Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.6 CrAdmitted-Finance | -32.99% | ₹1.6 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.8 CrAdmitted-Finance | -26.53% | ₹1.8 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.8 CrAdmitted-Finance | -25.11% | ₹1.8 Cr | L3 | Admitted-Finance |
| 4 | L4₹1.8 CrAdmitted-Finance | -22.78% | ₹1.8 Cr | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | - | Rejected-Technical rejected |
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
26 Dec 2025, 4:00 pmClosed
Executive Engineer Construction Division kashmir
Executive Engineer Construction Division kashmir
Construction of seating tier, change room and allied works at Gassu Hazratbal Srinagar
2025_SPORT_298097_1
fresh NIT 59 of 2025-26
Open Tender
Civil Works
180 days
srinagar
Please refer Tender documents.
3 documents required · 3 mandatory
₹6,000
ex.engineer, CDK
₹4.8 L
Bakhshi Stadium
3 Feb 2026
13 Dec 2025
27 Dec 2025
13 Dec 2025
26 Dec 2025
18 Dec 2025
17 Dec 2025
Seating Tiers:- Earthwork in Excavation in Trenches by Mechanical means for foundation drains pipes etc.not exceeding 1.5mtr in width upto required depth (all kinds of strata)including dewatering of trenches if required during excavation and disposals of excavated earth beyond 50mtrs or as directed by Incharge Engineer at Site,/disposals earth is to be levelled and neatly dressed. complete job
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size
Aluminium bus barstrips with PVC sleeves
Strctural steel work welded in single sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats incl a coat of steel priemer
carriage of materials by M.T from source to site of work a) sand and stone aggregate for an average lead of 30 kms
Frequency Metre
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
LED lamp indicator
LED lamp indicator
Centering shuttering, strutting and propping etc and removal of form work in incl. all leads lifts, carriages and scaffolding etc complete job (a)(foundation etc).
Construction of Building:- Earthwork in Excavation in Trenches by Mechanical means for foundation drains pipes etc.not exceeding 1.5mtr in width upto required depth (all kinds of strata)including dewatering of trenches if required during excavation and disposals of excavated earth beyond 50mtrs or as directed by Incharge Engineer at Site,/disposals earth is to be levelled and neatly dressed. complete job
Plinth Protection: upplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure in plinth level upto floor level in 1:6 mix incl. curing complete including extra for Brick Work
Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete Fe.500 Grade (Comforming to IS:1786-1985) upto floor 5 level complete job incl. all carriages.
Half brick massonary 2nd class bricks with 1:4 cement mortar 6mm thick cement plaster in ceiling with 1:3 ratio
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16way,Doubledoor
15 mm thick cement plaster in walls in 1:6 sand and cement ratio internal as well as external
Supplying and Filling of Boulders under floors incl. ramming watering and carriages complete job
P/L of 50mm thick Cement flooring 1:3:6 mix (1cement: 3 coarse sand : 6 graded crushed stone aggregate 20 mm Nominal Size)
Providing and laying vitrified floor tiles of size 600x600mm (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to IS:15622 of approved make (Somany, Kajaria, Orient or equivalent) of approved colours and shades, laid on 20mm thick cement mortar 1:4 mix (1 cement: 4 Course sand) including grouting the joints with white cement and matching pigments etc complete.
P/F 1st quality ceramic glazed wall tiles conforming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour, shades of any size as approved by Engineer Incharge, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 Course Sand) and jointing with grey cement slurry @ 3.3 kg per sqm including jointing in white cement mixed with pigments of matching shade complete
Providing and fixing gang-saw cut mirror polished (Premoutned and pre-finished) machine cut for window sills, flooring, staircases landings etc of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) with joints treated with white cement, mixed with matching shade pigment including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels. (Granite of any colour & shade over 0.5 Sqm 18mm thick.)
providing and applying distember of approved brand in outer surface and smooth same as per above quantity
Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer (Birla White or equivalent) over the plastered wall / ceiling surface to prepare the surface even and smooth. Complete Job.
Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)
P&F in position stainless steel, (grade 304) railing made of hollow tubes, channels, plates etc. incl. welding, grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete incl. fixing the railing with necessary accessories and stainless dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the sides of waist slab with suitable arrangement as per approval of engineer incharge incl. stainless steel ornamental King Post as per requirement.
Bolister
Almunium work in doors and windows including shutter with all fittings as per Engineer in charge complete
Providing and fixing of glazing in almunium doors of thickness 6mm complete
lvalume plain sheet using incl. verticle/curved surface fixed with self drillen dash fasteners or polymer coated J or L Hooks, bolts and nuts 8mm dia with bitumen and GI Limpet washers excl. the cost of Purlins, rafters and trusses and but incl cutting to size and shape wherever required all complete.self drilling and self tapping fasteners of reputed make complete and as directed. the contractor shall have to provide a minimum 5 years warantee for sheets against deterioration, disintegrations loss of luster, variation in colour shade etc. and leakages across laps, fasteners etc. all types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-In-Charge.
Providing and fixing Tile Profile precoated galvalume profile sheets 0.53mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fastners of reputed make and fixing flashings, valleys and ridges of colour coated ga
b)Pillars, piers, abutmols, post, struts
c) Lintel Beams, plinth beams, girders and catiliners
d) suspended floors, foufs landing
Multi function Meter
Providing and fixing of soffits of Thickness 3mm made out of M.S sheet angle iron of requires size and guage including cutting welding and fixing in position including applying a priming coat of approved steel primer and two or more coats of steel paint and scaffolding carriage complete job.
Carriage of material a) stone aggregate and sand 30 Km by MT
6 mm thick cement plaster in walls in 1:3 sand and cement ratio internal as well as external
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
Structural steel work welded in built up section, trusses and framed work incl. cutting, hoisting, fixing in position and applying steel priming coat of approved brand incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and etectrical charges complete job (upto floor V-level). (MS Tubes)
P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size
Centering shuttering, strutting and propping etc and removal of form work in incl. all leads lifts, carriages and scaffolding etc complete job (a)(foundation etc).
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure in plinth level upto floor level in 1:6 mix incl. curing complete including extra for Brick Work
Providing and laying in position cement concrete of speacified grade excluding the cost of shuttring all works upto plinth level in 1:3:6)( 1 cement: 3 coarse sand: 6 graded stone crushed aggregate 20mm Nominal Size
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job. 7
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: a) One urinal basin with 5 liter white P.V.C automatic flushing cistern.
b) carriage of bricks 30 Km by MT
12 mm thick cement plaster in walls in 1:6 sand and cement ratio internal as well as external
Fencing Wall: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
P/F stainless steel AISI 304 (1818) Kitchen Sink as per IS: 13983 with CI Brackets and stainless steel plus 40mm incl painting of fittings and brackets, cutting and making good the walls whereever necessary (610x460) bowl depth 200mm
Providing and fixing of toilet paper holder CP brass
P/f of PTMT for wash basin and sink
P/F of towel rings
P/F of PMPTP glass for glass shelves incl. all fittings
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
Sanitary Fittings and Disposals System:- Providing PPR Concealed Pipes with PPR Fittings, clamps cutting chases and making good the wall (A) 32mm Dia
(B) 25mm dia
Covered Drain: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
Covered Drain: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
Supply of goal post one pair for futsal incl cost and carrige complete as per directions of Engineer cimplete job
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
(B) AC Brass BIB Cock 15mm Long Nose
P/F of CP Angle Valve 15mm dia Concealed type
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Sanitary Fittings:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
providing and finxing of soap holder incl. all fittings
P/F C.P PMPT grating including all fittings
P/F of following PVC Pipes & Fittings of standards quality & make (b Type) prince or equivalent incl. Jointing/Testing complete (A) 100mm dia
(B) 75mm dia
P/F of following PVC Pipes & Fittings of standards quality & make (b Type) prince or equivalent incl. Jointing/Testing complete (A) Door Junction (100x100x75mm)
Door Bend(75mmx75mm)
P-Trap (100 mm)
Floor Trap(100mm)
Plain Bend 100mm
Plain Bend 75mm
P/F of looking mirror of superior glass (of approved quality), rectangular size (450x350mm) with plastic molded frame of approved make and shade with 6mm thick hard board backing.oval shape
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
P/f of unplastisized PVC pipes
P/F of C.P Brass fittings of standards quality and make (Jaquar or eq.) (A) AC Brass BIB Cock 15mm nominal size
single core cable in surface/recessed medium class PVC conduit, with modularswitch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulatedcopper conductorsinglecorecableetc.asrequired. Light Point
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
P/F of approved quality and make 50 litres capacity gyser (Venus or equivalent) including all necessary fittings nuts bolts and C.P tubes complete.
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-20 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge
Parking area: Earthwork in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30m in depth, 1.5 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth lead upto 150 mtrs and lift upto. 1.5 mtr, as directed by the engineer incharge incl. filling the excavted earth in low lying areas of the field incl. ramming, dressing, watering and finally rolling with PRR and levelling the whole area of the field and disposal of surplus excavated earth beyond 150 mtrs lead- All KInds of Soil.
Supply and laying of GSB (Granular Sub Base Course ) incl. spreading, levelling and consolidation with PRR of 8-10 Tonne capacity upto required gradient camber not exceeding 50mm in depth incl. all carriage complete job.
P/F of wall Mixer of approved quality
S/F of stone soling hand packed on level incl. filling the intersections by Khak Bajri incl. consolidation with Power Road Roller 8-10 Tonne Capacity to achieve maximum density with all carriages complete
P/L wet mix macadam on prepared sub grade/subbase with crushed querry stone agg. Of specified grading as per IRC/MOST specification incl. mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass which is spread and rolled with vibratory roller 80/100 KN capaciy speed of which should not exceeed 5KM/hour for each layer, rolling should continue till 98% density is achieved to approved grrade and X-section the mixing is to be prepared in approved mech, mixing plant of suitable capacity incl. cost of all materials, all leads, lifts charge taxes. etc.
Providing and applying tack coat using hot straight run bitumen of grade 80/ 100Including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc. and finally booming the surface as per specifications.On W.M.M.@ 0.75 Kg/sqm
Providing and laying 50mm. thick, Premix bituminous Macadam base course with stone agg. of quality size and grading as specified in MORTH and streaightrun Bitumen of grade 80/100 at 3% by weight of Total mix at 60kg/Cum incl. hot mixing of stone agg. and bitumen in Hot Mix plant, transportation and laying mixed material with pavoer finisher to the required level and grade incl. rolling with PRR of 8-10 Tonne capacity to acheive the required compaction and density incl. cost and carriage of Tar and allied materials involved complete
Providing and laying 25mm thick Semidence bituminous concrete using material aggregate satisfying the gradation set out in specification with 5% binder content (by weight of total mix) bitumen of grade 80/100 @2.88Kgs/sqm with the aid of hot mix plant and paver finisher including rolling with 8-10 tonne capacity to achieve the require compaction and density (with bitumen 80/100) including rolling & finishing complete (including cost & carriage of tar & allied materials involved complete.)
P/L and compaction 6mm thick seal coat of prec mixed fine aggregate passing 2.36mm and retained on 180micron seive with bitumen 128kgs of bitumen of grade 80/100 bitumen per cum of fine aggregate (0.768kgs/sqm) 0.6cum of fine aggregate per 100sqm of road surface incl. rolling and finishing complete as per Morth specification incl. rolling and finishing complete (incl. cost and carriage of tar and allied materials involved complete).
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size
Earth work in excavation in trenches by mannual mean incl. disposal of excavated earth beyond 50 Mtrs or as directed by Incharge Engineer at sie, disposed earth is to be levelled and neatly dressed.
P/F G.I. chain link fencing of required width in mesh size50x50 mm incl. strengthening with nuts bolts and washers as required as per directions of engineer in charge (made of G.I wire of 4 mm) incl carriage by mechanical transport upto site of work
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats including one coat of steel primer on chain link fencing
point
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
Structural steel work welded in single section, incl. cutting, hoisting, fixing in position and applying priming of approved steel primer complete. incl. all carriages complete.
50mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete
centering and shuttring incl. strutting, propping etc and removal of form work for foundation,footing, plinth, columns , beams and slabs etc
Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
P/L in position cement Concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level (a) 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone Crushed aggregate 40 mm nominal size)
P/L in position cement concrete of specified grade excl. the cost of centering and shuttering all work up to plinth level 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20mm Nominal Size
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 and 20 mm stone size aggregate including curing but excluding the cost of centering and shuttring all works upto the plinth level
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation,foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5
Earthwork in Excavation in Trenches by Mechanical means for foundation drains pipes etc.not exceeding 1.5mtr in width upto required depth (all kinds of strata)including dewatering of trenches if required during excavation and disposals of excavated earth beyond 50mtrs or as directed by Incharge Engineer at Site,/disposals earth is to be levelled and neatly dressed. complete job
Supply and fixing of illuminated high quality signage Acryclic board with writing mentioned as J&K SPORTS COUNCIL incl Name of play field as approved by engr incharge incl logo incl necessary wiring design as per directions of engineer incharge.
Pathway:- Supplying and Laying of Stone Soling (Hand Packed) in Trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts carriages etc complete job.
S/S,filling of good quality sweet earth in layers not exceeding 20cm in depth incl. breaking of clods, watering, rolling each layer with 1/2 tonne roller and rolling every third and top most layer with PRR of 8-10 tonne capacity and levelling, dressing of ground incl. of all carriage upto site of work complete.
Supply and laying of GSB (Granular sub bas cours incl spreading leveling and consolaation with PRR of 8 to 10 ton capacity upto rquird level and incl all carraige complt job
Supply and stac
Providing and laying in position specified grade of reinforced cement concrete in 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone crushed agg. 20 mm nominal size) but incl. cost and carriages of all materials involved
Providing and fixing of fencing Ms gate including primer painting complete job
king of graded stone agg moorum an ston screening 13.2mm nominal size (type B) including laying of water bound macdam with spcifid ston Agg ston screening and binding matrial including screening sorting spreading to templat and consolidation with power road roller of 8 to 10 capacity etc completed with all leads and lifts and carraige upto site complted base course (G2) with 6-45mm crushd stone agg and ston screening 13.2mm agg
Constructing masonry (60x60x75 cm) Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid.
P&L wet mix macdam on prepared sub grade /subbas with chrused querry stone agg of soecified grading as per IRC/MOST specification inl mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass whih is sprea an roll with vibratory roller 80/100 KN capasity speed ofv which should not exceed 5km /hr for each layer rolling should continiue till 98% ensity is achived to approved grade and x setion th mixing is to b prepared mh mixing plant of suitable capaity inl cost of all materials all leads and lifts complete job
supply of volly ball post set of standard qaulity and make made of heavy duty 75mm round steel pipe with telescopic height adjusment provided with wheels for smooth shifting and levellers to adjust high on uneven surfaces complete job incl all appicable taxes royalties lavies etc complete job
Fan Point
Exhaustpoint
Supplying and fixing of following modular switch socket on the existing modular plate and switch boxincluding connections but excluding modular plate etc as required 5/6ASwitch
3 pin 5/6socketoutlet.
Supplying and fixing suitable size GI box with modularplate and cover in front on surface or in recess,including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modularswitch,connections etc. as required. (For light plugs to be used in non residential buildings).-Duplex Switch Socket
Supplying and fixing suitable size GI box with modularplate and cover in front on surface or in recess,including providing and fixing 3 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch,connections etc. as required. (For light plugs to be used in non residential buildings).-Triplex Switch Socket
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connections etc. as required. (Combo 5A +16A Switch/ Socket)
Supplyand fixing of Energyefficient5/4 Star rating50 Litre storage water heaters /Gysers complte in allrespects of stnadard make like Racold/Venus/Haveel/Essel Venus Lyra 25R 2000-Watt Water Heater(White/Purple, BEE Star Rating – 5 Stars), Orient Electric Aquabliss Plus 25-Litre Vertical Storage WaterHeater (White)- BEE 5 Star Racold ETERNO Pro SP 25V 2kW IV. For 5Star ratingStandingLosses(KWh/24 hours/45oC-lessthanorequalto0.742KWH)
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulatedcopper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2X2.5sq.mm+1X2.5sq.mmearthwire
2X4sq.mm+1X4sq.mmearthwire
2X6sq.mm+1X6sq.mmearthwire
Supplying and fixing 20 A, 240 V, SPN Industrial typesocket outlet, with 2 pole and earth, metal enclosedplug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chainedmetal coverforthesocketoutletandcompletewithconnections,testingandcommissioningetc.asrequired.
Supplying and fixing PVC conduit as required confirming to IS 9537 (Part-3), ISI marked along withaccessories on surface etc. as required:PVC conduit 25 mm. (MMS)
SubMainCables. Wiringforcircuit/submainalongwithearthwirewiththefollowingsizeofFRLSPVCinsulatedcoppor conductor , single core cable insurface/recessed mediumclassPVCconducitasrequired:(32/40 mmconducit) 1Rx4C X6 sq.mm+2CX6 sq.mmearth wire earthwire earth wire.
1Rx4C X10 sq.mm+2C X6 sq.mmearth wire earth wireearth wire
Cable end termination of the copper conducor single core wires of 1.1KV volatage grade including supplyingand fixing of bimetallic crimping lugs :4C X 6 sq. mm + 1C X 6 sq. mm earth wire earth wire earth wire ckt.)
Copper busbar strips with PVC sleeves
SubDistributionBox/MCBBox Supplyingandfixingfollowingway,horizontal typethreepoleandneutral,sheetsteel,MCBdistributionboard, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Note:2 No pre fabricated vertical Floor Distribution Panel/BoardsDistribution Boardsare to be installed per flloor8way(4+24),Doubledoor,TPNDoubledoorIP43protectionwithoutMCCB/MCB
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable forinductive load of following poles in the existing MCB DB complete with connections, testing andcommissioning etc. as required. -(6/10A MCB )rating, for Outgoing cktfrom LDB's to Switch Boardwired on 2.5 mm2 conductor .
Supplying and installing of RCBOs (Residualcurrent circuit breaker with overload and short circuit protection)ISI marked complete as per I.S. standard conforming to IEC:61009-1 & IS:12640-2, 240/415V 50 Hz with 10kAshortcircuitwithstand capacity for earth leakage,overload &shortcircuitprotection including connectionin existing enclosure in approved manner as per specification. 4pole25-32Amp, 30mA sensitivity
4pole63Amp, 100m/30mA sensitivity
Supplying and fixing 5A to 32 A rating, 240V 10 kA, “C” curve, Doublepole miniature circuit breaker suitablefor inductive load of following poles in the existing MCB DB complete with connections, testing andcommissioning etc. as required
Supplyof ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuitindication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supplyconforming to IS : 8828 : 1996,IEC : 60898 :2002 & 60947-2 but without enclosures :- Supplyof ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuitindication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supplyconforming to IS : 8828 : 1996,IEC : 60898 :2002 & 60947-2 but without enclosures :-MCBFP50Ampto63 Amp10kArating
MCBFP6Ampto 32Amp10kArating
Light FixturesandFans LED Panellight 1x1 ft.(Systemlumenefficacy≥120<135 lm/Watt) Supplying,installation,Testing &Commissioning ofPanel light1x1 ft.,(36 watt) offollowing body materialand constructio
n as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operatingvoltage AC 140-270 Volt,freq50/60hz,Operatingtemprange-15degto40degcentigrade, internalsurgeprotectionof2.5KVwithShort&Opencircuitprotection,THD<10%,P.F.≥0.95,IP20,CRI>80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electricalcircuitry),of minimum50000 Burning Hours with , 70% of initialLumenmaintainedtilllifeends,CCT3000°K/4000°K/5700°K/6000°K/6500°K(Asper ANSIBin),SDCM(Standard Deviation ColorMatching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be ofrelevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. completeinallrespecti/cconnectionswith1.5sqmmFRLS,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEMwarranty.System lumen efficacy ≥120<135 lm/Watt output . LM79 & LM80 Test reportfromNABLlab foralltestingrequiredforLED fixtures as per BISshallbe submitted. Shape size and CCT shallbe asapproved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminiumhousing such that LED junction temperature shall not rise above 90°C).
LEDDownlighter(SMDType)(System lumenefficacy≥120<135lm/Watt) Supplying,installation,Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/Rectangular) SMD typeof following body material with PMMA and prismatic diffuser andconstruction as per IS : 10322 with driver as per the requirement with Driver efficiency>85%, Operatingvoltage AC 140-270 Volt, frequency 50/60 hz,Operating temp range-50Cto400C centigrade,internalsurgeprotectionof2.5KVwithShort&Open circuit protection ,THD < 10%, P.F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flickershould be below 5%), life time(LED, Driver & electrical circuitry), life time of minimum50000 Burning Hourswith70%ofinitialLumenmaintainedtilllifeends, CCT3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(StandardDeviation Color Matching) <3, Maximum power consumption should not more than the specified rating andFixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screenprinting on housing Complete inallrespecti/c external connectionswith1.5sqmmFRLS/HFFR, PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEMwarranty. System lumen efficacy≥120<135 lm/Watt output . LM79 & LM80 Test report and all testingrequired for LED fixtures as per BISshall be submitted.. Shape size and CCT shall be as approved byEngineer-in-Charge as per requirement. (Thermalmanagement:heat sink of aluminium housing such thatLED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Bodyincludingtrim. 12 -15 watt
Supplyand fixing recessed mounting 18/20WLED Slim Tube Light , LED of 1 to 3 Watt each assembled onsingle MCPCB, havingcolor temp upto 6500K &having 50000 burning hrs. life with minimum @ L 70,system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% &surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made ofpressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete thejob.20-18 Watt, color temp 3000-6500k as required
LEDBattenlight (Systemlumenefficacy≥120 <135lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following bodymaterial and construction as per IS : 10322 withdriver (Replaceable) as per the requirementwith Driverefficiency >85%, Operating voltage AC140-270 Volt,freq 50/60 hz, Operating temp range -15 deg to 40deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20,CRI>80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electricalcircuitry),ofminimum50000BurningHours with,70%ofinitialLumenmaintainedtilllifeends,CCT3000°K / 4000°K / 5700°K /6000°K/6500°K(AsperANSIBin),SDCM(Standard Deviation Color Matching) <3,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BISstandardandtrade markcertificate(T.C.)
. Manufactures Word Mark/ Name Engraved/ Embossing/Screen printing on housing. OEM must have its own inhouseNABLlabsetupforall testing facilities forLED fixtures. complete in all respect i/c connectionswith1.5sqmmFRLS,PVCinsulatedcopperconductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.Systemlumen efficacy≥120 <135lm/Watt output . LM79 & LM80 Test reportfromNABLlabforalltestingrequiredforLED fixtures as per BISshall be submitted. Shape size and CCT shall be as approved byEngineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminiumhousing such thatLED junction temperature shall not rise above 90°C). Powdercoated18-22watt diecast/Extrudedaluminium Body(Thickness≥1.20 mm)
Powdercoated12-14watt diecast/Extrudedaluminium Body(Thickness≥1.20 mm)
Supplying, erecting and testing of approved make Exhaust Fan of 400 mm,900 rpmwith mounting frame,blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. completefinished of approvedas required.ust have CRCA body having following technical specifications with allaccessories including connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable i/changing arrangement with chain and wiring with GI flexible conduit with coupler (from ceiling surface to falseceiling surface) if necessary and earthing as required.
Supply, Installation, Testing and Commissioning ofceiling fan with Brush Less Direct Current (BLDC) Motor,class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shacklekit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W)minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than10%, remote (preferably mobile app based)for speed control and all remaining accessories including safetypin,nutbolts,washers,temperature rise=75 0C (max.),insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c externalconnections with 1.5 sq.mm FRLS/HFFR, andearthingetc.asrequired. 1200mm, service value ≥6.0 CM/Min/Watt,air delivery210CM/Min (Minimum)
1400mm, service value ≥6.0 CM/Min/Watt,air delivery245CM/Min (Minimum)
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switchbox including connectionsbut including modular plate etc. asrequired completein all respects.(for ceilingfanspoints)
Supplying, fixing and testing of approved make LED bulkhead ABS body, PC diffuser including fixing on wallas required, with necessary material complete 10WIP55
Earthing System Providing earthing stations at locations as called for Earthing with copper earth plate 600 mmX600 mmX3mm thick including accessories, and providing masonry enclosure with cover plate having lockingarrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 Meterbelow ground levelfor conductor earth electrode,including connection/ termination with GI thimble etc. as required
Providing and fixing 25 mmX5 mmG.I.strip onsurface or in recessfor connectionsetc.asrequired.
MainLTCables Supplyof XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade,3½ core/4 core ISIMARKED with Alu. Stranded /solid conductore.3½ CORE ARMOURED( The final quantity shall bepayable as per requirement as site) 1Rx3.5corecX70mm2Armoured XLPE Aluminumcable
Laying of one number armoured /unarmoured power cable 1.1.KV grade of size exceeding 25sq. mm butnot exceeding 120 sq. mm direct in groundincluding excavation in all soil/ murrum /soft rock, sandcushioning, protectivecovering and refilling the pit etc. as required.
Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cablewith alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switchgear/bus/M.C.C.B./M.C.B. etc. as requiredcomplete. 70sq.mm
6mmto16sq.mm
Area Lighting LED FloodLight,powdercoatedpressurediecastaluminium(Systemlumenefficacy≥120 and<135lm/Watt). Supplying,Installation,Testing&CommissioningofFloodLight,powdercoatedpressuredie castaluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Inputvoltage: Input voltage: 140-270 Volt AC, frequency50/60 hz, Operating temp range -5 0C to 50 0C, internalsurge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95,IP-66,IK-10,CRI >70,undervoltageandovervoltageprotection,EMI-EMC as perCISPR-15, lenses for beamangle 30 deg-120deg as per the application and the project requirement, suitabletilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initialLumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K /5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5,Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be of relevant BIS standardcompleteinallrespecti/c external connectionswith1.5sq.mmFRLS/HFFR,PVCinsulatedcopperconduc
tor single core cable and earthing etc. as required with Minimum5 year OEM warranty. Systemlumenefficacy ≥120and<135lm/Wattoutput.LM79&LM80TestreportandalltestingrequiredforLEDfixtures as per BISshall be submitted.. Shape size and CCT shall be as approved byEngineer-in-Charge asper requirement. (Thermalmanagement:heatsinkof aluminium housing such that LED junctiontemperature shall not rise above 90°C) 70 W
Miscelleneous Works : Supplying & fixingof fire extinguisher/refills as per IS specification Miscelleneous Works : Supplying & fixingof fire extinguisher/refills as per IS specification Supplying, Installation Testing & Commissioning of ISI marked CO2 gas type Fire Extinguisher of 4.5 kgcapacityconforming to IS: 15683:2018 made from Seamless Cylinder conforming to IS 7285, fitted with ISImarked Control Valve Conforming to IS:3224 discharge adopter complete with initial gas charged with carryinghandleandwallmountingbracket etc.as reqd.
Supplying, installation, testing and commissioning of ISI marked ABC stored pressure type fire extinguisher of6 kg capacity consisting of welded cylinder, squeeze lever discharge valve fitting with pressure indicatinggauge with internal discharge tube, discharge nozzle, suspension bracket conforming to IS:15683:2018 dulycharged, with ISI marked mono Ammonium Phosphate base ABC powder conforming to IS:4308 andpressurized with nitrogen gas etc. as required.
Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5sq.mm FRLS/HFFR PVC insulatedcopper conductor
Supplying&fixingoffireextinguisher/refills as perISspecification4buckets setwithsand,self-supported M.S. stand i/cshed dulypaintedwith redcolourasper IS.
Supplying & fixing of 25 Kg TrolleyABC Type Fire Extinguisher,wheeled dulypainted with redcolour as perIS.
4bucketssetwith sand,self-supported M.S.stand i/cshed dulypainted with red colour asper IS.
OnlineUPS-Inputsupply:SinglePhase,OutputSupply:SinglePhase. 34.1 3kVA Supplying,installation,Testing&Commissioningoffollowingcapacityatfullload(UnityPowerFactor) ON LINE Uninterrupted Power Supply(UPS) system suitable for Single Phase input,Single Phase outputACSupply.TheUPSshallincludeaRectifier,inverter,batterybanksuitablefor30minutesbackup(BatteryVAHcapacityshallnotbe less than 1600 VAH per KVA ofUPS rating per Hour backup time) on fullload (Batteryshallbe VRLA,SMFin ABS Container) and Static Bypass switch along with provision for manualbypass,suitable isolation transformer for additionalprotection againstneutralfaults etc.The UPS systems shallbeMicroprocessorbasedDigitalControl,usingInsulatedGateBipolarTransistor(IGBT)'sbothfortherectifier&inverter with PWM(Pulse Width Modulation) Technology.The qualityofdesign,manufacturing and inspectionprocess should confirm to the relevantInter-nationalstandards such as IEC/EN/VDE.The operating efficiencyofthe UPS systems shallbe >95% at100% non-linear loads.Currenttotalharmonic distortion(ITHD)/totaldemand distortion (TDD) on the inputgridshallbe< 5% at100 %load.(The required LCfilters shallbeincludedinUPScost),extremepowerfactorkittobeincludetolimittheinputpfto0.99andoutputpowerfactorshallbe unity(i.e.kwrating ofthe UPS shallbe kva rating x 1 ) however UPS shallbe suitable to take load at 0.7 laging to 0.7 leading power factor loads.UPS shallbe suitable for incoming supplyAC single phase 160-270V 50 Hz and delivering outputAC supplytrue sine wave single phase 220/230/240 Volt,50 Hz +/- 0.2Hz,Overload capacityof120% for 10 mins and 150% for 1 minute.Operating temperature0 to 40 0C,Relativehumidity0-95% non condensing,noise levelless than 60db at1 meter distance,Protection for Under voltage,over voltage, abnormal output voltage, battery over charging, output over current, short circuit, battery deepdischarge ,10 KVsurge.Displayforwatt/VA,Amp and Voltage powerparametersetc.UPSshallcomplywithlowvoltage electromagnetic compatibility(EMC) achieved as per EN 6204,EN6204 PartIand Part2,itshallbe a Voltage and FrequencyIndependent(VFI) type UPS (as per standard IEC 62040-1,2 & 3) .The UPSshouldbewithIGBTBasedInverterTechnology,CommunicationRS232/RS485/SNMPportopenprotocolforBMS integration as per approved byEngineering in charge. Required batteryracks, DC breaker of suitableratingandinterconnectingcopperconductorcableofsuitablesizeandconnectorsandallrequiredaccessoriesare inclusive in the cost.The UPS should have QR code which should contain drawing,testreportOEMmanual, Geo- Tag of manufacturing location etc
FIREDETECTIONANDALARMSYSTEM(CONVENTIONAL) Supplying & laying of 2x1.5 sqmmfire alarmarmoured cable, 600/1000V rated with annealed copperconductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete asrequired.(Qty as per execution)
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cumfixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting basecomplete with all connections etc. as required
Supplying, installation, testing & commissioning of manualcallbox of ABS type in surface/recess withstainless steel chain & hammer assembly complete with glass and push button etc. as require
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having twoLEDs metallic cover complete with all connections etc. as required.
Supplying, installation, testing & commissioning fire alarmsounder with facilityto make announcement,mounted in A.B.S. box with hinged cver plate & suitable for operation with amplifier i/c line matchingtransformer etc. complete as required.
SPLITAC(SPLITAC(Invertermodel,Heating&Coolinginvertermodel):- Supply, installation,testing and commissioning of Split type wall mounted air conditioning unit of followingcapacityincluding indoor, outdoor unit fitted with inverterbased rotary compressor, copper condenser and firstchargerefrigerantR410A.Thecondensingunitworkingrangeshouldbecapableforprovidingcooling between +/-5 deg. C to 50 deg. C & heatingwithin 0 deg. C to 15 deg. C including connection ofcopper pipe of requiredsize upto 3 mtr., insulation,cordless remote control, auto air swing louvers, wallstand for outdoor unit,connectioncopperleadwire,condensedwateroutletpipe2mtr.completeetcasrequired.Outdoor/indoorunits should be of same make (brand). 1.5 TRstarrating 3star
Supply, installation, testing and commissioning of single phase 5 kVA automatic voltage stabilizer of reputedmake ngineer, with input of 90 Volts to 235as input range andoutput of 195-245 volts dully fitted on wallswith necessary dash fasteners including making of necessary connections
Centring and shuttering incl strutting propping etc and removal of form work for walls (any thickness)
Incomer Main service In comer: Incoming:200A TPN Aluminium busbar strips with PVC sleeves
Supplying of ISI marked and approved make of moulded case circuitbreaker (MCCB) suitable for 3 phase &N, 4 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal-magnetic release having respectivebreaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2 MCCB 25kA current rating - 125Amp & adjustable overload setting 80% -100% of In, adjustable shortcircuit setting 6-10 In 4 Pole
Outgoing to Floor SMDB,s Distribution Panels: MCBDPFor40Amp 10kArating
MCBDP50Amp to63Amp 10kArating
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
BOQ_966204.xls
BOQ • 0.61 MB
Download all tender documents and submit your bid