CYCLE SHED AND SHOWCASE FOR HANDICRAFT TRAINING CUM PRODUCTION CENTRE AT MINICOY

Amount

Providing and laying cement concrete 1: 4:8 ( 1 cement: 4M.Sand: 8granite chips ) foundation and plinth.Stone aggregate 40mm nomonal size.

Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4granite chips ) finished with floating coat of neat cement,including cement slurry ,but excluding the cost of noising ofsteps etc…complete

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mmdiameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approvedsteel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.10.1.1 1.00mm thick with zinc coating not less than 275gm/m2

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed

Providing and laying cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4granite chips 20 mm nomoinal size) foundation and plinth.

Providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer.- GI pipe as directed by the engineer in charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: as directed by the engineer in charge.

Painting Steel work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.80 ltr/10 sqm of approved and manufacture

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):For fixed portion. 15.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge

Providing and fixing Pre-laminated medium density particle board exterior grad (Grade1) IS:14587:1998 marked,to frame,backing orstudding with screws etc..( Frame,backing or studding to be paid separately) Pre- laminated with decorative lamination on both side exterior grade-1 MDF board 18 mm thick confirming to IS 14587

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):15.4.1 With float glass panes of 4.0 mm thickness

C H Kunhikoya

Team Constructions

A J ENTERPRISES

E P Firose Khan Koya

Nadheem Enterprises

Akbarali D N