickness of the wear layer would be 1.25mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors shall be dispersed throughout the thickness of the wear layer. Wallflex shall conform to Group M of Wear Resistance as per EN 660-2, Fire resistance of group 2 as per AS/NZS3837, Residual indentation of ≤0.10mm as per EN433, curling after exposure to moisture ≤8mm as per EN434, Seam strength of mean≥240N/50mm as per EN684.
Supply and installation of Properly shaped radius section at floor to floor to act as a supporting base for coved sheel vinyl flooring
Supply and installation of homogeneous pvc sheet of 2 metre wide and overall thickness of 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHIELD technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Color and pattern details shall be dispersed throughout the thickness of the wear layer. Medintech Plus shall conform to group "T" wear resistance as per EN 649, Clean Room certified with class 'A' as per ASTMF5100, Flammability resistance of class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Residual indentation of 0.03mm as per GB/T 4085-2005, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 3.3 kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair. The product shall be FloorScore certified with no SVHC content published by European Chemicals Agency(REACH). Product shall contribute to LEED points under Indoor environmental quality(LEED EQ) and Material & Resource (LEED MR) category.
Flotex Carpet (Area- Conference , Auditorium) Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated aluminum angles as per detail. Aluminum angles to be paid separately. The work should be carried out by the authorized installer of the Company in India.
Providing & fixing of a 50x50cm modular carpet tile, 100% manufactured in Europe, made using 100% Polyamide (also called Nylon) yarns, minimum pile weight of 540 GSM, minimum total weight of 4300 GSM, minimum pile height of 2.9mm and minimum total height of 6.4mm and minimum tuft density of 156000/m² and Castor Chair suitability of Class A (continuous use) as per EN 985. The said modular carpet tile should have a minimum usage classification of Class 33 or better as per EN 1307, fire rating of Bfl-S1 or better as per EN13501-1, minimum color fastness rating to light to be >5-6 as per ISO 105-B02, and impact noise rating of >37dB as per ISO 10140. The said modular carpet tile should have anti static rating of ≤2kV as per ISO 6356 and dimensional stability of max 0.2%, as per EN986
Providing of 2 - 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer and installation team on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge
supply, deliver and installation of AURA ASIPL open cell ceiling 100mm open cell ceiling with cell size of 100x100mm made out GI steel. The assembled cell ceiling panels shall be in size of 600x1200 made out of blades in 9mm (W) x 40mm (H). The assembled cell ceiling panels are then clipped into U-‐94 carriers in GI, pre-‐coated in black enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-‐94 carriers. Once the U-‐94 carriers are installed then primary angles made out of GMS, type U1040 are cross connected to the U-‐94 carriers at 1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded rods installed 1200mm c.c. All panel modules must be hingeable through wire clips.
Providing & Fixing of Armstrong Orcal Clip in metal ceiling System consisting of 300x1200mm clip in tiles of pre coated Aluminium in 0.7 mm thickness with bevel edge in white colour with standard perforation of 1.5mm dia. The back of the tile should have black acoustical fleece. The NRC should be 0.70 and suitable for Green Building application, with Recycled content of 50%. Installation: To comprise 3000mm long ‘C’ channels spaced at 1200mm centres securely fixed to the structural soffit by support clamp & approved hangers. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm Dp-12 Main carriers (spring tee bars) shall be spaced at 1200mm centres in a direction perpendicular to the C-channels and shall be secured at every intersection with C channel using a dp-12 hanger. Use Dp-12 connector to splice two pieces of Dp-12 main carriers. Tiles should be clipped in between two Dp-12 carriers (spring tee bars) from below. Perimeter trims to be of Armstrong wall angles of white colour secured to walls at 450mm maximum centres. Cut tiles to be secured to the wall angles using a spring clamp
Providing and fixing wooden false ceiling at all height using 4 mm thick veneer finish lamination sheet over 12 mm thick BWR grade ply as per design and pattern of Architectural drawing including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 4mm thick vanner finish lamination and 12 mm thick BWR grade ply to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the ply with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for ply, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge
Design, Manufacture, Supply and Installation of dpi system, a complete assembly of extruded cellular structure UV protected polycarbonate panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of minimum 12 mm thickness with panel width of 600 mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam with standing seam height of 10 - 15mm at both sides of the panel. Panels shall be of Softlite / Antiglare type to prevent glare. Panels shall be fixed on purlins with the Z - Type Stainless Steel Fastener/retention clips and connectors. Each fastener shall be min 1 mm thick of SS 304 Grade and secured to supporting frame/structure with min 3 numbers self-drilling screws so that the Pull-Out Load of Fastener exceeds 7000 N (7 KN) when tested as per ISO 6892:1998 and IS 1608: 2005. Snap-on connectors to interlock the panels shall have 2-4 teeth grip-lock locking mechanism to ensure maximum uplift capability. Polycarbonate panels also shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per sASTM G 155. The polycarbonate panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panel shall be with additional End cap/Aluminum U / F Profile / Glazing Bar (mill finish) for ends as required. Panel shall be fixed over M S structural steel / MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings.
Roller Blinds : Supply and Installation of Black out Roller Blinds - (For Windows) Supply & Installation of manually operated roller blinds as per approved style and shade. Blinds to be overlapped. Technical Specifications:100% Opaque Composition:100% Polyster Thickness:0.6Mm Width(m):230Cms Mesh Weight(g/m):390Gsm Breaking Strength: Warp>=1300WEFT>=1200 Tear Strength: Warp>=20WEFT>=20 Color Fastness:ISO105B02,Grade B Anti Ultraviolet:100% Fire Classification:NFPA701-2004TM#1 Coating: Blackout 3 Pass foam coating EPI / PPI: 176/164
Providing and laying Ceramic Rectified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size 600 X 600 mm
Flotex Carpet (Area- Conference , Auditorium) Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated aluminum angles as per detail. Aluminum angles to be paid separately. The work should be carried out by the authorized installer of the Company in India.
Providing and laying rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
WATERPROOFING OF RAFT FROM POSITIVE SIDE:
Supplying and applying waterproofing of raft, footings etc. using Pre Applied, pressure sensitive HDPE membrane as per specifications listed below with guarantee period of 10 years:
Supplying and installing of 1.2 mm (including sand) average thick HDPE membrane with pressure sensitive adhesive, under high water table scenario, for Base RCC slab/ basement raft/ subway/ other underground civil structures conforming to BS 8102, IS 16471 Type I standard for below ground structures, having puncture resistance of 800 + 100 N (as per ASTM E 154) and hydrostatic head resistance 60+ 6 m head (ASTM D 5385), tensile strength of 21+ 3MPa (ASTM D 412), & elongation of >400% (ASTM D 412), peel adhesion to concrete of 880 + 100 N/m (As per ASTM D 903 modified). The membrane should be comprising of a min HDPE layer of 0.8 mm and a pressure sensitive adhesive layer which is covered by a weatherproof protective and trafficable granular layer of sand to protect self-adhesive polymer layer.
Surface preparation: Horizontal Surfaces - The substrate must be free of loose aggregate, slush, mud, sharp protrusions and stagnated water. Ground water level needs to be kept under the PCC level, continues dewatering to be done till completion of concreting. The surface does not need to be dry, but standing water must be removed. Vertical Surfaces - Use plum concrete/plywood for facing to sheet piling to provide support to the membrane.
Horizontal application: Place the membrane HDPE film side to the substrate with adhesive facing towards the concrete pour. End laps should be staggered to avoid a build-up of layers. Leave the membrane loosely laid, in position until overlap procedure is completed. Accurately position succeeding sheets to overlap the previous sheet 75 mm along the marked selvedge and edges shall be sealed. Ensure the underside of the succeeding sheet is clean, dry and free from contamination before attempting to overlap. At the end of each role, the grains should be removed by using hot air shovel gun & the joint between two sheets should be sealed with the help of Double sided tape Tape having 100mm width.
RETAINING WALL WATERPROOFING
Surface preparation: The substrate must be free of loose aggregate, slush, mud, sharp protrusions and stagnated water. Ground water level needs to be kept under the PCC level, continues dewatering to be done till completion of concreting. The surface of retaining wall should be dry (moisture content <5%) before application of primer.
Construction Joint treatment: All the construction joints in retaining wall should be opened in a V groove manner of size 10mm X 10mm using a grinder or suitable tool & should be sealed with Polymer Modified Mortar prepared SBR 45 @ 4 liter per 50 kg bag of cement & 150 kg sand.
Filling of tie rod holes: The tie rod holes shoukd be filled with Polymer modified mortar prepared using SBR 45 @ 4 liter per 50 kg bag of cement & 150 kg sand. Preparation of chamfer or vatta at wall & raft junction: The junction between RCC raft & retaining wall should be treated by preparation of vatta of size min. 50mm X 50mm with Polymer Modified Mortar prepared using SBR 45 @ 4 liter per 50 kg bag of cement & 150 kg sand.
Application of primer: Primer should be applied on treated, dry concrete surface at coverage of 4 to 6 sqm per liter using a brush or roller. Primer should be allowed to dry for minimum 2 hrs. The SBS membrane should be fixed within 24 hours after application of primer.
Fixing of SBS Membrane: Supplying and applying waterproofing of RCC Retaining wall using High performance, self adhesive membrane with cross laminated HDPE film as per specifications listed below with guarantee period of 10 years: Supplying and installing of 1.5 mm thick self adhesive membrane, under high water table scenario, for retaining walls of basement/subways or other underground structures conforming to BS 8102, IS 16471 Type I standard for below ground structures, having puncture resistance of min. 220 N (as per ASTM E 154) and hydrostatic head resistance not less than 70 m head (EN 12390, Part 8), tensile strength of 220 N/50mm (EN 12311 - part 1), & elongation of min. 325% (EN 12311 - 1), low temperature flexibility up to -15 degree C. The SBS membrane should be fixed on the primed concrete surface by removing the release film with maintaining overlap of 75 mm at the sides & 100 mm at the end sections.
Protection of membrane: The SBS Membrane should be protected by means of 6- 8 mm thick Drain board against any physical damage before commencement of backfilling.
Termination of Membrane on retaining wall: The SBS/HDPE membrane should be secured with a Metal strip on retaining wall (300 mm above the ground level) used in conjunction with polyurethane sealant SealArm PU of MYK Arment Make between the membrane and Metal Strip. The termination bar / Metal strip must be installed directly into the wall width and mechanically fixed at c/c using appropriate fasteners. A bead of Sealant is applied along the top edge of the termination bar.
Medical Services Work
BIOMEDICAL WASTE MANAGEMENT
High Pressure High Speed Horizontal Rectangular regulated medical waste management
(a) Carriage
(b) M.S. Trolley
Waste Shredder 50 kg/hr,
Waste collection Containers
Transportation Trolley complete with bin (SS 304)
Wast Collection bags
M.V Cubicle
Laying proper connections testing and commissioning of 1.1 kv PVC insulated aluminium conductor as per IS:1554 laid underground/cable tray/on surface of wall/hume pipe etc.
Supply, Installation, Testing and Commissioning of Double Door Steam Sterilizer with Vertical Automatic Door Opening of capacity 850 Litres/12 STU European CE Certified with 4 Digit Notified Body no. or USFDA-UL Listed (Imported) manufactured under quality management system ISO 9001:2015 and ISO 13485:2016; European CE certificate/UL listing certificate to be submittted - As per Technical Specifications of the Tender
Stainless Steel Inside Cart Platform compatible with Sterilizer
Stainless Steel Transport Trolley Compatible with Sterilizer
Supply, Installation, Testing and Commissioning of S.S. Control and packing table with drawer. Table is used for separation, control and packing of various sets of sterilized goods for wards, clinics, operation theatres etc. and is designed for standing and sitting workers, a removable hatch made of laminated particles board is provided. The hatch contains a SS drawer and a laminated particles board plate. Overall size: 2000 mm L x 1400mm W approx.
Supply, Installation, Testing and Commissioning of Stainless steel Work Table. Table is used for wet goods with undershelf. The table top is fabricated out of 16 SWG SS 304 grade. ground and polished to a smooth surface without high edge section. The table top frame is a complete assembly with front, back and two end welded together at corners. Overall size 1500 mm x 600 mm x 900 mm Ht. approx.
Supply, Installation, Testing and Commissioning of Stainless steel work table with two sink. The bench top is fabricated out of 16 SWG SS 304 qlty. ground and polished with smooth surface and edge section the top is designed to give a stable work surface. The table top frame is a complete assembly with front, back and two end welded together. The sinks are made of stainless steel with inside ground and polished. each sink is provided with a drain valve and a strainer. On the bench top, just above the sinks mixer forhot and cold water connection is provided. Overall size 2400 mm L x 650 mm W x 900 mm Ht
Supply, Installation, Testing and Commissioning of Washer Disinfector (Capacity of 275 ltrs.) Double Door Washer Disinfector, single door, suitable for cleaning and disaffection of surgical instruments, anesthetic equipment, suction bottles, cleaning buckets, general’s circulation goods, dental tray and glassware with a fully closed process. The chamber is equipped with four spray arms which ensure good water penetration from all directions. The wash chamber, the inside the door, the pipework system and the circulation arms are made entirely of stainless steel. Suitable for electrical operation on 400/440 volts, 3 phase AC supply, electrical load 13 KW.capacity of 275 liters.
Supply, Installation, Testing and Commissioning of Ultrasonic Cleaner Overall size 530 mm L x 330 mm x 350 mm H Internal Dimensions: 505 mm x 300 mm x 200 mm approx., output frequency 35khz. Capacity 30 Ltrs The ultrasonic cleaners are manufactured using solid state technology for the ultrasonic generator and PZT transducers for converting the electrical energy to mechanical vibrations in the cleaning liquid.
Supply, Installation, Testing and Commissioning of Drying Cabinet with single door Drying timer controlled drying cabinet with single door suitable for easy and quick drying of instruments, utensils, glass wares and anesthetic accessories such as corrugated hoses, breathing masks, respiration bags and surgical instruments trays etc.The system would have adjustable adjustment temperature range of 60-90 0C. The system would have drying time range of 0-90 minutes. Chamber volume 275 liters. Suitable for electrical operation on 230 volts, single phase, 15 amps. Electric load 3.6 KW.
Supply, Installation, Testing and Commissioning of Stainless steel racks with 5 shelves, all sides open and stainless steel bullet feet. overall size 1830x535x1830mmH.
Supply, Installation, Testing and Commissioning of Stainless steel table trolley with 2 shelves Stainless steel table trolley with 2 shelves is for use in the sterile goods store when batching sterile goods for delivery and also for short internal transport. The trolley is also suitable for use as a temporary storage or utility space at packing tables. The frame is mounted on 4 nos. heavy duty swiveling castors for easy movement in narrow passages. Overall size 1080 mm x 530 mm x 800 mm H approx.
Supply, Installation, Testing and Commissioning of Gauze cutting machine with SS table size 900 mm x 600 mm x 750 mm approx. Blade size : 200 mm (8 inches) Cutting capacity : 165 mm, Net weight : 16.0 kg, Power : 220-240 V/0.75 HP / Single Phase.
Supply, Installation, Testing and Commissioning of Spray Gun Rinser Spray gun rinser with attachments is used for cleaning syringe catheters, endoscopes cystoscopies and variety of other instruments and articles used in sterile services.
Supply, Installation, Testing and Commissioning of Heat Sealing Machine- Rotary Type with Automatic Motorized Packing Stand The sealer is suitable for small bags packaging and adopts electronic constant temperature control system and speed adjusting transmission mechanism. It can seal plastic films of various materials such as PE, PP, Aluminium foil. Can be fixed date embossing system and provided with newly type microcomputer control with counting device and Automatic Motorized Packing Table with Height Adjustment Stand for Packing and Sealing is made of Stainless Steel with automatic height adjustment range of 820 mm – 1320 mm. The Packing Stand should be fitted with shelves or hunch hooks for hanging baskets, lighting and power outlets. The Table should have programmable three different heights. Automatic Height adjustment should be provided by electric motors of 230 V – 50 Hz
Supply, Installation, Testing and Commissioning of Pass Box (600 mm x 600 mm x 600 mm) with UV Lamp- Static
Supply, Installation, Testing and Commissioning of Double Door H2O2 Plasma Sterilizer for Low Temperature Sterilization with Vertical Automatic Door Opening with TCV 130 Litres European CE Certified with 4 Digit Notified Body no. or USFDA-UL Listed manufactured under quality management system ISO 9001:2015 and ISO 13485:2016; European CE certificate/UL listing certificate to be submittted - As per Technical Specfications of the Tender
Kitchen Equipments
Supplying, Providing, Fixing, Testing, Commissioning of Kitchen Equipments which consists of following items (Suitable necessary Civil, Electrical works to be carried out and with necessary finishes in good manner by the agency without claiming extra charges the surface should be properly finished.)
a) RECEIVING AREA
SS Platform Rack- The entire rack is made of 18 on tiny tubular legs with adjustable bullet feet.Size 1300 x 600 x250
SS Big Bowl Sink Unit.Top of 16 sg. SS sheet on S.S. Angle frame work on S.S squarelegs with adjustable bullet feet for uneven floors. Size 1500 x 650 x850 +150 spl.
Weighing Scale.I.S.I. marked. The suppler has to provide the permit from Weights & Measures dept. (Digital Display) Capacity 300 Kg
COLD ROOM & DRY STORE
Dunnage Rack 1200 x 600
SS Platform Rack The entire rack is made of 18 on tiny tubular legs with adjustable bullet feet.Also fitted with cross bearing channel beneath to hold the Sacks.Size 1200 x 800 x250
Onion / Potato Bin The entire bin is made of 18 swg. S.S. Sheet on heavy duty castor wheels. Also fitted with top opening lids and doors beneath to extract onion / potato. size (1000 x 600 x1000)
4 Door Vertical Refrigerator. Double walled puff insulated all SS sheet body on tiny tubular legs with adjustable bullet feet.1000 Ltrs.
SS Storage Rack with SS Uprights.All five shelves are made of 18 swg. SS sheet on 4 nos round / square legs with adjustable bullet feet. Size 1200 x 450 x 1800
SS Storage Rack with SS Uprights 1350 x 450 x 1800
Platform Trolley. 800 x 500 x 900
4 Door Vertical Refrigerator. Double walled puff insulated all SS sheet body on tiny tubular legs with adjustable bullet feet. Capacity 1000 Ltrs.
VEG. PREPARATION AREA
SS Single Bowl Sink unit R.H.STop of 16 sg. SS sheet on S.S. Angle frame work on S.S tubular legs 1¼” side/dia. with adjustable bullet feet for uneven floors. Also fitted with a large sink on RHS.1460 x 650 x 850 + 150
SS Wall Shelf The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners.1460 x 300
SS Work Table with 1 No U/S.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. (810 x 650 x 850 + 150 spl.)
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 810 x 300
SS stand for Chopping blocks with boards.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 650x650x850
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. (1500 x 300 )
SS Wall Shelf The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. (1350 x 300 )
Veg Cutter Machine Continuous flow cutting machine is made of aluminum casting on tiny tubular legs with adjustable bullet feet(100 Kg/hr )
SS Work Table with 1 No U/S.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors. (1200 x 650 x 850 + 150 spl.)
SS Wall Shelf The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. (1200 x 300 )
SS Work Table with 1 No U/S.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. (1400 x 650 x 850 + 150)
SS Wall Shelf The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners.(1400 x 300 )
Garbage Cart (100L )
STAFF CANTEEN
SS Work Table with 1 No U/S.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. (1450 x 650 x 850 + 150 spl.)
Microwave Oven 15 L
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 1450 x 300
SS Single Bowl Sink unit (R.H.S)Top of 16 sg. SS sheet on S.S. Angle frame work on S.S tubular legs 1¼” side/dia. with adjustable bullet feet for uneven floors. 1500 x 650 x 850 + 150 spl.
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 1500 x 300
4 Door Vertical refrigerator. Double walled puff insulated all SS sheet body on tiny tubular legs with adjustable bullet feet. 1000 Ltrs.
Citrus Juicer. The juicer to have on line separator for citrus fruits.
Blender.The heavy duty hand held S.S. blender to have the capacity of blending & whipping of more than three litters at one time.
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 1750 x 300
SS Work Table with 1 No U/S. Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.1700 x 650 x 850 + 150 spl.
SS Wall Shelf.The entire shelf is made of 18 swg. S.S. Sheet and fastened on wall with S.S. fasteners. 1700 x 300
Sandwich Griller (Double).The heavy duty grilling plates are fitted on S.S. tops on tiny legs.
Tea/Coffee Dispenser Double walled mineral wool insulated all SS sheet body on tiny tubular legs. -150 cups/hr
Dosa Plate Top of 16 mm thick M.S plate on S.S Angle frame work on S.S. Square legs with adjustable bullet feet ( 1000 x 600 x 850)
SS Side Work Table with 1 No. U/s.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.(600 x 600 x 650 + 50 Spl.)
Idli Steamer.Doubled walled mineral wool insulated all SS sheet body on tiny tubular legs with adjustable bullet feet. (120 Idlis )
SS. Exhaust Hood with SS Filters (Wall type)Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. 1800 x 750 x600
Chopping Block S.S-304 sheet body to hold poly carbonate Chopping Boards650 x 650 x 850
Dough Kneader The heavy duty SS rotating drum is fitted with heavy duty MS stand & base, duty rust proof painted. 25 Kg
Chapati Plate Cum Puffer On ( Right -1No & Left -1 No) 1200 x 600 x 850
SS. Exhaust Hood with SS Filters Island type (1350 x 750 x 500)
Chapati Collection Trolley (750x600x850 )
SS Chapati Roling Table with Marble Top & U/s on Castors.Top of 16 mm thick M.S plate on S.S Angle frame work on S.S. square legs with adjustable bullet feet. Fitted with heavy duty R.V. Burner with pilot lamp with individual control valves. Also fitted with a puffer on right hand side and a bottom shelf. (1200 x 600 x 850)
Tilting Boiling Pans.Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. Fitted with grease collection tray and hung with metal fasteners. 80 Liters
Tilting Frying /Brazing PansDouble walled mineral wool insulated all S.S-304sheet body on heavy duty tubular legs with adjustable bullet feet. (80 Liters )
Single Burner Gas Range.(High Presure) Stock Pot.Top of 16 swg. SS Sheet on S.S Angle frame work on S. S. Square legs with adjustable bullet feet for uneven floors. (750 x 750 x 650)
SS Side Work Table with 1 No. U/s.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors. (750 x 750 x 650 + 50 Spl.)
4 Burner Gas Range with Oven Below.Top of 16 swg. SS Sheet on M.S Angle frame work on SS Square legs with adjustable bullet feet for uneven floors. (950 x 950 x 850 + 150 Spl.)
SS. Exhaust Hood with SS Filters (I-Land type).Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. Fitted with grease collection tray and hung with metal fasteners from ceiling.3500 x 2500 x 500
BISI Cooler Glass cover at the front door (600 Ltrs )
SS Bain Marie Counter with Sneeze Guard.Miner wool insulated top of all SS sheet body on tubular legs with adjustable bullet feet. (2200 x 675 x 850 + 450)
Garbage Cart Moulded Plastic container with 2 Nos-Big castor wheel. 100 L
WET AREA
Wet Masala Grinder (Tilting Type)The heavy duty SS rotating drum on SS covering on MS angle frame work duly rust proof painted, is fitted with heavy duty motor with a crushing stone duly fitted in drum with SS tubular leg. 10 Ltrs.
Onion / Potato Peeler.The heavy duty peeling drum is made of 18 swg. SS sheet on three nos tiny legs with adjustable bullet feet and a rotating disc of SS sheet being connected with heavy duty motor of 2 HP single/three phase. (Imported) 10 Kg.
Pulverizer.The continuous flow pulverizer is made of SS gravity hopper on SS covering on MS angle frame work duly rust proof painted on adjustable bullet feet. (8 to 10 Kg. )
MAIN COOKING AREA
Tilting Boiling Pans.Double walled mineral wool insulated all SS sheet body is fitted with heavy duty SS tubular legs. (80 Liters )
Tilting Frying /Brazing Pans.Double walled mineral wool insulated all S.S-304sheet body on heavy duty tubular legs with adjustable bullet feet. (80 Liters )
SS. Exhaust Hood with SS Filters.The entire hood is made of 18 swg. S.S. Sheet with S.S. baffle filter and being hung on wall with wall fasteners. (4720 x 1150 x 500)
Single Burner Gas Range.Top of 16 swg. SS Sheet on S.S Angle frame work on S. S. Square legs with adjustable bullet feet for uneven floors. (High Presure) 750 x 750 x 650
SS. Exhaust Hood with SS Filters.Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. Fitted with grease collection tray and hung with metal fasteners.(1600 x 950 x 500)
SS Side Work Table with 1 No. U/s.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. (750 x 750 x 650 + 50 Spl.)
Chapati Plate Cum Puffer on ( right –1 No & Left -1 No) Top of 16 mm thick M.S plate on S.S Angle frame work on S.S. square legs with adjustable bullet feet. 1200 x 600 x 850
SS. Exhaust Hood with SS Filters.Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. (2550 x 750 x 500)
SS Side Work Table with 1 No. U/s.Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. (825 x 950 x 850 +50 spl)
Chapati Collection Trolley.Sunken top of 18 swg S. S. sheet body on square legs on castor wheels. Also provided with a bottom shelf.(750x600x850 )
SS Chapati Roling Table with MarbleTop & U/s on Castors.Marble top rolling table is fitted on S.S. angle on S.S. square legs with adjustable bullet feet. Also fitted with a bottom shelf.(1200 x 600 x 850
Dough Kneader.The heavy duty SS rotating drum is fitted with heavy duty MS stand & base, duty rust proof painted. Also fitted with heavy duty SS arm to mix the dough and duly connected to heavy duty motor.25 Kg.
SS Single Bowl Sink unit (R.H.S) Top of 16 sg. SS sheet on S.S. Angle frame work on S.S square legs with adjustable bullet feet for uneven floors. 1150 x 650 x 850 + 150 spl.
SS Work Table with Drain Board.Marine edged top of 16 swg. SS sheet on S.S. sheet on MS Angle frame work duly rust proof painted on S.S tubuler legs 1¼” side/dia. with adjustable bullet feet for uneven floors.. Also fitted with a under shelf and a back plate. (1350 x 650 x 850 + 150 spl.)
Milk Boiler. Triple walled mineral wool insulated all S.S. Sheet body is fitted on tiny legs. Fitted with water inlet valve with the third Wall and an immersion type hearing element with auto temp. controller and indicating lamp to heat milk.80 Ltrs
Water Boiler.Double walled mineral wool insulated all S Sheet body on SS legs with adjustable bullet feet. Fitted with 3.0 kw immersion type heating element with auto temperature controller and indicating lamps. Also fitted with a top opening lid with insulated handle and two insulated handles on either side to carry 80 Ltrs
SS Side Work Table with 1 No. U/s (SS Side Work Table with 1 No.U/s.)Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. Also fitted with a back splash and under shelf. The top is fitted with stud wielded bolts with the frame for sturdy and stronger grip
4 Burner Gas Range with Oven Below (950 x 950 x850 + 150Spl.)Top of 16 swg. SS Sheet on M.S Angle frame work on SS Square legs with adjustable bullet feet for uneven floors. Fitted with United/Sarna make heavy duty burner with pilot lamps with individual control valves and heavy duty cast iron pan support. Also fitted with an electrically operated oven beneath.
SS. Exhaust Hood with SS Filters Entire exhaust is made of 20 swg.S.S-304 Sheet with S.S-304 baffle filters. Fitted with grease collection tray and hung with metal fasteners (I-Land type(4720 x 2000 x500)
Masala Trolley.The entire trolley is made on SS sheet body to keep inserts for preparation on tubular legs on 4 nos castor wheels-2 with breaks and 2 normal. Also fitted with a bottom shelf/cross brazings.(800 x 500 x 900)
SS Center Work Table with U/s on Castors. Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. Also fitted with a back splash and under shelf. The top is fitted with stud wielded bolts with the frame for sturdy and stronger grip(1200 x 600 x 850)
Garbage Cart.Moulded Plastic container with 2 Nos-Big castor wheel. Garbage cart should be set to keep vertically upright on its base complete with accessories as per specification.100 L
SERVICE AREA
SS Tray Cutlery Trolley.The entire is made of S.S. hinges on S.S. square uprights on castor wheels.(600 x 600 x 750)
SS Water Cooler.Double walled puff insulated all S.S. Sheet body on S.S. adjustable bullet feet. 50 Ltrs
SS Dirty Dish Landing Table with Garbage Chute (L.HS).1550 x 650 x850 + 150Spl.
SS Two Bowl Sink Unit Top of 16 swg. S.S. Sheet on S.S. angle frame work on S.S. square pipes with adjustable bullet feet. (1500 x 650 x 850 + 150 Spl.)
Hot Water Geyser (Horizontal) Top of 16 sg. SS sheet on S.S. Angle frame work on S.S tubular legs 1¼” side/dia. with adjustable bullet feet for uneven floors. Also fitted with two sinks on RHS. 100 Litres.
Pre-rinse Jet Spray. The spray unit to be fitted with hot & cold mixer
Dish Washer, 100 Racks/hr.
SS. Exhaust Hood with SS Filters (Wall type) 2250 x 950 x 500
Chain Conveyor 90 deg.(Manual) The heavy duty chain has to connect with the loading table and dish washer.850 x 850 x 910
SS Unloading Conveyor Table with Dishwash Rack holder. (manual) The entire table is made of 16 swg. S.S. Sheet on S.S. angle frame work on S.S. Square legs with adjustable bullet feet. Also fitted with S.S. Hinges to hold the dish washing rack beneath.1150 x 650 x 850 + 150 spl.
SS Work Table with Dishwash Rack holder.(1275 x 650 x 850 + 150 Spl.)
SS Dish Storage Rack. The heavy duty 4 tiers rack are made of S.S-304 square pipe (38mm & 25mm) and duly welded with 4 nos. uprights on nylon adjustable feet for uneven floor.(1350x850x900)
Cutlary Soaking unit (625 x 625 x750
POT WASH AREA
Hot Water Geyser (Horizontal) 100 Litres.
Pre-rinse Jet Spray.
SS Pot Rack.All the shelves are SS Square pipes on 4 nos square legs with adjustable bullet feet. All the joints are firmly welded and nicely grinded, polished and puffed to a smoother finish.(1300 x 600 x1500)
SS Two Sink Pot Wash.Top of 16 sg. SS sheet on S.S. Angle frame work on S.S tubular legs 1¼” side/dia. with adjustable bullet feet for uneven floors. Also fitted with two sinks on RHS. Also fitted with a back splash and cross brazing. The top is fitted with stud wielded bolts with the frame for sturdy and stronger grip. (1500x600x850+150)
Pot Wash Masonic (1500 x 1500 )
TRAY SET UP AREA
SS Tray Cutlery Trolley.The entire is made of S.S. hinges on S.S. square uprights on castor wheels. (375x500x850 )
Plate Dispenser. (800 x 400 x 850)
Tray Set up (ConveyerType)Top of 19 swg. S.S. Sheet on S.S. angle frame work on S.S. square pipes with adjustable bullet feet for uneven floors. Fitted with an electrically operated conveyor belt to shift the trays to load. 3900 x 600 x 850
Hot Bain Marie on Castors.Double walled mineral wool insulated all S.S. Sheet body is fitted with an immersion type heating element of 3.0 KW with auto temp. controller & indicating lamps on heavy duty castor wheels. Also fitted with 4 nos. G.N. pans with lids. (800 x 625 x 850)
SS Work Table with U/s. Top of 16 swg. SS sheet on MS Angle frame work on S.S tubular legs 1¼” side/dia with adjustable bullet feet for uneven floors.. Also fitted with a back splash and under shelf. The top is fitted with stud wielded bolts with the frame for sturdy and stronger grip(1500 x 650 x850 + 150 spl.)
SS Rack on Castors The heavy duty 4 tiers rack are made of S.S-304 square pipe (38mm & 25mm) and duly welded with 4 nos. uprights on Castors.(900 x 450 x 1800)
Food Warmer Trolley Double walled mineral wool insulated all SS sheet body on heavy duty castor wheels with push cart type handle. Fitted with 3.0 kw heating element with auto temp. controller and indicating lamps and SS hinges to keep pre-plated plates with insulated lockable door. Damage resistant rubber cushion is fitted on all the corners to prevent any damage during movement.(875 x 688 x 1200)
Sink (600x600x850 +150)
MISCELLANEOUS
Insecto Killer (Ceiling Mounted)
Air Curtain (Depend on Door Size)
Garbage Trolley
Extra Dishwash Racks
A Extra Dishwash Racks
B Dishwash Rack - Glasses /Cups
C Dishwash Rack - Tray
D Dishwash Rack - Cutlery
Extra Gastronorm Pans
1/1 GN Pan, 200mm deep with lid
1/2 GN Pan, 200 mm deep with lid.
1/2 GN Pan, 150 mm deep with lid
1/2 GN Pan, 150 mm deep with lid
Hand wash sink with Faucet
Nani Trape Drainage
lpg bank
Chapati Making Machine Semi Automatic (1000 Chapati )Should be semi automatic chapatti maker .Through put: At least 1000 chapatti/Hr
Peda Cutting Machine.S.S Sheet 16swg insulated body, mounted on 4 castors (2 with brakes) top to have cut out for 6 nos for keeping the food container. ,Three side covered with 20swg S.S sheet with S.S Pipe 16 swg push handle
Food Warmer Trolley
LAUNDRY EQUIPMENTS
Supply, Installation, Testing & Commissioning of Infection Barrier Washer Extractor. Not less than 30Kg Capacity. Steam Heated. C.E. Certified Machine. Basket Volume between 300-330 lts. G force between 340 Gs to 360 Gs High Spin. Soft Mount. Front Loading, Pass Through Design. Open Pocket. Fully Programable Touch Screen Microprocessor. Upto 99 Customized of Preset Programs. Top Suspension with Hydraulic Cushions. Full Stainless Stell Cabinet. S. S. Inner Cylinder, Outer Drum & Loading Door. Single Motor Variable Frequency Drive. 5 Compartment Soap / Chemical Dispenser.
Supply, Installation, Testing & Commissioning of Industrial Washer Extractor. Not less than 60Kg Capacity. Steam Heated. C.E. Certified Machine. Basket Volume to be between 600-630 lts. G force between 340 Gs - 360 Gs High Spin. Soft Mount. Front Loading, Open Pocket. Fully Programable Microprocessor. Upto 99 Customized of Preset Programs. Top Suspension with Hydraulic Cushions. Full Stainless Stell Cabinet. S. S. Inner Cylinder, Outer Drum & Loading Door. Single Motor Variable Frequency Drive. 5 Compartment Soap / Chemical Dispenser.
Supply, Installation, Testing & Commissioning of Industrial Washer Extractor. Not less than 30 Kg Capacity. Steam Heated. C.E. Certified Machine. Basket Volume to be between 300 - 330 Lts lts. G force between 340 Gs - 360 Gs High Spin. Soft Mount. Front Loading, Open Pocket. Fully Programable Microprocessor. Upto 99 Customized of Preset Programs. Top Suspension with Hydraulic Cushions. Full Stainless Stell Cabinet. S. S. Inner Cylinder, Outer Drum & Loading Door. Single Motor Variable Frequency Drive. 5 Compartment Soap / Chemical Dispenser.
Supply, Installation, Testing & Commissioning of Industrial Drying Tumbler. Not less than 60Kg Capacity. Steam Heated. C.E. Certified Machine. Basket Volume not less than 1200-12600lts. Front Loading, Open Pocket. S.S. Inner Cylinder. Reversible. Double Walled Outer Drum. Auto Digital Time & Temperature Control. Microprocessor Control for Drying & Cool Down Time with Humidity Sensor. Separate Motors For Drive & Suction Blower.
Supply, Install, testing and Commissioning of Flatwork Drying Ironer. Chest Heated. Front Feed, Rear Return, Pneumatically Operated Ironing Chest. Adjustable Ironing Pressure. Variable Frequency Inverter Drive. Conveyor Belt Feed. Perforated Roller with Centrifugal Moisture Suction. Galvanized Springs with Polyester Padding. Roller Size : Ǿ530 x 3000L. C.E. Certified Machine. Steam Heated.
Supply, Installation, Testing & Commissioning of Flat Bed Drying Press. Head Size : 1500 x 750. Steam Heated. Pneumatically Operated with Front Push Buttons. Auto Digital Timed Release. Bed with Centrifugal Moisture Suction. Adjustable Ironing Pressure. Teflon Lined Head. Large perforated bed with heat heat resistant Molleton / Silicon padding. Secured on to a large pneumatic cylinder with counter springs. Mounted on ball bearings. Automatic timed release of the head at preset time.
Supply, Installation, Testing & Commissioning of Vacuum Finishing Table. Table Top Size : 1200 x 750, Large Rectangular Table Top. Padded with Silicon Padding. Powerful Suction. Thermostatically Controlled. S.S. Table Heater, Extended exhaust duct with lighting device. Provision for swivelling type arm assembly for instant changeability for various bucks, along with Electric Steam Iron & Teflon Shoe,
Supply, Installation, Testing & Commissioning of Air Compressors. Fully Automatic. "Elgi Make" or Equivalent. 5 HP, Single Stage.
Supply of Dry linen Trolley. Size : 850 x 650 x 1680 (W x D x H)
Supply of Washroom Trolley. Size : 850 x 650 x 800 (W x D x H)
Supply of Shelf Linen Trolley, 100 Kg Capacity Size : 850 x 650 x 1680 (W x D x H)
Supply of Mobile Table. Dimensions: 1130 x 720 x 800. (W x D x H)
Laundry Scrub Station with 2 Sinks Dimensions: 1600 x 550 x 900 (W x D x H)
Supply, Installation, Testing & Commissioning of Steam Boiler. 600Kg Capacity. Non IBR HSD. 10.54 kg/cm2 . M.S. Ducting for Chimney, Compatible Water Softener (for water hardness less than 500ppm), Circulation Pump for softener, Header, Water Storage Tank of 2000 ltrs mounted on 3 mtrs high M.S. Structure, Diesel Service Tank of 990 ltrs, Interconnecting Water & Diesel Pipelines with Valves & Strainers within the Boiler Room duly installed & commissioned. Civil work are excluded. Souces of water, electricity, drain & diesel etc are to be provided by the customer within the Boiler Room.
Supply, Installation, Testing & Commissioning of Industrial Washing Machine. Not less than 30Kg Capacity. Steam Heated. Basket Volume to be between 300-330 lts. Low Spin Extract. Front Loading, Open Pocket. S.S. Front, Outer Drum, Inner Cylinder & Loading Door. Solenoid Operated Water & Steam Valves. Auto Timed & Digital Temperature Control. Non Clog Motorized Drain Valve. Automatic 3 Water Level Control.
Supply, Installation, Testing & Commissioning of Industrial Hydro Extractor. Not less than 30Kg Capacity, Direct Drive, Self Balancing. Basket Volume to be between 100-130 lts. Auto Timed. S.S. Outer Drum & Inner Cylinder. Automatic DC Injection Brake.
Medical Gases Pipeline System
Oxygen System
Liquid Oxygen supply system One vessel of 1X20 KL Liquid oxygen VIE vessel system will be the primary (main) supply source In case of failure in liquid oxygen supply, it should automatically switch over to an secondary source oxygen manifold having 2 X 20 cylinders. Design should be state-of-the-art. The unit should consist of a double walled vertical vessel (inner pressure vessel made of stainless steel and outer vessel of carbon steel).It should be fitted with standard accessories and should be “passed” the standard inspection requirement at factory for VIE.
20+20 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
Fully Automatic Digital Gas Control Panel for Oxygen The manifold control panel shall be type tested for electrical safety to BS EN 60601-1, EMC tested for emission to BS EN 55011 and for immunity to BS EN 60601-1-2, full certification shall be provided with each manifold control panel Pressure regulators and line pressure regulators must be compliant to EN ISO 10524-2:2005,2006 Fully automatic control panel must ensure complete seamless operation should be designed and certified for use with oxygen at 300 bar +10° to +60°C degree Celsius. The rated flow capacity of the automatic control panel (with one of the second stage regulator in operation) should 2500 LPM at 4.2 bar line distribution pressure to meet flow rate capacity. There shall be two separate stages of pressure regulation to enable high peak flow rates without a reduction in line pressure. The system shall be duplexed such that any single component failure will not affect the integrity of the medical gas supply. All regulators shall be protected against over pressurization by relief valves which shall be pre piped into the manifold exhaust line stub to enable gas to be vented out of manifold room.
A Digital touchscreen panel display’s pressure in each cylinder bank left and right, the outlet pressure shall be permanently shown. Each of the pressure reducers must have isolation vales to isolate any of the supply sources without affecting the operation of the system in any way. 2 sets of two nos. of single stage line pressure reducers as per ISO 10524-2:2005in 100% redundant configuration so that if one is in operation the other is in standby. It must be possible to isolate any of the line pressure reducers without affecting the operation of the automatic control panel. If a pressure parameter deviates significantly from the respective nominal pressure, an alarm should be activated immediately, to ensure that disturbances in the system are recognized. The fully automatic oxygen control panel must be CE marked class IIb medical device 93/42/EEC with four digit notified number specified. Technical Compliance Statement printed on letterhead to be duly signed by the manufacturer to be submitted for this item to be submitted with bid. Copy of bill of lading and certificate of country of origin duly stamped and signed by chamber of commerce to be submitted at the time of supply. Technical Compliance to be submitted, attested by manufacturer and notarized by public notary authority of Country of Origin of Manufacturer.
6 + 6 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per specifications.
Oxygen Flowmeter with Humidifier Bottle .
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
Nitrous Oxide System
4 + 4 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
Two Cylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .
Fully Automatic Digital Gas Control Panel for Nitrous Oxide The manifold control panel shall be type tested for electrical safety to BS EN 60601-1, EMC tested for emission to BS EN 55011 and for immunity to BS EN 60601-1-2, full certification shall be provided with each manifold control panel Pressure regulators and line pressure regulators must be compliant to EN ISO 10524-2:2005,2006 Fully automatic control panel must ensure complete seamless operation should be designed and certified for use with oxygen at 300 bar +10° to +60°C degree Celsius. The rated flow capacity of the automatic control panel (with one of the second stage regulator in operation) should 500 LPM at 4.2 bar line distribution pressure to meet flow rate capacity. There shall be two separate stages of pressure regulation to enable high peak flow rates without a reduction in line pressure. The system shall be duplexed such that any single component failure will not affect the integrity of the medical gas supply. All regulators shall be protected against over pressurization by relief valves which shall be pre piped into the manifold exhaust line stub to enable gas to be vented out of manifold room. The control panel will have heaters in-built.
A Digital touchscreen panel display’s pressure in each cylinder bank left and right, the outlet pressure shall be permanently shown. Each of the pressure reducers must have isolation vales to isolate any of the supply sources without affecting the operation of the system in any way. 2 sets of two nos. of single stage line pressure reducers as per ISO 10524-2:2005in 100% redundant configuration so that if one is in operation the other is in standby. It must be possible to isolate any of the line pressure reducers without affecting the operation of the automatic control panel. If a pressure parameter deviates significantly from the respective nominal pressure, an alarm should be activated immediately, to ensure that disturbances in the system are recognized. The fully automatic oxygen control panel must be CE marked class IIb medical device 93/42/EEC with four digit notified number specified. Technical Compliance Statement printed on letterhead to be duly signed by the manufacturer to be submitted for this item to be submitted with bid. Copy of bill of lading and certificate of country of origin duly stamped and signed by chamber of commerce to be submitted at the time of supply. Technical Compliance to be submitted, attested by manufacturer and notarized by public notary authority of Country of Origin of Manufacturer.
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
Compressed Air System
The unit should have Quadruplex stationary air cooled silenced (Reciprocating) Oil-Free Air Compressor with critical maintenance free technology each having 57.18 scfm capacity.
3-Stage Breathing Air Filters
Air Receiver Tank
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification
Vacuum System
Penta plex 7V Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity.The system to provide duplex/cascade vaccum system for automatically start and stop at 480mm and 650 mmHG
Vaccum Tank reservoir ( 3000 Ltrs Capacity)
Bacteria Filters
The terminal outlets for compressed air & vacuum, oxygen, nitrous oxide, Carbon dioxide shall comply with ISO 9170-1:2008 ISO 9170-2: 2008 The terminal outlets must be certified as per Medical Device Directives (93/42/EEC) having the CE mark along with the four-digit code from the certifying agency. The terminal outlets must be manufactured under BS ENISO13485-2003-2012 quality management system duly certified All the internal and external surfaces of the outlets should be appropriately treated and cleaned to ensure strict compliance to the standards. Each brass component shall have the unique batch number permanently stamped onto a visible position to enable full traceability to EN 9170-1:2008. The first fix assembly shall comprise a minimum 50mm diameter machined brass block to reduce heat transfer of which the unit includes an indexed pin for each different gas service to prevent interchange ability, the unit incorporates a maintenance valve/flutter disc, which will automatically shut off the gas supply if the second fix assembly is removed whilst the pipeline system is under pressure to enable servicing of the 2nd fix and valve without isolation of the gas supply.
The check valve assembly must comprise of a spring-loaded valve housed in a machined brass body. The check valve must permit the gas to flow when a probe is connected and seals off the gas flow when the probe is disconnected. The unit is installed between the first fix and the second fix, the second fix assembly must comprise of a gas specific body, which accepts, retains and releases the probe. It shall be supplied as a complete product with no assembly to be undertaken. The base of the body is indexed to match the first fix assembly. The front face of the second fix assembly incorporates a colour coded gas identity label that indicates the gas type in 2 positions at 180 degrees to each other to Easy installation and servicing: cartridge with sealing elements, replacement possible without blocking the station allow visual acknowledgment of the gas type. A stainless-steel anti-swivel pin shall be located at 12 o’clock to prevent flow meters from falling over while inserted into the 2nd fix. The unit will only accept the probe for the appropriate service. The second fix socket shall incorporate a sheer-plane to safeguard the first fix and pipeline in the event of accidental damage or bed jacking.
Gas specific components shall incorporate the Gas Identity marking, EN 9170 and the manufacturer identification mark permanently stamped or cast into the component surface. Probe roller pins shall be manufactured from stainless steel and positioned by the locking ring; these are tamper proof only serviceable using specialist tools. Probe roller pins held captive in cradle designs are not acceptable as this will cause dust settlement and malfunction the second fix check valve will comprise of the following components; 1 no. Brass Valve Body 1 no. Brass Valve Plunger 1 no. Spring 3 no. ‘O’ Rings 1 no. Probe Seal The check valve should be capable of withstanding an inlet pressure of 20 bar. The second fix assembly will comprise of the following components; 1. 1 no. Body (Gas Specific) 2. 1 no. Locking Ring 3. 1 no. Anti-swivel Pin 4. 1 no. Gas Identity
The body and locking ring will be die cast from zinc alloy and Teflon coated. It shall not be possible to insert a probe for a different gas into a body for any particular gas. Each body will also incorporate a gas specific coding hole to match the coding pin position in the first fix assembly. It shall not be possible to assemble a second fix assembly for any particular gas onto a first fix assembly for a different gas. The relevant gas symbol as defined by BS EN 9170-1:2008 will be moulded into the flange of the body e.g., Oxygen=O2 The terminal outlets should operate at the standard distribution pressure level corresponding to the standard line pressure of the medical gas pipeline system, which is around 4-5 bar for compressed gases and 0-400 mbar (absolute pressure) for vacuum. It must be possible to operate the outlets in one hand for the purpose of coupling (locking) and decoupling (unlocking). All the sub-assemblies of the terminal unit should be clearly marked with the type of service it is intended for use. Technical Compliance Statement printed on letterhead to be duly signed by the manufacturer to be submitted or bid will be rejected. The gas indexing of the various sub-assemblies should prevent any wrong assemblies being made by the installers or service technician.
Terminal outlets must comply to HTM02-01 BSEN 7396 shall, be CE marked as class IIb medical device 93/42/EEC with four digit notified number specified; Technical Compliance to be submitted, attested by manufacturer and notarized by public notary authority of Country of Origin of Manufacturer.
Oxygen
Nitrous Oxide
Vacuum
Ward Vacuum Unit with Regulator, Collection Jar of 600 ml with bracket .(For Wards)
Ward Vacuum Unit should with Digital and color coded display type regulator having large, easy to read gauge providing unmatched gauge accuracy + 1% of full scale color coded range with analogue mechanism. The unit should have 3-Mode High feature and equipped with push to set technology with collection Jar of 1200 ml with bracket (for Critical Areas) as per Technical Specification .
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
Combined Electrical Control Panel for Compressed Air System and Vaccum System .
Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP.,Kite Marked.
76 mm OD X 1.5 mm thk
54mm OD X 1.2mm thk
42mm OD X 1.2mm thk
28mm OD X 1 mm thk
22mm OD X 1 mm thk
15mm OD X 1 mm thk
12mm OD X 1 mm thk
Valves Boxes with Pressure Gauges
6 Gas Services(O2,Vac,N2O,Air4,Air7,AGSS)
4 Gas Services (O2, Vac, N2O, Air 4 )
3 Gas Services ( O2, Vac, Air 4)
2 Gas Services ( O2, Vac, Air 4)
Area Alarm
6 Gas services(O2,Vac,N2O,Air 4,Air 7,AGSS)
5 Gas Services (O2, Vac, N2O, Air 4, Air 7, )
4 Gas Services (O2, Vac, N2O, Air 4, )
3 Gas Services ( O2, Vac, Air 4)
2 Gas Services ( O2, Vac, Air 4)
Isolation Valves
MASTER ALARM
Bed Head Panels(for ICU)
Bed Head Panels (For Wards)
Supply, Installation, Testing and Commissioning of AGSS System consisting of Duplex 1050 lpm sufficient for operating 8 outlets, Skid Mounted, AGS Pumps with Remote Switches- AGSS Simplex Start Switch (As per HTM-02-01).AGSS System shall have twin standalone AGSS pumps 1050 LPM of 3 phase capacity each with built in flow indication and pressure regulation valve, mounted on single frame with control panel and separate warning label. One pump will be standby with the other in operation. Nominal Motor Power per Blower 1.1 KW and will be single stage. Starting Method will be DOL. 70 dB sound pressure level. 2” Pipe size and service connection 54mm OD pipe work. Anti vibrator mounts on all pumps Alarm and BMS outputs for remote status indication,24 volt control interface for controllers Pre-set vacuum relief valve and low pressure sensors Copper stubbed outlet and inlet pipe work for ease of connecting to MGPS.
The Package Consists: - Two oil less side channel blowers, one control panel with vacuum gauge and alarm indications. AGSS Pump completely dry, permanently lubricated, and sealed and air cooled operation. Control System: Provide automatic changeover from running to reserve with circuit breaker disconnects for each AGSS pump with external operators, full voltage motor starters with overload protection, control circuit transformers, visual reserve unit alarm, and isolated contacts for remote alarm Designed to safely remove exhaled anaesthetic agents from the operating environment and dispose of them to atmosphere, thus preventing contamination of the operating department and providing a safe and healthy workspace for the personal. The anaesthetic gas scavenging system must be certified as per Medical Device Directives (93/42/EEC) Annex II having the CE mark with notified number specified and classified as a class IIb device.
MODULAR OPERATION THEATRE (Major OT) 07 Nos
Wall Panel System using Powder Coated SS Rockwool Panels
SITC of Modular Wall Paneling inside OTs (50 mm Thick)- Modular SS Wall Panels with substructure frameworkThe substructure shall be covered with the wall cover panels made of Stainless steel (Material number DIN 1.4301, SS 304 grade) of thickness not less than 0.8 mm Category 2BPVC-304). Back Side of the Panel should be made of PPGI (Pre-Painted) sheet of thickness 0.8 mm The SS wall panels shall be reinforced with Fire retardant very low fume density factor of Rock Wool having minimum density of 96 Kg/m3 to make total thickness of wall panel to 50 mm. The Manufacturer of wall system should be registered with GRIHA (Green Rating for Integrated Habitat Assessment) under GRIHA V.2015 criterion: 11 and GRIHA V.3 criterion: 29 and a member of Green Building Council (IGBC).
MEASUREMENT METHOD: from the finished floor up to the height of the suspended false ceiling
Anti-Bacterial Ceiling Panel System
SITC of Modular Ceiling Paneling inside OTs - Modular SS Ceiling panels with substructureThe Ceiling panels shall be made of Stainless steel (Material number DIN 1.4301, SS 304 grade) of thickness not less than 1.0 mm. No other material shall be used for this purpose. The standard panel shall have modular grid size of 625mm x 1250mm or 625mm x 625mm. Coating of the Ceiling Panel shall be not less than 60 microns with 180°C stove enamelling and the colour RAL 9010, Off-white or powder coated. The ceiling panels shall be secured by means of clip system and punched-in-knobs shall keep the panels in place and shall ensure an exact ceiling level. The panels are open able for future repair / maintenance & up-gradation. The Manufacturer of wall system should be registered with GRIHA (Green Rating for Integrated Habitat Assessment) under GRIHA V.2015 criterion: 11 and GRIHA V.3 criterion: 29 and a member of Green Building Council (IGBC). Wall Panels to be certified to JIS Z 2801 / ISO 22196, BS EN 1363-1:2020, EN 1363-2:1999, EN 1364-1:2015, DIN 52210-2:1984-08, DIN 4102-1, Class A2.
LAMINAR AIR FLOW SYSTEM WITH MINI PLEAT FILTERS
Supply, Installation, Testing and commissioning of LAMINAR AIR FLOW SYSTEM of size ( 2400 x 2400 mm) . The laminar should be constructed with Aluminium sheet Laminar system will introduce the highest air quality into the operation theatre. Air should be diffused into the room uniformly over the total area through perforated alumnium grills. .The air diffusers should be installed in a manner which allows them to be removed for easy maintenance of air filter. HEPA filters of H14 Grade 99.97% efficiency are used to ensure high quality clean air is supplied and under tight control of bacteria infection system. Laminar System should be CE certified and in compliance under Class 1 Medical devices . (2400mmx2400mm)
DIMMABLE PERIPHERAL LED LIGHTS
Supply, Installation, Testing and commissioning of PERIPHERAL LIGHTS
* Recess mounted luminaire with screwless design for easy maintenance
* Digital ballast with dimmer control
* Non-yellowing clear acrylic diffuser is sealed with bottom frame and specially design sealant to ensure dust proof
* Pre-anodized high purity specular finish aluminium reflector for precise light distribution
AUTOMATIC HERMETIC SEALED SLIDING DOOR
SINGLE LEAF AUTOMATIC SLIDING DOOR IN HPL LAMINATE . Door Size - 1500 (W.) x 2100 (H.) mm WITH TOUCHLESS SENSOR , FOOT SWITCH.
*The Door leaf made of extruded aluminium profiles . The door leaf panel should be finished in HPL .The Door Panel should not have any vertical joints on both sides. **For smooth sliding the door moves on nylon wheels within an single piece aluminium extruded track. The Door leaf will have one view window of size 500 x 700mm . Door controller should be microprocessor based electronic automation unit (CE Marked) for controlling door movement, the acceleration and speed of the door. Features such as full opening, half opening,permanent opening .It includes photocell for user's safety .Door opening and closing should be through Touchless Hand Sensor & Foot Switch .In case of power failure door shoould be manually openable. Automatic Door should be CE certified and in compliance under Class 1 Medical device
SURGEON CONTROL PANEL
Supply, Installation, Testing and commissioning of 22" Touch Screen Control Panel with following features. Demo of future integration capability to be provided by Vendor on the Supplied Panels
*Lighting Control
*Temperature, Humidity and Pressure Display
*Window Blinds Controller
*Music System for Surgeon
*OR Camera Video Routing (To be optional for future integration)
*OR Camera Streaming (To be optional for future integration)
*OR Camera Recording (To be optional for future integration)
*OR Camera Display (To be optional for future integration)
TWO PLATE LED XRAY - DIMMABLE
Supply, Installation, Testing and Commissioning of Two Plate dimmable X-Ray viewing screen designed to provide a high level of control luminance without flicker. The dimming range should be from 3-100% . The Xray should have inbuilt sensor for Xray film . On/Off and dimming operation should be through integrated PCB. TWO PLATE XRAY should be CE certified and in compliance under Class 1 Medical devices
PRESSURE RELIEF DAMPER
Supply and Installation and Commissioning of proper Pressure Relief Dampers having multi 304 graded stainless steel blades for maintaining the positive pressure inside the operation theatre PRESSURE RELIEF DAMPER should be CE certified
CONDUCTIVE FLOORING WITH SELF LEVELLING
Supply and Installation and Commissioning of 2.00 mm thick CONDUCTIVE ESD tiles /roll as per EN 427.(Imported) The tiles/roll are manufactured from PVC chips coated with a conductive substance. The tiles/roll will offer guarantee a longlife conductivity independently from humidity and temperature. Tiles/roll should be highly compressed with a compact surface. These conductive tiles /roll should be completly free from volatile antistatic chemicals, and ensures a permanent and stable conductive performance of the floor over its entire life time. For cleanroom application tiles/roll should satisfy the strictest requirements for paricle release behaviour, helping to reduce any threat of contamination certified by Fraunhofer IPA Institute in Germany. The compact, pore-free surface should be unfreindly to bacteria and moulds to maintain highest standards of hygiene. The seams between the tiles/roll shall be hot welded using the same base material of tiles so that a true material cohesion between the tiles can be produced. The welding / seaming shall be done using hot air welding machine. The Electrical Resistance offered by the tiles is as per IEC 61340-4-1, EN 1081(100v) ANSI/ESD 7.1. The laying of Copper tape and conductive addhesive has to be laid before the tiles are laid. (Imported)
LIST BOARD
Supply and Installation ,Testing and commissioning of OPERATING WRITING LIST BOARD made out of Toughened Glass in 10mm thickness of size ( 948mm x 648mm )
List Board will be CE certified
HATCH BOX FOR DIRTY LINEN
Supply and Installation and Commissioning of HATCH BOX made out of Stainless Steel SS 304 grade for dispoasl of dirty linen /waste.Each Hatch will be equipped with two doors and the door will be operated electronically .The Hatch will be designed in such a way that only one door will be opened at one time.The UV light wiil be so installed that it is kept on while both the doors are closed ,this UV light has to be automatically turned off in case of opening of either of the doors. There shall be indicators on both sides of the OT so that door open/close status can be monitored from both ends.HATCH BOX should be CE certified and in compliance under Class 1 Medical devices
PENDANTS - ANESTHESIA (Indigenous)
Supply and Installation and Commissioning of 'SINGLE ARM PENDANTS for Anesthesia (CE Marked) : Single Arm Pendant will have 1000mm arms with Horizontal movement having load carrying capacity of 200kgs. The arm will be rotated upto 330degree to 340 degree . The Pendant will have frictional braking. Anesthesia Pendant will have 1 arm with shelves as per points :- 1) 5/15 Amp Electrical sockets without switches - 8 to 10 nos., 2) shelfs with side rails - 4 nos. with 1 drawer 3) Gas interface set for interface plate - 1 no., 4) Interface plate with electrical fittings- 1no. 5) Provision to fix 6 Nos Gas Outlets.
PENDANTS - SURGEON (Indigenous)
Supply and Installation and Commissioning of DOUBLE ARM PENDANTS for Surgeons ( CE Marked) : Double Arm Pendant will have (1000mm + 800mm) arms with Horizontal movement having load carrying capacity of 200kgs. The arm will be rotated upto 330degree to 340 degree . The Pendant will have frictional braking. Surgeon Pendant will have 2 arms with shelves as per points :- 1) 5/15 Amp Electrical sockets without switches - 8 to 10 nos., 2) shelfs with side rails - 4 nos. with 1 drawer 3) Gas interface set for interface plate - 1 no., 4) Interface plate with electrical fittings- 1no. 5) Provision to fix 6 Nos Gas Outlets.
OT LIGHT (Imported)
Supply and installation of OT light .160000 x 130000 LUX - - Light intensity Ec - 160 000 & 130 000 lux, - Light intensity adjustment - 5 – 100% - Color temperature Tc (with adjustment) - 3100 – 5000 K - Light field diameter d10 at Ec - 200 - 420 mm - Working range - 1 m - Color rendering index [Ra(1-8)] - > 95 ( > 95)* - Power supply - 86W
VIEW WINDOW
Supply, Installation, Testing and commissioning of VIEW WINDOW with 6mm toughened glass on both sides. Motorized Blinds of reputed make sandwiched in both glasses . The window will be recessed into wall. View Window size : 1800 x 1500 mm. View Window should be CE certified and in compliance under Class 1 Medical device
ELECTRICAL CONDUITING & WIRRING INSIDE OT
Supply, Installation, Testing and commissioning of ELECTRICAL CONDUITING AND WIRRING INSIDE OT . All wires should run within PVC conduits of 25mm size . Electrical distribution board complete with all accessories. Internal wiring with FRLS wires of reputed brands such as Bonton /finolex etc ,Wires will be of size 2.5Sqmm,4sq.and 6sqmm..Electrical Switchsockets of 6/16amp of approved make min 4 nos on each walls.
ALUMINUM DUCTING WITH INSULATION INSIDE OT
Supply, Installation, Testing and commissioning of 'ALUMINIUM DUCTING WITH NITRILE INSULATION . Aluminium Ducting with Nitrile Insulation inside OT i.e Supply & Return Air Ducts made out of Aluminium Sheet ducting 22 Swg.along with Nitrile insulation with 13mm thickness on supply ducts and 9mm on Return Ducts with required accessories and connections with plenum . Integrated Alumnium powder coated exhaust grills
SCRUB SINK
"The Scrub Sink should be made of 1.5mm thick Stainless Steel SS 304 grade . The scrub sink should be""provided with a front access panel which should be easily removed for access to the water controlled valve, waste connections, stoppers and strainers. Hands free operation should include infra-red sensors with built-in range of adjustment.""Thermostatic mixing, valve control should be located behind the access panel and maintain constant" "water temperature." "User defined time 1, 3,5,10 min. are available. This timing should be adjustable to meet individual"application requirements, provided with infrared sensors, thermostatic control taps with fail-safe temperature controls.""All units should have reduced anti splash front. It should have manual foot and operation mode. The station should also have inbuilt soap dispensers.
Nurse Communication System
Supply, Installation, Testing and Commissioning of Master Unit 40 Channels having capability of connecting with 40 Beds as per technical specifications of the Tender
Supply, Installation, Testing and Commissioning of Bed side unit having dimensions of 116 mm x 120 mm connected with IV/ME Unit with cable and Call Button having cord made of Soft Poly Vinyl Chloride resin with 6 PIN Connector as per technical specifications of the Tender
Supply, Installation, Testing and Commissioning of Code Blue Button as per Technical Specifications of the Tender
Supply, Installation, Testing and Commissioning of Monitor 15 Inch with Central Processing Unit along with Software for Viewing Data and Patient Layout
CURTAIN TRACK
Providing, fixing, testing and commissioning of Track System complete with curtains.
Providing, fixing, testing and commissioning IV Tree System 5 point hanger with 6’ track and all Accessories.(1 Set=2IV Track per bed)
Providing and placing . "Trent" , Main Table 1500 x 750mm, completely made up of Prelaminated particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards .The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table top is supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Side Storage unit of size 1050mm L x 450mm D x 750mm Ht is made of combination of hinged door unit and 3 Drawer unit - Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco.
Budd Chair 1. Leatherette Upholstered Seat & Back 2. Seat Size-530 mm W X470 mm D 3. Back Size – 530 mm W X460 mm HT 4. Base - Powder Coated fixed Base 5. Overall Chair Size - 618 mm W X 615 mm D X 815 mm H
Libro MB Back Height - Medium Back Back Finish - Mesh with adjustable lumbar support Back Frame - Black Color Seat Finish - Fabric - Black Seat Height Adjustment - Pneumatic Mechanism - Synchronized Tilt Back Tilt Lock - Upright Position Back Tilt Tension - Adjustable Armrests Type - 1D Height Adjustable Armpads Type - Metal Base Type - 5-Star in Nylone Base Warranty : 5 years from the date of invoice
. centre table in position with sizes 900 mm L x 500mm D x 400mm H with completely made of 25mm thick prelaminated particle. The Table have one pull out drawer and another shelf at lower level. 25mm thick particle board Top with edges sealed with PVC lipping. 25mm thick particle board Gable ends with edges sealed with PVC lipping. 18mm thick particle board Modesty panel with edges sealed with PVC lipping. 0-20mm adjustable levelers. 1 Drawer.
. Corner Table having dimension 500mm L x 500mm W x 400mm H with completely made of 25mm thick prelaminated particle board . Verticals also made of 25mm Particle board. All edges are sealed with 2 mm thick PVC Lipping. 25mm thick particle board Top with edges sealed with PVC lipping. 25mm thick particle board Gable ends with edges sealed with PVC lipping. 18mm thick particle board Modesty panel with edges sealed with PVC lipping. 0-20mm adjustable levelers.
Providing & Fixing of ."Ensemble " Confetrence table of Size 2400mm L x 1200mm W x 750mm Ht . the Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Legs are made of Aluminum Extrusion of 1.6mm thickness with aesthically designed elliptical Cover sections . Legs are designed to facilitate wire management . Cross Member are in CRCA steel and the Beam is made of MS and has size 75x50 mm of 1.5mm thickness in powder coated finish of 50 microns thickness and is connected with legs to allow for traversing of wires horizontally. The beam raceway provided with slots for fixing data and electrical switches and sockets for each user under the table. The above furniture should be as per specification and sample approved by client.
Providing and supplying .Model Quip Medium Back Chair .This is a Medium back chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client . The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair comes with 1-D adjustable armrests with PU Pads . Seat size is 490 mm W x 435 mm D and the Chair Height 975 mm - 1070 mm . Overall size of the chair is 630mm W x 550 mm D x (975 mm- 1070mm) H . The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 3 seater - 1850mm L x 740mm D x 750mm Ht
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 2 seater - 1300mm L x 740mm D x 750mm Ht
. centre table in position with sizes 900 mm L x 500mm D x 400mm H with completely made of 25mm thick prelaminated particle. The Table have one pull out drawer and another shelf at lower level. 25mm thick particle board Top with edges sealed with PVC lipping. 25mm thick particle board Gable ends with edges sealed with PVC lipping. 18mm thick particle board Modesty panel with edges sealed with PVC lipping. 0-20mm adjustable levelers. 1 Drawer.
. Corner Table having dimension 500mm L x 500mm W x 400mm H with completely made of 25mm thick prelaminated particle board . Verticals also made of 25mm Particle board. All edges are sealed with 2 mm thick PVC Lipping. 25mm thick particle board Top with edges sealed with PVC lipping. 25mm thick particle board Gable ends with edges sealed with PVC lipping. 18mm thick particle board Modesty panel with edges sealed with PVC lipping. 0-20mm adjustable levelers.
Providing & Fixing of . Table of Size 1200mm L x 600mm D . The Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness . Laminate pedestal unit having Dimension 400mm W x 450mm D x 621Ht and shall consist of One pencil tray, 2 drawers and one filing box. It is made of 18mm prelaminated particle board . It shall be provided with 2 lockable and two free twin wheeled castors. The pedestals shall have central locking mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be fitted inside the first drawer. It should freely slide in horizontal direction. The pencil tray shall have necessary compartments (Miniumum 3 compartments) for keeping stationary items. Pedestal is without handle and shall have side champhered edges for operating. The above furniture should be as per specification and sample approved by client.
Supply & Installation of Auditorium Chair : Supply and Fixing of Auditorium seating from TSI, HNI, Godrej make, Fabricate Auditorium seating with Auto Tip Up, Synchronized Push back by help of 16 ball and 4 rollers Automobile type robust sliding system, which is concealed in Box type Rolled C Channel Metal with 58 mm width and 2 mm thickness, Stand with two side Machined MDF Panel covered with fabric upholstery. Chair with PU padding with 3 Layer 100% Yarn Dyed fabric Upholsteries with injection-moulded seat and back Plastic covers. Equip each seat with a self-rising Torsion Spring compensating mechanism so that unoccupied seats return to an upright position perpendicular to the base line of floor of auditorium. Chair profile with the seat in the upright position and without a tablet arm, The Seat Size should be 45 cm x 45 cm & the Back size should be 45 cm x 66 cm with ergonomically designed seat and back cushions. Chair should be available in 21”, 22” and 23” to use multiple seat size in one layout for matching variable arch length.
Providing and Placing Cabin Table "STELLAR" of . . Main Table 2400mm L x 900mm D x 750mm Ht and Side Table 1200mm L x 600mm D x 750mm Ht are made of 30 mm thick Pre Laminated Particle Board with matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table supports are combination of Metal poles and Gable ends. Access Flap with Cable tray and switch mounting plate is provided on side table for wire management. Back storage unit is a Hinged Door unit . Back Unit is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are provided in storages. Main Table has a 3 drawer pedestal unit has castors and pedestal unit has size 400mm L x 450mm D x 680mm Ht made up of 18mm thk. Prelaminated Particle Board Caracass having central locking system . 2 Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slide . Book Case of size 900mm L x 400mm D x 1800mm Ht . Warranty 5 Years .
VERTA HB wITH Headrest Backrest Type: High Back (with Headrest) Backrest Frame: Black Headrest Type: Black Frame & Mesh Mesh Finish: Black Seat Finish: Boldface Fabric - Pitch Black (BF08) Mechanism: Weight Activated with seat depth adj. Lumber Support: Symmetrically Adj. Back Tilt Lock: Multi-point tilt lock Back Tilt Tension: Weight-Assisted Tilt Tension Seat Depth Adjustment: Standard (50mm) Armrests Type: 4-D (Height, Width, Depth, Pivot) Armpad Type: Black Polyurethane Base: Black Nylon (Standard) Arm Tube: Black Arm Rest: Black Additional Detail: V-Frame Back Support WARRANTY: 10 Years from the date of invoice
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 2 seater - 1300mm L x 740mm D x 750mm Ht
VERTA MB without headrest Backrest Type: Medium Back Backrest Frame: Black Headrest Type: Black Frame & Mesh Mesh Finish: Black Seat Finish: Boldface Fabric - Pitch Black (BF08) Mechanism: Weight Activated with seat depth adj. Lumber Support: Symmetrically Adj. Back Tilt Lock: Multi-point tilt lock Back Tilt Tension: Weight-Assisted Tilt Tension Seat Depth Adjustment: Standard (50mm) Armrests Type: 4-D (Height, Width, Depth, Pivot) Armpad Type: Black Polyurethane Base: Black Nylon (Standard) Arm Tube: Black Arm Rest: Black Additional Detail: V-Frame Back Support WARRANTY: 10 Years from the date of invoice
Providing and Placing Cabin Table "STELLAR" of . . Main Table 2100mm L x 900mm D x 750mm Ht and Side Table 1200mm L x 600mm D x 750mm Ht are made of 30 mm thick Pre Laminated Particle Board with matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table supports are combination of Metal poles and Gable ends. Access Flap with Cable tray and switch mounting plate is provided on side table for wire management. Back storage unit is a Hinged Door unit . Back Unit is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are provided in storages. Main Table has a 3 drawer pedestal unit has castors and pedestal unit has size 400mm L x 450mm D x 680mm Ht made up of 18mm thk. Prelaminated Particle Board Caracass having central locking system . 2 Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slide . Book Case of size 900mm L x 400mm D x 1800mm Ht . Warranty 5 Years .
Providing and supplying .Model Quip High Back Chair with head rest .This is a High back chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client..The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair has 1-D adjustable armrests with PU Pads . Seat size is 490 mm W x 435 mm D and the Chair Height 1135mm - 1225mm . Overall size of the chair is 640mm W x 665mm D x (985 mm- 1220mm) H .The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 3 seater - 1850mm L x 740mm D x 750mm Ht
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 1 seater - 800mm L x 740mm D x 750mm Ht
Providing and placing . "Trent" , Main Table 1800 x 750mm and Side Table 1050mm L x 450mm D x 750mm Ht are completely made up of Prelaminated particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards .The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table top is supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Back Storage unit of size 1800mm L x 450mm D x 750mm Ht is a hinged door unit - Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Main Table has a Laminate pedestal unit having Dimension 400mm W x 450mm D x 621Ht and shall consist of One pencil tray, 2 drawers and one filing box. It is made of 18mm prelaminated particle board . It shall be provided with 2 lockable and two free twin wheeled castors. The pedestals shall have central locking mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be fitted inside the first drawer. It should freely slide in horizontal direction. The pencil tray shall have necessary compartments (Miniumum 3 compartments) for keeping stationary items. Pedestal is without handle and shall have side champhered edges for operating. Warranty 5 years .
Providing & Supplying Liabrary Rack of size 900mm L x 310mm D x 1890mm Ht. The top Panel is Made of CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade with laminate on both sides of approved make and shade. The working and non – working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish as per the directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
Providing and Supplying Bed Side Table made of 18mm thick PLPB with PVC Edge Banding. Each Bed Side Table has a hinged door unit. The Table Dimension is 450 mm Ht x 400mm D x 400mm Width. Each Bed side Table has Levellers on Underside.
Providing and Supplying . Office Table having Dimension 1500mm L x 750mm W x 750mm Ht. Worktop is made of 25mmthick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping, Understructure is made of 18mm thick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping .Three no Drawer is built into the table. The Drawers have lock and each drawer is provided with Pull out Handle. 5 Year Warranty.
Prelaminated Particle Board storage with openable doors in standard modules, made up of 18mm thick prelaminated particle board with PVC edge banding with hinged door Hieght 1800mm. It should Have Hanging Rod . Lockable Foors with SS Fininsh Handles. 900mm L x 550mm D x 1800mm Ht
Providing & Supplying Steel Single Tower Locker Cabinets with in built Locks having dimension of 1800mm H x 460mm D x 390mmW made of 0.8 mm thick CRCA sheet duly powder coated to thickness of 40-60 micron.Each vertical unit has SIX Nos Locker unit. Each unit has independent door with concealed hinges and 7 lever cam lock and label holder the product has leveler for good ground support. All the components are finished 40 to 50 microns thick epoxy polyester powder coating oven baked at 180 to 200 deg.C. The above furniture should be as per specification and sample approved by client. Model LR 6
Providing and Supplying .Metal Waiting chair Model ES 909 having Seat made of Perforated Cold Rolled Steel Epoxy Powder coated having thickness of 1.2mm . Arms and Legs are made of Aluninium for superior Strength and durability. Seat Seat Frames are supported on Steel Beams with thickness of 2mm duly powder coated. Seat and Back are single piece duly Epoxy powder coated. 3 Seater Metal Perforated Steel Sofa - 1675mm L x 775mm Ht x 710mm W .
TRAINING CHAIR Back in Black Mesh. Black Powder Coated Frame. Fabric Upholstered Seat with PU Foam. Fixed Arms Foldable Writing Tablet Black Powder-coated 4-legged base Horizontally Stackable with Castors Warranty Terms: 3 Years from the date of invoice
Providing & Fixing of Cafe table of Size 1800mm x 1200mm. The Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client.
Providing & Fixing of Cafe table of Size 2100mm x 1200mm. The Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client.
Providing and Supplying Chair frame is made of MS tube chrome plated and has buffers. The seat is single piece Moulded PP in a choice of Red / Blue / Green / yellow / Orange and White colours as per directions of Engineer in Incharge. The above furniture should be as per specification and sample approved by client.
Supplying and Placing 50mm thick Panel Based system. Trims and Extrusions shall be made of aluminum. The numbers of these horizontal trims vary as per panel height. Blocks made out of a composite construction of MDF and paper honeycomb, Numbers of these blocks vary as per panel height. Connector are aluminum extrusion to construct configuration modules consists of junction like 2 Way 90deg,3 way 90deg, 2 way &3 Way universal post.
Providing & Fixing of . Modular Workstation of size 1200MM X 600MM with Desk Based System of Height 1050 mm. The Legs are made of 50mm x 50mm Sections of Steel duly powder coated. The Understructure has CRCA Steel Powder coated Raceway with seperate . Raceway is trapizium shaped ,110mm Height and 80-170mm Wide and runs along the entire Length of the Worktop. The slots for switches and Sockets are provided on Raceway cover as pe the use requirement. The raceway cover is also CRCA Steel Powder coated. Steel Powder coated Cross Beams are running under each Worktop. Cross Beam has Dimension 50mm Ht x 25mm W . The workstations have 18mm Fabric wrapped MDF Privacy Panel fixed on Elegent Metal Hardware to the worktop. The height of Privacy Panel is 300mm above worktop. All steel parts shall be pretreated for seven stage anti-corrosion treatment followed by epoxy powder coating. The thickness of the powder coating for all the steel and aluminium parts shall be minimum 45microns. The worktop shall be made of 25mm thick Prelaminated Particleboard. The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . All exposed/unexposed edges shall be finished with hot melt PVC edge banding of 2mm thickness on working edge and 0.8mm on non working edges. Each workstation shall be provided with a wire manager cutout of 65-70mm diameter .Worktops shall be provided with necessary prefixed M6 metallic inserts for fixing the brackets to the worktops for metal to metal coupling for complete modularity. Each workstation shall have a low height laminate pedestal unit as mentioned in separate BOQ item. Necessary hardware like slides, hinges & locks may be of Hettich or equivalent. Model League Plus Laminate pedestal unit having Dimension 400mm W x 450mm D x 600Ht and shall consist of One pencil tray, 2 drawers and one filing box. It is made of 18mm prelaminated particle board . It shall be provided with 2 lockable and two free twin wheeled castors. The pedestals shall have central locking mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be fitted inside the first drawer. It should freely slide in horizontal direction. The pencil tray shall have necessary compartments (Miniumum 3 compartments) for keeping stationary items. Pedestal is without handle and shall have side champhered edges for operating. The above furniture should be as per specification and sample approved by client . Warranty 5 years.
Providing and Placing Cabin Table "STELLAR" of . . Main Table 2100mm L x 900mm D x 750mm Ht and Side Table 1200mm L x 600mm D x 750mm Ht are made of 30 mm thick Pre Laminated Particle Board with matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table supports are combination of Metal poles and Gable ends. Access Flap with Cable tray and switch mounting plate is provided on side table for wire management. Back storage unit is a Hinged Door unit . Back Unit is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are provided in storages. Main Table has a 3 drawer pedestal unit has castors and pedestal unit has size 400mm L x 450mm D x 680mm Ht made up of 18mm thk. Prelaminated Particle Board Caracass having central locking system . 2 Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slide . Book Case of size 900mm L x 400mm D x 1800mm Ht . Warranty 5 Years .
Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 1200 mm (H) x 450 mm (D) and shall be made of prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel.. Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with Epoxy polyester powder coating finish 50 +/-10 microns 2)Facia : The cabinet shutters are made of Metal 3)Handles : Handle Shall be aesthetically designed D handles in SS finish. 4) Locking Mechanism: Locking Mechanism shall be Cam lock in Metal Door. 5)Levellor: It also have adjustable Leveler with plastic base with height adjustment up to 15mm. The above furniture should be as per specification and sample approved by client.
Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 1200 mm (H) x 450 mm (D) and shall be made of prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel.. Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with Epoxy polyester powder coating finish 50 +/-10 microns 2)Facia : The cabinet shutters are made of Metal borders with Toughned Glass fixed inside them. 3)Handles : Handle Shall be aesthetically designed D handles in SS finish. 4) Locking Mechanism: Locking Mechanism shall be Cam lock in Metal Door. 5)Levellor: It also have adjustable Leveler with plastic base with height adjustment up to 15mm. The above furniture should be as per specification and sample approved by client.
Providing & Supplying Liabrary Rack of size 900mm L x 594mm D x 1890mm Ht. The top Panel is Made of CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade with laminate on both sides of approved make and shade. The working and non – working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish as per the directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
Providing & Supplying Liabrary Rack of size 900mm L x 310mm D x 1890mm Ht. The top Panel is Made of CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade with laminate on both sides of approved make and shade. The working and non – working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish as per the directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
Providing and placing . "Connect" Curvilinear Workstation 1500 X 1500 X 1200HT with pedestal unit.Frame is 50 mm thick and made of vertical Aluminium Extrusions of 1.9 mm to 2mm thickness. Horizontal Member of frame are CRCA 0.8mm Thick. The System is complete hollow system with space for wire reticulation . All the frames will be duly powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10 leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel & powder coated.The electrical raceway can be provided below worktop or above worktop.The partition has integrated raceway provided one at skirting level thereby making 2 Raceways. Corner and End Post are made of 1.6mm Thick Aluminium Extrusion , Vertical Trims are made of 1.3mm Thick Aluminium and Horizontal Trims are made of 1.1mm thick Aluminium and are duly powder coated. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made out of 5mm - 6 mm thick Pre-laminated Medium Density Fiber Board (MDF). Bottom Row of Steel Tile: Constructed out of 0.7mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes. Magnetic tile: Constructed out of 0.7mm Galvanized sheet and covered with fabric of choice. Pin up tile is made of 4.5mm Bubble Guard Sheet + Fabric wrapped. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm.Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have Metal Insets for fixing screws. Powder coated M.S. brackets having 2mm thickness fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front side. Gable Ends are fixed with 2mm thick MS brackets to Frame and with 2mm thick Brackets to Worktops. Sealed edge in table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non working side. Each Workstation has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit . WARRANTY: 10 Years from the date of invoice
Supplying and placing of Recliner having qverall dimensions 830 x 740 x 1000mm. Made of PU having leatherite Upholstery, frame shall be made of Rubber Wood. Seat foam shall be of 24 Density foam + Pocket Spring (49 Nos. of Dia 50 mm / seat) Spring Rod Dia =1.6 mm+ 24 density foam. Back Foam shall be of 24 Density foam + Polyester fabric (recron).
Overall Dimensions of Mobile Drive Unit 2 Bay (U/C+Fittings+Drive +Cover) shall be 1830mm(W)x915mm(D)/400 - 450mm(D)x2150mm(H) .Providing & Supplying Compactor of approximately 2150mm height (Ht).The overall height of the standard module is 2150 mm from the bottom of the under carriage to the top of the module. These modules are fabricated in the factory with knock down construction covered from all the sides. The sheet used is CRCA conforming to IS:513 Grade D with thickness 0.8-1mm for the vertical back, side walls, top cover and horizontal shelves of bodies. Bodies are fixed/movable are bolted to undercarriage made up of 2-3mm thk HR Steel sheet which rolls onto channels/rail of 1.2-2mm thk HR steel & 25mm square bright bar which are embedded to the levelled ground. The Body has 3 Shelves. The sides/shelves shall be made from steel sheets conforming to relevant codes. The construction of the units shall be such that protection against dust by suitable overlapping of sheets and adequate pressing of joint. The allowable dimensional tolerance for the overall size of the body is 2mm. The bodies should be complete knock down type and UDL each shelf should be 40kg . No welding/metal working is allowed on site, Bodies are fixed/movable are bolted to undercarriage is allowed on site.
Providing and placing Meeting Room table in "U" Shape . Table Tops – Available in standard modules 1500mm L x 600mm D / 1350mm L x 600mm D / 1200mm L x 600mm D / 1050mm L x 600mm D / 900mm L x 600mm D /750mm L x 600mm D , made of 25mm thick Prelaminated Partlice Board. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Understructure – Legs made of 18mm thick Prelaminated Particle Board panels interconnected with 18mm thick pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management – Concealed wire management to take care of basic wiring requirements both horizontally & vertically. Cable Tray is mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management is through flexible vertical wire manager at one place . Slots for Mounting Data and Electric Switches and Sockets are provided on Cover Section of Cable Tray. Standard table top height – 750mm. Designed for Flexibility through modular Construction, Provision for easy wire management, Upgradeable / reconfigurable for future needs. Corners are Provided in 25mm thickness . Corners are supported on 63.5mm Painted Metal Pole with Leveller for Height Adjustment.
Providing and placing Meeting Room table . Table Tops – Available in standard module of size 750mm L x 600mm D , made of 25mm thick Prelaminated Partlice Board. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Understructure – Legs made of 18mm thick Prelaminated Particle Board panels interconnected with 18mm thick pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management – Concealed wire management to take care of basic wiring requirements both horizontally & vertically. Cable Tray is mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management is through flexible vertical wire manager at one place . Slots for Mounting Data and Electric Switches and Sockets are provided on Cover Section of Cable Tray. Standard table top height – 750mm. Designed for Flexibility through modular Construction, Provision for easy wire management, Upgradeable / reconfigurable for future needs.
Nero with Black Back frame • Medium Back with Black Mesh • Height Adjustable PP Lumbar Support • Fabric Upholstered Seat with moulded PU Foam • Seat Height Adjustable with Gas Lift • 1D PP Arms • Black PP 5-Star Base • Warranty – 3 Years
Providing and placing . "Connect" Linear Workstation -1200mm L x 600mm D x 1200mm Ht with pedestal unit, Frame is 50 mm thick and made of vertical Aluminium Extrusions of 1.9 mm to 2mm thickness. Horizontal Member of frame are CRCA 0.8mm Thick. The System is complete hollow system with space for wire reticulation . All the frames will be duly powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10 leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel & powder coated.The electrical raceway can be provided below worktop or above worktop.The partition has integrated raceway provided one at skirting level thereby making 2 Raceways. Corner and End Post are made of 1.6mm Thick Aluminium Extrusion , Vertical Trims are made of 1.3mm Thick Aluminium and Horizontal Trims are made of 1.1mm thick Aluminium and are duly powder coated. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made out of 5mm - 6 mm thick Pre-laminated Medium Density Fiber Board (MDF). Bottom Row of Steel Tile: Constructed out of 0.7mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes. Magnetic tile: Constructed out of 0.7mm Galvanized sheet and covered with fabric of choice. Pin up tile is made of 4.5mm Bubble Guard Sheet + Fabric wrapped. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm.Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have Metal Insets for fixing screws. Powder coated M.S. brackets having 2mm thickness fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front side. Gable Ends are fixed with 2mm thick MS brackets to Frame and with 2mm thick Brackets to Worktops. Sealed edge in table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non working side. Each Workstation has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit . WARRANTY: 10 Years from the date of invoice
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 2 seater - 1300mm L x 740mm D x 750mm Ht
Providing and placing .Trent Prelaminated Particle Board storage with openable doors of 1200mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade.The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. Storage has adjustable shelves inside and cam lock, tower bolt and locking strips.The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth AND 900MM W .
Providing and Supplying . Office Table having Dimension 1500mm L x 750mm W x 750mm Ht. Worktop is made of 25mmthick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping, Understructure is made of 18mm thick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping .Three no Drawer is built into the table. The Drawers have lock and each drawer is provided with Pull out Handle. 5 Year Warranty.
Libro MB Back Height - Medium Back Back Finish - Mesh with adjustable lumbar support Back Frame - Black Color Seat Finish - Fabric - Black Seat Height Adjustment - Pneumatic Mechanism - Synchronized Tilt Back Tilt Lock - Upright Position Back Tilt Tension - Adjustable Armrests Type - 1D Height Adjustable Armpads Type - Metal Base Type - 5-Star in Nylone Base Warranty : 5 years from the date of invoice
Providing and placing . "Trent" , Main Table 1650 x 750mm, completely made up of Prelaminated particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards .The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table top is supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Side Storage unit of size 1050mm L x 450mm D x 750mm Ht is made of combination of hinged door unit and 3 Drawer unit - Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco.
Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 1200 mm (H) x 450 mm (D) and shall be made of prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel.. Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with Epoxy polyester powder coating finish 50 +/-10 microns 2)Facia : The cabinet shutters are made of Metal borders with Toughned Glass fixed inside them. 3)Handles : Handle Shall be aesthetically designed D handles in SS finish. 4) Locking Mechanism:WITH Locking Mechanism shall be Cam lock in Metal Door. 5)Levellor: It also have adjustable Leveler with plastic base with height adjustment up to 15mm. The above furniture should be as per specification and sample approved by client.
Providing & Fixing of . Modular Workstation of size 900MM X 600MM with Desk Based System of Height 1050 mm. The Legs are made of 50mm x 50mm Sections of Steel duly powder coated. The Understructure has CRCA Steel Powder coated Raceway with seperate . Raceway is trapizium shaped ,110mm Height and 80-170mm Wide and runs along the entire Length of the Worktop. The slots for switches and Sockets are provided on Raceway cover as pe the use requirement. The raceway cover is also CRCA Steel Powder coated. Steel Powder coated Cross Beams are running under each Worktop. Cross Beam has Dimension 50mm Ht x 25mm W . The workstations have 18mm Fabric wrapped MDF Privacy Panel fixed on Elegent Metal Hardware to the worktop. The height of Privacy Panel is 300mm above worktop. All steel parts shall be pretreated for seven stage anti-corrosion treatment followed by epoxy powder coating. The thickness of the powder coating for all the steel and aluminium parts shall be minimum 45microns. The worktop shall be made of 25mm thick Prelaminated Particleboard. The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . All exposed/unexposed edges shall be finished with hot melt PVC edge banding of 2mm thickness on working edge and 0.8mm on non working edges. Each workstation shall be provided with a wire manager cutout of 65-70mm diameter .Worktops shall be provided with necessary prefixed M6 metallic inserts for fixing the brackets to the worktops for metal to metal coupling for complete modularity. Each workstation shall have a low height laminate pedestal unit as mentioned in separate BOQ item. Necessary hardware like slides, hinges & locks may be of Hettich or equivalent. Model League Plus Laminate pedestal unit having Dimension 400mm W x 450mm D x 621Ht and shall consist of One pencil tray, 2 drawers and one filing box. It is made of 18mm prelaminated particle board . It shall be provided with 2 lockable and two free twin wheeled castors. The pedestals shall have central locking mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be fitted inside the first drawer. It should freely slide in horizontal direction. The pencil tray shall have necessary compartments (Miniumum 3 compartments) for keeping stationary items. Pedestal is without handle and shall have side champhered edges for operating. The above furniture should be as per specification and sample approved by client . Warranty 5 years.
Nero with Black Back frame • Medium Back with Black Mesh • Height Adjustable PP Lumbar Support • Fabric Upholstered Seat with moulded PU Foam • Seat Height Adjustable with Gas Lift • 1D PP Arms • Black PP 5-Star Base • Warranty – 3 Years
Providing and placing Meeting Room table in "U" Shape . Table Tops – Available in standard modules 1500mm L x 600mm D / 1350mm L x 600mm D / 1200mm L x 600mm D / 1050mm L x 600mm D / 900mm L x 600mm D /750mm L x 600mm D , made of 25mm thick Prelaminated Partlice Board. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Understructure – Legs made of 18mm thick Prelaminated Particle Board panels interconnected with 18mm thick pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management – Concealed wire management to take care of basic wiring requirements both horizontally & vertically. Cable Tray is mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management is through flexible vertical wire manager at one place . Slots for Mounting Data and Electric Switches and Sockets are provided on Cover Section of Cable Tray. Standard table top height – 750mm. Designed for Flexibility through modular Construction, Provision for easy wire management, Upgradeable / reconfigurable for future needs. Corners are Provided in 25mm thickness . Corners are supported on 63.5mm Painted Metal Pole with Leveller for Height Adjustment.
Providing & Fixing of ."Ensemble " Confetrence table of Size 2400mm L x 1200mm W x 750mm Ht . the Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling .Legs are made of Aluminum Extrusion of 1.6mm thickness with aesthically designed elliptical Cover sections . Legs are designed to facilitate wire management . Cross Member are in CRCA steel and the Beam is made of MS and has size 75x50 mm of 1.5mm thickness in powder coated finish of 50 microns thickness and is connected with legs to allow for traversing of wires horizontally. The beam raceway provided with slots for fixing data and electrical switches and sockets for each user under the table. The above furniture should be as per specification and sample approved by client.
Providing and Placing Cabin Table "STELLAR" of . . Main Table 2100mm L x 900mm D x 750mm Ht and Side Table 1200mm L x 600mm D x 750mm Ht are made of 30 mm thick Pre Laminated Particle Board with matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish. The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table supports are combination of Metal poles and Gable ends. Access Flap with Cable tray and switch mounting plate is provided on side table for wire management. Back storage unit is a Hinged Door unit . Back Unit is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are provided in storages. Main Table has a 3 drawer pedestal unit has castors and pedestal unit has size 400mm L x 450mm D x 680mm Ht made up of 18mm thk. Prelaminated Particle Board Caracass having central locking system . 2 Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slide . Book Case of size 900mm L x 400mm D x 1800mm Ht . Warranty 5 Years .
Providing and Supplying . Model Alfa Table having Dimension 750mm L x 600mm W x 750mm Ht. Understructure is made of Powder coated CRCA Leg with 25 mm thick PLPB with 2mm PVC Lipping. The The rectengular worksurface shall be made of prelaminated particle board of 25mm thickness of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping. All the worktops should have metal inserts on the underside of worktops for coupling with metal screws for complete modularity. The understructure has metal CRCA legs of 702(ht)mm duly powder coated to 40-60 micron thickness. C-Legs is made up of Foot & vertical member. Foot is bended in triangular shape in 2mm CRCA sheet and vertical structure (1mm thick CRCA x213mmx676mmx30mm) is bended in single sheet. The legs have ABS plastic end caps and levellers. Modesty Panel is 18mm Thick Modesty Panel 300mm in Height.
Providing & Supplying Liabrary Rack of size 900mm L x 594mm D x 1890mm Ht. The top Panel is Made of CRCA Sheet and side panel is made up of 18mm thick pre laminated particle board of interior grade with laminate on both sides of approved make and shade. The working and non – working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at high temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets holding the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish as per the directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.
Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 1660 mm (H) x 450 mm (D) and shall be made of prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel.. Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with Epoxy polyester powder coating finish 50 +/-10 microns 2)Facia : The cabinet shutters are made of Metal 3)Handles : Handle Shall be aesthetically designed D handles in SS finish. 4) Locking Mechanism: Locking Mechanism shall be Cam lock in Metal Door. 5)Levellor: It also have adjustable Leveler with plastic base with height adjustment up to 15mm. The above furniture should be as per specification and sample approved by client.
Food Cum Shopping Complex
Providing & Placing Bed of size 2000 mm x 900mm The top of the bed is 18 mm thick ISI marked Pre-laminated Board, grade conforming to IS:12406 fixed on 19mm x19mm cross stiffeners frame. The 3 sides of the bed to be in 50x25mm MS Tubes and cladded with 18 mm thick Pre-laminated board , conforming to IS:12406 . The head & Foot rest to be as per drawing in 18mm Pre-laminated board conforming to IS:12406 to achieve shape and design. The bed has four legs made out of 50x25x1.6mm thk MS tubes. All Metal Parts is Duly Powder Coated with 45 microns.(Without Matress)
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
Main Storage Unit Cam Lock with Two Shutter & One Drawer Size - 600W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
Main Storage Unit Cam Lock with One Shutter (RH) Size - 300W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
Addon Storage Unit with Leg Space Size - 750W x 750D x 900 H Having 50X50mm Twin Beams Below Top.
Addon Storage Unit with Leg Space Size - 600W x 750D x 900 H Having 50X50mm Twin Beams Below Top.
Addon Storage Unit Cam Lock with Two Shutter & One Drawer Size - 600W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
Addon Storage Sink Unit Cam Lock with Two Shutter Size - 600W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
Side Cover Panel Legspaceat The End F A Bench Size - 750D x 900 H Side Cover Panel Made Up From CRCA Powder Coated steel.
Main Single Sided Reagent Shelf 2-Tier - 900W x 150D x 660 H With 2 Cutouts For 6 Module Plate On Single Sides
Main Single Sided Reagent Shelf 2-Tier - 1500W x 150D x 660 H With 2 Cutouts For 6 Module Plate On Single Sides
Main Single Sided Reagent Shelf 2-Tier - 1050W x 150D x 660 H With 2 Cutouts For 6 Module Plate On Single Sides
Addon Single Sided Reagent Shelf 2-Tier - 1200W x 150D x 660 H With 2 Cutouts For 6 Module Plate On Single Sides
Ss Sink Rek 2017520 X 440 X 200Mm
3 Way Water Faucet Bench Mounted, 8"" Swing Gooseneck Model No. 100/32
Ms Chemical Storage Cabinet (With Top Cover Panel) Size - 900W x 450D x 1660 H Chemical Storage Made up From CRCA Powder Coated Steel With Adjustable Shelf and 3 point cam lock , in front toughened glass door with metal frame work considered.
Jet Black Granite (Sq.Mt.) 18 (±2) Mm Thk
Masking Tape
6/16A, 6 Pin Shutter Socket - Model No: M1332
6 Module Plate - Model No: Cs956M-S
2F-Amphibian Lab with Preparation Rooms
Main Storage Unit Cam Lock with Two Shutter & One Drawer Size - 750W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
Addon Storage Unit Cam Lock with One Shutter & One Drawer Size - 450W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
3F-Clinical Pharmacology & Pharmacy with Preparation/Ante Room
Main Storage Corner Unit Cam Lock with One Shutter (RH) Size - 900W x 450D x 630 H Storage Unit Made Up From CRCA Powder Coated steel rested on 50x50mm 2mm thick CRCA Frame Work . The Storage Beams of Size 50x50mm are Coming below and top of storage . The Overall Height of Counter is 900mm .
3 Way Water Faucet Bench Mounted, 8"" Swing Gooseneck Model No. 100/32
End Side Panel For Main Unit, 600Mm D, 900Mm Ht.
Providing and Supplying Wooden Centre Table 2100mm L x 900mm D x 750mm Ht made of Solid Wood Structure. The Wood is 50 mm thick and 150mm in Width. The Wooden Structure is finished in Melamine polish.
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 1 seater - 800mm L x 740mm D x 750mm Ht
Providing and Supplying Double Bed having Dimensions: Length (2000mm), Width (1800mm), Height (400mm). The Bed is Openable flap storage type . Bed has Head board and Footboard. Head side Board has 800mm Height and is Aesthetically designed for Elegent Looks.Primary Material: Engineered Panl - PLPB.Color: Natural Wenge,
Providing and Supplying . Office Table having Dimension 1500mm L x 750mm W x 750mm Ht. Worktop is made of 25mmthick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping, Understructure is made of 18mm thick PLPB of Grade II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping .Three no Drawer is built into the table. The Drawers have lock and each drawer is provided with Pull out Handle. 5 Year Warranty.
Providing & Fixing of Cafe table of Size 1800mm x 750mm. The Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should be as per specification and sample approved by client.
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
Providing & Fixing of . Table of Size 900mm L x 600mm D . The Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness .
Budd Chair 1. Leatherette Upholstered Seat & Back 2. Seat Size-530 mm W X470 mm D 3. Back Size – 530 mm W X460 mm HT 4. Base - Powder Coated fixed Base 5. Overall Chair Size - 618 mm W X 615 mm D X 815 mm H
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
Supply and Placing of Racks of Size 900x450x1800mm. Consists of 6 Shelves for Storing purpose.
Providing and Supplying Wooden Chairs made of Solid Wood Structure ans upholstered with foam and fabric . The Wooden Structure is finished in Melamine polish.
Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are made of foam and is finished in leatherite upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client . 1 seater - 800mm L x 740mm D x 750mm Ht
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
Providing and placing Prelaminated Particle Board storage with openable doors of 1000mm L x 300mm D x 600mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 750mm ht and 450mm depth . 5 year Warranty
ACOUSTICAL TREATMENT CEILING:
Ceiling With Micro-perforated 3x3mm Square Gyp Acoustic Board:- Providing & fixing Micro perforated Gyp acoustical ceiling , as marked in the drawings, consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 300mm c/c. The polyester fibre of 1000 gsm density and 50mm thick layed over the made framework and Finished in 12.5mm thick micro-perforated gypsum board, 1200mm x 2400mm, with 3x3mm square perforations in combination with 12.5mm thick gypsum board where ever required.The ceiling to be finished with 2 or more coats of mat type plastic emulsion paint after proper jointing & making surface smooth. All complete as per drawing & design. Approved make of gypsum perforated board: Danoline/ Absound Overseas/Acoustic India.
ACOUSTICAL TREATMENT WALL PANELING:
Wood grained wooden perforated sound absorb slit paneling for rear wall, side walls & stage front: Providing and fixing Wood melamine finish MDF based panels with slit perforations of size 14x40mm to be fixed on walls.The panels shall be with melamine laminate finish of size 1220mm x 610mm x12mm thick having density of 750 to 800kg/m3 . The back of the panels are with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedence method.Panel is to be fixed on GI framework as recommended by the manufacturer with screw fixed horizontal / vertical on GI framework. The cavity of framework should be inserted with 50mm thick, 1000 GSM polyester wadding. Approved make: Anutone/Absound Overseas/Acoustic India
Fabric wrapped Compressed glass substrate panels paneling on rear & side walls : Providing and fixing Acoustical Wall paneling with square edge panels made of fibre glass substrate 25mm thick with a density of 110-120kg/m3, wrapped on the front side with an acoustical fabric with an option of colours as per the choice of the person-in-charge, of size1200mmX600mm with an NRC of upto 1.0 . The panels shall be wrapped with FR grade fabric of approved color & of minimum weigh 340GSM. The panels to be pasted with approved construction adhesives over 9mm thick ply . The 9mm thick ply shall be fixed over GI framing consisting of 48x36x34x0.5mm thick GI Studs wall channels & floor channels @ 600mm c/c. Approved Make : Absound Overseas / Anutone / Acoustic India
Providing & fixing 100 x 15mm high polished teak wood skirting at the bottom of wall paneling.
ACOUSTICAL TREATMENT CEILING:
Stage suspension Grid: Providing & fixing MS suspension grid system over stage for hanging stage services made of 2 nos 40x40x5mm MS angles welded back to back with 50x12x12mm thk studs as MS spacers sandwiched between the MS angles so as to maintain 12mm gap between MS angles, the welded angles to be placed @ 1200mm c/c in one direction and 40x5mm thick MS Tee @ 600mm c/c in other direction. The MS grid to be suspended from the roof structure by means of MS flat suspender of 50x6mm thick MS flats @ 1200mm c/c in both directions. All MS members to be painted with a coat of red oxide primer & 2 or more coats of black enamel paint.
Woodwool fibril acoustical tiles in stage ceiling: Providing and fixing Fibril wood-wool black acoustical tiles of size 1200x600x20 mm, to be installed existing MS suspension grid. Which will comprise of NRC 0.80. Approved make: Absound Overseas / Herra Design / Acoustic India.
ACOUSTICAL TREATMENT WALL PANELING:
UPVC Fabric Stretch Paneling on rear & side walls : Providing & fixing Acoustical wall paneling in Stretched fabric system consisting of FR grade fabric of reqd. colour, 19mm UPVC grippers fixed over 50x12mm thick ply strips on GI frame consisting of 50mm th. GI Stud wall channels & floor channels filled with 50 mm thick 1000GSM thermally bonded polyester wadding .The insulation to be covered from back by covering the frame with 19mm GI wire netting. Approved Make : Absound Overseas / Acoustic India / Anutone.
Stage Walls treatment : Providing and fixing 25mm thick, carpeted fabric wrapped fibril wood wool panels having density of 400kg/cum, fixed over a framework of GI channels consisting of 48x36x34x0.5mm thick GI Stud wall channels & floor channels @ 600mm c/c, filled with 50 mm thick 500GSM thermally bonded polyester wadding to be held in position with 19mm GI wire netting. The panels to be fixed with H-spline system over GI framing. Approved Make : Herra Design/ Acoustic India/ Absound Overseas.
Building ID Signage
Providing & fixing at all heights and locations Letters made up of Stainless steel, grade 316 of approved make made out of laser cut shape in required design, language & font, including buffing, polishing and fixing by sufficient numbers of fastener high quality chemical tape/ adhesive/fast of approved make, all complete as per architectural drawings and direction of Engineer in charge.
Casualty (Hindi+English) Both Side of Porch
Government Medical College & Hospital (Hindi+English)
Block A,B,C
Internal Signage
Providing and Fixing area specially text and graphic signages made out of 18 gauge stainless steel sheet brushed finish as per IS 304, Finish. The text and graphics finished with deep engraved by acid etch silk screen photo process duly filled in stove enamel paint of approved colour and shed the plate should be fixed to be required nos. of stainless steel star screws /3M double side foam adhesive where required directed by the engineer-in-charge.
Room No.
Bed No.
Drinking Water
Washroom Male
Washroom Female
Washroom Specially Abled
Push and Pull
Providing & fixing at all levels and locations, informatory/ directional/warning signages in required font, design, pattern and size made of 4 mm thick odorless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved colour,of approved quality and make, with bevelled edges having self adhesive self luminescent vinyl sheet ( film thickness >150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or approved equivalent over which the signage/ letter cuttout made of vinyl sheet ( film thickness > 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface, all complete as per architectural drawings and direction of Engineer in charge.
Name Plate, Designation Plate
Department Name Plate i.e. X-Ray, Ultrasound, OPD, ICU, OT, MRI, Lab, Etc.
Floor No., Lift Name, Staircase, No Smoking (Hindi+English), Bhawan ko saaf suthra
Emergency Exit, Exit/Nikas
Floor Directory, Chetavani (Hindi), Fire Evacuation Map
Lift Disclaimer, Fire Hose Reel, Fire Hydrant, Danger Sign
Electrical Panel Room, Lift No., Restricted Area, AHU, Keep Silence, No Spiting
Fire Alarm
Designing Providing and Fixing of Pylon both side dimension of pylon 1828x610x100mm made with MS Tube 50x50x2mm structure with MS base plate 150x150x8mm 2nos. including cladding of 4mm thick ACP sheet all around the Pylon with help of double side 3M tape including providing pressure pasting of printed vinyl 3M/Avery 180-C Grade & over laminated of approved brand vinyl fixed by Dash Fastener Hilty/Fisher complete as per architectural drawings and direction of Engineer in charge.
Specialised Work
Supply, Installation, Testing & Commissioning of Analog Phone With Speaker , Small Display etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Hard Disk Special Surveillance 8TB HDD internal( For Servers) etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring workstation System: Intel Core i5 64-bit CPU with Intel HD Graphics or better, 16GB Memory, Windows 10 Pro,Current version of Google Chrome or Microsoft Edge
Supply, Installation, Testing & Commissioning of IP RJ45 Fiber Media Converter | Fiber to Ethernet Converter |10/100/1000Mbps RJ45 Port to 1000Base-LX Single-Mode Fiber etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: CAT6A RJ45 Information Outlet-UTP Cat 6A RJ 45 Sockets,
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Hard Disk Special Surveillance 12 TB HDD internal( For Servers) etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring workstation System: Intel Core i5 64-bit CPU with Intel HD Graphics or better, 16GB Memory, Windows 10 Pro,Current version of Google Chrome or Microsoft Edge
Supply, Installation, Testing & Commissioning of IP RJ45 Fiber Media Converter | Fiber to Ethernet Converter |10/100/1000Mbps RJ45 Port to 1000Base-LX Single-Mode Fiber etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Hard Disk Special Surveillance 12 TB HDD internal( For Servers) etc. all complete.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing and Commissioning Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , up to 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW With Twin Channel True Diversity Wireless Receiver. offers users upto 16 simultaneous operating channels, over a PLL synthesized circuit and anti-interference support, True-Diversity dual channel receiver comes in a 19" rack size and can be mounted using the rack mount accessory. The RF range for the receiver is 100m (Line of Sight)
Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing and Commissioning of 18 AWG (24/0.20mm) x 2 core ATC copper conductor, PE insulated, core twisted in a circular form, Inner sheathed with moisture Proof Polymer, braid shielded (80%) with ATC copper, outer Jacketed with Matt finish Rugged Flexible PVC.
Supply, Installation, Testing and Commissioning of Speaker Cable – 1.5 Sq. mm (48/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath.
Supply, Installation,Testing & Commissioning of 12 U Equipment rack to house all rack mountable equipment, with internal wiring, front glass door,heat dissipation fans,power distribution units etc.complete with standard accessories as required.
Supply, Installation, Testing and Commissioning Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , up to 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW With Twin Channel True Diversity Wireless Receiver. offers users upto 16 simultaneous operating channels, over a PLL synthesized circuit and anti-interference support, True-Diversity dual channel receiver comes in a 19" rack size and can be mounted using the rack mount accessory. The RF range for the receiver is 100m (Line of Sight)
Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing and Commissioning of DLP Solid state(Laser Phosphor) Projection system with ultra short throw lens maximum throw ratio 0.25 UST having 5000 Lumens, 3D available, 1920 x 1200 Resolution,1800:1 Contrast Ratio, illumination Life 20000 hours, Inputs: HDMI, HDBaseT should be complete with standard accessories as required.
Supply, Installation, Testing and Commissioning of 1-chip DLP LASER Phosphor Multimedia Projection system having, 7000 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 1200000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 1.25-2.0 lens. Should be complete with standard accessories as required.
Supply, Installation, Testing & Commissioning of Ceiling Mount kit for projector with all required accessories etc. all complete.
Supply, Installation, Testing & Commissioning of Retractable Motorised Micro Ceiling Lift Voltage: 220V 50Hx or 110V 60Hx, , Dimension: 500×450×200mm (L×W×H), Loading Capacity: 25KG, Travel Length:100 cm with all require accessories etc. all complete.
Supply, Installation,Testing & Commissioning of 80" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing & Commissioning of 120" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing & Commissioning of 150" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing and Commissioning of 75" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,400 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing and Commissioning of Wireless Presentation Solution, enables wireless presentation of 4K Wireless Display, App-free, Wireless Touch, Extended Screen support, shall offer Enterprise Management features, up to four Shared screens simultaneously, and annotate in Office 365 apps and share notes to devices or the front-of-room display, supports display resolutions up to 4K and FUII HD 1080P and UXGA/WUXGA, Provides HDMI / VGA / mini-DisplayPort, and analog audio outputs etc. all compete.
Supply, Installation,Testing & Commissioning of Flush mount Cable Manager with multi-format cables and a comfortable flip-open cover. Shall have 1x universal Power socket, 1x HDMI Cable, 1x USB Charger and etc. complete with standard accessories as required.
Supply, Installation, Testing & Commissioning of Wireless Presenter: Wireless operating distance: Approx 10m, Wireless technology: 2.4GHzwireless technology, Interface: USB etc. all complete.
Supply, Installation, Testing & Commissioning of Ceiling Visualizer, Full HD 1080p high-definition output resolution, 20x optical zoom or more, Ethernet support, Capture Area 1200 x 900 mm or more, Frame Rate Up to 30 fps or more, Built-in Memory 100 JPEG images or more, Image Rotation, Sharpness MTF 900 lines with all required accessories & Ceiling Mount arrangement all complete as required etc. all complete.
Supply, Installation, Testing & Commissioning of HDMI extender set that should have a 2x1 auto switching HDBaseT 2.0 transmitter receiver set that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The set should be 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color.The receiver should features integrated 4 port USB 2.0 high speed device hub. An additional analog audio pass through input should be located on the wall plate that allows for audio distribution to the HDBaseT receiver side. With 48V integrated PoH, the set can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply. The set should give you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It should also turn the display power OFF after a specified amount of time has passed when no video signal is present.
Supply, Installation, Testing & Commissioning of 4x2 HDMI 2.0 Auto-switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, ARC, IR, & RS232 control, Auto-switch or manual switch between four HDMI inputs, 1x HDMI and 1x 3.5mm TRS audio (ARC & audio de-embedding) output Front panel, Supports resolutions up to 4k@60Hz, 4:4:4. 8 bit deep color, Supports HDR formats, HDCP 2.2 compliant, Supports EDID management, Supports CEC pass through control of source / display
Supply, Installation, Testing & Commissioning of eight input by eight output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets. The matrix switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.
Supply, Installation, Testing & Commissioning of HDMI extender set that should have a 2x1 auto switching HDBaseT 2.0 transmitter receiver set that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The set should be 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color.The receiver should features integrated 4 port USB 2.0 high speed device hub. An additional analog audio pass through input should be located on the wall plate that allows for audio distribution to the HDBaseT receiver side. With 48V integrated PoH, the set can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply. The set should give you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It should also turn the display power OFF after a specified amount of time has passed when no video signal is present.
Supply, Installation, Testing & Commissioning of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 100m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)
Supply, Installation, Testing & Commissioning of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 100m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)
Supply, Installation, Testing & Commissioning of UHD Video Conferencing System with 20x Optical PTZ Camera - Phone HD, Dual Display, 4K60 - 1+24 Multipoint 4K license with three year warranty. The system should be of resolution 3840 x 2160 progressive scanning up to 30 frames per second from day one. The system should be able to do Presentation data sharing up to 3840x2160p30. The system should have Bitrates and resolutions (H.264 High Profile). The System should have HD Speaker phone, with inbuilt microphones and touch screen for ease of use from same OEM. The video conference system shall support both H.323 and SIP. The Camera should be 4K UHD Camera. The Camera should have 20x zoom . The system should support Opus, G.722.1 (licensed from Polycom®), G.722, G.711 uLaw and aLaw, Siren 7. Should be supplied with standard accessories as required.
Supply, Installation, Testing & Commissioning of surface-mount condensor Boundary layer microphone wih an omni-directional polar pattern. Frequency Response: 20 Hz - 20 kHz, Sensitivity: -39dBV/Pa, Impedance: 600 Ω or better, Max. SPL: 127 dB, 1 kHz at 1% T.H.D. Complete with standard accessories as required.
Supply, Installation, Testing and Commissioning Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , up to 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW With Twin Channel True Diversity Wireless Receiver. offers users upto 16 simultaneous operating channels, over a PLL synthesized circuit and anti-interference support, True-Diversity dual channel receiver comes in a 19" rack size and can be mounted using the rack mount accessory. The RF range for the receiver is 100m (Line of Sight)
Supply, Installation, Testing and Commissioning Wireless Lavaliere Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver), Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation Up to 48 Simultaneous channels, up to 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D. 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW
Supply, Installation, Testing and Commissioning of 18" Gooseneck microphone with base, shall have a condenser diaphragm to deliver superior sonic performance. The diaphragms are specially tuned to provide a boost in the human vocal range. Frequency Response: 20 Hz - 17 kHz, Polar Pattern: Cardioid, Sensitivity: -36±3 dB* (15.8mV) 0dB =1V /Pa,1kHz, Max SPL : 140 dB, 1 kHz at 1% T.H.D.
Supply, installation, testing & Commissioning of Digital Interactive Podium in Metallic Frame with 21 inch Full HD (Electromagnetic + Capacitive) Interactive Display with Electromagnetic Pen, with Motorized Tilting of the Interactive Panel, with provision to install Gooseneck Microphone, Interactive panel, Keyboard Tray, Visualizer Tray and space to store AV equipment, Interactive display with full HD resolution of 1920x1080, Technology IPS LCD, Aspect ratio16:9, Brightness 200 cd/m2, Contrast ratio1000:1, Pen Type shall be Pressure-sensitive and cordless. Top connectivity plate with HDMI, USB x 2, VGA + Audio and Power socket for external Laptop connectivity, built-in 4 x 2 HDMI Matrix Switcher with 4K@60Hz (4:4:4, 8- bit) as well as support for 16-bit Deep Colour, HDR (High Dynamic Range), 3D contents, HD audio and other features defined by HDMI 2.0 specification and Audio De-embedded for internal connectivity. Shall have built-in 9 U Rack space to accommodate AV Equipment. Should be supplied with i5 Mini PC with Window 10 and Keyboard & mouse etc. as required.
Supply, Installation, Testing & Commissioning of DVD/Blu-ray Player with USB option etc. all complete.
Supply, installation, testing and commissioning of Wall Mountable Multidriver (8 or better) vocal range line-array column speaker. The louspeaker shall meet the following performance criteria: Frequncy Range (-10 dB) of 100Hz - 16 kHz or better. Long term power handling of 300 Watts or more. The Loudspeaker shall have a Max. SPL (Peak) of >=119dB with a senstivity of 88 dB SPL and a dispersion of 130° H x 20° V or better. The loudspeaker system shall have a norminal impedence of 8 ohms. Optional 70/100V OEM transformer module with tap settings shall be available.
Supply, Installation, testing and commissioning of high impedence Class D Dual zone amplifier with output power of upto 2x120W @ 70/100V. frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, testing and commissioning of high impedence Class D Dual zone amplifier with output power of upto 2x120W @ 70/100V. frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing & Commissioning of Class D configurable amplifier with total 4 x 300W / 2 x 600W output power or better @ 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD <0.04% at rated output complete with standard accessories as required.
Supply, Installation, testing and commissioning of Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and Compressors, British EQ and USB/Audio Interface, Built-in stereo USB/Audio Interface to connect directly to computer. 1 post fader FX send per channel for external FX devices, Main mix outputs plus separate control room, phones and 2-Track outputs, 2-Track inputs assignable to main mix or control room/phones outputs.
Supply, Installation, Testing and Commissioning of Control system have minimum 8 bidirectional RS232, 8 IR, 8 Relays and 8 GP/IO and 1 Ethernet port to control all the devices in the room. Should have inbuilt or external IR sensor/learner to learn IR commands The compatible relay controller to control the Projector screen up down should be supplied as a package (may be from same OEM of controller or different). Should have inbuilt processing power and internal storage to store and process the control program. Should be compatible with any (IOS/Android) wireless or wired Touch screen of any size. Additional ports if required can be added with minimum hassle. Should have the flexibility to add as many user interfaces as required. Should have embedded webpage for control port settings. Should have Status LED to check for Control/Connection status. It should have minimum 5 license each included for both iOS & Android application Certification: CE, ISO 9001, ISO 14001, OHSAS 18001. Extra component or equipment maybe added to match the complete specs. Should be supplied with standard accessories as required.
Supply, Installation, Testing and Commissioning of Wall & Table Mount PoE Touch Panel have 7” or more IPS color screen. Should have minimum 1280 x 800 resolution, brightness 4000cd/m2, contrast ratio 800:1, 16:10 aspect ratio Should have inbuilt Wi-Fi, 802.11 b/g/n/ac, Bluetooth 4.0 Should have capacitive touch technology. Should support Multitouch. CPU performance: 1.6GHz Quad Core, GPU, 2GB RAM, 16GB flash. Should be able to decode video format HEVC/H.265, H.264, H.263, MPEG–1/2/4, VC–1, VP6/8, RV8/9/10, AVS, MVC, Sorenson Spark, M–JPEG Should be able to encode/stream video format H.264, MVC, VP8, M–JPEG Should have front 2MP camera, HD 720p. Should have Ethernet port 10/100/1000Mbps PoE LAN. Should have inbuilt mic and speaker. Should be provided with table mount & wall mount kit. Secured Operation - Highly secured operation of applications using password protection, hidden control buttons and more. Red LED alert when camera is active. should be possible with Customized GUI using same OEM GUI Software. should support native integration of same OEM enterprise management software. Certification: CE, FCC, ROHS, REACH, ISO 9001, ISO 14001, OHSAS 18001. Extra component or equipment may be added to match the complete specs. Should be supplied with standard accessories as required.
Supply, Installation, Testing & Commissioning of Enterprise-class Designer wall-mount keypad, Standard electrical box installation, 8 button configurations, Connetivity with Central control system etc. all complete.
Supply, Installation, Testing & Commissioning of Programmable 8 Port Relay Module & 4 digital / analogue input module 0-24 Volts DC, low-voltage relay, 6 Watts Power @ 12Volts / 240 V, 44k Input Impedence with cables & connectors as required etc. all complete.
Supply, Installation, Testing & Commissioning of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs, 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of time and date stamp. OEM should be CE, FCC, RoHS & BIS Certified
Supply, Installation, Testing & Commissioning of Full HD 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver and should be NDI compatible. OEM should be CE, FCC, RoHS & BIS Certified
Supply, Installation, Testing & Commissioning of Category 6A F/UTP EN Series 23 AWG 4 Pair Shielded Cable. Solid annealed bare copper conductors, High density polyethylene insulation, 4 pairs twisted in varying lays and cabled, Flame rated PVC jacket, TIA/EIA-568-C Category 6A, NEC CMR, CEC CMR FT4, RoHS compliant.
Supply, Installation, Testing & Commissioning of High−performance 15 ft cable that supports signals up to 4K@60Hz (4:4:4), Deep color Should have Gold Plated pins with 28 AWG.Flammability Rating should be CL3/FT4,: RoHS 2011/65/ EU
Supply, Installation, Testing & Commissioning of High−performance 35 ft cable that supports signals up to 4K@60Hz (4:4:4), Deep color Should have Gold Plated pins with 28 AWG.Flammability Rating should be CL3/FT4,: RoHS 2011/65/ EU
Supply, Installation, Testing & Commissioning of High−performance 50 ft cable that supports signals up to 4K@60Hz (4:4:4), Deep color Should have Gold Plated pins with 28 AWG.Flammability Rating should be CL3/FT4,: RoHS 2011/65/ EU
Supply, Installation, Testing & Commissioning of High−performance 6 ft cable that supports signals up to 4K@60Hz (4:4:4), Deep color Should have Gold Plated pins with 28 AWG.Flammability Rating should be CL3/FT4,: RoHS 2011/65/ EU
Supply, installation , testing and Commissioning of VGA with Audio cable (15 feet). High−performance cable with male 15−pin HD and 3.5mm stereo audio connectors at each end. Should have Gold Plated pins. Should have conductor 26 AWG 7/34 tinned copper All pins should be connected for DDC2 and EDID support. Should be maximum 0.35 inch in diameter. Outer Jacket should be HD polyethylene, Dielectric: Foam polyethylene. Compliance: UL: CL2, CSA: C(UL) CL2
Supply, installation , testing and Commissioning of VGA with Audio cable (35 feet). High−performance cable with male 15−pin HD and 3.5mm stereo audio connectors at each end. Should have Gold Plated pins. Should have conductor 26 AWG 7/34 tinned copper All pins should be connected for DDC2 and EDID support. Should be maximum 0.35 inch in diameter. Outer Jacket should be HD polyethylene, Dielectric: Foam polyethylene. Compliance: UL: CL2, CSA: C(UL) CL2
Supply, installation , testing and Commissioning of VGA with Audio cable (3 feet). High−performance cable with male 15−pin HD and 3.5mm stereo audio connectors at each end. Should have Gold Plated pins. Should have conductor 26 AWG 7/34 tinned copper All pins should be connected for DDC2 and EDID support. Should be maximum 0.35 inch in diameter. Outer Jacket should be HD polyethylene, Dielectric: Foam polyethylene. Compliance: UL: CL2, CSA: C(UL) CL2
Supply, Installation, Testing & Commissioning of Various Connectors For Above Mentioned Configuration etc. all complete.
Supply, Installation, Testing & Commissioning of Rack Structure 20 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete.
Supply, Installation, Testing & Commissioning of Rack Structure 12 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing and Commissioning of 18 AWG (24/0.20mm) x 2 core ATC copper conductor, PE insulated, core twisted in a circular form, Inner sheathed with moisture Proof Polymer, braid shielded (80%) with ATC copper, outer Jacketed with Matt finish Rugged Flexible PVC.
Supply, Installation, Testing and Commissioning of DLP Solid state(Laser Phosphor) Projection system with ultra short throw lens maximum throw ratio 0.25 UST having 5000 Lumens, 3D available, 1920 x 1200 Resolution,1800:1 Contrast Ratio, illumination Life 20000 hours, Inputs: HDMI, HDBaseT should be complete with standard accessories as required.
Supply, Installation, Testing and Commissioning of 1-chip DLP LASER Phosphor Multimedia Projection system having, 7000 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 1200000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith 1.25-2.0 lens. Should be complete with standard accessories as required.
Supply, Installation,Testing & Commissioning of 80" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing & Commissioning of 120" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing & Commissioning of 150" diagonal motorized projection screen with an aspect ratio of 16:10. Screen fabric should in accordance with DIN 4102-1 Class B2 materials. Screen should Sustain temperature of 23 ± 2 °C, and a relative humidity of 50 ± 6 %. Should equipped with RS 232/485 Relay Connectivity. Screen Should have Anti Heat Cut off Option to avoid any Calamity at site. Heavy Dowel to maintain Flatness. Screen Fabric should meet the requirements of Class B2 of building materials. Should be supplied with complete standard accessories as required.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing and Commissioning of 75" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,400 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing and Commissioning of Wireless Presentation Solution, enables wireless presentation of 4K Wireless Display, App-free, Wireless Touch, Extended Screen support, shall offer Enterprise Management features, up to four Shared screens simultaneously, and annotate in Office 365 apps and share notes to devices or the front-of-room display, supports display resolutions up to 4K and FUII HD 1080P and UXGA/WUXGA, Provides HDMI / VGA / mini-DisplayPort, and analog audio outputs etc. all compete.
Supply, Installation,Testing & Commissioning of Flush mount Cable Manager with multi-format cables and a comfortable flip-open cover. Shall have 1x universal Power socket, 1x HDMI Cable, 1x USB Charger and etc. complete with standard accessories as required.
Supply, Installation, Testing & Commissioning of Ceiling Visualizer, Full HD 1080p high-definition output resolution, 20x optical zoom or more, Ethernet support, Capture Area 1200 x 900 mm or more, Frame Rate Up to 30 fps or more, Built-in Memory 100 JPEG images or more, Image Rotation, Sharpness MTF 900 lines with all required accessories & Ceiling Mount arrangement all complete as required etc. all complete.
Supply, Installation, Testing & Commissioning of HDMI extender set that should have a 2x1 auto switching HDBaseT 2.0 transmitter receiver set that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The set should be 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color.The receiver should features integrated 4 port USB 2.0 high speed device hub. An additional analog audio pass through input should be located on the wall plate that allows for audio distribution to the HDBaseT receiver side. With 48V integrated PoH, the set can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply. The set should give you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It should also turn the display power OFF after a specified amount of time has passed when no video signal is present.
Supply, Installation, Testing & Commissioning of 4x2 HDMI 2.0 Auto-switcher, 4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, ARC, IR, & RS232 control, Auto-switch or manual switch between four HDMI inputs, 1x HDMI and 1x 3.5mm TRS audio (ARC & audio de-embedding) output Front panel, Supports resolutions up to 4k@60Hz, 4:4:4. 8 bit deep color, Supports HDR formats, HDCP 2.2 compliant, Supports EDID management, Supports CEC pass through control of source / display
Supply, Installation, Testing & Commissioning of eight input by eight output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets. The matrix switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.
Supply, Installation, Testing & Commissioning of HDMI extender set that should have a 2x1 auto switching HDBaseT 2.0 transmitter receiver set that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The set should be 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color.The receiver should features integrated 4 port USB 2.0 high speed device hub. An additional analog audio pass through input should be located on the wall plate that allows for audio distribution to the HDBaseT receiver side. With 48V integrated PoH, the set can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply. The set should give you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It should also turn the display power OFF after a specified amount of time has passed when no video signal is present.
Supply, Installation, Testing & Commissioning of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 100m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)
Supply, Installation, Testing & Commissioning of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 100m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)
Supply, Installation, Testing & Commissioning of UHD Video Conferencing System with 20x Optical PTZ Camera - Phone HD, Dual Display, 4K60 - 1+24 Multipoint 4K license with three year warranty. The system should be of resolution 3840 x 2160 progressive scanning up to 30 frames per second from day one. The system should be able to do Presentation data sharing up to 3840x2160p30. The system should have Bitrates and resolutions (H.264 High Profile). The System should have HD Speaker phone, with inbuilt microphones and touch screen for ease of use from same OEM. The video conference system shall support both H.323 and SIP. The Camera should be 4K UHD Camera. The Camera should have 20x zoom . The system should support Opus, G.722.1 (licensed from Polycom®), G.722, G.711 uLaw and aLaw, Siren 7. Should be supplied with standard accessories as required.
Supply, Installation, Testing & Commissioning of a Audio Conference Server with the below specifications : Max. Conference Microphones: 800, Frequency Response: 20 - 20kHz, Dynamic Range: >85 dB, Auto PC Software for a controlled meeting, Anti-feedback control, Audio Inputs & Outputs to connect to the amplifier, speaker and microphone systems
Supply, Installation, Testing & Commissioning of Chairman unit with the below specifications:- 3-button Voting Options, Built-in Spekaer system & headphone output. Includes (1) 18" Gooseneck Microphone (true condenser, super-cardioid)
Supply, Installation, Testing & Commissioning of a Delegate Unit with the below specifications:- 3-button Voting Options, Built-in Spekaer system & headphone output. Includes (1) 18" Gooseneck Microphone (true condenser, super-cardioid)
Supply, Installation, Testing and Commissioning Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , up to 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW With Twin Channel True Diversity Wireless Receiver. offers users upto 16 simultaneous operating channels, over a PLL synthesized circuit and anti-interference support, True-Diversity dual channel receiver comes in a 19" rack size and can be mounted using the rack mount accessory. The RF range for the receiver is 100m (Line of Sight)
Supply, Installation, Testing and Commissioning Wireless Lavaliere Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: <0.3% (Receiver), Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation Up to 48 Simultaneous channels, up to 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D. 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW
Supply, installation, testing & Commissioning of Digital Interactive Podium in Metallic Frame with 21 inch Full HD (Electromagnetic + Capacitive) Interactive Display with Electromagnetic Pen, with Motorized Tilting of the Interactive Panel, with provision to install Gooseneck Microphone, Interactive panel, Keyboard Tray, Visualizer Tray and space to store AV equipment, Interactive display with full HD resolution of 1920x1080, Technology IPS LCD, Aspect ratio16:9, Brightness 200 cd/m2, Contrast ratio1000:1, Pen Type shall be Pressure-sensitive and cordless. Top connectivity plate with HDMI, USB x 2, VGA + Audio and Power socket for external Laptop connectivity, built-in 4 x 2 HDMI Matrix Switcher with 4K@60Hz (4:4:4, 8- bit) as well as support for 16-bit Deep Colour, HDR (High Dynamic Range), 3D contents, HD audio and other features defined by HDMI 2.0 specification and Audio De-embedded for internal connectivity. Shall have built-in 9 U Rack space to accommodate AV Equipment. Should be supplied with i5 Mini PC with Window 10 and Keyboard & mouse etc. as required.
Supply, installation, testing and commissioning of Wall Mountable Multidriver (8 or better) vocal range line-array column speaker. The louspeaker shall meet the following performance criteria: Frequncy Range (-10 dB) of 100Hz - 16 kHz or better. Long term power handling of 300 Watts or more. The Loudspeaker shall have a Max. SPL (Peak) of >=119dB with a senstivity of 88 dB SPL and a dispersion of 130° H x 20° V or better. The loudspeaker system shall have a norminal impedence of 8 ohms. Optional 70/100V OEM transformer module with tap settings shall be available.
Supply, Installation, testing and commissioning of high impedence Class D Dual zone amplifier with output power of upto 2x120W @ 70/100V. frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, testing and commissioning of high impedence Class D Dual zone amplifier with output power of upto 2x120W @ 70/100V. frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
Supply, Installation, Testing & Commissioning of Class D configurable amplifier with total 4 x 300W / 2 x 600W output power or better @ 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD <0.04% at rated output complete with standard accessories as required.
Supply, Installation, Testing and Commissioning of Control system have minimum 8 bidirectional RS232, 8 IR, 8 Relays and 8 GP/IO and 1 Ethernet port to control all the devices in the room. Should have inbuilt or external IR sensor/learner to learn IR commands The compatible relay controller to control the Projector screen up down should be supplied as a package (may be from same OEM of controller or different). Should have inbuilt processing power and internal storage to store and process the control program. Should be compatible with any (IOS/Android) wireless or wired Touch screen of any size. Additional ports if required can be added with minimum hassle. Should have the flexibility to add as many user interfaces as required. Should have embedded webpage for control port settings. Should have Status LED to check for Control/Connection status. It should have minimum 5 license each included for both iOS & Android application Certification: CE, ISO 9001, ISO 14001, OHSAS 18001. Extra component or equipment maybe added to match the complete specs. Should be supplied with standard accessories as required.
Supply, Installation, Testing and Commissioning of Wall & Table Mount PoE Touch Panel have 7” or more IPS color screen. Should have minimum 1280 x 800 resolution, brightness 4000cd/m2, contrast ratio 800:1, 16:10 aspect ratio Should have inbuilt Wi-Fi, 802.11 b/g/n/ac, Bluetooth 4.0 Should have capacitive touch technology. Should support Multitouch. CPU performance: 1.6GHz Quad Core, GPU, 2GB RAM, 16GB flash. Should be able to decode video format HEVC/H.265, H.264, H.263, MPEG–1/2/4, VC–1, VP6/8, RV8/9/10, AVS, MVC, Sorenson Spark, M–JPEG Should be able to encode/stream video format H.264, MVC, VP8, M–JPEG Should have front 2MP camera, HD 720p. Should have Ethernet port 10/100/1000Mbps PoE LAN. Should have inbuilt mic and speaker. Should be provided with table mount & wall mount kit. Secured Operation - Highly secured operation of applications using password protection, hidden control buttons and more. Red LED alert when camera is active. should be possible with Customized GUI using same OEM GUI Software. should support native integration of same OEM enterprise management software. Certification: CE, FCC, ROHS, REACH, ISO 9001, ISO 14001, OHSAS 18001. Extra component or equipment may be added to match the complete specs. Should be supplied with standard accessories as required.
Supply, Installation, Testing & Commissioning of Programmable 8 Port Relay Module & 4 digital / analogue input module 0-24 Volts DC, low-voltage relay, 6 Watts Power @ 12Volts / 240 V, 44k Input Impedence with cables & connectors as required etc. all complete.
Supply, Installation, Testing & Commissioning of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs, 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of time and date stamp. OEM should be CE, FCC, RoHS & BIS Certified
Supply, Installation, Testing & Commissioning of Full HD 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver and should be NDI compatible. OEM should be CE, FCC, RoHS & BIS Certified
Supply, Installation, Testing & Commissioning of 18 AWG (24/0.20mm) x 2 core ATC copper conductor, PE insulated, core twisted in a circular form, Inner sheathed with moisture Proof Polymer, braid shielded (80%) with ATC copper, outer Jacketed with Matt finish Rugged Flexible PVC.
Supply, installation , testing and Commissioning of VGA with Audio cable (3 feet). High−performance cable with male 15−pin HD and 3.5mm stereo audio connectors at each end. Should have Gold Plated pins. Should have conductor 26 AWG 7/34 tinned copper All pins should be connected for DDC2 and EDID support. Should be maximum 0.35 inch in diameter. Outer Jacket should be HD polyethylene, Dielectric: Foam polyethylene. Compliance: UL: CL2, CSA: C(UL) CL2
Supply, Installation, Testing & Commissioning of Various Connectors For Above Mentioned Configuration etc. all complete.
Supply, Installation, Testing & Commissioning of Rack Structure 20 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete.
Supply, Installation, Testing & Commissioning of Rack Structure 12 U Air Cooled AV Equipment Rack with Two Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs.
SITC OF "IT ACTIVE, PASSIVE, Wi Fi & EPBAX SYSTEM
Supply, Installation, Testing & Commissioning of Cat-6A Mounting Cords 7 Feet for Data as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Cat-6A Mounting Cords 4 Feet for Data Jack Panel end as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Cat-6A, 24 Port Jack Panel for data as per given Specification etc. all complete. Approved Makes:Legrand/Molex/Panduit
Supply, Installation, Testing & Commissioning of Cat-6A Mounting Cords 4 Feet for Voice Jack Panel end as per given Specification etc. all complete. Approved Makes:Legrand/Molex/Panduit
Supply, Installation, Testing & Commissioning of Cat-6A 24 Port Jack Panel for Voice Field as per given Specification etc. all complete. Approved Makes:Legrand/Molex/Panduit
Supply, Installation, Testing & Commissioning of Cat-6A 24 Port Jack Panel for Voice Field & Resource as per given Specification etc. all complete. Approved Makes:Legrand/Molex/Panduit
Supply, Installation, Testing & Commissioning of 15 U Wall Mount Rack as per given Specification etc. all complete. Approved Make: Sudpi/Chief/Middle Atlantic
Supply, Installation, Testing & Commissioning of 1 U PVC Cable Manager as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 6 socket PDU as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Mounting Hardware pack of 10pcs as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 10 Pair Krone Module as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 200 Pair MDF Box with Mounting Frame as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 25 Pair Riser cable as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 2 port faceplate with Gang Box etc. all complete.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete. (305 mtrs Roll)
Supply, Installation, Testing & Commissioning of UTP Cat-6A Information Outlet Red for Data as per specification etc. all complete
Supply, Installation, Testing & Commissioning of UTP Cat-6A Information Outlet Yellow for Voice as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of 600 Pair MDF Box with Mounting Frame as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 300 Pair MDF Box with Mounting Frame as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 1800 Pair MDF Box with Mounting Frame as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of DK PS Frame,1000Wx2000Hx1200D (2nos. of 1000Wx2000Hx600D with Baying tube), Top cover with rear fixed & slideable gland plate with foam insert for cable entry, bottom cover with standard gland plates with foam insert for cable entry and rear 4nos. of 50mm dia rubber grommets as per std., 2 pairs of 42U 19" L - type angles & special assembly kit for mounting 19" angles & punched sections, Complete with 11 KVA Power and 7TR Cooling in complete. It consist of in built Temperature, Humidity, Automatic door opening & leakage Monitoring System. with Signal Pillar Fire Extinguisher System as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 6 Core Single Mode Fiber ( Armored) Cable as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 12 Port Fiber LIU Loaded with SC SM Coupler, as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 24 Port Fiber LIU Loaded with SC SM Coupler, as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of SC SM Pigtail (1.0 Mtr) as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of SC-LC SM Fiber Patch Cords ( 3 Mtr) as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 6 Core Multi Mode Fiber ( Armored) Cable as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 12 Port Fiber LIU Loaded with SC MM Coupler, as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 24 Port Fiber LIU Loaded with SC MM Coupler, as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of SC MM Pigtail (1.0 Mtr) as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Blank Panel for LIU as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of SC-LC MM Fiber Patch Cords ( 3 Mtr) as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 QuikLock Coupler etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Channel etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 2x2 Hinged Cover etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Snap-On Hinged Cover etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 QuikLock Trapeze Bracket - 1/2'' Threaded Rod etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner Spill-Over Junction with 2x2 Exit (yellow) etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner Spill-Over Junction with 2x2 Exit - Fiber Runner 4x4 Channel Cover (yellow) etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 2x2 QuikLock Coupler etc. all complete.
Supply, Installation, Testing & Commissioning of Corrugated Loom Tubing - 1.5'' I.D. etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 2x2 Hinged Channel - Mounting Holes etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 End Cap etc. all complete.
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Horizontal Tee Fitting etc. all complete. Ap
Supply, Installation, Testing & Commissioning of Fiber Runner 4x4 Horizontal Tee Split Cover etc. all complete.
Supply, Installation, Testing & Commissioning of Fitting, 1-Port Spill out to 1.5'' (38mm) Inside Diameter Corrugated Tubing, YL etc. all complete.
Supply, Installation, Testing & Commissioning of QuikLock Hardware Nut Driver etc. all complete.
Supply, Installation, Testing & Commissioning of Full-length blanking shade blanks etc. all complete.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Core Switch with switching capacity of 4Tbps, forwarding performance of 2Bpps with 48 x 1/10G/25G SFP+/SFP28 ports from day 1 and upto 8x40/100 QSFP28 ports for stacking/uplink. MAC address 96k, 128k IPv4, 7K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Management Platform. Controller should not be cloud based . The Solution should support 802.11ax primarily . The solution should also support 802.11ax with Guest Portal support, support WIPS, Rouge AP detection .Controller should be able to monitor,manage and configure both WiFi and Switches from the same GUI. Controller should be able to integrate with varous authentication mechanism including the RADIUS servers. WLC should be scalable to handle upto 2000 APs. Wireless Controller should be NDPP , TEC Certified .All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Layer 2 48 Port PoE Access Switches with switching capaticy of 296 Gbps, forwarding performance 220 Mpps, having 48 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. .
Supply, Installation, Testing & Commissioning of Layer 2 24 Port PoE Access Switches with switching capaticy of 248 Gbps, forwarding performance 184 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. .
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Internet Firewall as per the given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Internet Router which can support the Fiber Line as per the given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of Mail & Database Server which can support the data and Mail system as per the given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of 100% Non Blocking Fully Digital Integrated Services Digital Network (ISDN) Compatible Voice Over Internet Telephone(VoIP) ready 19" Rack mountable EPABX presently equiped with 06 ISDN PRI Trunk Lines (180 Channel), 32 IP Extension, 64 Digital Extension, 1200 Analogue Extension, Expandable up to 2000 Ports / Channels and other as per the given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of IP User Linceses for 10 Users etc. all complete.
Supply, Installation, Testing & Commissioning of 16 Port Digital Card etc. all complete.
Supply, Installation, Testing & Commissioning of 24 Port Analouge Card etc. all complete.
Supply, Installation, Testing & Commissioning of High End Digital Key Phone 6x24 Display with 24 Programmable Dual Color LED’s with 4 Feature Access Keys, multi-step Tilt angle adjustment, Navigator Key, backlit display, should have option to connect Blue Tooth etc. all complete.
Supply, Installation, Testing & Commissioning of Low end DIgital Key Phone 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete.
Supply, Installation, Testing & Commissioning of IP PHONE with color Touch LCD screen, built-in graphical user interface (GUI). Includes built-in speakerphone, SD card slot for programming and data backup, Bluetooth compatible (with optional module), able to register IP Cameras and control PTZ functionality ,Blue Tooth , Power over Ethernet (PoE) etc. all complete.
Supply, Installation, Testing & Commissioning of IP Phone 1x16 Display with 8 Programmable Dual Color LED’s etc. all complete.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of DK PS Frame,1000Wx2000Hx1200D (2nos. of 1000Wx2000Hx600D with Baying tube), Top cover with rear fixed & slideable gland plate with foam insert for cable entry, bottom cover with standard gland plates with foam insert for cable entry and rear 4nos. of 50mm dia rubber grommets as per std., 2 pairs of 42U 19" L - type angles & special assembly kit for mounting 19" angles & punched sections, Complete with 11 KVA Power and 7TR Cooling in complete. It consist of in built Temperature, Humidity, Automatic door opening & leakage Monitoring System. with Signal Pillar Fire Extinguisher System as per given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Management Platform. Controller should not be cloud based . The Solution should support 802.11ax primarily . The solution should also support 802.11ax with Guest Portal support, support WIPS, Rouge AP detection .Controller should be able to monitor,manage and configure both WiFi and Switches from the same GUI. Controller should be able to integrate with varous authentication mechanism including the RADIUS servers. WLC should be scalable to handle upto 2000 APs. Wireless Controller should be NDPP , TEC Certified .All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Layer 2 48 Port PoE Access Switches with switching capaticy of 296 Gbps, forwarding performance 220 Mpps, having 48 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. .
Supply, Installation, Testing & Commissioning of Layer 2 24 Port PoE Access Switches with switching capaticy of 248 Gbps, forwarding performance 184 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. .
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of 100% Non Blocking Fully Digital Integrated Services Digital Network (ISDN) Compatible Voice Over Internet Telephone(VoIP) ready 19" Rack mountable EPABX presently equiped with 06 ISDN PRI Trunk Lines (180 Channel), 32 IP Extension, 64 Digital Extension, 1200 Analogue Extension, Expandable up to 2000 Ports / Channels and other as per the given Specification etc. all complete.
Supply, Installation, Testing & Commissioning of High End Digital Key Phone 6x24 Display with 24 Programmable Dual Color LED’s with 4 Feature Access Keys, multi-step Tilt angle adjustment, Navigator Key, backlit display, should have option to connect Blue Tooth etc. all complete.
Supply, Installation, Testing & Commissioning of IP PHONE with color Touch LCD screen, built-in graphical user interface (GUI). Includes built-in speakerphone, SD card slot for programming and data backup, Bluetooth compatible (with optional module), able to register IP Cameras and control PTZ functionality ,Blue Tooth , Power over Ethernet (PoE) etc. all complete.
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Supply , Installation , Testing and Commissioning of Distribution Switch with switching capacity of 720Gbps, forwarding performance of 533Mpps with 16 x 1/10G SFP+ ports plus 8x 10/25G SFP+/SFP28 ports from day 1, MAC address 32k, 16k IPv4, 4K IPv6 routes . Should support advance layer 3 (OSPF, BGP , PIM,VRRP, VRRP-E,GRE,MSDP,ECMP,RIPng) with 3 year OEM remote support and warranty. Switch OS series should be NDPP certified , TAA compliant. All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of Layer 2 24 Port PoE Access Switches with switching capaticy of 248 Gbps, forwarding performance 184 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. .
Supply, Installation, Testing & Commissioning of Dual band Wireless Indoor Access Point support 802.11ax(WiFi6) with Combined data rate support of 2.9Gbps with 4x4:4 on 5Ghz.Wireless Access Point should have inbuilt omnidirectional antennas with minimum 3 dBi peak gain on both 2.4Ghz and 5Ghz.Operating temp: 0 to 50 degree. WAP should support OFDMA, MU-MIMO, dual ports, PoH/uPoE/802.3at PoE support .Should have min transmit power of 26dbm. Access point should have minimum 1x 2.5 Gigabit Ethernet port and 1x 1 Gigabit Ethernet Port . AP should work with on prem controller and if required should also act as a controller to manage upto 128AP's . AP should be NDPP, WIFI Alliance, RoHS and TEC certified and should come with limited lifetime warranty. Mounting kit to be included.All WiFi and Switches, Tranceivers should be from the same OEM.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: 12 to 48 Port Rack mount Sliding Fibre optic drawer (LIU),USE-Metal 19” pre-equipped fibre optic drawers, 4 cable entries,supplied,with screw fixing kit, 2 cable glands (Ø 13.5 and 16 mm), coiling system and splicing cassette. , Panel and optical ports marked on dedicated marking area, Sliding: end stop at a 30° angle for easier wiring, 12 SC Multi-mode Duplex, 24 LC Multi-mode Duplex, 24 ST Multi-mode, 12 SC Single-mode Duplex, 24 LC APC Single-mode Duplex.
Supply, Installation, Testing & Commissioning of Video Wall Panel: 46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA.Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 802.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz. (305 mtrs roll)
Supply, Installation, Testing & Commissioning of 6 Core - Optic fibre cable OS 1/OS 2 - Unitube Single Jacket Armor Lite,Lan backbones,Outdoor direct burial,Tunnels, This specification covers an optical cable with 2 - 24 optical fibres of UNI tube construction. The cable is armoured thus making it suitable for installation outdoors in harsh environments. The armouring does also make the cable rodent proof, Standards-ISO 11801 2nd edition, EN 50173-1:2002, IEC 60794-1,
Supply, Installation, Testing & Commissioning of Accessories for IP55 Outdoor Junction Box For Field Devices. JB must be of appropriate size to house different components as per CCTV system design confirming to tender specifications. The junction box shall be provided with external earthing lugs 5 socket Power terminaton with MCB or More Proper/Steady fixing along with Pole (either through RCC base or weather proof clamping with pole) as per site requirements is under bidder’s scope etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: 12 to 48 Port Rack mount Sliding Fibre optic drawer (LIU),USE-Metal 19” pre-equipped fibre optic drawers, 4 cable entries,supplied,with screw fixing kit, 2 cable glands (Ø 13.5 and 16 mm), coiling system and splicing cassette. , Panel and optical ports marked on dedicated marking area, Sliding: end stop at a 30° angle for easier wiring, 12 SC Multi-mode Duplex, 24 LC Multi-mode Duplex, 24 ST Multi-mode, 12 SC Single-mode Duplex, 24 LC APC Single-mode Duplex.
Supply, Installation, Testing & Commissioning of Video Wall Panel: 46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA.Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 802.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz. (305 Mtrs Roll)
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of Video Wall Panel: 46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA.Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 802.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz.
Supply, Installation, Testing & Commissioning of IP CCTV Camera: Panoramic camera: 12MP with active pixel 3008 x 3008,1/2.3” progressive scan CMOS, 360 deg view, 1.6mm lens,IR Range 10meter, MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, Built-in microphone.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Camera: Multisensor Camera, 1/2.5" progressive scan, 4 x 8MP, 4 X 3840X2160 resolution, 4/ 5.2/ 2.8 mm lens,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots. For this Building bidder to consider enetrprise solution with client server architechture
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of Video Wall Panel:46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA. Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 80 2.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz. (305 Mtrs Roll)
Supply, Installation, Testing & Commissioning of Access Control System: Double-door Access Controller, Storage with 100,000 cards and 300,000 access control events.Uplink Communication: TCP/IP 、ISUP5.0 and RS-485;ISAPI、OSDP;Accessible Card Reader: 4 Wiegand readers or 4 RS485 readers; Input interface: 4 alarm input, Door Sensor×2, Door Switch×2, Case Input×4, Fire Alarm Linkage×1, Tamper-proof×1;Output interface: Door Switch Relay×2, Alarm Relay×2. UL294 Standard Qualified;With plastic case for mainboard protection;Isolate High Voltage and Low Voltage design;Backup battery design Partial-PoE, SI Scope-Battery
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: Two Door Panel Enclosure with 12VDC, 2 Amps Power supply etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: Exit Push Button SS etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Electro Magnetic Lock Single Leaf, Fail safe type, Holding force: 272kg(600lbs), Current Drain:320mA/12VDC, Built-in voltage spiker suppressor to protect the lock body and equipments, lock body and armature with chemical plating anticorrosion finished, With LED light & brackets etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Electro Magnetic Lock Double Leaf, Fail safe type, Holding force: 272kg(600lbs), Current Drain:320mA/12VDC, Built-in voltage spiker suppressor to protect the lock body and equipments, lock body and armature with chemical plating anticorrosion finished, With LED light & brackets etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Smart Card Redaer, Technology: Contactless Smartcard , Frequency : 13.56 MHz Read Range : MIFARE 6c, DESFire EV1 4cm Certifications:FCC, CE Audio Tone Built-in piezo sounder Visual annunciation Bi-color LED etc. all complete.
Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation (13.56 MHz) Read Range Up to 2.75 inches (70 mm) ISO Standards: NonCopiable/Nonclonable Smart Card Should be NXP chip certified for best in class etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: Emergency Glass Break Unit etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: Recessed/Surface magnetic contact for Door position monitoring etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: MS Windows 2012 Server R2 x64, Intel i5 Xeon Quad Core processor, 8 GB RAM, 2TB HDD, 2GB Graphics Card. With CD/ DVD player, Mouse and Keyboard etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: 8 core multi-stranded Data Cable (as per actual) etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: 4 core multi-stranded Data Cable (as per actual) etc. all complete. y
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: 2 x 1.5 sq mm multi-stranded power Cable (as per actual) etc. all complete.
Supply, Installation, Testing & Commissioning of Access Control System: Control Room Equipments: Accessories for access control equipments, wiring and others etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: 12 to 48 Port Rack mount Sliding Fibre optic drawer (LIU),USE-Metal 19” pre-equipped fibre optic drawers, 4 cable entries,supplied,with screw fixing kit, 2 cable glands (Ø 13.5 and 16 mm), coiling system and splicing cassette. , Panel and optical ports marked on dedicated marking area, Sliding: end stop at a 30° angle for easier wiring, 12 SC Multi-mode Duplex, 24 LC Multi-mode Duplex, 24 ST Multi-mode, 12 SC Single-mode Duplex, 24 LC APC Single-mode Duplex.
Supply, Installation, Testing & Commissioning of Video Wall Panel: 46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA.Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 802.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz.
Supply, Installation, Testing & Commissioning of IP CCTV Camera: Panoramic camera: 12MP with active pixel 3008 x 3008,1/2.3” progressive scan CMOS, 360 deg view, 1.6mm lens,IR Range 10meter, MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, Built-in microphone.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Camera: Multisensor Camera, 1/2.5" progressive scan, 4 x 8MP, 4 X 3840X2160 resolution, 4/ 5.2/ 2.8 mm lens,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of Video Wall Panel:46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA. Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 80 2.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz.
Supply, Installation, Testing & Commissioning of 6 Core - Optic fibre cable OS 1/OS 2 - Unitube Single Jacket Armor Lite,Lan backbones,Outdoor direct burial,Tunnels, This specification covers an optical cable with 2 - 24 optical fibres of UNI tube construction. The cable is armoured thus making it suitable for installation outdoors in harsh environments. The armouring does also make the cable rodent proof, Standards-ISO 11801 2nd edition, EN 50173-1:2002, IEC 60794-1,
Supply, Installation, Testing & Commissioning of Accessories for IP55 Outdoor Junction Box For Field Devices. JB must be of appropriate size to house different components as per CCTV system design confirming to tender specifications. The junction box shall be provided with external earthing lugs 5 socket Power terminaton with MCB or More Proper/Steady fixing along with Pole (either through RCC base or weather proof clamping with pole) as per site requirements is under bidder’s scope etc. all complete.
DOCTOR RES.
Supply, Installation, Testing & Commissioning of IP CCTV Dome Camera : High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 4 to 9mm,IR Support 30meter or better, 1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),motion detection and camera sabotage,Built in Micorphone ,Remote zoom and focus,Onvif S,G,T supported IP66 & IK10 Housing, POE powered, should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Bullet Camera: High quality imaging with 2 MP resolution, 120 dB true WDR technology,Motorized varifocal lens 11 to 29 mm,P-iris Technology,IR Support upto 60m,1920 × 1080@30 fps,MicroSD/SDHC/SDXC card (256 GB),human and vehicle targets classifiation with deep learning deep learning Artifical intelligence,Line crossing, Loitering, object enter in area, leave area,stopped vehicle, Directional violation, support Onvif S,G,T, M, supported IP67 & IK10 , NEMA 4X, Housing should have UL, CE & FCC Certified etc
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments, support 128 channel, Intel® Xeon® Silver 4210, 16GB RAM, Windows 10 supported, RAID 5 support, OS 2x SSD 480 GB ( RAID 1), NVIDIA Quadro P620 (2 GB memory), 450Mbps, IPv4 and IPv6,2 x 1 Gigabit Ethernet (1000 Base-T), minimum 8 HDD Slots
Supply installation Testing and Commissioning of Video Management Software and all Cameras shall be of same make for seamless Integration *web based client allows viewing and exporting video without installing any software and server client Architechture. *Imports users and roles from existing LDAP servers to reduce administrative overhead,and enables single sign-on (SSO) *Capable of listening for ASCII commands *Check on VMS and camera health using SNMP *Supports IPv4 and IPv6 cameras *Enables and supports Risk Management Framework (RMF),incorporates FIPS 140-3 validated cryptographic modules *TLS-based encryption over HTTPS *VMS Shall be able to Reduce Frame rate & FPS on recorded video to increase stoarge capacity * Bidder to consider liscences as per mentioned BOQ with 25% extra
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring workstation System: Intel Core i5 64-bit CPU with Intel HD Graphics or better, 16GB Memory, Windows 10 Pro,Current version of Google Chrome or Microsoft Edge Approved Makes:HP/Dell/Lenovo
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: LIU to Media converter connectivity etc. all complete.
Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: 12 to 48 Port Rack mount Sliding Fibre optic drawer (LIU),USE-Metal 19” pre-equipped fibre optic drawers, 4 cable entries,supplied,with screw fixing kit, 2 cable glands (Ø 13.5 and 16 mm), coiling system and splicing cassette. , Panel and optical ports marked on dedicated marking area, Sliding: end stop at a 30° angle for easier wiring, 12 SC Multi-mode Duplex, 24 LC Multi-mode Duplex, 24 ST Multi-mode, 12 SC Single-mode Duplex, 24 LC APC Single-mode Duplex.
Supply, Installation, Testing & Commissioning of Video Wall Panel: 46 Inch LCD TV WALL 46",1080P,500cd/㎡,bezel width:3.5mm,Input: VGA/DVI/DP/HDMI, output: DP/HDMI, support 4K input and loop up to 30 screens with HDMI/DP interface, support VESA.Decoder Decoding 8-ch 12MP or 64-ch 1080P, HDMI/BNC output, H.265/H.264+/H.264, max. 16 division, 2*4 video wall control, 1 PC signal input via VGA or DVI
Supply, Installation, Testing & Commissioning of Video Wall Mount for 2x2 Configuration, Cross Folding Video Wall Mount, push and pull up technology, Press the panel it will come out appox 8" and push back it will be lock automatically Professional video wall mount designed ultimate in versatility and universal compatibility with load capacity of 45kg/99lbs and max. VESA 800x400 hole pattern can extends out 202mm from wall by a press with pop-out function and places 60mm to wall when retracted with quick lock mechanism. with all require accessories etc. all complete.
Supply, Installation, Testing & Commissioning of Control Room Equipments: 42U RACK IT INDUSTRY STANDARD RACK with ventilation, sliding shelves, power strips etc. all complete.
Supply, Installation, Testing & Commissioning of Control Room Equipments: 6U RACK IT INDUSTRY STANDARD RACK with ventilation, sliding shelves, power strips etc. all complete.
Supply, Installation, Testing & Commissioning of Control Room Equipments: 5 KVA, ONLINE UPS etc. all complete.
Supply, Installation, Testing & Commissioning of Control Room Equipments 650 VA, ONLINE UPS etc. all complete.
Supply, Installation, Testing & Commissioning of L2, Smart Managed, 24 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 370W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control, Visualized Topology Management, Network Health Monitor, Real-Time Alarm Push and Video Control and Preview
Supply, Installation, Testing & Commissioning of L2, Unmanaged, 24 Gigabit POE ports, 2 Gigabit SFP uplink port, 802.3af/at, PoE power budget 225w
Supplly Installation Testing & Commissioning of U/ UTP, Cat 6 A Cable, USE-Cable for high-speed VDI transmission networks. 802.3 bt PoE++ applications compatible according to installation standards ISO/IEC 14763-2 (final draft) and EN 50174-2 : 2018, Insulation-PE Ǿ 1.03±0.1 mm, Conductor-45.3 dB per 100m, Min Next (dB)-33.8, ACRF (dB/100m)-13.8, ACRF (dB/100m)-15.2, PS NEXT (dB)-31.8, Performance characteristics to be provided along with bid for CAT6A @500 MHz-The cable NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT test result should meet & exceed the performance requirement as per as per ANSI/TIA 568.2-D, ISO/IEC 11801, & EN50173, IEC 61156-5, IEC 60332-1-2, IEC 61034-2, IEC 60754, IEEE 802.3bt : PoE++, Type as per ANSI/TIA 568.2-D at 500 to 600 MHz. (305 Mtrs Roll)
Supply, Installation, Testing & Commissioning of PVC Conduit diameter 25mm (as per actual) etc. all complete.
Supply, Installation, Testing and Commissioning of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits or better, Video wall mode should be available, contrast ratio : 1200:1, OPS slot,should have 178 degrees viewing angle complete with mounting and accessories.
Supply, Installation, Testing & Commissioning of Server Unit with Hardware: MS Windows 10 Professional, Intel Core i7 or better Pocessor, 8 GB RAM, 1 TB HDD, 2GB Graphics Card. With CD/ DVD player, Mouse and Keyboard with Programming & GUI Making etc. all complete.
Supply, Installation, Testing & Commissioning of Digital Signage Player with 4K and Full HD single video decoding, mainstream HTML5 performance and simultaneous playback from local, networked and streaming sources. Includes the standard I/O package of gigabit Ethernet, GPIO, analog and digital audio. Video Codecs for 4K content: H.265/H.264, Video Containers for 4K H.265/H.264 content: .ts, .mov, .mp4 complete with signage software etc as required.
Supply, Installation, Testing & Commissioning of Cables/Connectors with Patch Panel Termination Cables Audio / Video Cables & Connectors with Accesssories etc. all complete.
Supply, Installation, Testing and Commissioning of 24-port 1000base-T Gigabit PoE+ Smart Managed Switch. . Should have Network Protocol and Standards Compatibility IEEE 802.3 Ethernet. IEEE 802.3i 10BASE-T.
Supply, Installation, Testing & Commissioning of Digital Cat 6 A STP Cable Termination Cables with Accesssories all complete. etc. all complete. (305 Mtrs Roll)
DIGITAL INTEGRATED PUBLIC ADDRESS AND VOICE ALARM SYSTEM
SITC of 8 zone Digital Voice Evacuation Master controller with built in 500watt Amplifier. The System shall meet the standards of BS EN54 - 32 & EN 60849. The System Shall have Built in 500W Class-D Amplifier and it should be capable for the EVAC, Paging, PA and BGM functions. The Controller shall have SD card option to store the EVAC and Alert Voice Message. The Controller shall have Speaker line supervision record out and amplifier auto changeover. The Controller shall have following features: Separate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault, ALERT & Fireman mic, Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD<1%, Frequency response 80Hz - 20kHz, Up to 1000 Record files, 100V Class-AB Speaker Output.
SITC of 8 zone Digital Voice Evacuation Router with built in Amplifier. The System shall meet the standards of BS EN54 - 32 & EN 60849. The System Shall have Built in 500W Class-D Amplifier and it should be capable for the EVAC, Paging, PA and BGM functions. The router shall have Speaker line supervision record out and amplifier auto changeover. The Controller shall have following features: Separate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault, ALERT & Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD<1%, Frequency response 80Hz - 20kHz, and 100V Class-AB Speaker Output.
Supply Installation Testing & Commissioning of 250W RMS Four Channel Class-D Digital Power Amplifier with Switch power technology for power electricity saving. Amplifier shall have Following Features: 250W RMS per Channel, Amplifier Output 100V, Short Circuit, Power, Tempreature, Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency Response 20Hz - 20kHz, AC & DC Fuse, SNR >80dB.
Supply Installation Testing & Commissioning of 500W RMS Four Channel Class-D Digital Power Amplifier with Switch power technology for power electricity saving. Amplifier shall have Following Features: 500W RMS per Channel, Amplifier Output 100V, Short Circuit, Power, Tempreature, Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency Response 20Hz - 20kHz, AC & DC Fuse, SNR >80dB.
SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 6 / 3/ 1.5 at 100v, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB with Fire Dome complete with necessary mounting hardware & accessories.
SITC of 10W wall mount speakers with following features:-component 6.5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840), SPL@1m/1W=88dB, Peak SPL 96dB complete with necessary mounting hardware & accessories.
SITC of 15W Weatherproof horn speakers with following features:- Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 15/7.5W, Effective frequency range 250-18kHz (BS6840), SPL@1m/1W=102dB, Peak SPL 112dB complete with necessary mounting hardware & accessories.
Supply, Installation, Testing & Commissioning of 16 AWG Copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables complete etc. all complete
Supply, Installation, Testing & Commissioning of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete. (305 Mtrs Roll)
Supply, Installation, Testing & Commissioning of Layer 2 24 Port PoE Access Switches with switching capaticy of 248 Gbps, forwarding performance 184 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4x 10G/25G SFP+/SFP28 uplink ports . Should support min 4GB internal DRAM, 8GB internal Flash memory, 32K MAC address. Switch should support stack of 12 switches and aggreated stacking bandwith of 1.2Tbps. Switch support layer3 features (OSPF,BGP,VRRP 3, VRRP-E,RIPng,VRF,ECMP,GRE,PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) ) . Switch OS series should be NDPP certified . Switch should be TAA compliant.Switch should be supplied with 3 year OEM remote support and warranty.ll WiFi and Switches, Tranceivers should be from the same OEM. . Approved Makes:Ruckus/Juniper/Cisco
SANITARY INSTALLATIONS
Providing , Fixing, testing and commissioning of CP Brass 160mm long Shower Arm with wall flange and pressure adjustable Shower Rose complete with all accessories as required and making good the walls wherever required. ( MAKE-JAQUAR -Model No- SHA-477 FOR SHOWER ARM & JAQUAR MAKE FOR HEAD SHOWER OHS-1989 or EQUIVALENT.)
Providing and fixing 6mm thick beveled edge glass mirror with side polished complete including fixing over marine plywood frame work with silicon at all levels & height including fixing of molded ,screw and silicon etc. incl labors, tools, scaffolding at all heights as per Direction of EIC .
Supplying, storing, handling, shifting, installation, testing and commissioning of CP flxible hose, spray, wall flange etc. complete. (1) Jaquar make (Model -ALD-573) . (2)Hindware Make(Model-F1600002) Rs.=1570. (3) Parryware Make(Model-T9941A1)Rs.=1600
Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.
Providing and fixing CP brass single lever low flow wall mounted Sink mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges with complete including cutting and making good the walls where required.(1) Jaquar make (Model -LYR-38165). (2)Hindware Make(Model-F230014) Rs.=5640. (3) Parryware Make(Model-T1635A1)
Providing & Fixing of Grab Bar size 300mm long in handicap toilet complete as required.Makes & Model No.Jaquar AKP-35701P.
Providing & fixing glass urinal partition of Height: 900mm,Width: 450mm &Frosted Safety Glass: 8 mm with fixed with expandable anchor fasteners with C.P. brass bolts and washers, embedded in wall with anchor and set in cement concrete complete including cutting and making good the walls wherever required .(1) (MAKE-JAGUAR: MODEL NO-Model No. 1810-US, 1810-UC.)(2)Hindware Make(Model-61001) Rs.=3500.
Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. Jaquar make CAT No- AKP-35791P (2)Hindware Make(Model-Robe Hook F870007)
Providing & fixing brass ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete:in all respects.
15 mm dia
Fixing of Storage type water heater/ Geyser with required accessories like 15 mm CP angle valve on inlet , heavy duty reinforced flexible PVC connector for cold water line and flexible CP brass connector with CP checkout for hot water line, CPVC line connection, MS bracket with two coats of enamel paint, anchor fastners etc to hang the units, providing and fixing of 16 A 3 Pin plug of Anchor make, etc complete as required.
Capacity 25 Liters
DRAINAGE INSTALLATIONS
Providing and fixing sound-insulated mineral reinforced polypropylene pipe & fitting drainage system. Conforming to BS EN1451 standard. Marking on pipe and fittings are as per EN1451 standard. Density of pipe is greater than 1.20g/cm³ and the pipe connections are leak-proof up to an internal excess water pressure of 1.0 bar. Coefficient of linear expansion should not more than 0.09 mm/m x K Offering sound levels of not more than 17 dB as per DIN4109 at a flow rate of4 Ltr/sec. Bracketing shall comply with the manufacturer’s recommendation to ensure it does not compromise the acoustic performance of the product.
Providing and fixing sound-insulated mineral reinforced polypropylene pipe & fitting drainage system. Conforming to BS EN1451 standard. Marking on pipe and fittings are as per EN1451 standard. Density of pipe is greater than 1.20g/cm³ and the pipe connections are leak-proof up to an internal excess water pressure of 1.0 bar. Coefficient of linear expansion should not more than 0.09 mm/m x K Offering sound levels of not more than 17 dB as per DIN4109 at a flow rate of4 Ltr/sec. Bracketing shall comply with the manufacturer’s recommendation to ensure it does not compromise the acoustic performance of the product.
Tee 90degree 110 mm dia.
Tee 45degree 110 mm dia.
Elbow 45degree 110 mm dia.
Providing and fixing terminal guard 100mm standard PP
Providing and fixing terminal guard 100mm standard PP
Providing and fixing PP white Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections (McAlpine, UK) or equivalent.
110 mm inlet & 110 mm outlet.
Providing and fixing sound-insulated mineral reinforced polypropylene pipe & fitting drainage system. Conforming to BS EN1451 standard. Marking on pipe and fittings are as per EN1451 standard. Density of pipe is greater than 1.20g/cm³ and the pipe connections are leak-proof up to an internal excess water pressure of 1.0 bar. Coefficient of linear expansion should not more than 0.09 mm/m x K Offering sound levels of not more than 17 dB as per DIN4109 at a flow rate of4 Ltr/sec. Bracketing shall comply with the manufacturer’s recommendation to ensure it does not compromise the acoustic performance of the product.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
160 mm bend
Shoe (Plain)
160 mm Shoe
Providing and fixing floor drain (FD) with 50mm outlet and 100/110 mm inlet.
Providing and fixing clean out pipe (door piece) of POLO KAL NG or equivalent for cleaning.
with 100 mm dia. Pipe
Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 2.5 T, suitable for car parking, basement, Pump room, Parking Area ) THERMO DRAIN or Equivalent.
377mm wide and 30mm thick
WATER SUPPLY INSTALLATIONS
Providing and fixing stainless steel pipes conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 110 degree centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -20 to 110 degree Centigrade including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete.
15 mm dia, Outer Dia pipe
22 mm dia, Outer Dia pipe
28 mm dia, Outer Dia pipe
35 mm dia, Outer Dia pipe
42 mm dia, Outer Dia pipe
54 mm dia, Outer Dia pipe
65 mm dia, Outer Dia pipe
Providing, fixing, testing and commissioning of motorised butterfly valve/ball valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in overhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc.
40 mm dia
50 mm dia
65 mm dia
Providing and Fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
15 mm dia
20 mm dia
25 mm dia
32 mm dia
40 mm dia
50 mm dia
Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.)
40mm nominal outer dia. Pipes.
Providing and fixing insulation with thermaflex elastomeric nitrile rubber sheets complete with plastering of 20 mm thick insulation with thermaflex elastomeric nitrile rubber sheets for hot water & cold water pipes exposed to sun complete with plastering.
15 mm dia, nominal
20 mm dia, nominal
25 mm dia, nominal
32 mm dia, nominal
40 mm dia, nominal
50 mm dia, nominal
65 mm dia, nominal
80 mm dia, nominal
Providing and fixing brass automatic air vent at the top of each riser.
25mm diameter
Providing and fixing M.S. puddle flanges fabricated out of 6 mm thick M.S. plate of size 200 x 200mm plus dia of pipe of 750 mm long pipe pieces to R.C.C. water tanks / R.C.C. walls. The entire fitting shall be hot dipped galvanised.
150mm dia
100mm dia
80mm dia
65mm dia
50mm dia
40 mm dia
32 mm dia
25mm dia
Providing & Fixing water purifier cum water cooler made of stainless steel having storage capacity of 40 liter & cooling capacity 40 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge .
EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS
Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
400 mm diameter
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design.
300 mm diameter
400 mm diameter
Constructing 2x1x1 mtr (effective Depth). inernal dimension brick masonry oil & grease trap with Ist class bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement inside and rough plaster on outside, 2 Nos. 150 mm dia S W Tees, 3 Nos. 600x600 mm size SFRC manhole cover with frame, necessary baffle walls, 100 mm dia 2100 mm high SCI vent pipe with cowl, complete as per drawing, including excavation refilling and disposal of surplus earth.
TUBEWELL
Supply, Lowering, installation & testing of submersible pumping set with 10 HP motor 4 stage pump suitable for 20/26/30/38/40/45/50 m3 hr. at 42/38/36/32/29/25/20 mtr. Head respectively. With Three Phase. (Model: 273/4)
Providing & fixing cable 3CX 6 sq.mm. From submersible pump to panel board of Aluminium cable.
Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.
PUMPS & ALLIED WORKS
Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.
Filter Feed Pump ( Dom. Water)
Set of Three Pumps( 2 Working+ 1 Standby)
Capacity 400 LPM
Head 25 M.
HP 4.0 HP ( Approx.).
STP MakeUp Pump
Set of Two Pumps( 2 Working+ 1 Standby)
Capacity 350.0 LPM
Head 40 M.
HP 5.0 HP ( Approx.).
Supply, Installation, Testing And Commissioning of Compact Self Contained Skid Mounted Hydropneumatic System As Follows:(A) Vertical, In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and SS-316 shaft, CI base & head CI material shouldbe CED coated TEFC motor (with mechanical seal) with single VFD suitable for automatic operation and delivering the specified discharge at the specified head,VFD should be of class IP-20 with pressure vessel, pressure vessel should be matching of specied requirement of pump.(B) b. External Pump mounted or wall mounted microprocessor PID controller and frequency inverter integrated in a single body or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equiped with dry running protection. ( C) Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor) (D)Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete.(E)Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete(F) Accessories like pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)(G) GI suction and delivery header with flanges for inlet connection, common outlet header with flanges for outlet connections as required, and inter connecting piping with flexible connections, eccentric type reducers etc. all necessary indigenous accessories like valves, strainer & NRV as required to complete the installation.
Domestic Water Transfer Pumps(For Hospital & College Blocks)
Set of Three Pumps( 2 Working+ 1 Standby)
Capacity 200.0 LPM
Head 90 M
HP 7.5 HP ( Approx.).
Domestic Water Transfer Pumps(For Residential blocks)
Set of Three Pumps( 2 Working+ 1 Standby)
Capacity 200.0 LPM
Head 90 M
HP 10 HP ( Approx.).
Hot Water Supply Pump (At Hospital Terrace)
Set of Two Pumps( 1 Working+ 1 Standby)
Capacity 100.0 LPM
Head 40 M
HP 2.5 HP ( Approx.).
Domestic Water booster Pumps at Terrace(For Hospital)
Set of Three Pumps( 2 Working+ 1 Standby)
Capacity 75.0 LPM
Head 35 M
HP 2.5 HP ( Approx.).
Domestic Water booster Pumps at Terrace(For Hostel &Residential blocks)
Set of Three Pumps( 2 Working+ 1 Standby)
Capacity 25.0 LPM
Head 35 M
HP 2.5 HP ( Approx.).
Supply, installing, testing and commissining of submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphram and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, dry running Protection complete in all respects. Complete With media saturation arrangement twin lobe rotary air blower with motor , base frame , pulleys , v belts, drives guard suction pipe , accessories, painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.
(Pumps shall be installed in a set of two pumps One working and One standby)
Water Supply Pump Room & basement drainage
(Pumps to be suitable to handle solids upto 12 mm size)
Capacity - 5.0 LPS (Each)
Head - 15 M
H.P. - 2.0 HP Approx.
Sewerage Sump Pump at STP area
(Pumps to be suitable to handle solids upto 40 mm size)
Capacity - 5.0 LPS (Each)
Head - 15 M
H.P. - 2.0 HP Approx.
Providing and fixing stainless steel pipes conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 110 degree centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -20 to 110 degree Centigrade including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete.
50mm dia
65mm dia
80mm dia
100mm dia
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 8 Kg/Sqcm.
50mm dia
65mm dia
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.
3 core 10 sq.mm
3 core 6 sq.mm
3 core 1.5 sq.mm
Supply and making End termination with brass Single/ Double compression gland including providing and crimping of aluminum/copper solderless lugs/ferrules for XLPE/PVC insulated armoured power aluminum/copper conductor cables 1.1 KV grade of following sizes:
4C/3C/2C x 4/6/2.5 sq.mm.
Supplying, installing, testing and commissioning controllers with low volatage relays, stainless steel probes and PVC shroud wiring from tank top to probles of required.
For Filter Feed Pump:
To start pump when water level is low in U.G. tank (Domestic water) and shut off pump when U.G. tank (Domestic) is full. Also to stop when water level is low in raw water underground tank.
For Sump Pumps:
To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.
ELECTRICAL PANEL WORKS
MCC –1 for Plumbing system
Incoming
100 amps TPN MCCB with the following accessories:
c. Phase indicating lamps protected by 2 amp SP MCB 3 Set
Bus Bar
125 amps TPN aluminium bus bar with heat shrinkable insulation sleeves.
Outgoings
Complete in all respect as above
Notes :
a. All MCCBs shall be of 35 KA breaking capacity and suitable for motor duty application.
b. Provision shall be made for providing potential free contacts to all pumps starters for connection to BAS
c. Provision shall be made to ensure system protection from dry running of the pump
MCC - 1 For Plumbing System as described above.
WATER TREATMENT EQUIPMENTS
Supply Installation,Testing & Commissioning of vertical self supporting Dual Media Filter fabricated from MS sheet as per IS: 2825, (minimum thickness of shell & Dish ends as per manufacturer design) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.
For Domestic Water Supply
Capacity- 48000 LPH
Filtration rate- 14000 LPH/M2
Filter Dia approx. - 1750 mm (Approx.)
Working pressure: 3.0 Kg/sq cm.
Test pressure : 4. 5 Kg/sq cm
Supply Installation,Testing & Commissioning of vertical self supporting Activated Carbon Filter fabricated from MS sheet as per IS: 2825, (minimum thickness of shell & Dish ends as per manufacturer design) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.
For Domestic Water Supply
Capacity- 48000 LPH
Filtration rate- 14000 LPH/M2
Filter Dia approx. - 1750 mm
Working pressure: 3.0 Kg/sq cm.
Test pressure : 4. 5 Kg/sq cm
Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects.
Chlorination of Domestic Water
SOLAR WATER HEATERS
AIR COOLED HEAT PUMP FOR GENERATING HOT WATER
Supply , installation , testing & commissioning of Micro Processor Controlled aircooled reversible scroll Heat pump delivering actual capacity as per the following parameters duly installed at site. The chiller should be complete with single/multiple hermatic scroll compressors , Four way reversing valve, Electronic Expansion Valve, defrosting cycle, Liquid reciever, Copper tube/ aluminum fins air cooled heat exchanger with Axial fans with IP54 protection, braze plate type( SS316) primary heat exchanger, anitvibration rubber mounts with factory assembled with required fittings, valves, piping, Electrical panel mounted on the chiller including the disconnect switch suitable for 50 Hz, 3 phase 415 volts,ac supply. The vibration isolators should be shipped alongwith chillers. Heat Pump should be capable of generating Hot Water upto 65ºC. The heatpump should be capable for operation from -10 Deg C to 47 Deg C .
Refrigerant circuit to include liquid injection of refrigerant for higher temperature application liquid line solenoid valve, drier filter with replaceable solid cartridge, liquid line sight glass, electronic thermostatic valve, high pressure safety valve, high & lower pressure transducers, high and low pressure switches, liquid receiver etc. The heat pump should be suitable for operation on Environment friendly refrigerant R407c/ R410a and should come factory charged with refrigerant
Heating capacity = 50 kW Actual at below mentioned conditions
Hot water inlet temp.= 15 Deg C
Hot water outlet temp.= 65 Deg C
Design ambient temp. = 7 Deg C
Refrigerant : R-407C
COP ( Actual) : Min 2.9 ( with Fans)
Optional : RS-485 serial card for Modbus BMS
SOLAR PANELS
Supply, installation, testing & commissioning of Solar Water Heating System of 25 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 2500 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 25 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 20 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 2000 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 20 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 18 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 1800 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 18 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 10 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 1000 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 10 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 6 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 600 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 6 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 4 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 400 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 4 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
Supply, installation, testing & commissioning of Solar Water Heating System of 2 NOS ISI Marked Solar Flat Plate Collectors of size 2080mm X 1070mm X 100mm,, Laser welded . with necessary Stands, Support etc. with 200 Ltrs capacity SS -304 hot water storage tank of thickness 0.8 mm duly insulated with 50 mm thick PUFF insulation & 24 SWG Aluminium Cladding, with Heat Exchanger of suitable surface area, with necessary makeup tank, with 2 KWH Electrical backup for cloudy / foggy days, with necessary piping with solar panels & solar hot water tank, with one No. temperature Gauge, with 01 Nos. Ball valves, to produced hot water up to 60 degree C on clear sunny days. (MNRE Approved)
EXTERNAL WATER SUPPLY & IRRIGATION SYSTEM
Providing and fixing stainless steel pipes conforming to EN 10312 standard complete with press type fittings for Hot and cold water supply, RO & domestic water supply system capable to withstand temperature upto 110 degree centigrade and pressure upto 16 bars made from 316 L grade-Material no. 1.4404 (X2CrNiMo17-12-2) of annealed and pickled stainless steel sheet, with ends deburred at 900 and with length of 3 meters. Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under water tested under 10kgs. Fittings also conforming to EN 10312 standard in 316 L stainless steel grade of approved make in accordance with DVGW regulation such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-ring of EPDM material which can withstand temperature upto -20 to 110 degree Centigrade including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be avoided by inserting approved type of filler material as per project manager’s/consultant requirement. Flanges, clamps with hanger at a spacing of 2 m centre to centre min or as required etc. necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. (External)
35 mm dia, Outer Dia pipe
42 mm dia, Outer Dia pipe
54 mm dia, Outer Dia pipe
65 mm dia, Outer Dia pipe
80 mm dia, Outer Dia pipe
100 mm dia, Outer Dia pipe
Providing, laying, Jointing, Testing and commissioning of UPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For garden hydrants).
Providing and fixing motorised butterfly valve, IP- 67, with float type sensors suitable for 240 volts with working pressure rating of not less than 5kg/cm2, torque of motor should be capable to open and close valve at 5 kg/sq.cm pressure, with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including 03 Nos butterfly valves along with byepass piping, necessary cables, conduits, upto junction box ( upto 6 mt qty approx) etc. complete.
50 mm dia
SEWAGE TREATMENT PLANT
Sewage Treatment Plant 460 kld
Design, Supplying, Installing, Testing & Commissioning of Sewage Treatment Plant capacity 460 KLD. The plant proposed shall be 460 kld with a main pump room. The plant is proposed to be installed in the Under-ground from the pump room itself for future maintenance. Opening shall be provided on above for this purpose, for the following :
Nature of effluent - Domestic Sewage from Toilet use and kitchen waste,washing waste water.
Daily average flow - 460 Cum / Day
BOD5 - upto 250-450 Mg/L
S. Solids - 250 - 400 Mg/L
COD - upto 450-600 Mg/L
Oil & Grease - 50 Mg / L
Effluent discharge standard after treatment
BOD5 - Less than 30 Mg/L
S. Solids - Less than 10 Mg/L
COD - Less than 100 Mg/L
Oil & Grease - Nil
Sewage treatment plant shall include the following items:
Screen Chamber
Sewage equalization tank/sump
MBBR(FAB) Tanks
Tube Settler
Clear Water tank
Softener Feed PUMPS
Soft Water tank
Sludge Holding Tank
Plant Room Sump
Filtration through MGF & ACF,softner
Air Blowers, Pumps & equipment,filter press.
Piping, valves etc
Electrical Panel & Cabling
Common plant room adjacent to STP.
All piping, valves & level indicator/controller etc. within plant room.
Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated Screen with suitable lifting arrangement (size 800 mm wide x 1200 mm high approx)
Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxiliary NO/NC contacts.
Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned components and additional components such as inserts, puddle flanges, vent pipes etc. if so required for the complete work.
Supply, installation, testing & commissioning of non clogging type pumps, having C.I. casing & CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty.
Submersible waste water Transfer Pumps (2 Nos. - One working & one standby)
(Solid handling Cap. 32 mm)
Flow rate (each) = 23 m3 / hr
Head = 15 Mtr
Plant room sump pump 2 Nos (1 working + 1 standby) .
Flow rate = 15 cum/hr
Head = 15 Mtr
(Solid handling size for this pump shall be 28 mm).
Mono block centrifugal Sludge Transfer Pumps (2 Nos. - One working & one stand by )
(Solid handling cap. 8 mm)
Flow rate (each) = 15 m3 / hr
Head = 8-10 Mtr
Cost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)
Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.
Air diffusion system shall include the following:
Twin type rotary air blowers (one working & one standby) capable of delivering 455 cum/hr (each) of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply
Air piping shall be comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good.
Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired
Fine/corse bubble diffusers
For equalization tank -
For sludge holding tank -
MBBR Reactor tank.
Air dispersion system shall be provided for Equalization Tank, Sludge holding Tank and MBBR reactor Tank.
Providing and fixing all piping (as described below) and isolation control valves for making the system complete.
SS 304 :Submerged air piping
MS Epoxy : Air piping
PVC piping :Pumped effluent & tank overflow pipe line
Supply, installation, testing and commissioning of Fludised Media for Aeration Tank (FAB Media) and tube media for seconry tube setteling tank
Supply, installation, testing and commissioning of Bowl type Centfifuge 2-3m3/hr Make Hiller with screw feed pumps for required capacity (1Working+1Standby), with interconnecting piping and poly dosing system all complete.
Supplying, installing, testing & commissioning of centrifugal vertical / horizontal water pumps C.I. Body, bronze impeller with mechanical seal along with motor. Pressure gauge with isolation cock, NRV, Isolation valve on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.
Filter Feed Pumps
No. of Pumps (1 working + 1 standby)
Capacity - 500 LPM
Head - 20 M
Eff. - Class I
Softner Feed Pumps
No. of Pumps (1 working + 1 standby)
Capacity - 250 LPM
Head - 20 M
Eff. - Class I
Flushing Water Transfer Pump
Set of two pumps (1 Working + 1 Standby)
Capacity - 400 LPM
Head - 80 Mtr.
Eff. - Class I
Garden Irrigation Pumps
Set of two pumps (1 Working + 1 Standby)
Capacity - 100 LPM
Head - 50 Mtr.
Eff. - Class I
Soft Water Transfer Pump
Set of two pumps (1 Working + 1 Standby)
Capacity - 250 LPM
Head - 50 Mtr.
Eff. - Class I
Operation of pump shall be based on level controller proposed to be installed in tank as per site location. The contractor to ascertain the Head required for pumps as per site conditions and provide accordingly.
Supplying, installing, testing and commissioning of FRP vessel filter with frontal piping and associated valves and accessories. Filter shall be suitable for a minimum working pressure of 3.0 kg / cm2 and shall include media, standard fittings like pressure tight manholes, initial charge of media, raw water distributor, under drain system, face piping, pressure gauges etc.,
The Multi-grade filter shall be constructed of FRP material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.
Flow rate : 30 cum/hr
Filteration Velocity - 17500 Liter /sqm /hr
Filter Diameter : 1350 Dia , Height 1800 mm
The Activated Carbon filter shall be constructed of FRP material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard.The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. The filter shall be provide with manhole cover, hand hole, flanged outlet for piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The filter shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.
Flow rate : 30 cum/hr
Filteration Velocity - 17500 Liter /sqm /hr
Filter Diameter : 1350 Dia , Height 1800 mm
Medium pressure synchronous motor type chemical dosing pump with noryl Plastic body and PVC parts, dispensing valves, foot valves, relief valves, mounting plate, chemical tank of 250 litre capacity complete.
Capacity 0-60 LPH at pressure head of 40 MWC.
The Softner shall be constructed of FRP material with inner shell of integrated polyethylene, polypropylene and other material as per manufacturer's standard. The inter distribution system and the underbed draw off system shall be of Hub & Lateral type of polypropylene material. with all piping/valve connection and adequate tripod with skid self supporting structure for making the installation completed. The softener shall also be provided with vacuums breaking connection / accessories to avoid any collapse of internal lining. All filters shall be provided with lifting lugs and making the installation completed as required.With SS Agitatorr.(softner for cooling tower water)
Flow Rate :15 cum/hr
out put water hardnes- zero
Reg.time-8 hr.
(Incoming Hardness 300mg/lit (Approx))
Supply installation, testing and commissioning MS rubber lined brine tank(2000 lit. cap.) fabricated with 5 mm thick MS plate and lined with 4 mm thick rubber duly tested by spark test and certified for proper lining including brine delivery pipes and inclusive of stirrer etc., complete in all respect.
Supply installation, testing and commissioning UV System cap. 30 cum / hour with required no of UV Lamp and other required accessories complete in all respect.
Electrical Installation
Motor Control Centre
Incoming
100 amps TPN MCCB with the following accessories:
Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets
Bus Bar
200 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves.
Spare MCB’s of following capacities:
32 amps TPN MCB’s 3 Nos.
Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthing for all equipment shall also included
Notes :-
All MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application.
All motor starters shall be provided with Automatic level controller
DOL starters shall be used for motors below 7.5 HP and Star-Delta Starters for other motors .
Provision shall be made for providing potential free contacts to all pumps starters
MCC for all STP equipments/pumps as described in sub head II
Maintenance Contract
To operate the entire STP under available load conditions for further period of 360 days on round the clock basis.
To provide services of contractors expert operating personal comprising of :
One Supervisor 4 hrs Three times a week.
One Plant operator one per shift in three shifts.
One helper for general maintenance and assistance. One per shift in three shifts.
Company’s back up services of senior engineers and experts for any major problems, general check up and maintenance and advise. Once a week for 2 hours minimum more or more if required.
All tools, equipment and testing devices to be provided by the contractor.
Consumable including lubricants and chemicals will be provided by Owners.
Total of Job as discribe above item
Supply, Fabrication, installation, testing and commisioning of effluent treatment plant with effluent handling capacity 15 m3 per day. The entire plant will be constructed in MS (FRP coated, min. 3 mm). The ETP shall be designed as water retaining structures, with necessary chemical dosing as required by the manufacturer's design. All the equipment, piping, pumps, air blowers and electrical panel to be housed in the ETP skid including M.S. puddle flange (Galvanised), inlet, outlet, overflow, vent, moving ladders & railing. The Plant shall be complete with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level and other controls. The cost will also include any consequential civil work including making foundations for the structure, pumps, blowers etc. It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge.
Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.
Daily average flow : 15 Cum/Day
BOD : 250 - 600 mg/l
S. Solids : 200 - 650 Mg/l
COD : 600 - 1200 mg/l
Oil & Grease : 50-140 mg/L
Effluent discharge standard after treatment :-
S. Solids : Less than 400 mg/l
COD : Less than 100 mg/l
Oil & Grease : Less than 5 mg/l
BOD : Less than 30 Mg/L
The ETP shall consist of following units but not limited to these unit as may be required by the manufacturer's design. MS PVC coated rungs in all tanks & Platform for maintenance etc. complete as required.
SS Perforated basket screen having provision for chain lifting arrangement etc. complete as required.
Collection cum Equalization tank including provision for aeration will be kept to avoid any smell problems in RCC Construction (Civil contractor's Scope)-10 Cum
Reaction tank with air diffuser and piping complete of adequate capacity. Fine air bubble jet diffuser with EPDM seat minimum number of diffusers to be provided as per manufacturer's recommendations in MS (FRP) Construction. Min. 2 Cum
Tube Settler tank, hopper bottom type with arrangement of deep well, baffle wall, scum removal arrangement, outlet launders with arrangement of lifting sludge from the bottom etc. complete as required in MS (FRP) Construction. Min. 3 Cum
Sludge Holding Tank with suitable sludge disposal pump of suitable capacity with provision of air diffusion, supernatant withdrawl arrangement in RCC Construction (Sludge Holding Tank in Civil contractor's Scope)
Providing and fixing all piping (as described below) and isolation control valves, non return valves etc. for making the system complete.
PVC piping (10kg/sqcm) - For all submerged waste water piping.
MS (C Class) - For all exposed air piping and flexible stainless steel pipe for submerged air piping.
GI (C class) for all other water piping.
Providing and fixing all instrumentation eg. Pressure guages, level controllers, sensors, rotametres for air, water etc. for making the system complete.
EQUALIZED WASTE WATER TRANSFER PUMPS :
Providing, installation, testing & commissioning of Horizontal / Vertical Submersible centrifugal pumps solid handling (min. 32 mm) pumps. The pumps shall be made of CI casing, CI Impellar, CI shaft & sleeve, Mechanical Seal are connected to a TEFC induction motor mounted on a common channel base frame with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design. Motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary piping, valves and other accessories and concrete foundation complete as required.
Capacity : 2.5 M3/hr @ Discharge Head 12 M head (1 Working + 1 Standby)
Mono block centrifugal Sludge Transfer Pumps (2 Nos. - One working & one standby
(Solid handling cap. 6 mm)
Flow rate (each) = 12 m3 / hr
Head = 8-10 Mtr
Providing and fixing lime/alum/polyelectrolyte dosing system consisting of ABS lime dosing pump (0-6 lph) with 100 l HDPE tanks including all piping from the dozer to the reaction tank etc. complete in all respects.
Supply, installing, testing & commissioning of Electrical system including Electrical Panel for all the above including all switchgear, cables, control wiring, multi function multimeters etc., also including the complete automation of the plant with level controllers and sensors in the HDPE and the MS tanks,control cabling, complete in all respects as required as per IS specifications.
Supply, installation, testing and commissioning of Filter Press of plate size 12"x 12" x 12 Nos plate with screw feed pumps for required capacity (1Working+1Standby), with interconnecting piping system all complete.( this item for ETP plant)
Contractor shall include all electrical and mechanical items as required to operate the system automatically and also include in his rates any other components/tanks/ equipment/ etc. required to complete the job as required. Only main power supply with the earthing to be ETP main control panel shall be provided by the owner through other agencies. The electrical panle will also include all the required NO/NC contacts, contactors etc. required to provide BMS connectivity.
Bypass arrangement shall be provided such that equalization tank pump can be used to pump out sewage to external manhole incase of maintenance of ETP.
Total of Job as Discribe above
ULTRA FILTRATION PLANT
Providing, installation, testing & commissioning of fully automatic Ultra Filtration System (UF) of capacity 30 m3/hr. The system should be complete with Feed Pump (1W+1SB), Back Wash Pump (1W+1SB), Cartidge Filter, UF Membrane with Housing, Flushing/Cleaning System, complete instrumentation for automation and monitoring Rotameter, pressure guage, interconnecting pipe, vales/solenoid valve, PLC base electrical panel with cabling all complete with all accessories. UF Membraine: GE/DOW
RO SYSTEM
Supplying, lifting at the terrace, assembly, erection, testing and commissioning of RO Water treatment system including centalised water cooler for cold water proand all its components of required size as per water test analysis to make the water suitable for drinking, complete including the following as mentioned below. The cost will include testing of permeate water sample from a CPCB approved test laboratory, generating and providing membrane analysis data form the licensed manufacturer's software etc.
Permeate water quantity = 1000 lit/hr. and Permeate water quantity = 500 lit/hr.
Minimum Recovery = 70%-75%
Raw Water Characteristics - As per Water Test Analysis Report of Shriram Test Laboratory to be got done by the supplier
Raw water Quality
Total Dissolved Solids: < 990 PPM
Turbidity : <1NTU
Chlorides : 205 ppm
Sulphates : 105 ppm
Treated Water Quality
Turbidity : <1NTU
Chlorides : < 10 ppm
Sulphates : < 5 ppm
TDS : < 50 ppm
SS Vertical centrifugal Raw Water Pump (1 Working + 1 Stand-by)
FRP Dual Media Filter
Activated Carbon Filter
Antiscalant Dosing System including pump chemical dosing pump, tanks etc.
Polypropylene Micron/cartridge Filter and SS housing
Stainless steel vertical multistage inline high pressure pump (1 Working) including dry running protection
Spirally wounded 6 nos. of RO Membranes
Composite FRP RO pressure tube/vessel
Automatic RO Module Cleaning System including chemical pump, cartridge filter, tanks etc.
pH correction system incl. chemical dosing pump, tanks etc.
Instrumentation including flow meters, digital TDS meter, digital pH meter, pressure gauges, low pressure switch, high pressure switch etc. complete.
SS-316L (8 kg/cm2) piping and ABS valves for low pressure and SS-316, schedule 10 piping and SS-316 L valves for high pressure piping in the plant.
Electrical panel including all starters, overload relays, single phase preventers, voltmeters, ammeters, MCB's, indicating lights, push buttons, rocker switches, incomers, auto-manual switches etc. complete.
All cabling , connections, terminations etc. required for the job.
Permeate water quantity = 1000 lit/hr. described above (a) to (m).
Permeate water quantity =500 lit/hr. described above (a) to (m).
ELECTRICAL WORK
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Primary point controlled by one MCB.
Same as item above but Secondary point. i.e. Points to be looped with Primary point.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 10/25 amps modular socket outlet and 10/25amps modular Type MCB, connection etc. as required.
Supplying and fixing 32 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections.
32 mm x 6 mm thick Cu flat
50 mm x 6 m thick GI flat
50 mm x 6 m thick GI flat
Supply of Copper Cables
Supplying & laying with Cable end termination of following 1100 volt grade PVC insulated sheathed copper conductor armoured cable as per specification in existing trenches, cable trays ducts over bed of sand, clamped includes anchor fastners to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.
4 Core 6 Sq.mm
3 Core 4 Sq.mm
1C X 150 sqmm Cu flexible(Unarmoured) cable
1C X 25 sqmm Cu flexible(Unarmoured) cable
1C X 6 sqmm Cu flexible(Unarmoured) cable
HT/LT CONTROL CABLES
Supplying and laying of following 1100 volts grade PVC insulated sheathed copper conductor armoured control cables in existing trenches cables trays, clamped on wall with suitable saddles, fixing bolts, including testing and commissioning.
12 Core 2.5 sq mm PVC insulated copper conductor armoured control cables
7 Core 2.5 sq mm PVC insulated copper conductor armoured control cables
Cable end termination of the following PVC insulated sheathed aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of crimping lugs. Double compression glands, cable sockets etc as required.
12 Core 2.5 sq.mm Control cable
7 Core 2.5 sq.mm Control cable
SITC of 1x36W(Nominal) LED Surface mounted LED Fixture (BAJAJ Lighting BCTBLS 36 ZT NW or equivalent as specified in the approved list of make.).
SITC of 78W (Nominal) LED midbay Fixture (WIPRO ENTERPRISES (P) LTD. LH14-102-XXX-57-V1 or equivalent as specified in the approved list of make).
SITC of 40W (Nominal) LED Fixture (Wipro Lighting LE20-491-XXX-57-XX LED or equivalent as specified in the approved list of make).
SITC of 34W (Nominal) Suspended Circular LED FIXTURE (Wipro Lighting LM71-441-XXX-57-XX Orbit or equivalent as specified in the approved list of make).
450 mm dia Domestic Exhaust Fan
UPS SYSTEM
200 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, Input harmonic Current THD <=3% typical at 100% load, ,<=6% maximum at 50% load with Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required. Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to panels, batteries etc complete in all respect and as per direction of Engineer in Charge.
MAIN LT PANEL/ SUB LT PANEL/ MDB & SDB
MAIN LT PANEL
INCOMER FROM TRANSFORMER-1, 2, 3 & 4, (1600 KVA)
Each incomer shall consist of the following:
4 Nos. of 2500A 4P electrically operated Drawout type ACB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F protection.
4 Sets - Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc
4 Sets - Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc.
24 V supply for PLC.
4 Sets of Red. Yellow & blue LED type 22.5mm dia. Indicating lamps with protective fuses.
4 Sets of CTs of the ratio 3200/5 with class 1.0 Accuracy (to APFC Relay)
INCOMER FROM Syncronising Panel Feeder-1, 2, 3 & 4
2500 A 4 Pole ACB, 50 kA breaking capacity drawout type ACB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F protection. 4 Nos.(Bus duct connection-from synk panel)
4 Sets - Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc.
4 Sets of Red. Yellow & blue LED type 22.5mm dia. Indicating lamps with protective fuses.
Mechanical & Electrical Interlocking arrangement among Incomer ACBs.
BUS COUPLER
3 Nos. 3200 A 4 pole electrically operated drawout type ACB having 50 kA breaking capacity but without releases.
3 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.
BUS BARS
3,500A TP&N Aluminum Busbar (50 kA) 100% Neutral.
OUTGOINGS
4 No. 1250 A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
5 No. 1000A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
1 No. 800A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
5 No. 800 A TP MCCB, 50 kA breaking capacity with microprocessor release and rotatry handle
4 No. 630 A TP MCCB, 50 kA breaking capacity with microprocessor release and rotatry handle
3 No. 500 A TP MCCB, 50 kA breaking capacity with microprocessor release and rotatry handle
3 No. 400 A TP MCCB, 50 kA breaking capacity with microprocessor release and rotatry handle
7 No. 315 A TP MCCB, 50 kA breaking capacity with microprocessor release and rotatry handle
6 No. 250 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 No. 200 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 No. 160 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 No. 125 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 No. 100 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 No. 63 A TP MCCB, 50 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Note:- (a) All ACBs shall have Microporcessor based protection unit with LCD screen with lm, tm, Ir, tr & li adjustable on the front. (b) Mechanical & Electrical Interlocking arrangement through PLC among Incomer ACBs and Bus couplers ACBs such that no two supply source be parallel. (c) LT panel 2 incomers will be connected with 3200 Amp bus duct.
DG Syncronising Panel
Incomers :
2000 A 4 Pole ACB, 50 kA breaking capacity electrical drawout type ACB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F protection.-4 Nos
4 Nos. Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc.
4 Nos. of Red. Yellow & blue LED type 22.5mm dia. Indicating lamps with protective fuses.
Bus Coupler
Busbar and their ratings:
5000 A TP&N Aluminum Busbar 100% Neutral.
Outgoing:
2500 A 4 Pole ACB, 50 kA breaking capacity electrical drawout type ACB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F protection. -4 Nos.(Bus duct connection).
1 No. 160 A FP MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
1 No. 125 A FP MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
6Nos. Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc.
6 Nos. of Red. Yellow & blue LED type 22.5mm dia. Indicating lamps with protective fuses.
Note:- (a) All ACBs shall have Microporcessor based protection unit with LCD screen with lm, tm, Ir, tr & li adjustable on the front. (b) Incoming from generators other than 320 KVA and outgoing shall be with bus duct connection.
DG AUXILLIARY PANEL
Incoming:
125 amps (50 KA) 4 Pole MCCB with 2 No. 125 amps 4 Pole contactor with following accessories as per specifications & SLD - 1 No.
Phase indicating light shall be protected by 2 amps MCB’s. - 6 Sets
Bus Bars
300 amps TPN aluminium bus bars with heat shrinkable insulation sleeve.
Outgoings:
5 No. 2.5-4A TP MPCB with contactor and timer for DG engine priming pump including all accessories as required.
1 No. 40 Amps 4 Pole MCB for HSD.
5 No. 40 Amps DP MPCB for battery charger.
1 No. 20 Amps DP MCB for canopy Lighting (750 kVA DG Set).
Spare of the following capacity.
1 No. 40 Amps 4 Pole MCB
1 No. 40 Amps DP MCB
1 No. 20 amps DP MCB
Necessary cable alleys, internal wiring, control wiring, interlocking for DG auxiliary equipment shall also be included in cost of the panel.
Notes:
All MPCBs shall be of 50 KA breaking capacity and suitable for motor duty application.
DG Priming pump ON when DG set is off
Potential free contact shall be provided in all starter feeders for BAS.
DG Aucilliary Panel as described above.
Capacitor Panel- (600 KVAR)
INCOMER
1 No. 1000 Amps TPN ACB (45 kA)
METERING & INDICATION
1 set of phase indicating lamps
1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel.
BUS-BAR
1 Set of 1200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos.of 250A TP MCCB with suitable AC -3 duty contactor
4 Nos.of 125A TP MCCB with suitable AC -3 duty contactor
3 Nos.of 80A TP MCCB with suitable AC -3 duty contactor
2 Nos.of 40A TP MCCB with suitable AC -3 duty contactor
3 Nos. 100 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
4 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
3 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
2 Nos. 12.5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
Note:The capacitor panel shall also stipulate the following
(i) All the capacitors shall be suitable for 525 V
(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.
(iii) Heavy duty exhaust fans to be provided for cooling
(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading.
(v) The APFC shall be protected from following
* over-voltage & voltage unbalance
* Over temperature-system should be in standby mode and automatically restart after above condition restored.
* Total Harmonic Distortion
Supplying,Receiving, fixing, testing & commissioning of Capacitor panel as described above of Capacitor panel as described above
FRONT OPERATED PANEL
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 MVA symmetrical at 415 volts.
All switchboards shall be modular type and have provision for entry of cables from the top /bottom as required.
The cost shall include providing and fixing of 100 x 50 x 6 mm channels for switchboard support.
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.
All MCCB shall have phase barriers, rotary handles and extension terminal as required .
All unbalanced kWH meter shall have communication module for BMS connectivity
Service block Panel
INCOMER
1No. 250A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-250A) Ammeter with ASS with 3 nos. 250/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 125A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 63A TPN MCB .
3 No. 40A TPN MCB .
3 Nos. 63A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB - EXTERNAL LIGHTING
Incoming
1No. 100A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
Outgoing
2 No. 63 Amp TPN MCB.
4 No. 40 Amp FP MCB -
MDB - External Lighting described as above
EXTERNAL LIGHTING PANEL(Outdoor Type weather proof, double door with canopy and suitable MS Structure stand duly painted)
INCOMER
1 No. 100A 4P MCCB ,25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with control SP MCB
BUS-BAR
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
Outgoing
2 Set each having (2 x 4 way TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 2 x 3 No. 32 amps DP RCCB of 30 mA leakage current, 2 No. 32 amps TP Contactor, push button etc. controlled through 2 No. 0-24 hour timer, photo sensor complete as required).
2 Nos. 63A TPN MCB
3 Nos. 20A DP MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Medical equipment Panel
INCOMER
1No. 800A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-800A) Ammeter with ASS with 3 nos. 800/5A CT's
BUS-BAR
1 Set of 1000A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 250A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 160A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 100A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
6 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MAIN LT PANEL (For resisdance)
INCOMER FROM PROPOSED TRANSFORMER-1 & 2, (2 Nos. 500 KVA)
Each incomer shall consist of the following:
2 Nos. of 800A 4P electrically operated Drawout type ACB with Ics=Ics=50KA having Mircroprocessor based releases for O/L, S/C & E/F protection.
2 Sets - Multi function meter with 3 suitable ratio CTs with Class - 0.5 accuracy and HRC fuse protection for measuring Volt, Amps, P.F, KVA, KW, KVAR etc
24 V supply for PLC.
2 Sets of Red. Yellow & blue LED type 22.5mm dia. Indicating lamps with protective fuses.
2 Sets of CTs of the ratio 800/5 with class 1.0 Accuracy (to APFC Relay)
BUS BARS
2 Sets of 1000A TPN Aluminum bus bars with colour coded PVC sleeves
BUS COUPLER
1 Nos. 800 A 4 pole electrically operated drawout type ACB having 50 kA breaking capacity but without releases.
1 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.
OUTGOINGS
3 No.630A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
2 No.500A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
2 No.315A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
2 No.200A 4P MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 No.63A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Capacitor Panel, 175 KVAR
INCOMER
1 No.400A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of phase indicating lamps
1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel.
BUS-BAR
1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos.of 125A TP MCCB with suitable AC -3 duty contactor
2 Nos.of 80A TP MCCB with suitable AC -3 duty contactor
1 Nos.of 40A TP MCCB with suitable AC -3 duty contactor
3 Nos.of 25A TP MCCB with suitable AC -3 duty contactor
2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
2 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
1 Nos. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
3 Nos. 5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
Note:The capacitor panel shall also stipulate the following
(i) All the capacitors shall be suitable for 525 V
(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.
(iii) Heavy duty exhaust fans to be provided for cooling
(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading.
(v) The APFC shall be protected from following
* over-voltage & voltage unbalance
* Over temperature-system should be in standby mode and automatically restart after above condition restored.
* Total Harmonic Distortion
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Automatic Transfer Switch ( ATS )
ATS 200A 4 poles
ATSE shall conform to the requirements of the IEC Standard 60947-6-1 for the source transfer function and 60947–3 for Disconnection and manual on load switching. ATSE shall have 3 stables positions. The Neutral pole of ATS shall be fully rated (100% rating as that of all 4 poles) & all poles should switch Simultaneously.
EMERGENCY PANEL (For Resisdence)
INCOMER
1 No.200A 4P MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
5 No. 80A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos.40 A DP MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Supplying & fixing canopy for Sandwiched bus trucking febricated from 1.6mm thick GI sheet to protect the bus trunking from rain incliding support etc. as required.
Common Area Panel (For type- III, IV & V Residance)
INCOMER
1 No.80A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos.40 A TP MCB
8 Nos.40 A DP MCB
2 Nos.25 A DP MCB
Supplying, Receiving, fixing, testing & commissioning of Common Area panel as described above
METER BOARD-I (For type III Residance)
INCOMER
1 No.500A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-500A) Ammeter with ASS with 3 nos. 500/5A CT's
BUS-BAR
1 Set of 600A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
32 Nos. 63 A DP MCB (before Energy Meter)
32 Nos - 220 volt ,Single phase,50 Hz dual Electronic energy meter (EM-6436 Dual DM with RS-485 or equivalent, with required number of CT's, 5 Amps complete with all accessories including wiring etc. as required as per single line diagram . (Provision only.)
2 Nos.63 A FP MCB, 10 KA. C Curve.
2 Nos.40 A FP MCB, 10 KA. C Curve.
2 Nos.40 A DP MCB, 10 KA. C Curve.
Note: ( The meter should be IS approved & supply by the State Electricity Board)
Supplying, Receiving, fixing, testing & commissioning of Meter Board panel as described above
METER BOARD-I (For type IV Residance)
INCOMER
1 No.630A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-630A) Ammeter with ASS with 3 nos. 630/5A CT's
BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
32 Nos.63 A FP MCB (before Energy Meter)
32 Nos - 415 volt ,Three phase,50 Hz dual Electronic energy meter (EM-6436 Dual DM with RS-485 or equivalent, with required number of CT's, 5 Amps complete with all accessories including wiring etc. as required as per single line diagram .(Space provision only in panel)
1 No. 63 A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos.63 A FP MCB, 10 KA. C Curve.
2 Nos.40 A FP MCB, 10 KA. C Curve.
2 Nos.40 A DP MCB, 10 KA. C Curve.
Note: ( The meter should be IS approved & supply by the State Electricity Board)
Supplying, Receiving, fixing, testing & commissioning of Meter Board panel as described above
METER BOARD-I (For type V Residance)
INCOMER
1 No.315A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-315A) Ammeter with ASS with 3 nos. 315/5A CT's
BUS-BAR
1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
16 Nos.63 A FP MCB (before Energy Meter)
16 Nos - 415 volt ,Three phase,50 Hz dual Electronic energy meter (EM-6436 Dual DM with RS-485 or equivalent, with required number of CT's, 5 Amps complete with all accessories including wiring etc. as required as per single line diagram .(Space provision only in panel)
1 No. 63 A FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos.63 A FP MCB, 10 KA. C Curve.
2 Nos.40 A FP MCB, 10 KA. C Curve.
2 Nos.40 A DP MCB, 10 KA. C Curve.
Note: ( The meter should be IS approved & supply by the State Electricity Board)
Supplying, Receiving, fixing, testing & commissioning of Meter Board panel as described above
METER BOARD (For type VI Residance)
1 Nos - 415 volt ,Three phase,50 Hz dual Electronic energy meter (EM-6436 Dual DM with RS-485 or equivalent, with required number of CT's, 5 Amps complete with all accessories including wiring etc. as required as per single line diagram .(Space provision only in panel)
Supplying, Receiving, fixing, testing & commissioning of Meter Board as described above
Lift SDB Panel (For Girls hostel & Boys hostel)
INCOMER
1 No. 100A TPN MCCB .
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 63A TPN MCB .
5 Nos. 40A TPN MCB .
2 Nos. 40A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel ( For Boys & Girls hostel)
INCOMER
1 No. 315 A FP MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-315A) Ammeter with ASS with 3 nos. 315/5A CT's
BUS-BAR
1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 100 A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCB, 10 KA. C Curve.
2 Nos. 40A TPN MCB, 10 KA. C Curve.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel (For Interns Hostel )
INCOMER
1 No. 200 A FP MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCB, 10 KA. C Curve.
5 Nos. 40A TPN MCB, 10 KA. C Curve.
Supplying,Receiving, fixing, testing & commissioning of above described Panel (Light & Power MDB Panel (For Interns Hostel )
Light & Power MDB Panel ( Nurse Hostel)
INCOMER
1 No. 200 A FP MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
5 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCB, 10 KA. C Curve.
5 Nos. 40A TPN MCB, 10 KA. C Curve.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel (For Patient relative accomodation)
INCOMER
1 No. 250A 4P MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-250A) Ammeter with ASS with 3 nos. 250/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 63A TPN MCB, 10 KA. C Curve.
8 Nos. 40A TPN MCB, 10 KA. C Curve. .
3 Nos. 40A SPN MCB, 10 KA. C Curve. .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel
INCOMER
1 No. 100A 4P MCCB, 36 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 63A TPN MCB, 10 KA. C Curve.
8 Nos. 40A TPN MCB, 10 KA. C Curve. .
3 Nos. 40A SPN MCB, 10 KA. C Curve. .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel (For Resident Doctor hostel)
INCOMER
1 No. 630A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-630A) Ammeter with ASS with 3 nos. 630/5A CT's
BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 250A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos.160A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 Nos. 63A TPN MCB, 10 KA. C Curve.
5 Nos. 40A TPN MCB, 10 KA. C Curve. .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
UPS I/P MDB PANEL (For Auditorium block)
INCOMING :
160 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Indication lamp R/Y/B with backup MCB - 1 Set of Three
BUSBAR:
200 Amp. 2 strip Al. Busbar.
OUTGOING :
3 Nos. 100A Amp TP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos.63A Amp SP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
UPS O/P SDB PANEL (For Auditorium block)
INCOMING :
2 Nos. 100 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Indication lamp R/Y/B with backup MCB - 2 Set of Three
BUS COUPLER:
100 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
BUSBAR:
125 Amp. 2 strip Al. Busbar.
OUTGOING :
100A Amp TPN MCCB having breaking capacity - 25 KA - 0 Nos.
63A Amp SPN MCB having breaking capacity - 16/10 KA - 6 Nos.
63A Amp TPN MCB having breaking capacity - 16/10 KA - 4 Nos.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Light & Power MDB Panel (For Auditorium)
INCOMER
1 No. 500A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-500A) Ammeter with ASS with 3 nos. 500/5A CT's
BUS-BAR
1 Set of 600A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 No. 315A 4P MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle.
2 No. 100A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 No. 63A 4P MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 63A TPN MCB, 10 KA. C Curve. .
3 Nos. 40A TPN MCB, 10 KA. C Curve. .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
HVAC SDB panel-1 (For Auditorium.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
8 Nos. 25A SPN MCB.
2 Nos. 25A SPN MCB (Spare).
2 Nos. 32A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
HVAC SDB panel-2 (For Auditorium.)
INCOMER
1 Nos. 315A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-315A) Ammeter with ASS with 3 nos. 315/5A CT's
BUS-BAR
1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 24 KW STAR DELTA Starter with 80A TPN MCCB.
8 Nos. 4 KW DOL Starter with 25A TPN MPCB.
6 Nos. 25A SPN MCB.
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB Lighting panel (For Medical college block)
INCOMER
1No. 400A 4P MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-400A) Ammeter with ASS with 3 nos. 400/5A CT's
BUS-BAR
1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 100A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
8 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 63A TPN MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB Power panel (For Medical college block)
INCOMER
1 No. 630A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-630A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
9 Nos. 160A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 100A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Lift SDB Panel-1 (For Medical college block)
INCOMER
1 No. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 63A TPN MCB .
5 Nos. 40A TPN MCB .
4 Nos. 40A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU MDB Panel (For Medical college block)
INCOMER
1 No. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 100A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-1 (For Medical block Ground FLOOR.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
2 Nos. 25A TPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-2 (For Medical block 1st FLOOR.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
3 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
8 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
1 Nos. 25A TPN MCB
3 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-3 (For Medical block 2nd FLOOR.)
INCOMER
1 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
7 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
4 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
2 Nos. 25A TPN MCB
3 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-4 (For Medical block 3rd , 4th, 5th FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
2 Nos. 25A TPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-7 (For Medical block Terrace FLOOR.)
INCOMER
1 Nos. 100A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's
BUS-BAR
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 12 KW STAR DELTA Starter with 40A TPN MPCB.
2 Nos. 6 KW DOL Starter with 32A TPN MPCB.
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
UPS I/P MDB PANEL (For Medical College)
INCOMING :
250 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Indication lamp R/Y/B with backup MCB - 1 Set of Three
BUSBAR:
300 Amp. 4 strip Al. Busbar.
OUTGOING :
3 Nos. 160A Amp TP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos.63A Amp SP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
UPS O/P SDB PANEL (For Medical College)
INCOMING :
2 Nos. 160 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
Indication lamp R/Y/B with backup MCB - 2 Set of Three
BUS COUPLER:
160 Amp FP MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
BUSBAR:
200 Amp. 4 strip Al. Busbar.
OUTGOING :
100A Amp TPN MCCB having breaking capacity - 25 KA - 4 Nos.
63A Amp SPN MCB having breaking capacity - 16/10 KA - 7 Nos.
63A Amp TPN MCB having breaking capacity - 16/10 KA - 3 Nos.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB (Lighting panel for Hospital block)
INCOMER
1 No.800A 4P MCCB, 35 kA breaking capacity with Microprocessor release and rotatry handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-800A) Ammeter with ASS with 3 nos. 800/5A CT's
BUS-BAR
1 Set of 1000A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
5 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 160A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
1 Nos. 63A TPN MCB
8 Nos. 40A TPN MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB Power panel (For Hospital block)
INCOMER
1 No. 1000 A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's
BUS-BAR
1 Set of 1200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
5 Nos. 160A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
6 Nos. 125A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
16 Nos. 63A TPN MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Automatic Transfer Switch ( ATS )(UPS I/P Panel I/C for Hospital Building)
ATS 1000A 4 poles
ATSE shall conform to the requirements of the IEC Standard 60947-6-1 for the source transfer function and 60947–3 for Disconnection and manual on load switching. ATSE shall have 3 stables positions. The Neutral pole of ATS shall be fully rated (100% rating as that of all 4 poles) & all poles should switch Simultaneously.
MDB UPS Input panel (For Hospital block)
INCOMER
1 No. 1000 A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's
BUS-BAR
1 Set of 1200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
5 No. 400A TPN MCCB, 35 kA breaking capacity with Microprocessor release and rotatry handle.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
MDB UPS output panel (For Hospital block)
INCOMER
4No. 315A 4P MCCB, 35 kA breaking capacity with Microprocessor release and rotatry handle.
METERING & INDICATION
4 set of R,Y,B phase indicating lamps
4 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
4 No. (0-400A) Ammeter with ASS with 3 nos. 400/5A CT's
BUS-BAR
1 Set of 1200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 250A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 160A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 125A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
3 Nos. 63A TPN MCB
2 Nos. 40A TPN MCB
14 Nos. 63A DP MCB
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Lift MDB Panel (For Hospital block)
INCOMER
1 No. 315A TPN MCCB .
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-315A) Ammeter with ASS with 3 nos. 315/5A CT's
BUS-BAR
1 Set of 400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
8 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
6 Nos. 63A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Lift SDB Panel (For Hospital block)
INCOMER
1 No. 80A TPN MCCB .
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 63A TPN MCB .
4 Nos. 40A TPN MCB .
3 Nos. 40A SPN MCB .
Supplying,Receiving, fixing, testing & commissioning of above described Panel
HVAC panel (For Hospital block)
INCOMER
1 No. 1200 A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's
BUS-BAR
1 Set of 1400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 400A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for chiller.
3 Nos. 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for HWG.
2 Nos. 30 KW Star Delta Starter with 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (for secondary pumps ).
4 Nos. 20 KW Star Delta Starter with 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle ( CONDENSER PUMP)
2 Nos. 15 KW Star Delta Starter with 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle for Secondary CHW. PUMP.
4 Nos. 7.5 KW Star Delta Starter with 40A TPN MCB 10KA for PRIMARY CHW. PUMP.
3 Nos. 7.5 KW Star Delta Starter with 40A TPN MCB 10KA for COOLING TOWER.
1 Nos. 400A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 63A TPN MCB (Spare).
3 Nos. 40A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
SMOKE EXHAUST panel (For Hospital block)
INCOMER
1 Nos. 630A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-630A) Ammeter with ASS with 3 nos. 630/5A CT's
BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for chiller.
8 Nos. 12 KW Star Delta Starter with 40A TPN MPCB.
1 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 63A TPN MCB (Spare).
3 Nos. 40A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
SMOKE EXHAUST SDB panel (For Hospital block)
INCOMER
1 Nos. 200A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for chiller.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's
BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
8 Nos. 10 KW Star Delta Starter with 40A TPN MPCB.
2 Nos. 63A TPN MCB (Spare).
3 Nos. 40A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU panel (For Hospital block)
INCOMER
1 Nos. 800A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-800A) Ammeter with ASS with 3 nos. 800/5A CT's
BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 160A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
6 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
12 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
4 Nos. 25A TPN MCB.
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-1 (For Hospital block WING-1, G.F.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 5.6 KW DOL Starter with 32A TPN MPCB.
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
2 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-2 (For Hospital block WING-2, G.F.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 5.6 KW DOL Starter with 32A TPN MPCB.
3 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
5 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
10 Nos. 1.0 KW DOL Starter with 16A TPN MPCB.
4 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-3 (For Hospital block WING-3, G.F.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
2 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-4 (For Hospital block WING-1, 1st FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-5 (For Hospital block WING-2, 1st FLOOR.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 3.7 KW DOL Starter with 25A TPN MPCB.
4 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
3 Nos. 1.0 KW DOL Starter with 16A TPN MPCB.
2 Nos. 25A TPN MCB.
4 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-6 (For Hospital block WING-3, 1st FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-7 (For Hospital block WING-1, 2nd FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
3 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-8 (For Hospital block WING-2, 2nd FLOOR.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 3.7 KW DOL Starter with 25A TPN MPCB.
2 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
6 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
1 Nos. 25A TPN MCB.
4 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-9 (For Hospital block WING-3, 2nd FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-10 (For Hospital block WING-1, 3rd FLOOR.)
INCOMER
1 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 10.0 KW STAR DELTA Starter with 40A TPN MPCB.
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
2 Nos. 25A TPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-11 (For Hospital block WING-2, 3rd FLOOR.)
INCOMER
1 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-63A) Ammeter with ASS with 3 nos. 63/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 3.7 KW DOL Starter with 25A TPN MPCB.
2 Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
6 Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
2 Nos. 25A TPN MCB.
4 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-12 (For Hospital block WING-3, 3rd FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-13 (For Hospital block WING-1 & 2, 4th FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
2Nos. 2.5 KW DOL Starter with 25A TPN MPCB.
3Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
3Nos. 1.0 KW DOL Starter with 16A TPN MPCB.
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-14 (For Hospital block WING-3, 4th FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
1 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
2 Nos. 25A TPN MCB
1 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-15 (For Hospital block WING-2, 5th FLOOR.)
INCOMER
1 Nos. 160A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's
BUS-BAR
1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
2 Nos. 63A TPN MCB
2 Nos. 15.0 KW STAR DELTA Starter with 63A TPN MPCB.
1 Nos. 10.0 KW STAR DELTA Starter with 40A TPN MPCB.
1 Nos. 7.5 KW STAR DELTAStarter with 40A TPN MPCB.
1 Nos. 6.0 KW DOL Starter with 32A TPN MPCB.
2 Nos. 5.7 KW DOL Starter with 32A TPN MPCB.
2 Nos. 4.4 KW DOL Starter with 25A TPN MPCB.
2 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
4 Nos. 4.0 KW DOL Starter with 25A TPN MPCB.
3 Nos. 63A TPN MCB (Spare).
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-16 (For Hospital block WING-3, 5th FLOOR.)
INCOMER
1 Nos. 40A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-40A) Ammeter with ASS with 3 nos. 40/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos.2.5 KW DOL Starter with 25A TPN MPCB.
6 Nos. 25A SPN MCB
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
AHU SDB panel-17 (For Hospital block TERRACE FLOOR.)
INCOMER
1 Nos. 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-80A) Ammeter with ASS with 3 nos. 80/5A CT's
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
3 Nos. 10.0 KW STAR DELTA Starter with 40A TPN MPCB.
1 Nos. 6.0 KW STAR DELTA Starter with 32A TPN MPCB.
1 Nos.2.5 KW DOL Starter with 25A TPN MPCB.
4Nos. 1.5 KW DOL Starter with 20A TPN MPCB.
2 Nos. 32A TPN MCB (Spare).
2 Nos. 25A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Isolation Panel for OT’s - 10 KVA
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of (Pieco make ) isolation panels fabricated out of Stainless Steel (304) incubicle compartmentalized wall mounted, dust and vermin proof with reinformcement of suitable size angle iron, channels T sections and / or flats wherever necessary including stainless steel door fitted with stainless screws (Degree of protection IP42). Knockouts shall be provided at the top of the panel. Panels shall be treated with all anticrossive process before painting.
Approval shall be taken in form of shop drawings before fabrication. Cadmimum plated hardware and conform to NFPA / UL / IS / IEC code of pratice shall be used with followings :
1 No. 63 amps DP ELCB 30 mA leakage current (primary side of transformer).
1 No. 63 amps DP MCB (Primary side of transformer).
Isolation Transformer
Rating : 10 KVA
Ratio : 1:1
Primary voltage : 230 V AC + 10%
Secondary Voltage : 230 V AC + 1%
Cooling : Air Cooled
Winding & Type : Copper winding double wound with shield grounded to isolated ground bus secondary ungrounded
Spike suppression level : Not more than 3 dB
Insulation Class : H
Overloading Capacity : 50% for one hour
Sound level
complete Unit
with cabinet : Not more than 30 dB.
Line Isolation Monitor : Hazard Index 5 mA
Conist of leakage current detector control transformer mother board with relay etc. LIM monitor card.(Pieco Make)
Indication & Metering
Following indication for Hazard Index.
Leakage Lamp Zone
Current mA Colour
0-4 Green Safe Zone
5-10 Red Hazard Zone Alarm
1 No. orange colour lamp shall be provided for mains ON.
Suitable rating MCB’s shall be provided for all indicating lamps.
Audio / Visual alarm, test / reset PB’s including all accessories as required.
Outgoing MCB : 12 Nos. 20 amps DP MCBs.
All ELCB shall be of SI/HI-type.
All MCB’s shall be minimum of 10 KA breaking capacity & ‘D’ curve only.
Ventilation fans for cooling of isolation transformers shall be provided.
SIZE - 1150 mm H X 650 mm W X 250mm D. Wgt -155 kg apx
Isolation for OT’s described as above.
33 kV HT 4PANEL SWITCHBOARD
Design, fabrication, assembling, supply, loading and forwarding to site of 33 kV, 1500 MVA (26.3 kA), 630A, HT, 5 (Five) Panel Vacuum circuit breaker Switchboard (One Incomer & Four outgoing with Vacuum circuit Breaker Panels), cubicle type, made out of 2 mm thick sheet steel, totally enclosed, IP 4X, 50 deg. C ambient temperature, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, powder coated painting, suitable for operation on 33 kV, 3ph, 50 Hz +/- 5% AC system with copper busbars, Vacuum circuit breaker mounted on horizontally withdrawable truck including supply and installation of the following components as per Technical specifications, Technical particulars.
Incomer 1 No. 33 kV HT supply comprising of:
1 No. incomer Vacuum Circuit Breaker - 630 A, 3 pole, 26.3 kA breaking capacity for 1 second.
Breaker control switch.
24 V DC Tripping Coil.
24 V DC Closing Coil.
240 V AC spring charge motor.
Set of ON/ OFF indicating lamps.
Set of Phase indicating lamps (RYB).
Clear lamp for trip circuit health supply.
Digital electronic multi function meter with RS485 port (Conzerve Model-EM 6400 or equivalent)
Digital Frequency Meter
Aux. relays for Anti Pumping & indication.
Trip circuit supervision relay.
3 No. Over current and Earth fault IDMT numeric type relay with instantaneous high set element range 500 – 2000%
3 No. Cast resin CTs of dual ratio 60 - 120/ 5 Amps CL:0.5, 5P10, 15 VA.
3 No. Cast resin drawout type PTs 33 kV/ √3/ 110 √3, class 1, 100 VA.
Suitable space for termination of 1 No. 3C x 300 sq.mm 33 kV HT XLPE cable as incoming.
Outgoing 4 No. 33 kV HT supply each comprising of:
1 No. outgoing Vacuum Circuit Breaker - 630 A, 3 pole, 26.3 kA
Breaker control switch.
24 V DC Tripping coil
24 V DC Closing coil
240 V AC spring charge motor
Set of ON/ OFF indicating lamps.
Clear lamp for trip circuit health supply.
Aux. relays for Anti Pumping & indication.
Tripping relay for each transformer fault.
Trip circuit supervision relay & Lockout relay.
3 No. Over current and Earth faullt IDMT numeric type relay with instantaneous high set element.
3 No. Cast resin CTs of dual ratio 30 - 60/ 5 Amps CL:0.5, 5P10, 15 VA.
Suitable space for termination of 1 No. 3C x 300 sq.mm 33 kV HT XLPE cable as outgoing.
Note: Cable entry shall only be from BOTTOM.
33 kV HT 4 Panel Switch Board complete as required
11 KV HT VCB Single Breaker Panel Board (Indoor Type) (1 Incomming / Outgoing)
Supply, Receiving, Unloading, Shifting, Installation Testing & Commissioning of 11 KV Single Breaker Vacuum Circuit Breaker Panel Board as 1 Incomming / Outgoing shall be metal clad floor mounting complete as per specification and as described.
630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following.
Manually and motor operated, spring charged (release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indication"OFF" push buttons for emergency trip (shrouded) test/service position limit switches with 6 NO/6 NC breaker auxilliary contacts in service position, 24 Volts DC shunt trip coil and strip heater to prevent moisture absorption.
INCOMING / OUTGOING PANEL - 1 NO.
1 No 630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation,vermin proof,fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
3 No. Single Phase double core current transformer 60/5 Amp epoxy cast insulated class of insulation E.
Core 1-15VA burden class 1.0 for metering.
Core 2-15VA burden class 5P10 for protection.
P.T's of 11KV/1.732, 110V/1.732, 100VA with suitable rating H.T. & L.T. fuse conforming to relevant IS Standards and complete as required.
One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements.
1 No. Anti Pumping device.
1 No. Circuit breaker control switch for electrical (T/N/C).
1 No. limit switch for test & service position.
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
1 Set of following indicating lamps.
Red, Yellow & Blue for phase indication.
Amber for Trip indication.
Red `ON' Green `OFF'
Spring charge indication.
Auto trip indication.
1 No. hooter with hooter acceptance and reset push button.
1 No. master trip relay. ( Electromechanical Type )
1 No.Trip ckt supervision relay. (Electromechanical Type )
600A color coded heat shrinkable sleeved TP Copper busbar of 350 MVA fault rating.
1 Set of fuses, ferrules, wiring etc. as required.
1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete as required.
1 No. control Transformer of 1KVA for giving supply to indication lamps etc having 11 KV/415-230V AC rating epoxy cast resin dry type Transformer. The connection for control transformer shall be taken from the cable side before the circuit breaker tapping.
Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules / coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
H.T. Panel describe as above
11 KV HT VCB Four Breaker Panel Board (Indoor Type) (1 Incomming + 2 Outgoing)
Supply, Receiving, Unloading, Shifting, Installation Testing & Commissioning of 11 KV Four Breaker Vacuum Circuit Breaker Panel Board as 1 Incomming & 2 Outgoing shall be metal clad floor mounting complete as per specification and as described.
630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following.
Manually and motor operated, spring charged (release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indication"OFF" push buttons for emergency trip (shrouded) test/service position limit switches with 6 NO/6 NC breaker auxilliary contacts in service position, 24 Volts DC shunt trip coil and strip heater to prevent moisture absorption.
INCOMING PANEL - 1 NO.
1 No 630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation,vermin proof,fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
3 No. Single Phase double core current transformer 60/5 Amp epoxy cast insulated class of insulation E.
Core 1-15VA burden class 1.0 for metering.
Core 2-15VA burden class 5P10 for protection.
P.T's of 11KV/1.732, 110V/1.732, 100VA with suitable rating H.T. & L.T. fuse conforming to relevant IS Standards and complete as required.
One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements.
1 No. Anti Pumping device.
1 No. Circuit breaker control switch for electrical (T/N/C).
1 No. limit switch for test & service position.
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
1 Set of following indicating lamps.
Red, Yellow & Blue for phase indication.
Amber for Trip indication.
Red `ON' Green `OFF'
Spring charge indication.
Auto trip indication.
1 No. hooter with hooter acceptance and reset push button.
1 No. master trip relay. ( Electromechanical Type )
1 No.Trip ckt supervision relay. (Electromechanical Type )
600A color coded heat shrinkable sleeved TP Copper busbar of 350 MVA fault rating.
1 Set of fuses, ferrules, wiring etc. as required.
1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete as required.
1 No. control Transformer of 1KVA for giving supply to indication lamps etc having 11 KV/415-230V AC rating epoxy cast resin dry type Transformer. The connection for control transformer shall be taken from the cable side before the circuit breaker tapping.
Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules / coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
OUTGOING PANEL - 2 NO. (Each outgoing feeder shall have following)
1 No 630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation,vermin proof,fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
3 No. Single Phase double core current transformer 30/5 Amp epoxy cast insulated class of insulation E.
Core 1-15VA burden class 1.0 for metering.
Core 2-15VA burden class 5P10 for protection.
One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements.
1 No. Anti Pumping device.
1 No. Circuit breaker control switch for electrical (T/N/C).
1 No. limit switch for test & service position.
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
1 Set of following indicating lamps.
Red, Yellow & Blue for phase indication.
Amber for Trip indication.
Red `ON' Green `OFF'
Spring charge indication.
Auto trip indication.
1 No. hooter with hooter acceptance and reset push button.
1 No. master trip relay. ( Electromechanical Type)
1 No.Trip ckt supervision relay (Electromechanical Type)
1 Set of fuses, ferrules, wiring etc. as required.
4 No. VAA33 auxiliary relay for transformer fault, alarm and trip.
12 Annunciator window for all electrical and transformer fault.
Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules / coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
H.T. Panel describe as above
DISTRIBUTION TRANSFORMERS
Design, manufacture, testing at works, supply, loading and forwarding to site store of 1600 kVA 3 phase, 33 kV/ 0.433 kV indoor type oil filled Transformer copper wound with Dyn 11 connection and neutral brought out for earthing. The transformer shall be provided with (-) 15% and (+) 5% in step of 1.25% each ON load tap changer on HT side. HT side cable termination box shall be suitable for 33 kV, 3 C x 300 Sq. mm XLPE cable and Bus duct on low voltage side.. The transformer shall be supplied with all standard fitting viz dial type winding oil Teprature Indiator, Bucholz relay with trip Alarm and temperature indicator, alarm contacts, thermistors for Alarm and Trip, winding temperature relay unit with Alarm and trip, lifting lugs, earthing studs and marshlling box, drain oil point etc. complete in all respect with all accessories as required as per specification.
Design, manufacture, testing at works, supply, loading and forwarding to site store of 500 kVA 3 phase, 11 kV/ 0.433 kV indoor type oil filled Transformer copper wound with Dyn 11 connection and neutral brought out for earthing. The transformer shall be provided with (-) 7.5% and (+) 2.5% in step of 2.5% each ON load tap changer on HT side. HT side cable termination box shall be suitable for 11 kV, 3 C x 300 Sq. mm XLPE cable and 6 Run of 3.5 core 300 Sq. mm XLPE Aluminium Armoured cable on low voltage side.. The transformer shall be supplied with all standard fitting viz dial type winding oil Teprature Indiator, Bucholz relay with trip Alarm and temperature indicator, alarm contacts, thermistors for Alarm and Trip, winding temperature relay unit with Alarm and trip, lifting lugs, earthing studs and marshlling box, drain oil point etc. complete in all respect with all accessories as required as per specification.
Supplying of following size 33/0.433 kV grade XLPE (E) aluminium conductor armoured cables as per specifications.
3 C x 300 sq.mm 33 kV XLPE (E) cable
Supplying, termination, testing and commissioning of following indoor/outdoor type cable end termination suitable for 33 KV (E) aluminum conductor XLPE cable on H.T. switchgear / transformer complete with heat shrinkable jointing kit, cable lugs etc. complete as required.
Indoor Type
3Cx300 sq.mm. XLPE insulated Al. Ar. Cable
Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per technical specifications
3Cx300 sq.mm. XLPE insulated
Supplying, laying GI sleeves of following sizes:
150 mm dia
250 mm dia
300 mm dia
SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF DG SET INCLUDING ALL ACCESSORIES (NON DSR)
Manufacture, supply, testing at works, forwarding to site, unloading, inspection, shifting to base, installation, testing and commissioning of 1250 kVA prime continuous (actual) rating radiator cooled diesel generating set in acoustic enclosure along with AMF module (PCC 3.3 or equivalent) with PMG, base frame, Alternator, Static Excitation System, Lube Oil System, Electronic Governor, Batteries & Battery charger, Instrumentation, inbuilt oil fuel tank, residential type Silencer with Bellows, Alarms, Engine Control Panel, AVM Pads, AVR Panel, Terminal Arrangements including cable termination box with all associated equipment/ work as per specifications. Alternator shall have class H insulation and rated for 1000 kW output. Engine shall not be derated upto 50°C ambient.
EXHAUST PIPE & CHIMNEY
Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe with all fixing accessories and hardwares. The exhaust pipes shall be dual insulated with first layer of 25 mm thick ceramic fibre wool insulation (128 Kg/ cubic metre density) and second layer of 50 mm thick mineral wool (150 Kg/ cubic metre density) insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet including all support as required.
300 mm dia
250 mm dia
150 mm dia
Design, supply, fabrication and erection of steel structure from channel /angle iron of suitable sizes to support the chimney /exhaust MS pipe duly taking into consideration of the wind load/pressure at the site etc. including the cost of civil foundations as required to support a maximum of 2 nos exhaust chimneys on the overhead platform complete as required. The structure shall be given primer coat and two coats of enamel painting.
Aluminium cladding for the residential silencers
SS Flexible Bellow 250mm dia
Supply & Fixing of Y Bend for Exhaust pipe
SOLAR POWER SYSTEM
Supply, installation,testing & commissioning of solar power system by solar photovoltaic panel of 200 KWp at roof of building also including battery bank,inverter & provision for normal power connection in distribution panel as per manufacture specification and as required for external ligt,garden light,facard etc.
LIGHTNING PROTECTION SYSTEM.
Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.
Supply of Class A Advance Lightning Protection System ESEAT ION Streamer as per IEC 60:1, NFC 17 -102. The system should be so designed to be capable of protecting against direct lightning point as well as conducting/diverting it to Earth completely after tracing the lightning in advance. The air terminal should be of 8 inches’ length with 6 inches dia. and verified and tested from CPRI at 40 kA current discharge and International test report of impulse wave test of 100 kA of 10/350 micro second according to UNE-EN 62561-1 para 6.3. The wave form should be same as indicated in UNE 21.186 of para C.3.4 and NFC 17 102 Sep 2011 article C.3.4. The Supplier should be OEM. Make : JMV Model 1.5
System Components: The system should consist of the following components for performing the desired task as above in the scope.
Early Streamer Emission Air Terminal with following features:
Stainless Steel central capture head of 316 L
Other avoiding bolting and water infiltration that can cause premature corrosion
Ion Generator Device non electronics type for early streamer emission
Control over release of ions positive or negative
Generation of streamer through Corona Effect
Area coverage in radius 107 mtr. (approx.) IN LEVEL 3 (MODEL 1.5)
System should not depend on electrical energy.
The one peak current should have 109 kA 10/350 micro second.
ESE air terminal should be mounted on round DMC insulator having 80 mm dia. and length of 145 mm for termination of down conductor. This should be mounted between air terminal and mast.
Supply of 40 mm dia. class b type GI mast of length 3 mtrs . The base plate should be of 300 x 300 x 5 mm thick for mounting of ESE Lightning Arrester. For 67 mtr radius
Dimension and weight to be furnished.
BLC Lightning Strike Counter with following features: Number of counts- 6 digits Current sensitivity- 1 kA to 200 Ka Inductance Shunt- 0.5 micro Henry Enclosure- IP 65 ABS, Size (200x200X140 mm) No external power source is required
Down Conductor with following features:
Supply of JMV 70 sq. mm insulated copper cable black in colour for high lightning discharge current as a down conductor. The tensile strength should be between 220-270 (N/sq. mm). The copper cable design to take care up to 200 kA discharge current.
Test Link Joints in IP 65 ABS Enclosure with transparent cover, Box Size (200x200x40 mm). Copper Test Link size should be (150X25X3 mm)
Maintenance Free Earthing Supply of low carbon high tensile steel rod with copper coating of 250 micron JMV- 1730CBR . the dia should be 17.2 mm with length of 10 feet. The rod should be as IEC 62561-2 and UL 467 and tested from CPRI at 25 KA. With exothermic weld of cu strip 25x 6x150 mm. The copper bonded rod should be surrounded with 50 kg of Earth enhancing materiel JAM fill as per IEC 62561-7 and having NABL Test report for ROHS with DMC pit cover.
Installation Charges for Lightning Arrester
Installation charges for Earthing for normal soil
FIRE DETECTION & ALARM AND DIGITAL VOICE EVACUATION SYSTEM
Supply, Installation, Testing & Commissioning of the following:
Intelligent addressable single addressable control relay module - Form “C” contact type. (UL, ULC listed & CSFM, MEA, FM approved)
Intelligent addressable monitor modules to give input to FAS from Sprinkler Flow Switch & WLD Monitoring, DG status monitoring, VESDA etc. complete as required and as per specification. (UL, ULC listed & CSFM, MEA, FM approved)
Intel Pentium Core II Duo (tm)-processor, operating at a minimum of 2GB of RAM, 80 160 GB hard disk, optical mouse, 32X CD-ROM, 3PCI / 1 ISA expansion slots, sound card, 200 watt power supply, and SVGA graphics with a screen resolution of 1024 x 768.
Supplying and drawing co-axial TV cable RG-6 grade copper conductor PE insulated, with PVC shealth in the existing surface/ recessed PVC conduit as required.
Supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes MS boxes for MATV system and shall be suitable for interactive system.
Two Way (S-2)
Four way (S-4)
Two way tap off (T2)
Four way tap off (T4)
FIRE SUPRESSION SYSTEM
NOVEC 1230 GAS OR EQUIVALENT FLOODING SYSTEM
Gas Bassed Fire Suppression system for Electrical panel
Design, supply, Installation, Testing & Commissioning of Novec 1230 gas or equivalent based fire suppression system comprising of the following
For Electrical panel
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230 System or equivalent for Electrical Panels(Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components
2kg capacity Novec 1230 or equivalent , DLP Assembly with automatic valve, push in connector for tube, Novec 1230 or equivalent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
4kg capacity Novec 1230 or equivalent, DLP Assembly with automatic valve, push in connector for tube, Novec 1230 or equivalent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
Linear pneumatic heat Detection Tube with all necessary fittings & supports.
A/V alarm as per standard of manufacturer or as approved by EIC
Master Control Unit for controlling each system complete with pressure switches buzzzers including all necessary accessories & electrical wire harness to make entire system functional complete in all respect and as per direction of Engineer In Charge.
Installataion, Testing & Commisioning of above system complete in all respect and as per direction of Engineer in Charge
Supplying, installation, testing and commissioning of Spike light fitting suitable for 9 watt IP 65 LED having system lumen output of minimum 900 lumens complete with all accessories and lamp.
Providing, installation of Solar power plant 10.4KWp along with solar PCU 5KVA 96V, with 2x200Ahx8nos. battery with acc & installation.(for 150W 15Nos. LED lights)
Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s and terminal block. Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.
Wiring with 2 x 2.5 sq. mm. PVC insulated copper conductor 1100 V grade wires in existing pole including connecting at the lighting fixtures complete.
Supply, installation, testing and commissionin of following polycarbonate weather proof (IP-55) junction boxes including terminal / connector block complete as required.
One way
Two way
Three way
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
80 mm. dia
ISI marked (IS:15683) 4.5 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder
ISI marked (IS:15683) 6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers
Providing and fixing Fire Extinguishers (CO2 type powder ) 22.5 Kg Capacity ( heel type ) complete with all accessories as per manufacturers specifications. ( Pump room )
ISI marked fire extinguisher Mech. Foam type capacity 50 litres with gunmetal cap and nozzle, trolly mounted and complete in all respects including initial fill.
Providing & fixing GM fire Brigade Suction hose coupling (Draw out Connection) with nut for female coupling as per IS:902-1974 complete with 100mm dia. 1 No C.I Foot valve flanged (to be connected to static water tank)
Providing and fixing weather proof Fire Hose Cabinet of size not less than 0.9x 0.675x 0.30mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.
Providing and fixing of Fire Hose Cabinet size not less than 1.2 x 0.90x2.1 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required.
80 mm dia
100 mm dia
150 mm dia
200 mm dia
Supply, installation, testing and commissioning of 150 mm dia Zonal Control Valve inclusive of 1 nos 150 mm dia butterfly valve, 150mm diam. non return valve, Flow Switch, water pressure gauges & 25 mm dia. Auxillary Drain valve with sight glass with necessary GI (H) piping with threaded fittings of required sizes complete
Supply, installation, testing and commissioning of 100 mm dia Zonal Control Valve inclusive of 1 nos 100 mm dia butterfly valve, 100mm diam. non return valve, Flow Switch, water pressure gauges & 25 mm dia. Auxillary Drain valve with sight glass with necessary GI (H) piping with threaded fittings of required sizes complete
Oil Tank
Supplying, fixing and commissioning 500 ltrs. capacity including first fill of 500 ltrs high speed diesel oil in 16 SWG MS steel oil tank with manhole cover, glass gauge, inlet and outlet connections with gate valves, drain plug, GI piping between tank and engine vent pipe with wire mesh etc. duly painted and mounted on suitable MS angle staging to maintain gravity flow of oil.
Exhaust piping
Providing & fixing 150 mm diameter M.S. Class 'C' diesel pump exhaust pipe includings all fittings, like bends, tees etc. clamps / structural steel supports. The pipe shall be provided with 75mm thick fiberglass insulation & covering the insulation with 500 g polythene sheet giving proper overlaps & sealing the joints with suitable adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet cladding.
Providing, fixing, testing and commissioning of Pressure Vessel Fabricating from Minimum 8 mm Thick MS Sheet (450 mm dia & 2000 mm height) for pressurization of fire system complete with pressure switches with isolation valves, pressure gauge with isolation valve, valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.
Dia of pressure vessel : 450 mm dia
Height of Pressure Vessel : 2000 mm height
Working Pressure : 10 kg / sq cm
Test Pressure : 20 kg / sq cm
ARI Certified Rotary Screw Water Cooled Chilling Machine With Air Cooled VFD & Microprocessor Based Control Panel (Capacity - 200 TR)
Supply, installation, testing and commissioning of Rotary Screw Water cooled water Chilling M/C of 200 TR actual capacity at below mentioned operating conditions with R - 134 A refrigerant, open / semihermatic / hermatically sealed compressor, driven by suitable KW Sq. Cage induction motor complete with variable speed drive complete with watercooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), Microprocessor based control panel, chiller / floor mounted aircooled VSD with IP 54 enclosure, active harmonic filters & accessories etc. all mounted on M.S. frame. Motor shall be suitable for 415 volts ± 10%, 50Hz ± 5 %, three phase A.C. supply. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system. Actual capacity of chillers shall be based the parameters given below & power consumption / TR at 100%, 75%, 50% & 25% load shall be based on ARI Condition.
Condenser CDW IN - 32.22º C.
CDW OUT - 36.38º C.
FLOW - 3024 LPM
Fouling Factor (MKS) - 0.001
Pressure Drop Max - 6.5 Meter
Chiller CHW IN - 12.22º C.
CHW OUT - 6.67º C.
FLOW - 1815 LPM
Fouling Factor (MKS) - 0.0005
Pressure Drop Max - 5.0 Meter
COP At AHRI Condition - 5.8 (Min)
Power Consumption Of Chiller / TR At Tender Condition Mentioned Above (Max)(IKW/TR) - 0.70
The price quoted for supply, installation, testing & commissioning of Rotary Screw Water Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (3W+1S)
Condenser Water Pumps
Condenser Water Pumps (3W+1S)
Capacity of Each Pump LPM 3024 (800 GPM)
Pump Head (Mt) 30.0
Motor HP 30.0 (Suggested)
Pump Efficiency (Min) 80%
Primary Chilled Water Pumps Set
Primary Chilled Water Pumps Set (3W+1S)
Capacity of Each Pump LPM 1815 (480 GPM)
Pump Head (Mt) 12.00
Motor HP 10.0 (Suggested)
Pump Efficiency (Min) 75%
Secondary Chilled Water Pumps Set
For Zone I - Hospital Building
Secondary Chilled Water Pumps Set (1W+1S)
Capacity of Each Pump LPM 3720 (984 GPM)
Pump Head (Mt) 25.0
Pump Motor HP 30.0 HP (Suggested)
Pump Efficiency (Min) 80%
For Zone - II - Medical College Building
Secondary Chilled Water Pumps Set (1W+1S)
Capacity of Each Pump LPM 1724 ( 456 GPM)
Pump Head (Mt) 25.0
Pump Motor HP 20.0 HP (Suggested)
Pump Efficiency (Min) 80%
Variable Speed Pumping System for Secondary Chilled Water Pumps
Supply, installation, testing and commissioning of Variable Speed Pumping system for Zone I consisting of two numbers 30 HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.
Supply, installation, testing and commissioning of Variable Speed Pumping system for Zone II consisting of two numbers 20 HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.
FRP Induced Draft Cooling Tower (225 TR)
Supply, installation, testing and commissioning of FRP Induced draft, cross / counter flow, twin fan, direct driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, Weather Proof IP 55 TEFC Motor (IE3), Propeller Fan, FRP Basin with additional sump in the bottom of the basin on every outlet point to avoid vortex formation in the condenser water pipe line, Hot dip galvanised Steel Ladder, Stainless Steel hardware including nut, bolt, washer etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. Tower fan motor shall be suitable for VFD operation and operation of VFD system shall be based approach of cooling tower.
Performance required for cooling tower is minimum 38.2 gpm/hp when tested according CTI ATC-105 procedure.
Water Flow - 3402 LPM (4 GPM / TR)
Designed Wet Bulb Temperature - 28.9 °C
Water Inlet / Outlet Temperature - 36.4 °C / 32.22 °C
Cooling Tower Basin Height - 300.0 MM
Fan Motor HP - 1 x 10.0 HP, 960 RPM
Cooling Tower Capacity: 678000 Kcal/Hr, 3W+1S
VFD System For Cooling Tower
Supply, installation, testing and commissioning of VFD having IP-54/55 enclosure from factory with heat sink for each cooling tower fan (10 / 7.5 HP Each, 8 Nos.) with VFD control panel & other accessories as required. VFD control panel shall be installed in the AC Plant Room. The system shall be complete with variable frequency drive (VFD) suitably interfaced with other system components, hand / auto macro designed, 01 no. dedicated microprocessor based logic controller, software duly downloaded, tempearture Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required. Operation of VFD system shall be based approach of cooling tower.
Pressurised Expansion Tank (Chilled Water)
Supply, installation, testing and commissioning of pressurised insulated chilled water Expansion Tank of capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable butile - EPDM membrane, operating pressure 10 Kg/cm² or as actually required, suitable HP pump, pressure switch, valves, make up water connection, overall height of the tank shall be limited to 3.0 meter & the tank shall be complete with necessary controls etc. as required to make it fully functional. The capacity of each tank shall be 3000 Liters approx. Capacity of tank is for the guidance only & AC Contractor to quote as per actual requirement.
Hot Water Generator For Winter Heating / Monsoon Reheat
Supply, Installation, Testing and Commissioning of electrically operated modular type Air Source Heat Pump of following nominal capacity having Controller and Thermostat so that required qty. of hot water is generated at required temperature with nominal variation, including necessary electrical panel with automatic Controls including inlet and outlet connections and suitable for outdoor installation.Modular scroll type air source water heating machine; modules shall operate in master slave combination with automatic run time equalization between the modules. Suitable Nos & suitable capacity squirrel cage induction motor with class 'F' insulation suitable for operation on 415 volts +10% , 50 Hz, A.C. supply.
Capacity : 80 KW (For Space Heating)
Outdoor DB/WB temperature 20 Deg C/ 15 Deg C, initial water tank temperature 15 Deg C & Final Tank Temperature 55 Deg C, Minimum COP 4.59.The equipment shall be capable of operation from -20 to 43 Deg C DB ambient temperature
Capacity : 30 KW (For OTs)
Outdoor DB/WB temperature 20 Deg C/ 15 Deg C, initial water tank temperature 15 Deg C & Final Tank Temperature 55 Deg C, Minimum COP 4.59.The equipment shall be capable of operation from -20 to 43 Deg C DB ambient temperature
(1 No. standby Heat Pump included in above quantity)
Hot Water Pump Sets
Supply, installation, testing and commissioning of horizontal Inline hot water centrifugal pump sets with bronze impeller for hot water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The hot water pumps shall also include the cost of thermal insulation. Hot water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.
Hot Water Pump Sets (for OT)(1W+1S)
Capacity of Each Pump LPM 95 LPM (25 GPM)
Pump Head (Mt) 25.0
Motor HP 2.0 HP
AIR HANDLING UNITES WITH HEAT RECOVERY WHEEL (FOR OT'S)
Supply,installation testing and commissioning of factory fabricated Double skinned Floor mounted draw through type Air Handling unit made out of 25 mm thick panels with Heat Recovery Wheel section with Thermal break profile & mixing chambers , 0.8 mm pre-plasticized/precoated Galvanised steel sheet outside & 0.8 mm stainless steel sheet inside with 40 mm thick PUF insulation with density not less than 38 kg/Cum between them and Blower section .Blower shall be DIDW backward Curved blade (Plug fan, AMCA Certified with VFD) on supply side and DIDW forward curved blade on exhaust side .AHU shall be complete with Squirrel cage induction motor, starters for AHU with motor capacity less than 3 HP, cooling coil (Copper tubes and Aluminium fins 12-13 fin./inch,0.5 mm thick),Heating coil, pre-filter (Washable Synthetic fibre of efficiency 90% down to 10 micron), fine filter section with filters of non woven synthetic media of 5 micron particle size , Filter frame Flange type, drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 10 mm think closed cell polyurethene foam (PUF) insulation), V belt drive, fireproof double canvass connection and other accessories as per specifications (except water shut off valves, drain piping and pressure gauges which are covered under separate item). Motor shall be TEFC type of EFF-1 class & suitable for 415 ± 10% volts, 50 cycle, 3 Phase AC supply as indicated below. Hepa filter section with non woven synthetic media of 0.3 micron particle size with an efficiency of 99.99% . HRW efficiency shall not be less than 75 % ( equal efficiency both Sensible & Latent ), the Desiccant should be Molecular Sieve 3 Angstorm.The HRW sections shall comprise of inlet & outlet discharge with VCD, Sound level 75 db at the distance of 2 mtr.(maximum), etc. complete as per specifications and of following capacites.AHU shall include the cost of metering, power and control wiring between Control panel and Motor, wherever mentioned. Hepa filters shall be at terminals inside OT along with laminar flow plenum & not to be included in the cost . PCC/RCC foundation with plaster, Antivibration arrangement of cushy foot mountings etc. complete in all respect shall be in contractor's scope for floor mounted AHUs.
Fourth Floor , 3000 CFM Supply Air Blower @ 125 mm S.P & 3000 CFM Exhaust/Return air Blower @ 50 mm S.P ( 9 TR , 6 + 2 Rows deep cooling coil ) - OT 1 & OT -4(Septic OT) (Fan motor of Reqd. H.P rating )-5HP&3HP (100% Fresh Air)
Fourth Floor , 2500 CFM Supply Air Blower @ 125 mm S.P & 625 CFM Exhaust/Return air Blower @ 50 mm S.P ( 4.5 TR , 6 + 2 Rows deep cooling coil ) - OT 2,OT3,OT 5,OT6,Gynae OT and OT at Ground floor (Fan motor of Reqd. H.P rating )-5HP&1HP (25% Fresh Air)
AIR HANDLING UNITS (FOR ICUs & OTHER CRITICAL AREAS)
Supply, installation, testing and commissioning of double skin modular construction, draw through Sectional, Air Handling Units with 0.8 mm thick Stainless steel from inside and 0.8 mm thick preplastisized GSS from outside with 40 mm thick puf insulation in between them. AHU shall be complete with imported DIDW Forward / Backward curved Centrifugal fan (plug fan, AMCA Certified with VFD), Squirrel cage induction motor, starters for AHU with motor capacity less than 3 HP, cooling coil (Copper tubes and Aluminium fins 12-13 fin./inch, 0.5 mm thick), Heating Coil, pre-filter (Washable Synthetic fibre of efficiency 90% down to 10 micron), Filter frame Flange type, drain pan, V belt drive, fireproof double canvass connection and other accessories as per specifications (except water shut off valves, drain piping and pressure gauges which are covered under separate item). Motor shall be suitable for 415 ± 10% volts, 50 cycle, 3 Phase AC supply as indicated below. AHU shall include the cost of metering, power and control wiring between Control panel and Motor,AHU shall include the cost of fine filter. Fine filters shall be installed at the terminals inside OT.
Fourth Floor, post operative, 10000 CFM (FM) AHU, 25.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 7.5 HP/ 3 Phase motor
Fourth Floor, pre operative, 7000 CFM (FM) AHU, 18.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 5.0 HP/ 3 Phase motor
Third Floor, SICU 1, 2500 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Third Floor, ICCU, 2500 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Third Floor, MICU,ICU, 3000 CFM (CS) AHU, 4.5 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Second Floor, NICU, 2500 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Second Floor, PICU, 2500 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Second Floor, Nursery Clean, 2500 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
Second Floor, Nursery Septic, 3000 CFM (CS) AHU, 4.5 TR, 6 row deep cooling coil, 65 mm Static Pressure with 3.0 HP/ 3 Phase motor
First Floor, Post Operative Recovery Room, 1300 CFM (CS) AHU, 4.0 TR, 6 row deep cooling coil, 65 mm Static Pressure with 1.5 HP/ 3 Phase motor
Ground Floor, ICU, ICCU, 1200 CFM (CS) AHU, 4 TR, 6 row deep cooling coil, 65 mm Static Pressure with 1.5 HP/ 3 Phase motor
Ground Floor, Blood Bank, and Central Labs 6000 CFM (CS) AHU, 15 TR, 4 row deep cooling coil, 45 mm Static Pressure with 5.0 HP/ 3 Phase motor
AIR HANDLING UNITS (FOR OTHER AREAS)
Supply, installation, testing and commissioning of double skin modular construction, draw through Floor Mounted (FM) and/or Ceiling Suspended (CS) Air Handling Units of 0.6 mm thick Stainless Steel Sheet from inside & 0.8 mm thick Preplasticized GSS Sheet from Outside. AHU Shall be complete with DIDW Centrifugal fan (Plug fan, AMCA Certified with VFD) , starters for AHUs with motor capacity less than 3 HP, Squirrel cage induction motor, cooling coil (Copper tubes and Aluminium fins,12-13 fins/inch, 0.5 mm thick), pre-filter (Washable Synthetic fibre of efficiency 90% down to 20 micron), drain pan, V belt drive, fireproof double canvass connection and other accessories as per specifications (except water shut off valves, drain piping, Thermometer and pressure gauges which are covered under separate item). Motor shall be suitable for 415 ± 10% volts, 50 cycle, 3 Phase AC supply as indicated below.AHU shall incude the cost of metering, power and control wiring between Control panel and Motor.
Fourth Floor, Nurse Lounge and Staff lounge, 1300 CFM (CS) AHU, 4.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
Fourth Floor, Corridor, 4500 CFM (CS) AHU, 10.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3.0 HP/ 3 Phase motor
Fourth Floor, Sterile Corridor, 3200 CFM (CS) AHU, 8.0 TR, 4 row deep cooling coil, 50 mm Static Pressure with 2.0 HP/ 3 Phase motor
Fourth Floor, TSSU, 1500 CFM (CS) AHU, 3.5 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
Fourth Floor, Surgeon (Male and Female) 1500 CFM (CS) AHU, 3.5 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1 HP/ 3 Phase motor
Fourth Floor, Observation Gallery, 1800 CFM (CS) AHU, 4 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.5 HP/ 3 Phase motor
Third Floor, Lobby 1& 2, 1800 CFM (CS) AHU, 6 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.5 HP/ 3 Phase motor
Second Floor, Lobby 1& 2, 1800 CFM (CS) AHU, 6 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.5 HP/ 3 Phase motor
Second Floor, Lecture Theatre 3 & 4 , 4500 CFM (CS) AHU, 10 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3 HP/ 3 Phase motor
Second Floor, Library , 5000 CFM (CS) AHU, 11 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3 HP/ 3 Phase motor
First Floor, Surgeon M,F,Anesthetics Room etc, 3200 CFM (CS) AHU, 8.0 TR, 4 row deep cooling coil, 50 mm Static Pressure with 2.0 HP/ 3 Phase motor
First Floor, Passage & Waiting Lobby,TSSU, Corridor, 5000 CFM (CS) AHU, 15.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3.0 HP/ 3 Phase motor
First Floor, Enclampsia, 1300 CFM (CS) AHU, 4.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
First Floor, Observation Gallery, 1200 CFM (CS) AHU, 4.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
First Floor,Dissection Hall, 6000 CFM (CS) AHU, 15.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 5.0HP/ 3 Phase motor
First Floor, Lecture Theater 1& 2, 3200 CFM (CS) AHU, 9.5 TR, 4 row deep cooling coil, 45 mm Static Pressure with 2.0HP/ 3 Phase motor
First Floor, Library, 4800 CFM (CS) AHU, 10 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3.0HP/ 3 Phase motor
Ground Floor, Examination Hall, 5500 CFM (CS) AHU,16.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 5.0HP/ 3 Phase motor
First Floor, Sterile corridor, 1500 CFM (CS) AHU, 3.5 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
Ground Floor, CT Scan , MRI , X - Rays, IITV, etc 1300 CFM (CS) AHU, 4.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
Ground Floor, Common areas & Other areas, OT incharge, Xray 4500 CFM (CS) AHU, 10.0 TR, 4 row deep cooling coil, 50 mm Static Pressure with 3.0 HP/ 3 Phase motor
Ground Floor, Common areas and dressing rooms 4500 CFM (CS) AHU, 10.0 TR, 4 row deep cooling coil, 50 mm Static Pressure with 2.0 HP/ 3 Phase motor
Ground Floor, EME Ward Male/Female & Nurse Stations, 1800 CFM (CS)AHU, 6.0 TR,4 row deepcooling coil, 45mm Static Pressure with 1.5HP/3 Phase motor
Ground Floor, Observation, 1300 CFM (CS) AHU, 4.0 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0HP/ 3 Phase motor
Ground Floor, Waiting Lobby & Office, Police Room, 5000 CFM (CS) AHU, 15 TR, 4 row deep cooling coil, 45 mm Static Pressure with 3.0HP/ 3 Phase motor
Ground Floor, Sterile corridor, 1500 CFM (CS) AHU, 3.5 TR, 4 row deep cooling coil, 45 mm Static Pressure with 1.0 HP/ 3 Phase motor
TREATED FRESH AIR UNITS
The TFA shall be of double skin construction complete with filter, cooling coil and constant volume supply air fan sections.The unit shall be of uniform cross section throughout and free standing type.Construction shall be prefabricated individual framed sections bolted together with neoprene gaskets between to make a complete unit. All AHU's shall be ceiling suspended type. The AHU casing to have a "Penta-Post" perimeter frame with wholly be easily removable.Formed from galvanised sheet externally powder coated, rigidly reinforced with 50mm thick foam or fibreglass insulation. The outer skin of casing panels shall be of minimum 1.0mm thick galvanised steel sheet and the internal skin shall be of minimum 0.8mm thick Stainless steel sheet. All air handling units shall include thermal breaks on casing framework,and wherever required to prevent condensation on the casing.Thermal breaks shall be in the form of profiled rubber inserts between internal and external surfaces.TFA Shall be complete with DIDW Centrifugal fan (plugfan, AMCA Certified with VFD),starters for AHUs with motor capacity less than 3 HP , Squirrel cage induction motor, cooling coil (Copper tubes and Aluminium fins, 0.5 mm thick) TFA shall incude the cost of metering, power and control wiring between Control panel and Motor
First Floor, Common Area & Other Areas, 4500 CFM (CS) AHU, 18.0 TR, 8 row deep cooling coil,50 mm Static Pressure with 5.0 HP/ 3 Phase motor
Second Floor & Third Floor , Common Area & Other Areas, 5000 CFM (CS) AHU, 20.0 TR, 8 row deep cooling coil,50 mm Static Pressure with 5.0 HP/ 3 Phase motor
VARIABLE FREQUENCY DRIVE(VFD)
Variable Frequency Drive (VFD) with transducers, control wiring etc. as per specifications and drawings. (For AHUs above 2 HP ratings)
Fan Coil Unit (CC)
The complete fan coil unit shall have acoustically lined casing & shall be in line with the tender specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.
1.0 TR, 4 mm external static
1.5 TR, 4 mm external static
2.0 TR, 5 mm external static
2.5 TR, 5 mm external static
3.0 TR, 8 mm external static
FCU Valves and Copper Connection Set For Cooling Coil
Supply, installation, testing and commissioning of insulated copper connection set for chilled water line consisting of ball valve with strainer at inlet, ball valve at outlet, copper connection set with braided pipe flexible connector at in and out at one end etc excluding 2-Way PIBC modulating control valve (quantified separately) but provision of fixing it as required for smooth functioning of unit. Valves sizes shall be 25 mm up to 2 TR & 32 mm for 2.5 TR & above.
Thermostat for FCU
Supply, installation, testing and commissioning of automatic control for Fan Coil Units for cooling / heating consisting of pressure independant balancing cum two way control valve (already quantified herein) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Thermostats shall be interlocked to prevent simultaneous heating and cooling.
Digital Display Type Thermostat Cum Humidistat For AHU
For All OT AHU (T + RH Control)
Supply, installation, testing and commissioning of digital display, communicating type thermostat with humidistat for various air handling Units. The thermostat with built in / individual humidistat shall have provision of setting of space temperature & RH and shall display the both. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Temperature + RH Sensor for AHUs are also specified in BMS Part. Thermostat with built in humidistat shall be installed in case BMS commissioning is significantly delayed.
For All Other AHU
Supply, installation, testing and commissioning of Proportional cooling / heating, digital display, communicating type thermostat at air-handler. Temperature Sensor for AHUs are also specified in BMS Part. Thermostat shall be installed in case BMS commissioning is significantly delayed.
Supply, installation, testing and commissioning of Snap Acting, digital display, communicating type Humidistat at air-handler. RH Sensor for AHUs are also specified in BMS Part. Humidistat shall be installed in case BMS commissioning is significantly delayed.
Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil & Heating Coil For AHU & FCU)
Supply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:
15 mm Dia, Maximum 2.4 GPM
19 mm Dia, Maximum 5 GPM
25 mm Dia, Maximum 9 GPM
32 mm Dia, Maximum 15 GPM
40 mm Dia, Maximum 26 GPM
50 mm Dia, Maximum 54 GPM
65 mm Dia, Maximum 80 GPM
80 mm Dia, Maximum 125 GPM
Supply, installation, testing and commissioning of horizontal floor standing Ultrasonic Humidifier with casters made out of 1.2 mm thick SS-304 sheet complete with Piezo transducers duly interlocked with Level switches. Control Panel made out of 1.2 mm thick CRCA sheet comprising of Incomer MCB, Contactor, On/Off switch, step down transformer, ventilation fan, Power and control wiring. The Ultrasonic humidifier shall be equipped with solenoid operated water makeup, Drain valve, Water Overflow connection with valve, Mist outlet connection, Water and Air filter assembly, Level switches for upper and lower water level and other controls as per tender specifications. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. Humidifier shall comply the tender specification & of following capacities:
Inline Fans
1000 CFM (15mm static pressure, single phase)
1500 CFM (15mm static pressure, single phase)
100 - 200 CFM (8mm static pressure, single phase)
300 CFM (8mm static pressure, single phase)
400 -450CFM (10mm static pressure, single phase)
500 CFM (10mm static pressure, single phase)
600 CFM (10mm static pressure, single phase)
700 CFM (10mm static pressure, single phase)
800 CFM (12mm static pressure, single phase)
900 CFM (12mm static pressure, single phase)
1300 CFM (15mm static pressure, single phase)
1700 CFM (15mm static pressure, single phase)
Plastic Propeller Fans
Supply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc.
FAN SECTIONS
Supply, Installation, Testing and commissioning of single skin Fan Section as shown in drawing and as per specifications. Each unit shall be complete with casing (16G) DIDW centrifugal fan, belt drive, motor(EFF 1 class), Starters, metering, power and control wiring between Control panel and Motor etc, louvers etc. Fan motor shall be suitable for 3 Phase, 415 ± 10% V, 50 Hz AC supply.
Duty: Lift Well Pressurisation
Air Quantity : 23,000 CFM
Static Pressure : 40 mm wg
Motor Rating : 12.5 HP
Location : Terrace Floor
Duty: Lift Well Pressurisation
Air Quantity : 21,500 CFM
Static Pressure : 40 mm wg
Motor Rating : 12.5 HP
Location : Fifth Floor
Duty: Lift Well Pressurisation
Air Quantity : 11500 CFM
Static Pressure : 40 mm wg
Motor Rating : 7.5 HP
Location : Terrace Floor
Duty: Staircase Pressurisation
Air Quantity : 11500 CFM
Static Pressure : 40 mm wg
Motor Rating : 7.5 HP
Location : Terrace Floor
Duty: Lift Lobby Pressurisation
Air Quantity : 14500 CFM
Static Pressure : 40 mm wg
Motor Rating : 10.0 HP
Location : Terrace Floor
Duty: Staircase Pressurisation
Air Quantity : 12500 CFM
Static Pressure : 40 mm wg
Motor Rating : 7.5 HP
Location : Terrace Floor
Duty: Toilet Exhaust
Air Quantity : 3400 CFM
Static Pressure : 40 mm wg
Motor Rating : 2 HP
Location : Fifth Floor
Duty: Toilet Exhaust
Air Quantity : 4500 CFM
Static Pressure : 40 mm wg
Motor Rating : 3 HP
Location : Terrace Floor
AXIAL FLOW FANS
Supply, installation, testing and commissioning of direct driven Axial Flow Fans as shown in drawings and as per specifications. Each fan shall be complete with totally enclosed fan cooled motor EFF-1 (IP:55), Starters, metering, power and control wiring between Control panel and Motor etc., motor mount and vibration isolators. Fan motor shall be suitable for 3 Phase, 415 +/- 10% V, 50 Hz AC supply.(Motor speed shall not exceed 900 rpm). The Smoke Extraction Fan and its casing shall be suitable for smoke exhaust application and fan shall be AMCA certified. Motor shall be thermally rated for 250°C for 2 hours as per [BS-7346 Part-2 : 1990] Class-B
Duty :Normal Exhaust and Fresh Air for Basement (Zone-1)
Air Quantity : 20,000 CFM
Static Pressure : 40 mm wg
Motor Rating : 20 HP (Suggested)
Duty : Smoke Exhaust and Fresh Air for Basement in case of emergency (Zone-1)
Air Quantity : 20000 CFM
Static Pressure : 40 mm wg
Motor Rating : 20 HP (Suggested)
Duty :Normal Exhaust and Fresh Air for Basement (Zone-2)
Air Quantity : 28000 CFM
Static Pressure : 40 mm wg
Motor Rating : 25 HP (Suggested)
Duty : Smoke Exhaust and Fresh Air for Basement in case of emergency (zone-2)
Air Quantity : 28000 CFM
Static Pressure : 40 mm wg
Motor Rating : 25 HP (Suggested)
Duty :Normal Exhaust and Fresh Air for Basement (Zone-3)
Air Quantity : 22500 CFM
Static Pressure : 40 mm wg
Motor Rating : 20 HP (Suggested)
Duty : Smoke Exhaust and Fresh Air for Basement in case of emergency (zone-3)
Air Quantity : 22500 CFM
Static Pressure : 40 mm wg
Motor Rating : 20 HP (Suggested)
Duty : Smoke Exhaust for Common Area in case of Emergency
Air Quantity : 5,000 CFM
Static Pressure : 20 mm wg
Motor Rating : 3 HP (Suggested)
Duty : Smoke Exhaust for Common Area in case of Emergency
Air Quantity : 4,000 CFM
Static Pressure : 20 mm wg
Motor Rating : 3 HP (Suggested)
Duty : Fresh Air Supply for Common Area in case of Emergency
Air Quantity : 3200 CFM
Static Pressure : 20 mm wg
Motor Rating : 2 HP (Suggested)
Duty : Smoke Exhaust for Common Area in case of Emergency
Air Quantity : 6200 CFM
Static Pressure : 20 mm wg
Motor Rating : 5 HP (Suggested)
Duty : Fresh air for Common Area in case of Emergency
Air Quantity : 5000 CFM
Static Pressure : 20 mm wg
Motor Rating : 3 HP (Suggested)
Duty : Common Area Normal exhaust
Air Quantity : 2200 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.5 HP (Suggested)
Duty : Fresh Air Supply for Common Area in case of Emergency
Air Quantity : 4,000 CFM
Static Pressure : 20 mm wg
Motor Rating : 3 HP (Suggested)
Duty : Common Area Normal exhaust
Air Quantity : 3500 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.5 HP (Suggested)
Duty : Smoke Exhaust for Auditorium in case of Emergency
Air Quantity : 9,000 CFM
Static Pressure : 20 mm wg
Motor Rating : 5 HP (Suggested)
Duty : Fresh Air for Auditorium in case of Emergency
Air Quantity : 8,500 CFM
Static Pressure : 20 mm wg
Motor Rating : 5 HP (Suggested)
Duty : LT panel room Exhaust
Air Quantity : 2000 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.5 HP (Suggested)
Duty : LT panel room Fresh Air
Air Quantity : 1500 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.0 HP (Suggested)
Duty : Pump Room Exhaust
Air Quantity : 2500 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.5 HP (Suggested)
Duty : Pump Room Fresh
Air Quantity : 2000 CFM
Static Pressure : 20 mm wg
Motor Rating : 1.5 HP (Suggested)
AIR WASHER - DOUBLE SKIN
Supply, installation, testing and commissioning of double skin Air washer unit with starter and 200 mm thick impregnated cellulose paper media (Celdek pads) of imported Origin (Munter's make) of minimum 90% efficiency, factory assembled, distribution header, GI 'B' class piping, makeup, quickfill and drain connections, Butterfly/Gate valves for Pumps, make up, drain & quickfill connections of Sump, 2 Nos. pumps of suitable capacity (1W +1 S), Y strainers and necessary fittings etc.. The quoted price shall also include GI frame and supporting structure for Celdek pads, washable synthetic fibre filters (of 90% efficiency down to 10 micron) and SS(18 gauge) sump,TEFC Motor (IP:55) Control panel complete with necessary Switchgear, Starters, metering, power and control wiring between Control panel and Motor/Pump etc. & drive unit complete with Pulley, Belts, Fresh air Louvers with bird screen (GI Construction) etc as per specification. (Motor efficiency class EFF-1)
Duty: Kitchen Fresh Air
Air Qty : 8,000 CFM
Static Pressure : 50 mm wg
Fan Motor HP :5.0 HP(Suggested)
Pump Motor HP : 0.5 (Suggested)
SCRUBBER (DOUBLE SKIN)
Providing and fixing of Double skin kitchen DRY scrubber having 18 G G.I. sheet metal fan section,with powder coated 18 G G.I. sheet encloser, pre filter section for removal of oil grease, followed by intaks louvers, impingement plate section, Fan section, Carbon Filter for odor removal.
Duty: Kitchen Exhaust
Air Qty : 9,000 CFM
Static Pressure : 50 mm wg
Fan Motor HP : 7.5 HP
Pump Motor HP: 3.0 HP
UVGI (Ultra Voilet Germicidal Irradiation) System for OT & ICU
2,500 CFM to 5,000 CFM.
Above 5,000 CFM & Up To 7,500 CFM.
Above 7,500 CFM & Up To 10,000 CFM.
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
250 mm dia
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.
Providing and fixing in position the following Flexible coupling (with control rods) for the chilled/Hot water pumps.
250 mm dia
200 mm dia
150 mm dia
125 mm dia
40 mm dia
Providing and fixing in position the following water flow switch as per specifications:
32 mm dia
Providing and fixing in position dial type mercury-in-glass filled industrial thermometers
Providing and fixing in position the following Ball Valves with Strainer duly insulated as per specifications and drawings
32 mm dia
25 mm dia
20 mm dia
Providing and fixing in position the following Ball Valves without strainer duly insulated as per specifications and drawings
32 mm dia
25 mm dia
20 mm dia
Drain Piping
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Complete pipe shall be duly insulated with Closed Cell Elastomeric Nitrile Rubber of specified pipe section of specified thickness in the tender specification & suitable for indoor / outdoor application. Complete pipe insulation shall also have 200 g/m² factory laminated, treated woven Glass Cloth coating for mechanical and UV protection.
25 mm dia pipe, 13 mm Insulation
32 mm dia pipe, 13 mm Insulation
40 mm dia pipe, 13 mm Insulation
50 mm dia pipe , 19 mm Insulation
65 mm dia pipe, 19 mm Insulation
Providing and fixing in position the following Drain Valves (For Drain) duly insulated as per specifications and drawings
25 mm dia
20 mm dia
Providing and fixing in position the following Purge Valves duly insulated as per specifications and drawings
25 mm dia
20 mm dia
Auto Air Vent
Supply, installation, testing and commissioning of auto air vent valve of following sizes and complying with tender specification.
a) 10 mm dia auto air vent valve
b) 19 mm dia auto air vent valve
c) 25 mm dia auto air vent valve
Expansion Tank for Hot Water Circuit
Supply, installation , testing and commissioning of expansion tank for chilled water circuit of size 1.0mt x 1.0mt x 1.0 mt made out of 5 mm MS sheet duly epoxy coated & insulated as per specifications duly duly aluminium cladded with 22 G aluminum sheet complte with float valve, over flow & make up connections.
Burried Chilled / Hot Water Piping With TF Quality Expanded Polysterene Insulation & Sand Cement Plaster
Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled / hot water piping outside the building laid in the ground including earth excavation & filling as required (with necessary clamps and fittings but excluding valves, strainers, gauges etc.) duly insulated with following thickness TF Quality Expanded Polysterene of minimum 20 Kg / m3 density, thermal conductivity 0.035 (K.cal/ hr. degree C/m or better at 10 deg mean temperature covered with 500 gauge polythene faced hessian with 50 mm overlap, All joints sealed with bitumen, A layer of 0.50 mm x 20 mm G.I. wire mesh netting provided over it butting all joints and laced down with GI wire, sand cement plaster (1:4) 20 mm. thick provided in 2 layers of each 10mm and water proofed by applying hot bitumen & fixing tar felt over the plaster as per specifications and as required complete in all respect.
Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
250 mm dia. (75 mm thick insulation)
150 mm dia. (50 mm thick insulation)
125 mm dia. (50 mm thick insulation)
Condenser Water Piping
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
Note:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
400 mm dia
50 mm dia
Motorised Butterfly Valves
Manual Balancing Valves
Supply, installation, testing and commissioning of manual balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:
250 mm dia (For Condenser Out, Cooling Tower In)
Valves & Strainer
NON - RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
250 mm dia
Providing and fixing of Y strainer as per specifications of following sizes:
250 mm dia
Providing and fixing in position the following Flexible coupling (with conrtol rods) for the condenser water pumps.
250 mm dia
Providing and fixing in position the following water flow switch as per specifications:
32 mm dia
Acoustic Insulation of AC Plant Room
SITC Pre-Insulated Fiberglass wool Duct Board-Plus –R for duct thermal insulation is having 25mm thickness with both side factory laminated aluminum foil, outer facing foil is having - Reinforced aluminum + Kraft+ glass veil and inner facing foil - Aluminum + Kraft + glass veil. Duct Board Size: 1.19mtr (W) X 2.9mtr (L)
Site Fabricated Aluminium Ducting
Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Spliter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.
LAMINAR FLOW DIFFUSER
Supply, Installation, Testing and commissioning of laminar flow plenum as per drawing and specification. Plenum shall be of precoated GI sheets and openable from front and shall be made of 18 gauge Aluminium. It shall be insulated and have Aluminium volume control damper on each entry level. It shall have Aluminium perforated grills for air outlets.
Fresh / Exhaust air louvers with bird screen & damper
Volume control GI Dampers to be provided in supply & Exhaust air registers / terminals.
Fixed bar linear air register of following sizes
Under Deck Insulation of Exposed Roof
Supplying and fixing of thermal insulation on exposed roof (underdeck) with 13mm thick Cross Linked Closed Cell Polyethylene FR-XPE insulation of density 33 Kg/m³ with adhesive (pidilite SR -998) etc. as required & finally fixed with the help of rawl plug & dash fasteners in ceiling.
INCOMER
1 No. 1200 A 4 Pole ACB, 50 kA breaking capacity manual drawout type with microprocessor release.
METERING & INDICATION
1 set of R,Y,B phase indicating lamps
1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB
1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's
BUS-BAR
1 Set of 1400A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
4 Nos. 400A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for chiller.
3 Nos. 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle for HWG.
2 Nos. 30 KW Star Delta Starter with 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (for secondary pumps ).
4 Nos. 20 KW Star Delta Starter with 80A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle ( CONDENSER PUMP)
2 Nos. 15 KW Star Delta Starter with 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle for Secondary CHW. PUMP.
4 Nos. 7.5 KW Star Delta Starter with 40A TPN MCB 10KA for PRIMARY CHW. PUMP.
3 Nos. 7.5 KW Star Delta Starter with 40A TPN MCB 10KA for COOLING TOWER.
1 Nos. 400A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 100A TPN MCCB, 35 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 63A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle (Spare).
2 Nos. 63A TPN MCB (Spare).
3 Nos. 40A TPN MCB (Spare).
Supplying,Receiving, fixing, testing & commissioning of above described Panel
Supply of Aluminium Cables
Supplying of following 1100 volt grade XLPE insulated PVC inner sheathed and HR PVC outer sheathed aluminium conductor armoured cables as per specification.
3.5 Core 300 Sq.mm
3.5 Core 35 Sq.mm
4 Core 25 Sq.mm
4 Core 16 Sq.mm
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
All the items listed below shall include supply, installation, testing & commissioning.
Software and Operator Workstation
Host PC comprising core i7 processor or later, 3 GHz, 8.0 GB RAM, 1 TB HDD, DVD drive, 6 nos. USB Port, 18.5" SVGA color flat TFT monitor, keyboard, mouse and pre-loaded windows 8 operating system and anti virus software, Laserjet printer (A4 size, B/W)
Supply, installation, testing & commissioning of the following Web Based graphical Software. Providing facilities to create static & animate the graphics, navigation between the pages, display of logs, changing the time zones, popup alarms with single user license & point capacity as per I-O Summary with 20% spare points configurable password protection for the system and should be able to communicate with BACnet/M-BUS/LONWORK & MODBUS devices simultaneously. This software will act as web server & no additional license should require at client side.
Application Software for Building Automation System having facility to to exchange information using SQL database. Software shall have the features to calculate the total power consumption, total refrigeration load consumed on every day etc. Critical alarms generated in a day and its status should also be mailed along with daily report.
Supervisory Controllers
Network Area / Supervisory Controller for Building Management System (BMS). Network Area Controller Shall support Communication with AC Plant Controllers (DDC controllers) & Other Application Controllers on BACnet, Shall support Communication with Integrator Units as defined below on BACnet / MODBUS / LONWORKS. Router must be compliant with ANSI / ASHRAE 135-2012 (Rev. 1.10)
Direct Digital Controllers (BACNET / LON Type)
Stand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.
For Chilled water system - Chillers, CHW & CDW Pumps, Cooling Towers, HWG, HW Pumps & Headers etc. as required.
For Air Handling Units (Category A) as per IO Summary as required. (2 Nos. AHU with 1 No. DDC)
For Air Handling Units for OT as per IO Summary as required. (1 No. AHU with 1 No. DDC)
For All 3 Phase Fans - Fresh Air / Exhaust Air Fan, Airwasher, Scrubber, Pressurisation Fan etc. as required. (4 No. Fans with 1 No. DDC)
For Lift Well, Lift Lobby & Staicase Pressurisation Fans (4 Nos. Fans with 1 No. DDC)
Direct Digital Controllers (BACNET / LON Type)
Stand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.
For All 3 Phase Fans - Fresh Air / Exhaust Air Fan, Airwasher, Scrubber, Pressurisation Fan etc. as required. (4 No. Fans with 1 No. DDC)
Field instruments As Per I-O Summary
Immersion Temperature sensor with thermowell for Chilled water system (4 Nos. Chiller Outlet, 2 Nos. Chilled Water Header, 1 No. Condenser Water Return Header, 3 Nos. Hot Water Generator Outlet, 2 Nos. Hot Water Header)
Ambient air temperature and humidity sensor
Current relay for pumps (4 Nos. Primary CHW Pumps, 4 Nos. CDW Pumps, Excluding Pumps on VFD)
Differential pressure switch for various vent. fans excluding Inline & Propeller Fans
Differential pressure switch for AHU blower status
Differential pressure switch AHU Pre, Fine & Hepa Filter status
Temperature sensor for return temperature monitoring (Common for cooling / heating)
T + RH sensor for Temperature & RH monitoring
Integrators for third party systems on BACnet/MODBUS/LONWORKS/OPC/M-BUS and other industry standard Open protocols for the following Third Party Systems. Integrator should have dedicated one Lon, RS-485 & RS-232 Port with minimum of 96 MB storage.Integrator should be able to store trending to ensure gap free storage.The Third Party Integrator should be from the same manufacturer as that of DDC.
Chillers on BACnet/MODbus/LONworks
Variable Frequency Drives on BACnet/MSTP, MODBUS-RTU Over RS-485
Cabling and Conduiting
Communication & Signal Cabling 2C x 1.5 Sq. mm Shielded Tinned Copper Cable.
MS Conduit 25 mm for Signal & Communication Cable
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
AIR COOLED PACKAGED UNITS - SELF CONTAINED TYPE
Supply, Installation, testing and commissioning of Aircooled Packaged air conditioners each comprising a hermatic/ scroll compressor, air cooled condenser, condenser fan along with Cooling thermostats etc. with outer casing and indoor fan coil unit consisting of centrifugal fans, fan motor, DX cooling coil, outer casing, filter, control and power panel with remote etc. cabling and wiring, insulation and with full charge of refrigerant gas and oil, supports, canvas connection etc. complete as per drawings. The quoted price shall also include, Refrigerant charging, cabling, wiring, supports, cable tray, starter, MCB etc. from main panel to the unit.
20.0 TR (8300 CFM)
SPLIT UNITS
Supply, Installation, testing and commissioning of Aircooled split air conditioners each comprising an outdoor unit(s) consisting compressor, air cooled condenser, condenser fan along with Cooling thermostats etc. with outer casing and indoor fan coil unit consisting of centrifugal fans, fan motor, DX cooling/Heating coil, outer casing, filter, control and power panel with remote etc. cabling and wiring, insulation and with full charge of refrigerant gas and oil, supports, canvas connection etc. complete as per drawings. The inddor and outdoor units shall be with structural steel supports, angles, rods etc. The quoted price shall also include copper refrigerant piping from outdoor unit to indoor unit up to 5 meter complete with insulation, refrigerant charging, supports, clamps, fittings, connections, sleeves, cabling, wiring, supports, cable tray, starter, MCB etc from main panel to the unit.
Ductable Type
4 TR (1300 cfm)
8 TR (3400 cfm )
Cassette Type
3 TR (900 cfm )
Hi-Wall Type
Extra Refrigerant piping beyond 5rmt with insulation (Including refrigerant charging)
PASSENGER LIFT -
Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> B+G+3
Travel --> 16 Mtrs Approx.
Stops & opening - --> 5/900 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER CUM BED LIFT
Supplying, Installation, Testing & Commissioning of 26 Passenger (1768 KG) Cum Bed lifts (Gearless), MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> B+G+4
Travel --> 20.0 Mtrs Approx.
Stops & opening - --> 6/1200 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER CUM BED LIFT -
Supplying, Installation, Testing & Commissioning of 26 Passenger (1768 KG) Cum Bed lifts (Gearless), MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> B+G+5
Travel --> 24.0 Mtrs Approx.
Stops & opening - --> 7/1200 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Supplying, Installation, Testing & Commissioning of 2000 KG Goods lifts (Gearless), MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> B+G+5
Travel --> 24 Mtrs Approx.
Stops & opening - --> 7/1200 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> B+G+5
Travel --> 24 Mtrs Approx.
Stops & opening - --> 7/900 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 13 Passenger (884 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+5
Travel --> 20.0 Mtrs Approx.
Stops & opening --> 6/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+5
Travel --> 20.0 Mtrs Approx.
Stops & opening - --> 6/900 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+3
Travel --> 9.5 Mtrs Approx.
Stops & opening --> 4/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+7
Travel --> 22.1 Mtrs Approx.
Stops & opening --> 8/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT -
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+5
Travel --> 16.0 Mtrs Approx.
Stops & opening --> 6/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+6
Travel --> 18.9 Mtrs Approx.
Stops & opening --> 7/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> G+5
Travel --> 16.0 Mtrs Approx.
Stops & opening --> 6/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
PASSENGER LIFT
Supplying, Installation, Testing & Commissioning of 8 Passenger (544 KG) Lift geared MR / MRL having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-
Speed --> 1 MPS
Floors --> S+8
Travel --> 24.3 Mtrs Approx.
Stops & opening --> 9/800 mm WideX 2100mm High
Controller: A.C. variable voltage & variable frequency drive.
Automatic rescue device complete with dry maintenance free batteries as required.
Power-415 V, 3 phase, 50 Hz, 4 wires system
Type of doors
(i) Car Power operated, Two Speed Stainless Steel hail line finish. (SS 304 Grade)
(ii) Landing doors : Stainless Steel hail line finish. (SS 304 Grade)
Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car.
The Lift shall be provided with Brail System.
Ceiling as per manufacturer's standards with Fan & LED Lights.
On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided.
Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.
Cat6 wiring from Lift car to Lift machine room for IP based CCTV camera.
BMS connectivity for lift position & Intercom system.
Lift described as above
Add 18% GST
Add 1% Labour cess 1%
Venkataramane Gowda
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid