REPAIR TO ROADS ROAD MARKING PAINTING AND CONNECTED WORKS AT 2W DET NCB AND NAD UNDER AGE BR I IN GE GOMANTAK

Amount

M&L for repairs to pot holes of depth not exceeding 30mm and area not exceeding 1.00 Sqm each including sweeping free from dust and mud or water scoring sunken surface in roads path etc cutting around edges to at least 25mm in depth making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2cm thick), well rammed and sealed with premix sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n.exc 30mm complete all as specified and directed.

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces not exc 50mm deep and in area not exc 400 sqm complete all as specified and directed.

M&L for repair to potholes any depth, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for applying evenly a priming tack coat with bituminous primer 10 Kg per 10 sqm using paving bitumen on potholes surfaces complete all as specified and directed.

M&L for Premix bituminous, macadam consolidated thickness 75mm or less with 4% binder contents by weight of total mix laid/rolled and compacted to required gradient and camber ccomplete all as specified and directed.

M&L preparing existing old black top road surfce by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the clean surface with gunny bags to remove all loose dust complete all as specified and directed.

M&L for applying evenly a priming tack coat with bituminous primer 5 Kg per 10 sqm using paving bitumen on existing black top surface complete all as specified and directed.

M&L for Semi Dense Asphaltic Concrete (SDAC) carpet 40 mm thick (consolidated thickness ) using graded crushed stone chipping as specified and paving bitumen binder not less than 5.5 % by weight of total mix (The exact quantity of binder shall be determinated by design mix by marshal method) including loading of aggregate in hot mix plant 20 to 40 TPH transporting the mixed material with tipper and laying with mechanical paver 30 to 40 TPH to the required level and gradient rolling with power roller as specified and compacted to required camber and gradient etc complete all as specified and directed.

M&L for laying 2.5 mm thick hot applied thermo plastic compound including reflector rising glass beads @ 250 gm per Sqm area as per IRC 35 including levelling to uniform surface free from streaks and holes etc complete all as specified and directed as per MORTH specification 803 complete all as specified and directed.

S&F of dual directional reflective cat eye with two stand of impact resistant plastic 100x80x15mm ultra violet resistant yellow colour having micro prismatic/cube corner reflectors suitable for fixing with 2 steel zinc plated 12 x 120 mm nails + epoxy/ bitumen adhesive complete all as specified and directed.

M/S jvsr constructions (BID ID -3142054)