REPAIR/MAINT OF EXTERNAL WATER SUPPLY PIPELINES, BOREWELLS, SEWAGE WELLS AT MANESAR ARMY CAMP, DUNDAHERA MIL STN AND INDUBINOLA UNIVERSITY UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft/loose soil complete all as specified and as directed.

Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed.

Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and as directed.

Taking up Cast Iron/Ductile Iron water mains (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead complete all as specified and as directed. of the following sizes:-

50 mm bore

80 mm bore

100 mm bore

150 mm bore

Laying only in trenches GI/CI/DI pipes with socket and spigot ends, cleaning thoroughly and removal of all blockages if any complete all as specified and as directed. for the following size/bore of pipes. Note:-Joints and CI/DI fittings shall be measured and paid seperately

50 mm bore

80 mm bore

100 mm bore

150 mm bore

Supplying, laying, jointing, testing and commmisioning of DI Pipe as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches all complete including taking down of old unserviceable DI pipe complete all as specified and as directed at site for the following sizes:- Note:-Joints shall be measured and paid separetely

80 mm bore

100 mm bore

M&L for CI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs upto 150mm bore confirming to IS: 1538-1993 complete all as specified and as directed.

M&L for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs upto 150mm bore confirming to IS: 9523 complete all as specified and as directed.

M&L for Run lead joint including jointing material for CI/DI pipe complete all as specified and as directed of following size/bore:-

80 mm bore

100 mm bore

M&L for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe complete all as specified and as directed of following size/bore :-

80 mm bore

100 mm bore

Supplying, laying, jointing, welding & testing MS Pipe (Heavy duty class 'C') laid in trenches or on floors for connections to centrifugal pump sets for suction, pump to header and to connect out going water main CI/DI pipe line including taking down of existing old unserviceable pipe complete all as specified and as directed. Note:- MS Flanges and Flange joints complete with jointing materials shall be measured and paid separately.

100 mm bore

150 mm bore

S&F MS flanges of 100 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.

S&F MS flanges of 150 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.

M&L for Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and as directed.

80 mm bore

100 mm bore

150 mm bore

Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

50 mm bore

80 mm bore

100 mm bore

150 mm bore

Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

100 mm bore

Supply and fixing CI foot valve flanged ends, swing type opration with rubber sheet, as per IS:4038 including taking out unsv foot valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

100 mm bore

150 mm bore

Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of 100 mm bore and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv water meter complete all as specified and as directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.

Taking up or down GI tubing and connections of the following sizes from trenches/wall/floor including cleaning for refixing or removal complete all as specified and as directed:-

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Fixing only GI pipe medium grade with all fittings fixed complete to walls and ceiling or in floors on old/new position complete all as specified and as directed. of following sizes :-

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

S&F gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unsv gate valves complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Labour for cutting of CI /DI/GI pipe in position for reducing to required length for insertion of new tees, branches etc of 100 to 150 mm bore complete all as specified and as directed.

M&L for fixing of water pressure gauge (0-5 Kg/cm square) 100mm dial size including boring, threading, welding in CI/DI/GI of any sizes and connected with suitable size of U type MS/CP pipe with ON OFF cock including taking out of existing old one complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2, using 40 mm graded stone aggregate as in foundation of brick pillar to support the pipe line including demolition of old PCC and removing the debris from site complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6M mean radius built in CM (1:4) as in brick pillar of required size and shape to support the pipe line including demolition of old brickwork & removing from site complete all as specified and as directed.

M&L for rendering 10 mm thick with cement mortar (1:6) on fair faces of brick work / concrete surfaces, finished the surface even and fair complete all as specified and as directed.

Taking out sluice valve, foot valve, refacing, regrinding, rubber gasket changes, stem nut & bolts and refixing the same serviceable condition with flange joints including nut, bolt and double washers of following sizes complete all as specified and as directed.

100 mm bore

150 mm bore

M&L for GI tubing 'medium grade' with all accessories including bends, elbow, socket including taking down existing old unserviceable GI pipe complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

Supply, installation and testing flanged ends strainer/dirt box of 100mm bore with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv strainer/dirt box complete all as specified and as directed. Note:- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.

Supply, lowering and fixing GI Column pipe heavy duty flanged & drilled ISI marked 80 mm dia, as per IS-1239, 3 Mtr long, GI flange 12mm thick, slots cutting in flanges for passing of submersible cable including all jointing material such as bolts, nuts, washers & packing sheet and connecting complete all as specified and as directed.

Supply, lowering and fixing GI Column pipe heavy duty flanged & drilled ISI marked 50 mm dia, as per IS-1239, 3 Mtr long, GI flange 12mm thick, slots cutting in flanges for passing of submersible cable including all jointing material such as bolts, nuts, washers & packing sheet and connecting complete all as specified and as directed.

S&F in repairs fully automatic star delta starter with sheet metal encloser ML-2 with relay range 20-32 Amp suitable for 20 HP centrifugal pump complete all as specified and as directed.

S&F in repairs fully automatic star delta starter with sheet metal encloser ML-1 with relay range 10-16 Amp suitable for 15 HP centrifugal pump complete all as specified and as directed.

S&F in repairs fully automatic star delta starter with sheet metal encloser ML-1 with relay range 9-14 Amp suitable for 10.5 HP centrifugal pump complete all as specified and as directed.

S&F in repairs old unserviceable overload relay MN 4-6/ MN 6-10 /MN 9-14 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of overload relay and make the connection after replacement of overload realy.

S&F in repairs old unserviceable overload relay MN 20-32 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of relay and make the connection after replacement of realy.

S&F in repairs old unserviceable contactor MNX 18 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of contactor and make the connection after replacement of contactor.

S&F in repairs old unserviceable contactor MNX 25 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of contactor and make the connection after replacement of contactor.

S&F in repairs old unserviceable contactor MNX 32 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of contactor and make the connection after replacement of contactor.

S&F in repairs old unserviceable contactor MNX 40 Amps and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of contactor and make the connection after replacement of contactor.

S&F in repairs old unserviceable single phase preventor and connected internal wiring suitable for 10 HP motor starter complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of single phase preventorr and make the connection after replacement of single phase preventor.

S&F in repair old unserviceable single phase preventor and connected internal wiring suitable for 15 HP motor starter complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of single phase preventorr and make the connection after replacement of single phase preventor.

S&F in repairs old unserviceable phase sequence corrector relay 440V , 50 HZ Supply suitable for 15 HP motor starter and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of phase sequencer and make the connection after replacement of phase sequencer.

S&F in repairs old unserviceable phase sequence corrector relay 440 Volts, 50 HZ suitable for 10 HP motor starter and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of phase sequencer and make the connection after replacement of phase sequencer.

S&F in repairs old unserviceable phase sequence corrector relay 440 Volts, 50HZ suitable for 7.5 HP motor starter and connected internal wiring complete all as specified and as directed. Note:- The rate is inclusive of connection out the starter before replacement of phase sequencer and make the connection after replacement of phase sequencer.

S&F in repairs old unserviceabel digital voltmeter of range 0-500 volts and connected internal wiring suitable for submersible/ booster/ sewage motor starter complete all as specified and as directed.

S&F in repairs old unserviceabel digital Ammeter of range 0-100 Amps and connected internal wiring suitable for submersible/ booster/ sewage motor starter complete all as specified and as directed.

S&F in repairs old unserviceable indication lamp in R,Y,B colour and connected internal wiringin for motor starter complete all as specified and as directed.

S&F in repairs old unserviceable Rotary switch and connected internal wiring for motor starter complete all as specified and as directed.

S&F in repairs old unserviceable push button and connected internal wiring for motor starter complete all as specified and as directed.

M&L for spray painting (including bringing compressor of suitable size at site) old painted steel or iron surface of (12.5 to 35 KVA) DG set complete with engine, alternator, radiator, exhaust hood and other satandard fittings & attachments (excluding diesel tank) as per existing colour scheme and pattern with atleast one coats of synthetic enameled paint after duly preparing the surface by cleaning with scrapers and emrey paper to the entire satisfaction of Engr-in-Charge and complete all as specified and as directed.

M&L for spray painting (including bringing compressor of suitable size at site) old painted steel or iron surface of centrifugal pumping set 5 to 25 HP complete with motor, pump, base frame and other satandard fittings & attachments as per existing colour scheme and pattern with atleast one coats of synthetic enameled paint after duly preparing the surface by cleaning with scrapers and emrey paper to the entire satisfaction of Engr-in-Charge and complete all as specified and as directed.

M&L for development of tube well for improvement of water yield by 630 CFM compressor including taking out existing submersible pump set complete with pipe and cable and lowering the same after water yield improvement including necessary T&P and minor spare parts complete all as specified and as directed.

M&L for Lifting of submersible pumping set of any capacity from deep bore well with chain and pulley arrangement including lowering down the submersible pump set after repair complete all as specified and as directed.

M&L for complete overhauling/repair of defective submersible pump of 5-7.5 HP and replacement of following spares of pumps of capacity 5HP to 7.5 HP, 3 phase motor driven (excluding motor) cast iron/cast steel body complete and connecting with motor portion complete all as specified and as directed. Note : Spare parts shall be measured and paid seperately here-in-after as "Supply only"

Supply only CI Stage bowl.

Supply only GM neck ring.

Remetling of GM impeller turning.

Supply only GM DOL bush.

Supply only SS stud with nut.

Supply only Water seal

Supply only Revolving disc

Supply only EPV Impeller.

Supply only Impeller key.

Repairing of stamping of stator.

Supply only CI DOL piece.

Supply only SS coupling with key.

Supply only CI Suction piece.

Supply only GM sand guard.

M&L for complete overhauling/repair of defective submersible pump of 10-12.5 HP and replacement of following spares of pumps of capacity 10HP to 12.5 HP, 3 phase motor driven (excluding motor) cast iron/cast steel body complete and connecting with motor portion complete all as specified and as directed. Note : Spare parts shall be measured and paid seperately here-in-after as "Supply only"

Supply only CI Stage bowl.

Supply only GM neck ring.

Remetling of GM impeller turning.

Supply only GM DOL bush.

Supply only SS stud with nut.

Supply only EPV Impeller.

Supply only Impeller key.

Repairing of stamping of stator.

Supply only CI DOL piece.

Supply only SS coupling with key.

Supply only CI Suction piece.

Supply only GM sand guard.

Labour only for Opening the submersible pump set/sewage pump/Booster/centrifugal/monoblock set of capacity 5 HP to 25 HP including taking down/out the burnt winding wire cleaning the slots, rewinding the motor with super enamelled copper winding wire of existing gauge, weight etc, repairing the same by replacing the unserviceable parts including machine/ lathe work and re-assembling the pump set in original position with required insulating material to make it fully functional complete all as specified and as directed. Note:-The copper required for rewinding will be measured and paid separately under relevant item.

Supplying and assembling super enamelled copper winding wire of appropriat gauge and weight suitable up to 25HP pumping sets complete all as specified and as directed.

S&F in repairs following spares of motor of capacity 5 HP to 12.5 HP complete all as specified and as directed.

GM bearing bush.

SS Rotor sleeve.

Cable seal.

Thrust bearing.

Thrust Plate

Sealing Ring.

Motor seal 10 mm

Motor seal 25 mm

O ring

CI Lower housing.

CI upper housing.

Remetling of rotar & turning.

S&F in repairs submersible cable flat 6 Sqmm 3 core for bore well of any depth with fitting and connections complete all as specified and as directed.

S&F in repairs submersible cable flat 10 Sqmm 3 core for bore well of any depth with fitting and connections complete all as specified and as directed.

M&L for preparation of monoblock pump of capacity up to 15HP at site and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.

Openinng the submersible pump set/booster pump/sewage pump set of capacity 5.00 to 25 HP including taking down/out the burnt winding wire cleaning the slots,rewinding the motor with super enamelled copper winding wire of existing gauge,weight etc,repairing the same by replacing the unserviceable parts including machine/lathe work and re- assembling the pumpset in original position with required insulating material to make it fully functional complete all as specified and as directed.

S&F in repairs following spares of booster pumping set of capacity up to 25 HP complete all as specified and as directed.

bearing

brass Impeller

Glands packing

Alignment of motor shaft including Lathe work complete all as specified and as directed.

Supply in replacement of old unserviceable chlorine water testing chloroscope type kit for testing of water complete all as specified and as directed.

Servicing of DG set upto 30 KVA of any make at Khanpur Army camp,Dundahera Mil station,Manesar Army camp by taking out U/S spares, Cleaning by brushing to remove dust including cleaning of filter,Checking of all nuts, bolts tightening whereever necessary, check up engine oil level, coolant level and Labour for top up if necessary, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc. greasing oiling and checking For smooth functioning of DG Set complete all as specified and as directed. Note:- 1. Any spares, Engine oil, coolant, unserviceable spares required to be replaced shall be measured paid for separately here-in-after under respective items as "S&F/M&L". .2. Minor spares like nuts, bolts etc cost up to Rs 200 shall be included in the rate quoted above.

M&L for "B" Check DG set upto 30 KVA of any make at Khanpur Army camp,Dundahera Mil station,Manesar Army camp by taking out U/S spares, Cleaning by brushing to remove dust including labour for Changing engine oil, coolant etc to max level, adjustment belt tension,Tuning of engine, adjustment of speed, alternator voltage, frequency etc. greasing oiling and checking For smooth functioning of DG Set. Note:- Any spares, Engine oil, coolant, unserviceable spares required to be replaced shall be measured and paid separately under respective items as "S&F/M&L"

S&F oil filter set for 20 to 35 KVA DG set complete all as specified and as directed.

S&F starter key switch for 20 to 35 KVA DG set complete all as specified and as directed.

S&F of Battery Terminal made of brass nut & bolt complete all as specified and as directed.

M&L for repair and calibration to fuel injection pump & nozzle for 20 to 35 KVA DG set complete all as specified and as directed.

S&F fuel filter set for 20 to 35 KVA complete all as specified and as directed.

S&F pipe (Fuel line) set for 20 to 35 KVA complete all as specified and as directed.

S&F radiator hose pipe set for 20 to 35 KVA complete all as specified and as directed.

M&L for engine oil as per manufacturers suggested grade complete all as specified and as directed.

M&L for Topping up of coolant complete all as specified and as directed.

S&F in repairs temperature gauge for DG Set complete all as specified and as directed. Make : (As per sample)

S&F in repairs Off load Changeover Switch - AC 23 (side handle) in sheet enclosure, 415 Vac, 50 Hz. 4 pole 100 Amp/415 volts on load side handle operated type inclduing taking down old change over complete all as specified and as directed. Cat Part No IHBFFE0100 of Havells or equipvalent Make : HPL/L&T/Standard.

S&F in repairs battery 180 Ah,12 Volts maintencance free including battery termail alongwith connectiing wire of suitable gauge upto 2 mtr length min as required on site complete all as specified and as directed. Make:- Exide/Amaron/ Luminious.

M&L for cleaning of semi under ground sump of storage capacity of water up to 25000 gallons thoroughly by removing mud, dirt etc. from the sump by the following method complete all as specified and as directed.:- (a) Cleaning inner surface of the tank by scraping with steel wire brushes and removing mud and sludge collected in and outside of the tank and removing sludge to a distance not exceeding 50 meter. (b) Washing with clean water thoroughly complete tank internally and finally cleaning with bleaching powder. (c) writing date of cleaning on the sump.

Comprehensive, preventive and periodical maintenance of RO Plant (01 Nos) of capacity 1000 LPH Make: AQUAFRESH installed at Dundahera Mil station in reliable, safe and efficient manner by regular examining, lubricating and adjusting the mechanical and electrical driving equipment including repacement of defective/spares parts as "Supply only" and testing on completion to the entire satisfaction of Engr-in-Charge/GE and complete all as specified and as directed. Notes:- (i) Spare parts will be measured & paid separately. (ii) All the complaints will be rectified within 24 hrs from the time of receipt of complaint. If contractor fails to rectify the complaint within 24 hrs from the time of receipt of complaint, the compensation/penalty of Rs.500.00 per complaint per day shall be recovered from the contractor's dues.

Removing the existing media and supply and filling of dual media of same size as removed for DMF of RO plant at Dundahera Army camp without damaging the plant, pipelines and other accessories and leading the removed media upto 2km complete all as specified and as directed.

Removing the existing media and supply and filling of carbon media for activated carbon filter of RO plant at Dundahera Army camp without damaging the plant, pipelines and other accessories and leading the removed media upto 2km complete all as specified and as directed.

Supply only in repair of micron filter (1000 LPH/20 inch) to remove particle up to 20 micron and reduce silt density index further to acceptable levels complete all as specified and as directed.

Supply only in repair of reverse osmosis membrane system (brackish water) to remove major part of TDS (85-95%) with sundry fitting, arrangement & skid to meet adequate permate of minimum 50% recovery complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

amisha trading co

Rahul Enterprises

P R Constructions

Chaudhary Constructions

NAVYUG VYAPARI

Shrikanth Solutions