REPAIR TO FLOORING, JOINERY, TILING, PLUMBING, BRICK WORK, RENDERING, MODULAR KITCHEN AND SANITARY FITTINGS INCLUDING PERIODICAL SERVICES IN ZONE II AREA OF AGE B/R III OF GE(SOUTH) MEERUT CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified

Material and labour for 25mm thick cement concrete 1:2:4 type B0 (using 12.5mm crushed stone agg) finished rough for laying of floor etc complete all as specified and directed

Taking down existing aluminium door exc, 01 Sqm but n.exc 4 Sqmand carrying out all necessary repair work including tightening , adjusting and replacement of hinges of size 125mm, screw, aluminium tower bolt of size 150mm (Two Nos) brass mortice lock 75mm size and refixing in the same opening complete all as specified.

Supply & fix in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type complete all as specified & directed.

Material & labour for 12mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balance with white colour lamination fixed with screws to timber frame work such as in kitchen/bath cabinets etc. including 1mm thick PVC lipping fixed in repair complete all as specified and directed.

Supply & fix continuous (piano type) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

Supply & fix 40mm dia cup board knobs fixed with nut, screws and washers of mild steel, brass polished complete all as specified and directed.

Taking down steel rolling shutters (hood cover, shaft ) of size exc 5 Sq.M but not exc. 15 Sq.M and refixing including, greasing, oiling to complete rolling shutter including minor repair, replacement of rusted nuts, bolts etc and making good the disturbed surfaces complete all as directed

All as per item No 9 above but size exceeding 15 Sq.M but not exc 30 Sq.M

Material & labour for 18/19mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balance with white colour lamination fixed with screws to timber frame work such as in kitchen/bath cabinets etc. including 1mm thick PVC lipping fixed in repair complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

Material and labour for providing pre-cast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in 35 mm thick jallies, louvers etc of design & pattern as directed with plain faces and set in cement mortar 1:4 complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick cement screed in CM 1:4 all as specified and directed.

All as per serial No. 16.00 here-in-before but cement in skirting / dado including 10 mm thick backing plaster in CM 1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Material & labour for granite stone slab 15 to 18mm thick of any shade including grinding/moulding and polishing fixed over as in floor/wall, kitchen platform etc including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed.

Material and labour for 60 mm thick coloured rubber moulded comparising of red & yelow colour in the 60:40 ratio interlocking pavers in approved design confirming to IS 15658-2006 M-35 grade set laid over 25mm thick coarse finesand and all as specified and directed.

Material & Labour for 20 to 22 mm thick designer tiles of design as approved by GE of any size and pattern laid and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed

Material & labour brick work with fly ash bricks built in CM 1:6 with sub class B, bricks straight or curved on plan exeeding 6m mean radius complete all as specified and as directed by Engr-in-Charge.

All as per item No 23 above but except bricks complete all as specified and directed.

Material and labour for brick work with Fly ash bricks straight or to any radius in half brick thick wall built in Cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster from brick walls or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description complete all as specified and directed.

Material & labour 10mm thick rendering in CM 1:3 on concrete surfaces on ceiling finished even and smooth using extra cement complete all as specified

Material & labour 15mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed.

Material and labour for preparing of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Dismantling ceiling boards of any description and any thickness including cover fillets.

Materials and labour for provision of powder coated Aluminium framed work (snap grid) suitable for size as in false ceiling of size 600mmx600mm consisiting of following :- i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS:737-1986. ii) The snap grid consist of aluminium anodised main/cross tee of size 36.5mmx25mmx1.40mm thick and 25mmx25mmx1.40mm thick respectively,iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 4mm dia mild steel GI wire iv)The main and cross tees shall be jointed at junction/crossings with aluminium anozied angle bracket,of size 15mmx15mmx1.40mm thick fixed with suitable mild steel, bolts,nuts and washers all as manufacturer's instructions v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mm x 25mm x 1.4mm thick vi) Size of the snap grid shall be 605mm x 605mm vii) Minimum average thickness of powder coating shall be 50 micron complete all as specified & directed.

Supply and fix 7 to 8 mm thick Gypsum Board in ceiling size 60cm x 60cm fixed to aluminium snap gird complete as per manufcturer"s instructions complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & labour 20mm thick rendering in CM 1:4 mixed with water proofing admixture as per manufacturer's instructions on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified (WPC shall be measured and paid seperately)

Material & labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 ltr per Sqm as per manufacturer’s instructions

Supply only liquid water proofing admixture complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof covering omplete all as specified and directed.

Material and labour fibre cement sheet 6mm thick corrugated or semi corrugated fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed

Material and labour fibre sheet cement 6mm thick two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed in roofs with J or L hooks complete all as specified & directed

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed.

Supply and fix MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

Supply and fix of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm as specified and directed

Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Dismantling structural steel work incl doors gates in any position all directed by Engibneer-in-Charge

Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of steel grade Fe-290, E-165

Taking down chowkats or frames with shutters (without taking of shutters from the frames) not exceeding 1.50 Sqm each

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm Each

All as per Item No. 52 above but area n.exc.1.0 Sqm each complete all as specified and directed.

Supply and fix 2nd class hard wood plain framed pannelled shutter (Two/three panels) rail and style of 2nd class hard wood 35mm thick, panel of 12mm veneered particle board kiln seasoned and chemically prerssure treated the size of rails and style as per IS 1003 (Part-I) complete all as specified and directed.

Supply and fix 2nd class hard wood glazed and sketon door shutter 35 mm thick open rebated and prepared to receive glass/gauze (without sash bars) divided into square with plain, chemfered or rounded, mitred and rebated sash bars the size of menbers of shutters as specified in SSR Part-I section 8 Clause 8.24 (a).

Supply & fixing 30mm thick flush shutter solid core construction with block board and plywood face panels, commercial type on both sides complete all as specified and directed.

Material & labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Material & labour for Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement complete all as specified & directed.

Supply & fix butt hinges stainless steel 100mm with steel screws complete all as specified and directed.

Supply & fixing mild steel framed work such as grills, grating,gauge etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.

Supply & fixing butt hings medium weight cold rolled mild steel 100mm long complete all as specified and directed.

Supply & fixing Mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame complete all as specified and directed

Supply & fixing Mild steel pressed handle 125 mm in size oval type stove enamelled black fixed complete all as specified

Supply and fix Mild steel tower bolts of 150mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Supply & fixing, Mild steel sliding door bolt having 300mm long 16mm dia with and including 1 minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified

Supply & fix 150mm long aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply & fix 300mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed

Supply & fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, with overall length of cover plate 150mm long, fixed in floor complete all as specified and directed.

Supply and fix in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple, steel windows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12 x 5 mm complete all as specified and directed

Supply & fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of apertures 1.18mm and fixed with tinned tags or galvanised wire stapples complete all as specified and directed.

All as per Item No. 71 above but fixed in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix steel ventilator with top/side hung shutter including hinges, steel peg stay incl taking taking down old one complete all as specified and directed.

Supply and fix in repair 2nd class hard wood glazed and skelton window shutter 30 mm thick open rebated and prepared to receive glass/gauze (With sash bars) divided into square with plain, chemfered or rounded, mitred and rebated sash bars the size of menbers of shutters as specified in SSR Part-I section 8 Clause 8.24 (b) and complete all as specified and directed

Material and labour preparation of new wooden surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..

Supply & fix in repair 25mm dia fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

Demolition & breaking up drain pipe (PVC/AC/salt glaze ware) of 100mm/75mm dia complete all as specified and directed

Supply and fix 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed

All as per item No 80.00 above but 75mm dia bore pipe complete all as specified and directed

Supply & fix in repair 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix in repair PVC (SWG) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) bends fixed to wall/floor with clamp complete all as specified and as dircted be Engr-in-Charge.

Supply & fix in repair 75mm bore PVC (SWR) junction (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 100mm dia CP grating complete all as specified and directed.

Supply & fix in repair 125mm dia CP grating with hole for waste pipe complete all as specified and directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store bore of pipe 15mm

All as per item No 90 but 20mm bore of pipe complete all as specified and directed.

Cutting chases, priming in making good to facing when required and pointing in CM 1:3 to ends for concealed water tubing and making good n exc 10 cm girth in brick wall complete all as specified and directed.

Supply and fix 15mm in repair bore GI tubing medium grade with all fittings and fixed to walls or laid on floor complete all as specified and directed

All as per item No 93 above but 20 mm bore complete all as specified and directed

Supply & fix in repair vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets as in repair and 32mm dia chromium plated waste coupling and down pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair pillars taps , cast copper alloy with capstan heads CP screwed down high pressure, with or without 'Hot or Cold' with long screwed shanks and fly nuts , screwed for iron pipe 15 mm bore complete all as specified and directed

Supply & fix in repair vitreous china squatting pan "Orissa" pattern of size 580X440mm white with integral footrests excluding flushing cistern but including connection to trap and cistern flush pipe and making good disturbed surface of floor complete all as specified and directed.

Supply & fix PVC dual flushing cistern 10ltr capacity with double flush button Cat Part No. - C-002 Pearl/ CAT Part No B 1020101 Cera or equivalent in Jaquar complete all as specified and directed

Supply & fix in repair 15mm dia angle valve, cast copper alloy, chromium plated of superior quality complete all as specified and directed.

Supply & fix in repair PVC connection of 15mm bore 450/600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Supply and fix in repair waste pipe PVC 32/40mm all as specified and dirceted

Supply and fix in repair Stop cock 15mm bore cast copper alloy CP screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

Supply & fix in repair 15mm dia CP bib taps of superior quality with long body cast copper alloy with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

Supply & fix in repair CP brass 75mm dia shower rose with or without swival joints with arms suitable 15mm bore pipe complete all as specified and directed.

Supply & fix in repairs, stainless steel plate rack of best quality, made out of 0.80 mm thick stainless steel sheet, of size 75x60x25cm with all internal fittings complete all as specified and directed.

Supply & fix in repair, sink with drain board made of stainless steel 1.00 mm thick for kitchen fixed with plug, washer, chromium plated brass waste fitting and PVC waste pipe including bedding in cement mortar on to dwarf wall or fixing on cantilever brackets and connecting union to pipes, overall size 915mmx420mm, bowl size 410mmx 330mm x160mm complete all as specified and directed.

Supply & fix rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling and removing existing PVC water storage tank all as specified and directed

Supply & Fix in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Material and labour Precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab shelves etc set in cement mortar 1:4 complete all as specifed and directed

Supply & fix 100mm size aluminium anodized hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate fixed with screws all as specified and directed.

Supply & fix in repair continuous (Piano) hinge, mild steel bright finish or electro galvanized, width of flap (when open) 30mm complete all as specified and directed.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair plastic seat cover for water closet, white closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed. by Engineer-in-charge.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply & fix in repair superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Supply & fix in repair 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe all as specified and directed

Material and labour plain Cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone agg) in foundation, filling mass concrete complete all as specified and directed

Supply and fixing solid PVC wall lining in repair consiting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed

Material and labour Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified.

Material and labour Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified.

Supply & fix in repair brass chromium plated toilet paper holder complete all as specified and directed

Materials and labour for applying one coats of exterior emulslon paint (weather proof) over prepared surface of walls complete all as specified and directed.

Material & labour for complete removal of existing treatment of walls and applying wall care putty to make surface even and smooth complete all as specified and directed.

Material and labour for old decorated, plastered or unplastered surface of walls and applying one coat of cement base paint all as specified and directed.

Preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and directed.

All as per Item No.130 above but applying one coat of white wash on ceiling.

Material and Labour for old decorated, plastered or unplastered surface of walls and applying two coat of oil bound distemper complete all as specified and directed.

All as per item No 132.00 above but one coat of oil bound distemper on old wall surface complete all as specified and directed

Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Item No134.00 above but on steel surface complete all as specified and directed.

Excavation in treaches n exc 1.50m wide and n. exc 1.50m in depth for foundation etc n. exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed

Returning filling in including spreading levelling and well ramming in soft/loose soil complete all as specified

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point complete all as specified and directed

Supply & fix in repair brass chromium plated wall mixer (three in one) suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed by Engr-in-Charge.

Supply & Fix in repair for steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally through out all around with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongeries shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately complete all as specified and directed .

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed. by Engineer-in-charge.

Jay Ambay Enterprises

Tayal Builders

M/S AMAR ELEKTRO CENTRE

SHAKTI CONSTRUCTION CO

M/s D.K.Enterprises

m/s gupta construction

Shivam Construction Co.

P K ASSOCIATES