ADDN ALTN TO OFFRs MD ACCN AT NGV KORMANGALA UNDER GE CENTRAL BANGALORE

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris outside MoD land and depositing where directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 4 here-in-above but exceeding 1.5 Sqm but not exceeding 7.5 Sqm each

Taking down shutter of any description exc 1Sqm but not exc 2 Sqm each and stacking at site where directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar , stacking serviceable slbs at site and removal of entire debris as ordered outside MOD land complete all as directed.

M & L for PCC 1 :5 : 10 type E2 using 40 mm graded crushed stone aggregate as in foundation filling, sunken repairing & mass concrete complete all as specified and directed

M&L for cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall).

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 6 sqcm and not exc 13 sqcm all as specified & directed

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

S&F in repais for 18-20 mm thick MDF Board both side decorative face cut to size & fixed as in cupboard / wardrobe partition , shutters , cabinets , Drawers etc including 4 mm thick teak wood lipping alround complete all as specified and as directed .

S&F powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed

S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S & F 200 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 200 mm size extruded aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 25mm dia stainless steel matilic coated type curtain rods with rings complete all as directed.

S&F brass chromium plated type curtain brackets suitable for 20 mm dia curtain rod along with wooden support complete all as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and as directed

S & F 2 lever mortice lock suitable for drawer of size 50mm complete all as specified

M&L for Magnetic / Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 600mm long between flanges complete all as specified and directed.

S&F stainless steel wire cloth 0.24 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified.

S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing the same with neat cement slurry with 3.0 Kg of cement per Sqm complete all as directed.

M & L for applying evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm for suken floors.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in padding / levelling course / subbase of floor etc floor and finished the surface even & rought complete all as directed.

M & L non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all directed and specified.

M&L coloured glazed ceramic tiles of size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 33 & 34 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over and including 15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rate is deemed to be inclusive of cement screed.)

M&L for grinding of the existing Terrazzo/Marble/Kota stone flooring by mechanical process using Carborundum stone of appropriate grit, cleaning and removing of all stains and greasy spots and finally mirror polishing by applying wax polish complete all as specified in SSR Part-I and as directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface as in ceiling,chajja,roof projection etc. finished the surface even and smooth without using extra cement complete all as specified.

M & L for Rendering 15 mm thick in cement mortar 1:4 on brick / stone or concrete surface mixed with WPC @ the weight of minimum 3% by weight of cement mixed or as per manufacturer instruction , and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC measured and paid separately.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as ordered complete all as specified.

All same as per item No 40 here-in-above but on ceiling -do -

Complete removal of any type of exixting treatment from walls surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as specified complete all as specified.

All same as per item No 42 here-in-above but on ceiling -do -

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified

S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

M & L One coat of 1st quality synthetic enamel paint on old wooden surface of any description over 10 cm in width or girth including necessary preparation of old wooden surface complete all as directed.

M & L One coat of 1st quality synthetic enamel paint on old steel surface of any description over 10 cm in width or girth including necessary preparation of old steel surface complete all as directed.

Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed.

S&F in repair 15mm dia cast copper alloy Bib taps fancy type , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed.

S&F in repair chromium plated bib tap sink cock regular spout with flange complete all as specified Each 7 1500.00 and directed.(Make Prayag (Laguna) Cat No 9316 or equivalent) complete all as directed.

S&F in repairs 15mm bore Stop valve /Angle cock , fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No P6812 or equvelent of Make Hindware/Parryware/CERA

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified & as directed

S&Fin repair health faucet ABS body with wall hook and 1.5 metre long SS braided rubber hose pipe and wall hook mounted type complete. Make: Prayag Cat No BEA-40 or equivalent in approved make.

S&F in repair CP soap dish, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws complete all as directed.

S&F in repairs mild steel chromium plated grating 125mm dia of weight not less than 50gm with or without waste hole fixed to existing floor trap / Nahani trap with white cement complete all as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as directed

S&F 300 mm size Corner Shelf with 5.5 m or more thick glass with chromium plated bracket guard and railing , fixed on wall with PVC rawl plug & cadmium plated brass screws,complete all as directed.

S&F in repair Vitreous China Wash hand basin with pedastal white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, pillar taps, brass, with capston heads, fancy type, chromium plated, 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of basin CERA Cat No S2040105 or equivelent of Parryware/Hindware/Prayag

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 560mm x 460 mm with bowl size 510mm x 405mm x203 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink (Make: Prayag Cat No 1322D or equivelent of Parryware /Hindware/Cera)

&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond

S&F in high density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of 50 mm laid in trenches in floors complete all as specified and directed

S & F in repair PVC Waste pipe of size 32/40mm dia for WHB/Sink complete all as specified

S & F in repairs PVC connection pipe with PTMT nuts, 450mm long complete all as specified

S&F in repair bathroom mirror cabinet (PTMT) of size 430 x 330 mm fixed on wall with cadmium plated brass screws all as directed. Make :- Prayag (Cat Part No. 551) or equivalent of Commander (Jasmine) / Polytuf / Jindal / Parryware

S & F in repair brass chromium plated shower rose of 100 mm size suitable for 15 mm bore of fixed complete all as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wall in repars complete all as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wall in repars complete all as directed.

S&F 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.

S&F 75 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.

E&M : Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing taken down materials to a place where ordered for crediting including making good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as directed..

Taking down old un servceable DB's / Main switches any capacity complete all as directed.

Taking down old un servceable MCB's, SP/SPN / TPN complete all as directed.

Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit (Medium Grade) concealed in wall conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :-(a) One light / Fan / bell point controlled by one 5 Amps switch one way

(b) One 3 pin socket point 5/6 Amp on independent board

(c) One 3 pin socket point 5/6 Amp on same board with other switches.(to be provide new point as user reqairment)

(d) One light point contrlled by two, two way switchs , single pole

All as per item No. 76 here-in-above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed.

S&F Modular switch 1 way 6 Amps,1 module 240 Volts AC complete all as directed.

S&F Modular switch 2 way 6 Amps,1 module 240 Volts AC complete all as directed.

S&F Modular type socket combination , 16 Amps 240 volts AC , 2 module , suitable for inserting 3 pin 6 Amps / 3 pin 16 Amps plug top all as specified and direced .

S&F Modular type socket combination , 6 Amps 240 volts AC , 2 module , suitable for inserting 2 pin 6 Amps / 3 pin 6 Amps plug top all as specified and direced .

S&F Modular type 1-way Bell push switch , 1 module 6Amps 240 Volts AC complete all as directed.

S&F electric calling Bell Ding Dong AC 230 Volts, single pole / Multi Music type

S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals 240 Volts AC , ISI marked, including supply and fix PVC square mounting block complete all as specified and directe

Supply and fixing lamp holder, PVC / Polycarbonate type (angle/batten) with back plate suitable for batten fittings, complete all as specified.

S & Fstepped type electronic modular fan regulator 2 -moudle , madular type , 2 Module 230 volts AC fixedcomplete all as directed.

S & F in repair PVC Modular white cover plate with frame, 2 module make as per existing complete all as directed.

S & F in repair PVC Modular white cover plate with frame, 3 module make as per existing complete all as directed.

S & F in repair PVC Modular white cover plate with frame, 4 module make as per existing complete all as directed.

S & F in repair PVC Modular white cover plate with frame, 6 module make as per existing complete all as directed.

S & F in repair PVC Modular white cover plate with frame, 8 module make as per existing complete all as directed.

S & F in repair PVC Modular white cover plate with frame, 12 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 2 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 3 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 4 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 6 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 8 module make as per existing complete all as directed.

S & F in repair Modular metal flush box , 12 module make as per existing complete all as directed.

S & Fstellar bright 10 watt , B-22 LED ., T-shape bulp 230 V, PF not less than 0.85(min) complete all as directed.

S&F 10 Watt , 6000K, 230 Volt, 2ft Batten surface and wall mounted LED batten with aluminium extruded channel powder coated par glare free light with PVC housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. . Make : Havells/wipro/surya/ Philips

S&F20 Watt , 6000K, 230 Volt, 4ft Batten surface and wall mounted LED batten with aluminium extruded channel powder coated par glare free light with PVC housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. . Make : Havells/wipro/surya/ Philips

S&F sheet metal enclosures for DB's horizontal type double door in wall / nitch for housing MCB's to be used Single pole and neutral, 12way double door ,415 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F MCB SPN 'C' series 32-40 AMP 240/415 V , 50 HZ, 10KA repturing capacity complete all as directed.

S&F MCB SP 'C' series 240 V , 50 HZ, 10K repturing capacity , suitable for lightning and other domestic load Rating 6-32 A complete all as directed.

Taking down old existing sub main wiring and provide new submain wiring with 2 runs of 4 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit of size 20/ 25 mm dia concealed in walls etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 4 Sqmm cable , one run 4 Sqmm cable and one run of PVC shall be measured as one unit length) .

All as per item No 108 here-in-above but 2 runs with 6 Sqmm single core cable and 6 Sqmm single core as earth contunity wire -do- . (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmm cable and one run of PVC Conduit shall be measured as one unit length)

Taking down defective / unservicable any size & type of ceiling fan after necessary electrical disconnection & Supply and fixing new ceiling fan 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE Five Star rated with brushless direct current motor (BLDC) suitable for 230 Volts, 50 Hz, AC supply with down rod , electronic regulator with remote , pair of battries suitable for remote & canopy including provision of fan hook in ceiling for fixing of ceiling fan including necessary electric connection with 1.5 Sqmm, three core, flexible copper multistranded conductor cable as per manufacturers instructions & testing on completion to entire satisfaction of EIC & as directed. (Note : The taken down fan shall be deposited to MES E/M Store without any extra cost to Govt.)

M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding & reassembling complete all as directed.

Taking down defective / unservicable any size & RPM of exhaust fan after necessary electrical disconnection & Supply & fixing and testing exhaust fan of 300mm sweep heavy duty, double ball bearing, 1400 RPM, metalic body , suitable for SP 230 / 240 volt, 50 Hz AC supply complete with louver shutter including fixing in exsiting position & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan finally making good the disturbued surface of walls both internal & external to its original specifications to the satisfaction of Enginner-in-charge complete all as directed. Make : Havels Turbo Force SP or equivalent oin Bajaj/ CG / Orient / Usha as approved (Note : The taken down fan shall be deposited to MES E/M Store without any extra cost to Govt.)

Taking down defective / unservicable any size & RPM of exhaust fan after necessary electrical disconnection & Supply & fixing and testing exhaust fan of 200mm sweep plastic ventilation type body , double ball bearing, plastic body , suitable for SP 230 / 240 volt, 50 Hz AC supply complete with louver shutter including fixing in exsiting position & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan finally making good the disturbued surface of walls both internal & external to its original specifications to the satisfaction of Enginner-in-charge complete all as directed. Make : Havels Turbo Force SP or equivalent oin Bajaj/ CG / Orient / Usha as approved (Note : The taken down fan shall be deposited to MES E/M Store without any extra cost to Govt.)

Taking down any type and size of Geysers fixed in any description after necessary water connection & Supply & Fix new Electric water heater 5 Star rating glass line Inner tank plastic outer body PUF insulation of 25 litre storage capacity operating on single phase 230V , AC Supply along with hot & cooled high pressure pipes heavy duty branded PVC connection pipe of size 600 mm long & pair of 15 mm dia heavy duty PVC connections minimum 450 mm long suitable for both inlet & outlet hot water fixed with brass adopter / union washer both sides fixed as per manufacturers instructions , making necessary connections & testing on completion complete all as directed. (Note :(i) The old geysers & its accessories shall be deposited to E/M Store yard with out any extra cost to Govt. (ii) Quoted rate is deemed to be inclusive of, 600 mm long PVC connection pipe & Pair of PVC connections).

Taking down ceiling fan dismantling,preparing the surface & painting of ceiling complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire including wring existing MES Fan No on painted surface in Black paint , replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refixing in same making necessary connection& testing on completion complete all as directed. Note : The repair work of subject work is to be carried out in Offr's Md Accn in NGV Kormangala area , the tenderers to note that the working hours is limited i.e no work shall be permitted to execute between 1300 hrs to 1500 hrs , no working after 1700 hrs , no working on Sundays & National holidays further the work is to be executed upto a height of seventh floor as such all safety precatuions such as safety belt , scaffoldings as per relevant IS and as as directed by Engineer-in-charge shall be made available to working people by the contractor , the quoted rate is deemed to be inclusive of above no extra shall be entertained at later date. Please note that with out proper safety equipments labourers will not be permitted to work.

docileworx (BID ID -3150906)

D NAGI REDDY (BID ID -3150418)

K. VENKATESH NAIDU (BID ID -3155168)