COMPREHENSIVE MAINT OF FIRE FIGHTING INSTALLATION, FIRE FIGHTING DETECTION SYSTEM AND OTHER CONNECTED WORKS IN AGV AT AF STN CHAKERI, KANPUR

Amount

Preventive maintenance & repairs of fire alarm system and fire fighting including control panels for detection system by means of their cleaning, checking of circuits including recalibration and testing including replacement of defective parts to make them serviceable alongwith the preventive maintenance of following items complete all as specified and directed:- (a) Fire Pump of Capacity 100HP - 01 No (b) Jockey Pump 12.5 HP - 01 No (c) Diesel Engine 85.5 KVA - 01 No (d) Terrace Pump of Capcity 7.5 HP - 11 No (e) Zone Panel consisting of Zone card and Power Card -11 No (f) Main control panel of 16 zone with 500 W PA system - 01 No Note: (a) Panel shall be checked as per requirement as directed by Engr-in-Charge. (b) Spares shall be measured and paid separately under relavent item of schedule as supply only. (Sl Item No 3.00 to 12.00) (c) If complaint not rectified within 24 hrs then penality @ 2000/per day will be recovered.

Preventive maintenance of fire hadder booster pump 7.5 HP by taking down from terrace of each block of building including cleaning, oiling, greasing & changing the defective parts such as fan bearing etc and painting complete all as specified and directed.

Supply only Bearing of centrifugal pump 100 HP existing size complete all as specified and directed. Make: SKF/Tata/NBC

Supply only Bearing of Jockey pump 12.5 HP existing size complete all as specified and directed. Make: SKF/Tata/NBC

Supply only Bearing of Jockey pump 7.5 HP existing size complete all as specified and directed. Make: SKF/Tata/NBC

Supply only rubber bush for coupling complete all as specified and directed.

Supply only Gland bush set complete all as specified and directed.

Supply only of Mechanical Seal for 100 HP complete all as specified and directed. Make: Kirloskar or other make as approved by GE

Supply only of Mechanical Seal for 7.5 HP complete all as specified and directed. Make: Kirloskar or other make as approved by GE

Supply only Oil filter for Fire DG Set complete all as specified and directed. Make: Mico or other make as approved by GE

Supply only Diesel filter Fire DG Set complete all as specified and directed. Make: Mico or other make as approved by GE

Supply only Coolant for radiator complete all as specified and directed.

Supply only Engine oil as per OEM recommendation complete all as specified and directed.

M&L for dismantling and rewinding of motor 7.5 HP capacity of same gauge super enemmaled copper winding wire including insulating papper & testing complete all as specified and directed.

M&L for dismantling and rewinding of motor 12 HP capacity of same gauge super enemmaled copper winding wire including insulating papper & testing complete all as specified and directed.

M&L for taking down & overhouling of fire hose reel drums by changing of clip, greasing to swing smothly and refixing the same complete all as specified and directed.

S&F in replacement fire hose reel drum ISI marked & confirming to relevent IS for 20 mm hose pipe of fire hadder complete all as specified and directed. Make: GTech/Newage/JMC/Omex/Mini Max

S&F in replacement Zubli clip for 20 mm dia hose reel pipe complete all as specified and directed.

S&F in replacement fastner / Nut bolt for fixing the hose reel as per existing size complete all as specified and directed.

S&F in replacement Air release valve for fire hadder near fire pump installed at tarrace of building complete all as specified and directed. Make: Zoloto/SANT/Kartar

Dismantling and cleaning of smoke cum heat detector from ceiling in every three months and refixing the same and testing complete all as specified and directed.

S&F in replacement multisensor (combination of heat & smoke) confirming to IS complete all as specified and directed. Make: APOLLO/ System sensor/ Morley

S&F in replacement of gun metal landing valve single headed 80 mm dia, flanged inlet 63 mm dia instant type female outlet complete with gun metal & cap & chain twist release type lug ISI marked & confirming to relevent IS complete all as specified and directed. Make: GTech /Newage or other make as approved by GE

S&F in replacement for fire brigade inlet connection 2 way type ISI marked & confirming to relevent IS complete all as specified and directed. Make: GTech / Newage or other make as approved by GE

S&F in replacement of 63 mm dia RRL hose pipe 15 m long with male & female SS couplings bend riveted to hose pipe ISI marked & confirming to relevent IS complete all as specified and directed. Make: Newage / Dunlop / Cosmos / Flameguard

S&F in replacement of 20 mm dia rubber hose pipe 30 m long with fixing arrangement ISI marked & confirming to relevent IS complete all as specified and directed. Make: GTech / Newage / Ronak

S&F in replacement of 20 mm dia gun metal nozzle ISI marked & confirming to relevent IS complete all as specified and directed. Make: GTech/Newage/JMC

S&F in replacement of 63 mm brass nozzle ISI marked & confirming to relevent IS complete all as specified and directed. Make: GTech/Newage/JMC

S&F in replacement of manual call point with push button fired bride MS box duly painted sealed with glass including necessary electrical connection complete all as specified and directed. Make: Agni/Alarm/NSD

S&F in replacement of low intensity hooter of 10 watt for warning of fire connected with central control panel installed in each zone complete all as specified and directed. Make: Agni/Alarm/NSD

M&L in replacement of Hose box made of 18 gauge MS Sheet 800mm x 600mm x 250 mm with 4 mm thick glasses and door frame made of 16 gauge MS Sheet painted fire red out side and brilliant white inside yard complete all as specified and directed.

M&L for repair of Microprocessor based detection system gas release control panel of 10 zone mounted on wall outside the room made of mild steel sheet confiming to IS 513-1986, minimum 1.6 mm thick, Colour of the panel shall be fire red (shade No 536 of IS 5-1978) with gas release facility including all the wiring, fitting and accessaries and time delay arrangement (with setting for 30-60 sec) for flooding of gas auto and manual mode including battery charger unit with boost & trickle charger, battery box, connections to building automation system and taking down of old panel complete all as specified and directed. Make: Agni device / Honeywell / ASE Note: Old unserviceable materials will be deposited by the contractor in E/M Store yard.

S&F in replacement MS ERW pipe 80 mm bore ISI marked including cutting and welding , fittings for fire hydrant and testing complete all as specified and directed. Make: Jindal/Tata/Prakash Surya

All as per item no 33.00 but pipe size 150 mm. Make: Jindal/Tata/Prakash Surya

All as per item no 33.00 but pipe size 200 mm. Make: Jindal/Tata/Prakash Surya

S&F in replacement PVC insulated, sheathed electric cable FRLS 1100V grade two core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in non metallic rigid PVC concealed conduit complete all as specified and directed.

S&F in replacement of pressure switch confirming to IS complete all as specified and directed. Make: Agni/Alarm/NSD/Indfos

M&L for painting of steel and iron surfaces such as rising/distribution lines /over head tank lines with two coat of synthetic enemelled paint after preparation of old painted surfaces complete all as specified and directed.

S&F in replacement pressure gauge 4" dia (0-14 Kg) rating ISI marked complete all as specified and directed. Make: Guru/Jackson or other make as approved by GE

S&F in replacement butterfly valve 100 mm dia ISI marked & confirming to relevent IS complete all as specified and directed. Make: Leader/Zoloto/Sant

All as per item No 40.00 but 150 mm Bore. Make: Leader/Zoloto/Sant

All as per item No 40.00 but 200 mm Bore. Make: Leader/Zoloto/Sant

S&F in replacement Non return valve (NRV) of size 150 mm ISI marked & confirming to relevent IS for fire hadder including nut,bolt & washer complete all as specified and directed. Make: Kirloskar/Upadhyay/Kartar

S&F in replacement of Branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet 15 mm bore nozzle short complete all as specified and directed.

S&F in replacement of gun metal landing valve coupling 63 mm dia brass complete all as specified and directed.

S&F in replacement MCCB TP, 415V, 200 Amps with breaking capacity 10 KA complete all as specified and directed. Make: L&T/Legrand/Siemens

S&F in replacement Copper conductor PVC sheathed cable stranded 3 core of size 16 Sqmm multistarnd with suitable copper lugscomplete all as specified and directed. Make: Havells/Finolex/Polycab/Paragon

S&F in replacement Contactor Model No MNX-140 making proper connection with suitble lugs complete all as specified and directed. Make: L&T/Siemens/Legrand

S&F in replacement Single phase preventer complete all as specified and directed. Make: L&T/Legrand/Minilek

S&F in replacement MCB 63 Amps, TPN, 415 volts, 'C' Curve AC 10 kA complete all as specified and directed. Make: L&T/Legrand/Siemens

S&F in replacement battery 180 AH complete all as specified and directed. Make: Exide/Amaron/Amco/Tata

S&F in replacement automatic battery charger for existing make complete all as specified and directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M&L for providing PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars complete all as specified and directed.

S&F in replacement control globe valve/ball valve of size 25 mm ISI marked & confirming to relevent IS for 20 mm dia hose pipe of fire hadder complete all as specified and directed. Make: Leader/Zoloto/Sant