PROVN OF GAURD ROOM AT MITRA CAMP AND ADDN/ALTN TO SEWAGE LINE AT GUND UNDER GE (I) 873 EWS

Amount

B/R Portion

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

All as per Srl item No. 5 here-in-before but except bricks.

Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in in CM 1:4, complete all as specified and directed.

RCC M-25 design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

RCC M-25 (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

RCC M-25 (design mix) in chajjas, complete all as specified and as directed.

Plain cement concrete 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.

Mild steel TMT bars 10mm dia and over, cut to length bent to shape including binding with with and including MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 6 to 8mm dia as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

Sand filling under floors including watering, ramming and rolling, complete all as specified.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and as directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 Square metre but not exceeding 0.36 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:6 complete all as specified.

2nd class hard wood (Sal/Hollock) plain, solid, straight chowkats/frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, with one or more rebates, complete all specified.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Steel windows with side hung shutter including projected type hinges with steel handle and steel peg stay with glazing bars, complete all as specified and as directed by Engr-in Charge.

Steel windows with side hung shutter including projected type hinges with steel handle and steel peg stay without glazing bars, complete all as specified and as directed by Engr-in Charge.

Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified.

Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 100mm ISI marked and fixed, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, anodised of size 100mm and fixed, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Figured glass, pin headed type, 3mm thick and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified.

Stainless steel wire cloth 0.36 mm nominal dia of wire and aperture 1.40mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

25mm dia MS curtain rods of 1mm wall thickness in one length as per door/window, designed and colour shall be as approved by E-I-C, fixed with MS bracket of suitable size, with and including knobs, complete all as specified & directed.

Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, complete all as specified.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.

Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, GI, medium grade, 32mm dia waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, complete all as specified.

Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, 5 ltr cast iron automatic flushing cistern including bracket, flush pipe including 32mm bore PVC waste pipe, complete all as specified.

Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with and including shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms, complete all as specified.

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.

PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified.

Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia, complete all as specified.

Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75mm, complete all as specified

Soap dish, brass chromium plated, complete all as specified and directed.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. confirming to grade FE 410-0 complete all as specified and directed.

Mild steel rolled work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Non asbestos fibre cement building board 6mm thick of size 600mm x 600mm as in ceiling fixed with screws on and including Galvanized Iron angle of size 25mm x 25mm x 3mm thick with main runner ‘T’ section of size 25mm x 40mm x 3mm and secondary runner ‘T’ section of size 25mm x 30mm x 3mm thick and 3mm dia galvanized iron wire 4mm dia suspended with grid of size 605mm x 605mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion (combination of two shade / colour / pattern) over a coat of cement primer complete all as specified and as directed including making holes, cutting chases and making good the disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 type B-1 as per the existing finish, complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Gun-metal, globe or gate valves of 25mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified.

Stop valves, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed.

Preparation new plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of putty, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Salt-glazed stoneware drain pipe, internal dia of pipe 150mm, laid in trenches and jointed, complete all as specified

Plain cement concrete 1:4:8, nominal mix, type D-2 (40mm graded aggregate) as in bed of drain pipe including packing under and haunching against the side of pipe after they are laid and tested for 150mm bore pipe, complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching, internal dia of pipe 150mm, complete all as specified.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., as in manholes, septic tanks, soakage pits etc, complete all as specified.

Plain Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 200mm, complete all as specifed & directed.

Salt-glazed stoneware drain pipe, internal dia of pipe 200mm, laid in trenches and jointed, complete all as specified

Plain cement concrete 1:4:8, nominal mix, type D-2 (40mm graded aggregate) as in bed of drain pipe including packing under and haunching against the side of pipe after they are laid and tested for 200mm bore pipe, complete all as specified.

Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed.

Mild steel TMT bars 6 to 8mm dia, cut to length bent to shape including binding with with and including MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching, internal dia of pipe 200mm, complete all as specified.

E/M Portion

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in existing rigid PVC concealed conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 82 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 82 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 82 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm all as specified and directed.

Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed.

Switch piano, flush type, 15 Amps, single pole, one way, complete all as specified and as directed.

Socket 5 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Socket outlet combination universal type, 2 in 1, 6 pin 5 and 15 Amp, piano flush type, 230 volts, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Electronic fan regulator stepped type with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan including taking out the unserviceable, complete all as specified and as directed.

Wall surface mounted tube light fitting 18/20 watt LED with electronic driver and extrude aluminium heat sink integrated polycarbonate LED channel with white acrylic cover and including 1X18 watt LED tube rod and complete accessories , internally pre- wired including connection cable of copper conductor size 3-core ,23/0.0076 passing through PVC flexible conduit from ceiling rose to light fitting connector complete all as specified and as directed by Engineer-in-Charge. Make :- CROMPTON Cat No LCTL-18-CDL OR HAVELL's Cat No LHEXBLP7UN1W018 OR BAJAJ Cat No BLRBDB118

Surface mounted LED bulk head light fitting 9/10W, IP66, operating voltage 220-240 V in high pressure die cast aluminum housing in polycarbonate cover with clear prismatic diffuser and lamp holders etc complete with all accessories connected with twin core twisted flexible copper wire of suitable size, complete all as specified & directed. Make: Crompton Cat Part No. LBHP-10-CDL or equivalent in models of Philips/Bajaj/Wipro/GE/Surya

Ceiling Fan 1200mm sweep, five star energy saving BEE rating, and making connection with three core 23/0.0076 size twisted flexible copper conductor cable upto ceiling rose complete all as specified and directed. Make : Havells / Bajaj / Usha / Crompton / Khaitan.

Exhaust fans (metal body) AC single phase 230/ 240 V of size 300 mm sweep 900 RPM with louver including cutting of hole of adequate size including making good existing surfaces with and including fixing with MS fasnut all as specified and directed Make- Havells model Turbo Force or equivalent in Crompton/Bajaj

Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 6 Way, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA 'C' Series, complete all as specified and as directed.

MCB SPN 40 Amp 10 KA 'C' Series, complete all as specified and as directed.

1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

M S BANSI LAL CONSTRUCTION CO

M/s Wani Builders

Bidder Name

M S BANSI LAL CONSTRUCTION CO

M/s Wani Builders

M/S Bilal Ahmad Wani